4226 lines
188 KiB
Plaintext
4226 lines
188 KiB
Plaintext
coreboot-gnuboot-0.1-rc3 Wed Mar 13 13:44:58 UTC 2024 romstage starting (log level: 7)...
|
|
CPU APICID 00 start flag set
|
|
BSP Family_Model: 00600f12
|
|
*sysinfo range: [000c2f60,000cd4cc]
|
|
bsp_apicid = 00
|
|
cpu_init_detectedx = 00000000
|
|
sb700 reset flags: 0020
|
|
WARNING: MC4 Machine Check Exception detected on node 0!
|
|
Signature: f200021008010c0f
|
|
ERROR: FMAP cache corrupted?!
|
|
FMAP: Found "FLASH" version 1.1 at 0x0.
|
|
FMAP: base = 0xffe00000 size = 0x200000 #areas = 3
|
|
FMAP: area COREBOOT found @ 200 (2096640 bytes)
|
|
CBFS: 'COREBOOT Locator' located CBFS at [200:200000)
|
|
CBFS: Locating 'microcode_amd.bin'
|
|
CBFS: 'microcode_amd.bin' not found.
|
|
[microcode] microcode file not found. Skipping updates.
|
|
cpuSetAMDMSR done
|
|
Enter amd_ht_init
|
|
AMD_CB_EventNotify: INFO: HT_EVENT_COH_NODE_DISCOVERED: node 0 link 2 new node: 1
|
|
AMD_CB_EventNotify: INFO: HT_EVENT_COH_NODE_DISCOVERED: node 0 link 0 new node: 2
|
|
AMD_CB_EventNotify: INFO: HT_EVENT_COH_NODE_DISCOVERED: node 0 link 3 new node: 3
|
|
Forcing HT links to isochronous mode due to enabled IOMMU
|
|
Exit amd_ht_init
|
|
amd_ht_fixup
|
|
amd_ht_fixup: node 0 (internal node ID 0): disabling defective HT link (L3 connected: 1)
|
|
amd_ht_fixup: node 1 (internal node ID 1): disabling defective HT link (L3 connected: 1)
|
|
amd_ht_fixup: node 2 (internal node ID 0): disabling defective HT link (L3 connected: 1)
|
|
amd_ht_fixup: node 3 (internal node ID 1): disabling defective HT link (L3 connected: 1)
|
|
cpuSetAMDPCI 00 done
|
|
cpuSetAMDPCI 01 done
|
|
cpuSetAMDPCI 02 done
|
|
cpuSetAMDPCI 03 done
|
|
Prep FID/VID Node:00
|
|
F3x80: e20be281
|
|
F3x84: 01e200e2
|
|
F3xD4: c3312f18
|
|
F3xD8: 03000016
|
|
F3xDC: 05475632
|
|
Prep FID/VID Node:01
|
|
F3x80: e20be281
|
|
F3x84: 01e200e2
|
|
F3xD4: c3312f18
|
|
F3xD8: 03000016
|
|
F3xDC: 05475632
|
|
Prep FID/VID Node:02
|
|
F3x80: e20be281
|
|
F3x84: 01e200e2
|
|
F3xD4: c3312f18
|
|
F3xD8: 03000016
|
|
F3xDC: 05475632
|
|
Prep FID/VID Node:03
|
|
F3x80: e20be281
|
|
F3x84: 01e200e2
|
|
F3xD4: c3312f18
|
|
F3xD8: 03000016
|
|
F3xDC: 05475632
|
|
setup_remote_node: 01 done
|
|
Start node 01 done.
|
|
setup_remote_node: 02 done
|
|
Start node 02 done.
|
|
setup_remote_node: 03 done
|
|
Start node 03 done.
|
|
WARNING: MC4 Machine Check Exception detected on node 1!
|
|
Signature: e90c5ed9ba0e6457
|
|
WARNING: MC4 Machine Check Exception detected on node 2!
|
|
Signature: df65956f00014c4f
|
|
WARNING: MC4 Machine Check Exception detected on node 3!
|
|
Signature: be77dd887f17edb5
|
|
core0 started: 01 02 03
|
|
sr5650_early_setup()
|
|
get_cpu_rev EAX=0x600f12.
|
|
CPU Rev is Fam 15.
|
|
NB Revision is A12.
|
|
fam10_optimization()
|
|
sr5650_por_init
|
|
Enabling IOMMU
|
|
sb700_early_setup()
|
|
sb700_devices_por_init()
|
|
sb700_devices_por_init(): SMBus Device, BDF:0-20-0
|
|
SMBus controller enabled, sb revision is A15
|
|
sb700_devices_por_init: Disabling ISA DMA support
|
|
sb700_devices_por_init(): IDE Device, BDF:0-20-1
|
|
sb700_devices_por_init(): LPC Device, BDF:0-20-3
|
|
sb700_devices_por_init(): P2P Bridge, BDF:0-20-4
|
|
sb700_devices_por_init(): SATA Device, BDF:0-17-0
|
|
sb700_pmio_por_init()
|
|
start_other_cores()
|
|
NOTICE: read_option() used to access CMOS from non-ROMCC code, please use get_option() instead.
|
|
init node: 00 cores: 07 pass 1
|
|
Start other core - nodeid: 00 cores: 07
|
|
get_boot_apic_id: using 2 as APIC ID for node 0, core 2
|
|
get_boot_apic_id: using 4 as APIC ID for node 0, core 4
|
|
get_boot_apic_id: using 6 as APIC ID for node 0, core 6
|
|
init node: 01 cores: 07 pass 1
|
|
Start other core - nodeid: 01 cores: 07
|
|
get_boot_apic_id: using 10 as APIC ID for node 1, core 2
|
|
get_boot_apic_id: using 12 as APIC ID for node 1, core 4
|
|
get_boot_apic_id: using 14 as APIC ID for node 1, core 6
|
|
init node: 02 cores: 07 pass 1
|
|
Start other core - nodeid: 02 cores: 07
|
|
get_boot_apic_id: using 34 as APIC ID for node 2, core 2
|
|
get_boot_apic_id: using 36 as APIC ID for node 2, core 4
|
|
get_boot_apic_id: using 38 as APIC ID for node 2, core 6
|
|
init node: 03 cores: 07 pass 1
|
|
Start other core - nodeid: 03 cores: 07
|
|
get_boot_apic_id: using 42 as APIC ID for node 3, core 2
|
|
get_boot_apic_id: using 44 as APIC ID for node 3, core 4
|
|
get_boot_apic_id: using 46 as APIC ID for node 3, core 6
|
|
started ap apicid: NOTICE: read_option() used to access CMOS from non-ROMCC code, please use get_option() instead.
|
|
get_boot_apic_id: using 1 as APIC ID for node 0, core 1
|
|
* AP 01started
|
|
get_boot_apic_id: using 2 as APIC ID for node 0, core 2
|
|
* AP 02started
|
|
get_boot_apic_id: using 3 as APIC ID for node 0, core 3
|
|
* AP 03started
|
|
get_boot_apic_id: using 4 as APIC ID for node 0, core 4
|
|
* AP 04started
|
|
get_boot_apic_id: using 5 as APIC ID for node 0, core 5
|
|
* AP 05started
|
|
get_boot_apic_id: using 6 as APIC ID for node 0, core 6
|
|
* AP 06started
|
|
get_boot_apic_id: using 7 as APIC ID for node 0, core 7
|
|
* AP 07started
|
|
get_boot_apic_id: using 9 as APIC ID for node 1, core 1
|
|
* AP 09started
|
|
get_boot_apic_id: using 10 as APIC ID for node 1, core 2
|
|
* AP 0astarted
|
|
get_boot_apic_id: using 11 as APIC ID for node 1, core 3
|
|
* AP 0bstarted
|
|
get_boot_apic_id: using 12 as APIC ID for node 1, core 4
|
|
* AP 0cstarted
|
|
get_boot_apic_id: using 13 as APIC ID for node 1, core 5
|
|
* AP 0dstarted
|
|
get_boot_apic_id: using 14 as APIC ID for node 1, core 6
|
|
* AP 0estarted
|
|
get_boot_apic_id: using 15 as APIC ID for node 1, core 7
|
|
* AP 0fstarted
|
|
get_boot_apic_id: using 33 as APIC ID for node 2, core 1
|
|
* AP 21started
|
|
get_boot_apic_id: using 34 as APIC ID for node 2, core 2
|
|
* AP 22started
|
|
get_boot_apic_id: using 35 as APIC ID for node 2, core 3
|
|
* AP 23started
|
|
get_boot_apic_id: using 36 as APIC ID for node 2, core 4
|
|
* AP 24started
|
|
get_boot_apic_id: using 37 as APIC ID for node 2, core 5
|
|
* AP 25started
|
|
get_boot_apic_id: using 38 as APIC ID for node 2, core 6
|
|
* AP 26started
|
|
get_boot_apic_id: using 39 as APIC ID for node 2, core 7
|
|
* AP 27started
|
|
get_boot_apic_id: using 41 as APIC ID for node 3, core 1
|
|
* AP 29started
|
|
get_boot_apic_id: using 42 as APIC ID for node 3, core 2
|
|
* AP 2astarted
|
|
get_boot_apic_id: using 43 as APIC ID for node 3, core 3
|
|
* AP 2bstarted
|
|
get_boot_apic_id: using 44 as APIC ID for node 3, core 4
|
|
* AP 2cstarted
|
|
get_boot_apic_id: using 45 as APIC ID for node 3, core 5
|
|
* AP 2dstarted
|
|
get_boot_apic_id: using 46 as APIC ID for node 3, core 6
|
|
* AP 2estarted
|
|
get_boot_apic_id: using 47 as APIC ID for node 3, core 7
|
|
* AP 2fstarted
|
|
|
|
|
|
Begin FIDVID MSR 0xc0010071 0x52c2009e 0x3a06644c
|
|
FIDVID on BSP, APIC_id: 00
|
|
BSP fid = 0
|
|
NOTICE: read_option() used to access CMOS from non-ROMCC code, please use get_option() instead.
|
|
get_boot_apic_id: using 0 as APIC ID for node 0, core 0
|
|
get_boot_apic_id: using 1 as APIC ID for node 0, core 1
|
|
get_boot_apic_id: using 2 as APIC ID for node 0, core 2
|
|
get_boot_apic_id: using 3 as APIC ID for node 0, core 3
|
|
get_boot_apic_id: using 4 as APIC ID for node 0, core 4
|
|
get_boot_apic_id: using 5 as APIC ID for node 0, core 5
|
|
get_boot_apic_id: using 6 as APIC ID for node 0, core 6
|
|
get_boot_apic_id: using 7 as APIC ID for node 0, core 7
|
|
get_boot_apic_id: using 8 as APIC ID for node 1, core 0
|
|
get_boot_apic_id: using 9 as APIC ID for node 1, core 1
|
|
get_boot_apic_id: using 10 as APIC ID for node 1, core 2
|
|
get_boot_apic_id: using 11 as APIC ID for node 1, core 3
|
|
get_boot_apic_id: using 12 as APIC ID for node 1, core 4
|
|
get_boot_apic_id: using 13 as APIC ID for node 1, core 5
|
|
get_boot_apic_id: using 14 as APIC ID for node 1, core 6
|
|
get_boot_apic_id: using 15 as APIC ID for node 1, core 7
|
|
get_boot_apic_id: using 32 as APIC ID for node 2, core 0
|
|
get_boot_apic_id: using 33 as APIC ID for node 2, core 1
|
|
get_boot_apic_id: using 34 as APIC ID for node 2, core 2
|
|
get_boot_apic_id: using 35 as APIC ID for node 2, core 3
|
|
get_boot_apic_id: using 36 as APIC ID for node 2, core 4
|
|
get_boot_apic_id: using 37 as APIC ID for node 2, core 5
|
|
get_boot_apic_id: using 38 as APIC ID for node 2, core 6
|
|
get_boot_apic_id: using 39 as APIC ID for node 2, core 7
|
|
get_boot_apic_id: using 40 as APIC ID for node 3, core 0
|
|
get_boot_apic_id: using 41 as APIC ID for node 3, core 1
|
|
get_boot_apic_id: using 42 as APIC ID for node 3, core 2
|
|
get_boot_apic_id: using 43 as APIC ID for node 3, core 3
|
|
get_boot_apic_id: using 44 as APIC ID for node 3, core 4
|
|
get_boot_apic_id: using 45 as APIC ID for node 3, core 5
|
|
get_boot_apic_id: using 46 as APIC ID for node 3, core 6
|
|
get_boot_apic_id: using 47 as APIC ID for node 3, core 7
|
|
Wait for AP stage 1: ap_apicid = 1
|
|
readback = 1000014
|
|
common_fid(packed) = 0
|
|
Wait for AP stage 1: ap_apicid = 2
|
|
readback = 2000014
|
|
common_fid(packed) = 0
|
|
Wait for AP stage 1: ap_apicid = 3
|
|
readback = 3000014
|
|
common_fid(packed) = 0
|
|
Wait for AP stage 1: ap_apicid = 4
|
|
readback = 4000014
|
|
common_fid(packed) = 0
|
|
Wait for AP stage 1: ap_apicid = 5
|
|
readback = 5000014
|
|
common_fid(packed) = 0
|
|
Wait for AP stage 1: ap_apicid = 6
|
|
readback = 6000014
|
|
common_fid(packed) = 0
|
|
Wait for AP stage 1: ap_apicid = 7
|
|
readback = 7000014
|
|
common_fid(packed) = 0
|
|
Wait for AP stage 1: ap_apicid = 8
|
|
readback = 8000014
|
|
common_fid(packed) = 0
|
|
Wait for AP stage 1: ap_apicid = 9
|
|
readback = 9000014
|
|
common_fid(packed) = 0
|
|
Wait for AP stage 1: ap_apicid = a
|
|
readback = a000014
|
|
common_fid(packed) = 0
|
|
Wait for AP stage 1: ap_apicid = b
|
|
readback = b000014
|
|
common_fid(packed) = 0
|
|
Wait for AP stage 1: ap_apicid = c
|
|
readback = c000014
|
|
common_fid(packed) = 0
|
|
Wait for AP stage 1: ap_apicid = d
|
|
readback = d000014
|
|
common_fid(packed) = 0
|
|
Wait for AP stage 1: ap_apicid = e
|
|
readback = e000014
|
|
common_fid(packed) = 0
|
|
Wait for AP stage 1: ap_apicid = f
|
|
readback = f000014
|
|
common_fid(packed) = 0
|
|
Wait for AP stage 1: ap_apicid = 20
|
|
readback = 20000014
|
|
common_fid(packed) = 0
|
|
Wait for AP stage 1: ap_apicid = 21
|
|
readback = 21000014
|
|
common_fid(packed) = 0
|
|
Wait for AP stage 1: ap_apicid = 22
|
|
readback = 22000014
|
|
common_fid(packed) = 0
|
|
Wait for AP stage 1: ap_apicid = 23
|
|
readback = 23000014
|
|
common_fid(packed) = 0
|
|
Wait for AP stage 1: ap_apicid = 24
|
|
readback = 24000014
|
|
common_fid(packed) = 0
|
|
Wait for AP stage 1: ap_apicid = 25
|
|
readback = 25000014
|
|
common_fid(packed) = 0
|
|
Wait for AP stage 1: ap_apicid = 26
|
|
readback = 26000014
|
|
common_fid(packed) = 0
|
|
Wait for AP stage 1: ap_apicid = 27
|
|
readback = 27000014
|
|
common_fid(packed) = 0
|
|
Wait for AP stage 1: ap_apicid = 28
|
|
readback = 28000014
|
|
common_fid(packed) = 0
|
|
Wait for AP stage 1: ap_apicid = 29
|
|
readback = 29000014
|
|
common_fid(packed) = 0
|
|
Wait for AP stage 1: ap_apicid = 2a
|
|
readback = 2a000014
|
|
common_fid(packed) = 0
|
|
Wait for AP stage 1: ap_apicid = 2b
|
|
readback = 2b000014
|
|
common_fid(packed) = 0
|
|
Wait for AP stage 1: ap_apicid = 2c
|
|
readback = 2c000014
|
|
common_fid(packed) = 0
|
|
Wait for AP stage 1: ap_apicid = 2d
|
|
readback = 2d000014
|
|
common_fid(packed) = 0
|
|
Wait for AP stage 1: ap_apicid = 2e
|
|
readback = 2e000014
|
|
common_fid(packed) = 0
|
|
Wait for AP stage 1: ap_apicid = 2f
|
|
readback = 2f000014
|
|
common_fid(packed) = 0
|
|
common_fid = 0
|
|
End FIDVIDMSR 0xc0010071 0x52c2009e 0x3a06644c
|
|
sr5650_htinit: Node 0 Link 1, HT freq=e.
|
|
sr5650_htinit: HT3 mode
|
|
...WARM RESET...
|
|
|
|
|
|
soft_reset() called!
|
|
|
|
|
|
coreboot-gnuboot-0.1-rc3 Wed Mar 13 13:44:58 UTC 2024 romstage starting (log level: 7)...
|
|
CPU APICID 00 start flag set
|
|
BSP Family_Model: 00600f12
|
|
*sysinfo range: [000c2f60,000cd4cc]
|
|
bsp_apicid = 00
|
|
cpu_init_detectedx = 00000000
|
|
sb700 reset flags: 0004
|
|
ERROR: FMAP cache corrupted?!
|
|
FMAP: Found "FLASH" version 1.1 at 0x0.
|
|
FMAP: base = 0xffe00000 size = 0x200000 #areas = 3
|
|
FMAP: area COREBOOT found @ 200 (2096640 bytes)
|
|
CBFS: 'COREBOOT Locator' located CBFS at [200:200000)
|
|
CBFS: Locating 'microcode_amd.bin'
|
|
CBFS: 'microcode_amd.bin' not found.
|
|
[microcode] microcode file not found. Skipping updates.
|
|
cpuSetAMDMSR done
|
|
Enter amd_ht_init
|
|
AMD_CB_EventNotify: INFO: HT_EVENT_COH_NODE_DISCOVERED: node 0 link 2 new node: 1
|
|
AMD_CB_EventNotify: INFO: HT_EVENT_COH_NODE_DISCOVERED: node 0 link 0 new node: 2
|
|
AMD_CB_EventNotify: INFO: HT_EVENT_COH_NODE_DISCOVERED: node 0 link 3 new node: 3
|
|
Forcing HT links to isochronous mode due to enabled IOMMU
|
|
Exit amd_ht_init
|
|
amd_ht_fixup
|
|
amd_ht_fixup: node 0 (internal node ID 0): disabling defective HT link (L3 connected: 1)
|
|
amd_ht_fixup: node 1 (internal node ID 1): disabling defective HT link (L3 connected: 1)
|
|
amd_ht_fixup: node 2 (internal node ID 0): disabling defective HT link (L3 connected: 1)
|
|
amd_ht_fixup: node 3 (internal node ID 1): disabling defective HT link (L3 connected: 1)
|
|
cpuSetAMDPCI 00 done
|
|
cpuSetAMDPCI 01 done
|
|
cpuSetAMDPCI 02 done
|
|
cpuSetAMDPCI 03 done
|
|
Prep FID/VID Node:00
|
|
F3x80: e20be281
|
|
F3x84: 01e200e2
|
|
F3xD4: c3312f18
|
|
F3xD8: 03000016
|
|
F3xDC: 05475632
|
|
Prep FID/VID Node:01
|
|
F3x80: e20be281
|
|
F3x84: 01e200e2
|
|
F3xD4: c3312f18
|
|
F3xD8: 03000016
|
|
F3xDC: 05475632
|
|
Prep FID/VID Node:02
|
|
F3x80: e20be281
|
|
F3x84: 01e200e2
|
|
F3xD4: c3312f18
|
|
F3xD8: 03000016
|
|
F3xDC: 05475632
|
|
Prep FID/VID Node:03
|
|
F3x80: e20be281
|
|
F3x84: 01e200e2
|
|
F3xD4: c3312f18
|
|
F3xD8: 03000016
|
|
F3xDC: 05475632
|
|
setup_remote_node: 01 done
|
|
Start node 01 done.
|
|
setup_remote_node: 02 done
|
|
Start node 02 done.
|
|
setup_remote_node: 03 done
|
|
Start node 03 done.
|
|
core0 started: 01 02 03
|
|
sr5650_early_setup()
|
|
get_cpu_rev EAX=0x600f12.
|
|
CPU Rev is Fam 15.
|
|
NB Revision is A12.
|
|
fam10_optimization()
|
|
sr5650_por_init
|
|
Enabling IOMMU
|
|
sb700_early_setup()
|
|
sb700_devices_por_init()
|
|
sb700_devices_por_init(): SMBus Device, BDF:0-20-0
|
|
SMBus controller enabled, sb revision is A15
|
|
sb700_devices_por_init: Disabling ISA DMA support
|
|
sb700_devices_por_init(): IDE Device, BDF:0-20-1
|
|
sb700_devices_por_init(): LPC Device, BDF:0-20-3
|
|
sb700_devices_por_init(): P2P Bridge, BDF:0-20-4
|
|
sb700_devices_por_init(): SATA Device, BDF:0-17-0
|
|
sb700_pmio_por_init()
|
|
start_other_cores()
|
|
NOTICE: read_option() used to access CMOS from non-ROMCC code, please use get_option() instead.
|
|
init node: 00 cores: 07 pass 1
|
|
Start other core - nodeid: 00 cores: 07
|
|
get_boot_apic_id: using 2 as APIC ID for node 0, core 2
|
|
get_boot_apic_id: using 4 as APIC ID for node 0, core 4
|
|
get_boot_apic_id: using 6 as APIC ID for node 0, core 6
|
|
init node: 01 cores: 07 pass 1
|
|
Start other core - nodeid: 01 cores: 07
|
|
get_boot_apic_id: using 10 as APIC ID for node 1, core 2
|
|
get_boot_apic_id: using 12 as APIC ID for node 1, core 4
|
|
get_boot_apic_id: using 14 as APIC ID for node 1, core 6
|
|
init node: 02 cores: 07 pass 1
|
|
Start other core - nodeid: 02 cores: 07
|
|
get_boot_apic_id: using 34 as APIC ID for node 2, core 2
|
|
get_boot_apic_id: using 36 as APIC ID for node 2, core 4
|
|
get_boot_apic_id: using 38 as APIC ID for node 2, core 6
|
|
init node: 03 cores: 07 pass 1
|
|
Start other core - nodeid: 03 cores: 07
|
|
get_boot_apic_id: using 42 as APIC ID for node 3, core 2
|
|
get_boot_apic_id: using 44 as APIC ID for node 3, core 4
|
|
get_boot_apic_id: using 46 as APIC ID for node 3, core 6
|
|
started ap apicid: NOTICE: read_option() used to access CMOS from non-ROMCC code, please use get_option() instead.
|
|
get_boot_apic_id: using 1 as APIC ID for node 0, core 1
|
|
* AP 01started
|
|
get_boot_apic_id: using 2 as APIC ID for node 0, core 2
|
|
* AP 02started
|
|
get_boot_apic_id: using 3 as APIC ID for node 0, core 3
|
|
* AP 03started
|
|
get_boot_apic_id: using 4 as APIC ID for node 0, core 4
|
|
* AP 04started
|
|
get_boot_apic_id: using 5 as APIC ID for node 0, core 5
|
|
* AP 05started
|
|
get_boot_apic_id: using 6 as APIC ID for node 0, core 6
|
|
* AP 06started
|
|
get_boot_apic_id: using 7 as APIC ID for node 0, core 7
|
|
* AP 07started
|
|
get_boot_apic_id: using 9 as APIC ID for node 1, core 1
|
|
* AP 09started
|
|
get_boot_apic_id: using 10 as APIC ID for node 1, core 2
|
|
* AP 0astarted
|
|
get_boot_apic_id: using 11 as APIC ID for node 1, core 3
|
|
* AP 0bstarted
|
|
get_boot_apic_id: using 12 as APIC ID for node 1, core 4
|
|
* AP 0cstarted
|
|
get_boot_apic_id: using 13 as APIC ID for node 1, core 5
|
|
* AP 0dstarted
|
|
get_boot_apic_id: using 14 as APIC ID for node 1, core 6
|
|
* AP 0estarted
|
|
get_boot_apic_id: using 15 as APIC ID for node 1, core 7
|
|
* AP 0fstarted
|
|
get_boot_apic_id: using 33 as APIC ID for node 2, core 1
|
|
* AP 21started
|
|
get_boot_apic_id: using 34 as APIC ID for node 2, core 2
|
|
* AP 22started
|
|
get_boot_apic_id: using 35 as APIC ID for node 2, core 3
|
|
* AP 23started
|
|
get_boot_apic_id: using 36 as APIC ID for node 2, core 4
|
|
* AP 24started
|
|
get_boot_apic_id: using 37 as APIC ID for node 2, core 5
|
|
* AP 25started
|
|
get_boot_apic_id: using 38 as APIC ID for node 2, core 6
|
|
* AP 26started
|
|
get_boot_apic_id: using 39 as APIC ID for node 2, core 7
|
|
* AP 27started
|
|
get_boot_apic_id: using 41 as APIC ID for node 3, core 1
|
|
* AP 29started
|
|
get_boot_apic_id: using 42 as APIC ID for node 3, core 2
|
|
* AP 2astarted
|
|
get_boot_apic_id: using 43 as APIC ID for node 3, core 3
|
|
* AP 2bstarted
|
|
get_boot_apic_id: using 44 as APIC ID for node 3, core 4
|
|
* AP 2cstarted
|
|
get_boot_apic_id: using 45 as APIC ID for node 3, core 5
|
|
* AP 2dstarted
|
|
get_boot_apic_id: using 46 as APIC ID for node 3, core 6
|
|
* AP 2estarted
|
|
get_boot_apic_id: using 47 as APIC ID for node 3, core 7
|
|
* AP 2fstarted
|
|
|
|
|
|
Begin FIDVID MSR 0xc0010071 0x52c2009e 0x3a025208
|
|
End FIDVIDMSR 0xc0010071 0x52c2009e 0x3a025208
|
|
sr5650_htinit: Node 0 Link 1, HT freq=e.
|
|
sr5650_htinit: HT3 mode
|
|
...WARM RESET...
|
|
|
|
|
|
soft_reset() called!
|
|
|
|
|
|
coreboot-gnuboot-0.1-rc3 Wed Mar 13 13:44:58 UTC 2024 romstage starting (log level: 7)...
|
|
CPU APICID 00 start flag set
|
|
BSP Family_Model: 00600f12
|
|
*sysinfo range: [000c2f60,000cd4cc]
|
|
bsp_apicid = 00
|
|
cpu_init_detectedx = 00000000
|
|
sb700 reset flags: 0004
|
|
ERROR: FMAP cache corrupted?!
|
|
FMAP: Found "FLASH" version 1.1 at 0x0.
|
|
FMAP: base = 0xffe00000 size = 0x200000 #areas = 3
|
|
FMAP: area COREBOOT found @ 200 (2096640 bytes)
|
|
CBFS: 'COREBOOT Locator' located CBFS at [200:200000)
|
|
CBFS: Locating 'microcode_amd.bin'
|
|
CBFS: 'microcode_amd.bin' not found.
|
|
[microcode] microcode file not found. Skipping updates.
|
|
cpuSetAMDMSR done
|
|
Enter amd_ht_init
|
|
AMD_CB_EventNotify: INFO: HT_EVENT_COH_NODE_DISCOVERED: node 0 link 2 new node: 1
|
|
AMD_CB_EventNotify: INFO: HT_EVENT_COH_NODE_DISCOVERED: node 0 link 0 new node: 2
|
|
AMD_CB_EventNotify: INFO: HT_EVENT_COH_NODE_DISCOVERED: node 0 link 3 new node: 3
|
|
Forcing HT links to isochronous mode due to enabled IOMMU
|
|
Exit amd_ht_init
|
|
amd_ht_fixup
|
|
amd_ht_fixup: node 0 (internal node ID 0): disabling defective HT link (L3 connected: 1)
|
|
amd_ht_fixup: node 1 (internal node ID 1): disabling defective HT link (L3 connected: 1)
|
|
amd_ht_fixup: node 2 (internal node ID 0): disabling defective HT link (L3 connected: 1)
|
|
amd_ht_fixup: node 3 (internal node ID 1): disabling defective HT link (L3 connected: 1)
|
|
cpuSetAMDPCI 00 done
|
|
cpuSetAMDPCI 01 done
|
|
cpuSetAMDPCI 02 done
|
|
cpuSetAMDPCI 03 done
|
|
Prep FID/VID Node:00
|
|
F3x80: e20be281
|
|
F3x84: 01e200e2
|
|
F3xD4: c3312f18
|
|
F3xD8: 03000016
|
|
F3xDC: 05475632
|
|
Prep FID/VID Node:01
|
|
F3x80: e20be281
|
|
F3x84: 01e200e2
|
|
F3xD4: c3312f18
|
|
F3xD8: 03000016
|
|
F3xDC: 05475632
|
|
Prep FID/VID Node:02
|
|
F3x80: e20be281
|
|
F3x84: 01e200e2
|
|
F3xD4: c3312f18
|
|
F3xD8: 03000016
|
|
F3xDC: 05475632
|
|
Prep FID/VID Node:03
|
|
F3x80: e20be281
|
|
F3x84: 01e200e2
|
|
F3xD4: c3312f18
|
|
F3xD8: 03000016
|
|
F3xDC: 05475632
|
|
setup_remote_node: 01 done
|
|
Start node 01 done.
|
|
setup_remote_node: 02 done
|
|
Start node 02 done.
|
|
setup_remote_node: 03 done
|
|
Start node 03 done.
|
|
core0 started: 01 02 03
|
|
sr5650_early_setup()
|
|
get_cpu_rev EAX=0x600f12.
|
|
CPU Rev is Fam 15.
|
|
NB Revision is A12.
|
|
fam10_optimization()
|
|
sr5650_por_init
|
|
Enabling IOMMU
|
|
sb700_early_setup()
|
|
sb700_devices_por_init()
|
|
sb700_devices_por_init(): SMBus Device, BDF:0-20-0
|
|
SMBus controller enabled, sb revision is A15
|
|
sb700_devices_por_init: Disabling ISA DMA support
|
|
sb700_devices_por_init(): IDE Device, BDF:0-20-1
|
|
sb700_devices_por_init(): LPC Device, BDF:0-20-3
|
|
sb700_devices_por_init(): P2P Bridge, BDF:0-20-4
|
|
sb700_devices_por_init(): SATA Device, BDF:0-17-0
|
|
sb700_pmio_por_init()
|
|
start_other_cores()
|
|
NOTICE: read_option() used to access CMOS from non-ROMCC code, please use get_option() instead.
|
|
init node: 00 cores: 07 pass 1
|
|
Start other core - nodeid: 00 cores: 07
|
|
get_boot_apic_id: using 2 as APIC ID for node 0, core 2
|
|
get_boot_apic_id: using 4 as APIC ID for node 0, core 4
|
|
get_boot_apic_id: using 6 as APIC ID for node 0, core 6
|
|
init node: 01 cores: 07 pass 1
|
|
Start other core - nodeid: 01 cores: 07
|
|
get_boot_apic_id: using 10 as APIC ID for node 1, core 2
|
|
get_boot_apic_id: using 12 as APIC ID for node 1, core 4
|
|
get_boot_apic_id: using 14 as APIC ID for node 1, core 6
|
|
init node: 02 cores: 07 pass 1
|
|
Start other core - nodeid: 02 cores: 07
|
|
get_boot_apic_id: using 34 as APIC ID for node 2, core 2
|
|
get_boot_apic_id: using 36 as APIC ID for node 2, core 4
|
|
get_boot_apic_id: using 38 as APIC ID for node 2, core 6
|
|
init node: 03 cores: 07 pass 1
|
|
Start other core - nodeid: 03 cores: 07
|
|
get_boot_apic_id: using 42 as APIC ID for node 3, core 2
|
|
get_boot_apic_id: using 44 as APIC ID for node 3, core 4
|
|
get_boot_apic_id: using 46 as APIC ID for node 3, core 6
|
|
started ap apicid: NOTICE: read_option() used to access CMOS from non-ROMCC code, please use get_option() instead.
|
|
get_boot_apic_id: using 1 as APIC ID for node 0, core 1
|
|
* AP 01started
|
|
get_boot_apic_id: using 2 as APIC ID for node 0, core 2
|
|
* AP 02started
|
|
get_boot_apic_id: using 3 as APIC ID for node 0, core 3
|
|
* AP 03started
|
|
get_boot_apic_id: using 4 as APIC ID for node 0, core 4
|
|
* AP 04started
|
|
get_boot_apic_id: using 5 as APIC ID for node 0, core 5
|
|
* AP 05started
|
|
get_boot_apic_id: using 6 as APIC ID for node 0, core 6
|
|
* AP 06started
|
|
get_boot_apic_id: using 7 as APIC ID for node 0, core 7
|
|
* AP 07started
|
|
get_boot_apic_id: using 9 as APIC ID for node 1, core 1
|
|
* AP 09started
|
|
get_boot_apic_id: using 10 as APIC ID for node 1, core 2
|
|
* AP 0astarted
|
|
get_boot_apic_id: using 11 as APIC ID for node 1, core 3
|
|
* AP 0bstarted
|
|
get_boot_apic_id: using 12 as APIC ID for node 1, core 4
|
|
* AP 0cstarted
|
|
get_boot_apic_id: using 13 as APIC ID for node 1, core 5
|
|
* AP 0dstarted
|
|
get_boot_apic_id: using 14 as APIC ID for node 1, core 6
|
|
* AP 0estarted
|
|
get_boot_apic_id: using 15 as APIC ID for node 1, core 7
|
|
* AP 0fstarted
|
|
get_boot_apic_id: using 33 as APIC ID for node 2, core 1
|
|
* AP 21started
|
|
get_boot_apic_id: using 34 as APIC ID for node 2, core 2
|
|
* AP 22started
|
|
get_boot_apic_id: using 35 as APIC ID for node 2, core 3
|
|
* AP 23started
|
|
get_boot_apic_id: using 36 as APIC ID for node 2, core 4
|
|
* AP 24started
|
|
get_boot_apic_id: using 37 as APIC ID for node 2, core 5
|
|
* AP 25started
|
|
get_boot_apic_id: using 38 as APIC ID for node 2, core 6
|
|
* AP 26started
|
|
get_boot_apic_id: using 39 as APIC ID for node 2, core 7
|
|
* AP 27started
|
|
get_boot_apic_id: using 41 as APIC ID for node 3, core 1
|
|
* AP 29started
|
|
get_boot_apic_id: using 42 as APIC ID for node 3, core 2
|
|
* AP 2astarted
|
|
get_boot_apic_id: using 43 as APIC ID for node 3, core 3
|
|
* AP 2bstarted
|
|
get_boot_apic_id: using 44 as APIC ID for node 3, core 4
|
|
* AP 2cstarted
|
|
get_boot_apic_id: using 45 as APIC ID for node 3, core 5
|
|
* AP 2dstarted
|
|
get_boot_apic_id: using 46 as APIC ID for node 3, core 6
|
|
* AP 2estarted
|
|
get_boot_apic_id: using 47 as APIC ID for node 3, core 7
|
|
* AP 2fstarted
|
|
|
|
|
|
Begin FIDVID MSR 0xc0010071 0x52c2009e 0x3a025208
|
|
End FIDVIDMSR 0xc0010071 0x52c2009e 0x3a025208
|
|
sr5650_htinit: Node 0 Link 1, HT freq=e.
|
|
sr5650_htinit: HT3 mode
|
|
Node 00 DIMM voltage set to index 00
|
|
Node 01 DIMM voltage set to index 00
|
|
stopped ap apicid: NOTICE: read_option() used to access CMOS from non-ROMCC code, please use get_option() instead.
|
|
get_boot_apic_id: using 1 as APIC ID for node 0, core 1
|
|
* AP 01stopped
|
|
get_boot_apic_id: using 2 as APIC ID for node 0, core 2
|
|
* AP 02stopped
|
|
get_boot_apic_id: using 3 as APIC ID for node 0, core 3
|
|
* AP 03stopped
|
|
get_boot_apic_id: using 4 as APIC ID for node 0, core 4
|
|
* AP 04stopped
|
|
get_boot_apic_id: using 5 as APIC ID for node 0, core 5
|
|
* AP 05stopped
|
|
get_boot_apic_id: using 6 as APIC ID for node 0, core 6
|
|
* AP 06stopped
|
|
get_boot_apic_id: using 7 as APIC ID for node 0, core 7
|
|
* AP 07stopped
|
|
get_boot_apic_id: using 9 as APIC ID for node 1, core 1
|
|
* AP 09stopped
|
|
get_boot_apic_id: using 10 as APIC ID for node 1, core 2
|
|
* AP 0astopped
|
|
get_boot_apic_id: using 11 as APIC ID for node 1, core 3
|
|
* AP 0bstopped
|
|
get_boot_apic_id: using 12 as APIC ID for node 1, core 4
|
|
* AP 0cstopped
|
|
get_boot_apic_id: using 13 as APIC ID for node 1, core 5
|
|
* AP 0dstopped
|
|
get_boot_apic_id: using 14 as APIC ID for node 1, core 6
|
|
* AP 0estopped
|
|
get_boot_apic_id: using 15 as APIC ID for node 1, core 7
|
|
* AP 0fstopped
|
|
get_boot_apic_id: using 33 as APIC ID for node 2, core 1
|
|
* AP 21stopped
|
|
get_boot_apic_id: using 34 as APIC ID for node 2, core 2
|
|
* AP 22stopped
|
|
get_boot_apic_id: using 35 as APIC ID for node 2, core 3
|
|
* AP 23stopped
|
|
get_boot_apic_id: using 36 as APIC ID for node 2, core 4
|
|
* AP 24stopped
|
|
get_boot_apic_id: using 37 as APIC ID for node 2, core 5
|
|
* AP 25stopped
|
|
get_boot_apic_id: using 38 as APIC ID for node 2, core 6
|
|
* AP 26stopped
|
|
get_boot_apic_id: using 39 as APIC ID for node 2, core 7
|
|
* AP 27stopped
|
|
get_boot_apic_id: using 41 as APIC ID for node 3, core 1
|
|
* AP 29stopped
|
|
get_boot_apic_id: using 42 as APIC ID for node 3, core 2
|
|
* AP 2astopped
|
|
get_boot_apic_id: using 43 as APIC ID for node 3, core 3
|
|
* AP 2bstopped
|
|
get_boot_apic_id: using 44 as APIC ID for node 3, core 4
|
|
* AP 2cstopped
|
|
get_boot_apic_id: using 45 as APIC ID for node 3, core 5
|
|
* AP 2dstopped
|
|
get_boot_apic_id: using 46 as APIC ID for node 3, core 6
|
|
* AP 2estopped
|
|
get_boot_apic_id: using 47 as APIC ID for node 3, core 7
|
|
* AP 2fstopped
|
|
|
|
fill_mem_ctrl() detected 4 nodes
|
|
raminit_amdmct begin:
|
|
mctAutoInitMCT_D: mct_init Node 0
|
|
mctAutoInitMCT_D: mct_InitialMCT_D
|
|
mct_InitialMCT_D: mct_ForceNBPState0_En_Fam15
|
|
mctAutoInitMCT_D: mctSMBhub_Init
|
|
activate_spd_rom() for node 00
|
|
enable_spd_node0()
|
|
mctAutoInitMCT_D: mct_preInitDCT
|
|
DIMMPresence: DIMMValid=0
|
|
DIMMPresence: DIMMPresent=0
|
|
DIMMPresence: RegDIMMPresent=0
|
|
DIMMPresence: LRDIMMPresent=0
|
|
DIMMPresence: DimmECCPresent=0
|
|
DIMMPresence: DimmPARPresent=0
|
|
DIMMPresence: Dimmx4Present=0
|
|
DIMMPresence: Dimmx8Present=0
|
|
DIMMPresence: Dimmx16Present=0
|
|
DIMMPresence: DimmPlPresent=0
|
|
DIMMPresence: DimmDRPresent=0
|
|
DIMMPresence: DimmQRPresent=0
|
|
DIMMPresence: DATAload[0]=0
|
|
DIMMPresence: MAload[0]=0
|
|
DIMMPresence: MAdimms[0]=0
|
|
DIMMPresence: DATAload[1]=0
|
|
DIMMPresence: MAload[1]=0
|
|
DIMMPresence: MAdimms[1]=0
|
|
DIMMPresence: Status 2000
|
|
DIMMPresence: ErrStatus 1
|
|
DIMMPresence: ErrCode 2
|
|
DIMMPresence: Done
|
|
|
|
mctAutoInitMCT_D: mct_init Node 1
|
|
mctAutoInitMCT_D: mct_InitialMCT_D
|
|
mct_InitialMCT_D: mct_ForceNBPState0_En_Fam15
|
|
mctAutoInitMCT_D: mctSMBhub_Init
|
|
activate_spd_rom() for node 01
|
|
enable_spd_node1()
|
|
mctAutoInitMCT_D: mct_preInitDCT
|
|
DIMMPresence: DIMMValid=0
|
|
DIMMPresence: DIMMPresent=0
|
|
DIMMPresence: RegDIMMPresent=0
|
|
DIMMPresence: LRDIMMPresent=0
|
|
DIMMPresence: DimmECCPresent=0
|
|
DIMMPresence: DimmPARPresent=0
|
|
DIMMPresence: Dimmx4Present=0
|
|
DIMMPresence: Dimmx8Present=0
|
|
DIMMPresence: Dimmx16Present=0
|
|
DIMMPresence: DimmPlPresent=0
|
|
DIMMPresence: DimmDRPresent=0
|
|
DIMMPresence: DimmQRPresent=0
|
|
DIMMPresence: DATAload[0]=0
|
|
DIMMPresence: MAload[0]=0
|
|
DIMMPresence: MAdimms[0]=0
|
|
DIMMPresence: DATAload[1]=0
|
|
DIMMPresence: MAload[1]=0
|
|
DIMMPresence: MAdimms[1]=0
|
|
DIMMPresence: Status 2000
|
|
DIMMPresence: ErrStatus 1
|
|
DIMMPresence: ErrCode 2
|
|
DIMMPresence: Done
|
|
|
|
mctAutoInitMCT_D: mct_init Node 2
|
|
mctAutoInitMCT_D: mct_InitialMCT_D
|
|
mct_InitialMCT_D: mct_ForceNBPState0_En_Fam15
|
|
mctAutoInitMCT_D: mctSMBhub_Init
|
|
activate_spd_rom() for node 02
|
|
enable_spd_node2()
|
|
mctAutoInitMCT_D: mct_preInitDCT
|
|
DIMMPresence: DIMMValid=4
|
|
DIMMPresence: DIMMPresent=4
|
|
DIMMPresence: RegDIMMPresent=4
|
|
DIMMPresence: LRDIMMPresent=0
|
|
DIMMPresence: DimmECCPresent=4
|
|
DIMMPresence: DimmPARPresent=0
|
|
DIMMPresence: Dimmx4Present=4
|
|
DIMMPresence: Dimmx8Present=0
|
|
DIMMPresence: Dimmx16Present=0
|
|
DIMMPresence: DimmPlPresent=0
|
|
DIMMPresence: DimmDRPresent=4
|
|
DIMMPresence: DimmQRPresent=0
|
|
DIMMPresence: DATAload[0]=2
|
|
DIMMPresence: MAload[0]=20
|
|
DIMMPresence: MAdimms[0]=1
|
|
DIMMPresence: DATAload[1]=0
|
|
DIMMPresence: MAload[1]=0
|
|
DIMMPresence: MAdimms[1]=0
|
|
DIMMPresence: Status 2005
|
|
DIMMPresence: ErrStatus 0
|
|
DIMMPresence: ErrCode 0
|
|
DIMMPresence: Done
|
|
|
|
DCTPreInit_D: mct_DIMMPresence Done
|
|
mctAutoInitMCT_D: mct_init Node 3
|
|
mctAutoInitMCT_D: mct_InitialMCT_D
|
|
mct_InitialMCT_D: mct_ForceNBPState0_En_Fam15
|
|
mctAutoInitMCT_D: mctSMBhub_Init
|
|
activate_spd_rom() for node 03
|
|
enable_spd_node3()
|
|
mctAutoInitMCT_D: mct_preInitDCT
|
|
DIMMPresence: DIMMValid=0
|
|
DIMMPresence: DIMMPresent=0
|
|
DIMMPresence: RegDIMMPresent=0
|
|
DIMMPresence: LRDIMMPresent=0
|
|
DIMMPresence: DimmECCPresent=0
|
|
DIMMPresence: DimmPARPresent=0
|
|
DIMMPresence: Dimmx4Present=0
|
|
DIMMPresence: Dimmx8Present=0
|
|
DIMMPresence: Dimmx16Present=0
|
|
DIMMPresence: DimmPlPresent=0
|
|
DIMMPresence: DimmDRPresent=0
|
|
DIMMPresence: DimmQRPresent=0
|
|
DIMMPresence: DATAload[0]=0
|
|
DIMMPresence: MAload[0]=0
|
|
DIMMPresence: MAdimms[0]=0
|
|
DIMMPresence: DATAload[1]=0
|
|
DIMMPresence: MAload[1]=0
|
|
DIMMPresence: MAdimms[1]=0
|
|
DIMMPresence: Status 2000
|
|
DIMMPresence: ErrStatus 1
|
|
DIMMPresence: ErrCode 2
|
|
DIMMPresence: Done
|
|
|
|
mctAutoInitMCT_D: mct_init Node 4
|
|
mctAutoInitMCT_D: mct_init Node 5
|
|
mctAutoInitMCT_D: mct_init Node 6
|
|
mctAutoInitMCT_D: mct_init Node 7
|
|
mctAutoInitMCT_D: DIMMSetVoltage
|
|
Node 00 DIMM voltage set to index 03
|
|
Node 01 DIMM voltage set to index 00
|
|
mctAutoInitMCT_D: mctSMBhub_Init
|
|
activate_spd_rom() for node 00
|
|
enable_spd_node0()
|
|
mctAutoInitMCT_D: mct_initDCT
|
|
SPDCalcWidth: Status 2000
|
|
SPDCalcWidth: ErrStatus 1
|
|
SPDCalcWidth: ErrCode 2
|
|
SPDCalcWidth: Done
|
|
mctAutoInitMCT_D: mctSMBhub_Init
|
|
activate_spd_rom() for node 01
|
|
enable_spd_node1()
|
|
mctAutoInitMCT_D: mct_initDCT
|
|
SPDCalcWidth: Status 2000
|
|
SPDCalcWidth: ErrStatus 1
|
|
SPDCalcWidth: ErrCode 2
|
|
SPDCalcWidth: Done
|
|
mctAutoInitMCT_D: mctSMBhub_Init
|
|
activate_spd_rom() for node 02
|
|
enable_spd_node2()
|
|
mctAutoInitMCT_D: mct_initDCT
|
|
SPDCalcWidth: Status 2005
|
|
SPDCalcWidth: ErrStatus 0
|
|
SPDCalcWidth: ErrCode 0
|
|
SPDCalcWidth: Done
|
|
DCTInit_D: mct_SPDCalcWidth Done
|
|
AutoCycTiming_D: Start
|
|
mctGet_MaxLoadFreq: Channel 1: 1 DIMM(s) detected
|
|
mctGet_MaxLoadFreq: Channel 2: 0 DIMM(s) detected
|
|
GetPresetmaxF_D: Start
|
|
GetPresetmaxF_D: Done
|
|
SPDGetTCL_D: Start
|
|
SPDGetTCL_D: DIMMCASL 6
|
|
SPDGetTCL_D: DIMMAutoSpeed 4
|
|
SPDGetTCL_D: Status 2005
|
|
SPDGetTCL_D: ErrStatus 0
|
|
SPDGetTCL_D: ErrCode 0
|
|
SPDGetTCL_D: Done
|
|
|
|
SPD2ndTiming: Start
|
|
SPD2ndTiming: Done
|
|
AutoCycTiming: Status 2005
|
|
AutoCycTiming: ErrStatus 0
|
|
AutoCycTiming: ErrCode 0
|
|
AutoCycTiming: Done
|
|
|
|
DCTInit_D: AutoCycTiming_D Done
|
|
SPDSetBanks: CSPresent c
|
|
SPDSetBanks: Status 2005
|
|
SPDSetBanks: ErrStatus 0
|
|
SPDSetBanks: ErrCode 0
|
|
SPDSetBanks: Done
|
|
|
|
AfterStitch pDCTstat->NodeSysBase = 0
|
|
mct_AfterStitchMemory: pDCTstat->NodeSysLimit = 3ffffff
|
|
StitchMemory: Status 2005
|
|
StitchMemory: ErrStatus 0
|
|
StitchMemory: ErrCode 0
|
|
StitchMemory: Done
|
|
|
|
InterleaveBanks_D: Status 2005
|
|
InterleaveBanks_D: ErrStatus 0
|
|
InterleaveBanks_D: ErrCode 0
|
|
InterleaveBanks_D: Done
|
|
|
|
AutoConfig_D: DramControl: 00002a06
|
|
AutoConfig_D: DramTimingLo: 00000000
|
|
AutoConfig_D: DramConfigMisc: 00000000
|
|
AutoConfig_D: DramConfigMisc2: 00000000
|
|
AutoConfig_D: DramConfigLo: 03082000
|
|
AutoConfig_D: DramConfigHi: 0f090084
|
|
InitDDRPhy: Start
|
|
InitDDRPhy: Done
|
|
mct_SetDramConfigHi_D: Start
|
|
set_2t_configuration: Start
|
|
set_2t_configuration: Done
|
|
mct_BeforePlatformSpec: Start
|
|
mct_BeforePlatformSpec: Done
|
|
mct_PlatformSpec: Start
|
|
mct_PlatformSpec: Done
|
|
mct_SetDramConfigHi_D: DramConfigHi: 0f090084
|
|
*
|
|
mct_SetDramConfigHi_D: Done
|
|
mct_EarlyArbEn_D: Start
|
|
mct_EarlyArbEn_D: Done
|
|
AutoConfig: Status 2005
|
|
AutoConfig: ErrStatus 0
|
|
AutoConfig: ErrCode 0
|
|
AutoConfig: Done
|
|
|
|
DCTInit_D: AutoConfig_D Done
|
|
DCTInit_D: PlatformSpec_D Done
|
|
DCTFinalInit_D: StartupDCT_D Start
|
|
mct_BeforeDramInit_Prod_D: Start
|
|
mct_ProgramODT_D: Start
|
|
mct_ProgramODT_D: Done
|
|
mct_BeforeDramInit_Prod_D: Done
|
|
mct_DramInit_Sw_D: Start
|
|
mct_DCTAccessDone: Start
|
|
mct_DCTAccessDone: Done
|
|
DIMM 1 RttWr: 0
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 2
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttWr: 0
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 2
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_SendZQCmd: Start
|
|
mct_SendZQCmd: Done
|
|
mct_SendZQCmd: Start
|
|
mct_SendZQCmd: Done
|
|
mct_DCTAccessDone: Start
|
|
mct_DCTAccessDone: Done
|
|
mct_DramInit_Sw_D: Done
|
|
DCTFinalInit_D: StartupDCT_D Done
|
|
mctAutoInitMCT_D: mctSMBhub_Init
|
|
activate_spd_rom() for node 03
|
|
enable_spd_node3()
|
|
mctAutoInitMCT_D: mct_initDCT
|
|
SPDCalcWidth: Status 2000
|
|
SPDCalcWidth: ErrStatus 1
|
|
SPDCalcWidth: ErrCode 2
|
|
SPDCalcWidth: Done
|
|
mctAutoInitMCT_D: SyncDCTsReady_D
|
|
mctAutoInitMCT_D: HTMemMapInit_D
|
|
Node: 00 base: 00 limit: 00
|
|
Node: 01 base: 00 limit: 00
|
|
Node: 02 base: 00 limit: 3ffffff BottomIO: c00000
|
|
Node: 02 base: 03 limit: 43fffff
|
|
Node: 03 base: 00 limit: 00
|
|
Node: 04 base: 00 limit: 00
|
|
Node: 05 base: 00 limit: 00
|
|
Node: 06 base: 00 limit: 00
|
|
Node: 07 base: 00 limit: 00
|
|
Copy dram map from Node 0 to Node 01
|
|
Copy dram map from Node 0 to Node 02
|
|
Copy dram map from Node 0 to Node 03
|
|
mctAutoInitMCT_D: mctHookAfterCPU
|
|
mctAutoInitMCT_D: DQSTiming_D
|
|
phyAssistedMemFnceTraining: Start
|
|
phyAssistedMemFnceTraining: Done
|
|
InitPhyCompensation: DCT 0: Start
|
|
Waiting for predriver calibration to be applied...done!
|
|
InitPhyCompensation: DCT 0: Done
|
|
activate_spd_rom() for node 00
|
|
enable_spd_node0()
|
|
activate_spd_rom() for node 01
|
|
enable_spd_node1()
|
|
activate_spd_rom() for node 02
|
|
enable_spd_node2()
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttWr: 0
|
|
activate_spd_rom() for node 03
|
|
enable_spd_node3()
|
|
fam15_receiver_enable_training_seed: using seed: 0054
|
|
fam15_receiver_enable_training_seed: using seed: 0054
|
|
TrainRcvrEn: Status 2205
|
|
TrainRcvrEn: ErrStatus 0
|
|
TrainRcvrEn: ErrCode 0
|
|
TrainRcvrEn: Done
|
|
|
|
activate_spd_rom() for node 00
|
|
enable_spd_node0()
|
|
activate_spd_rom() for node 01
|
|
enable_spd_node1()
|
|
activate_spd_rom() for node 02
|
|
enable_spd_node2()
|
|
SetTargetFreq: Start
|
|
SetTargetFreq: Node 2: New frequency code: 0006
|
|
ChangeMemClk: Start
|
|
set_2t_configuration: Start
|
|
set_2t_configuration: Done
|
|
mct_BeforePlatformSpec: Start
|
|
mct_BeforePlatformSpec: Done
|
|
mct_PlatformSpec: Start
|
|
mct_PlatformSpec: Done
|
|
ChangeMemClk: Done
|
|
phyAssistedMemFnceTraining: Start
|
|
phyAssistedMemFnceTraining: Done
|
|
InitPhyCompensation: DCT 0: Start
|
|
Waiting for predriver calibration to be applied...done!
|
|
InitPhyCompensation: DCT 0: Done
|
|
SetTargetFreq: Done
|
|
SPD2ndTiming: Start
|
|
SPD2ndTiming: Done
|
|
mct_BeforeDramInit_Prod_D: Start
|
|
mct_ProgramODT_D: Start
|
|
mct_ProgramODT_D: Done
|
|
mct_BeforeDramInit_Prod_D: Done
|
|
mct_DramInit_Sw_D: Start
|
|
DIMM 1 RttWr: 0
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 2
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttWr: 0
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 2
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_DramInit_Sw_D: Done
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttWr: 0
|
|
SetTargetFreq: Start
|
|
SetTargetFreq: Node 2: New frequency code: 000a
|
|
ChangeMemClk: Start
|
|
set_2t_configuration: Start
|
|
set_2t_configuration: Done
|
|
mct_BeforePlatformSpec: Start
|
|
mct_BeforePlatformSpec: Done
|
|
mct_PlatformSpec: Start
|
|
mct_PlatformSpec: Done
|
|
ChangeMemClk: Done
|
|
phyAssistedMemFnceTraining: Start
|
|
phyAssistedMemFnceTraining: Done
|
|
InitPhyCompensation: DCT 0: Start
|
|
Waiting for predriver calibration to be applied...done!
|
|
InitPhyCompensation: DCT 0: Done
|
|
SetTargetFreq: Done
|
|
SPD2ndTiming: Start
|
|
SPD2ndTiming: Done
|
|
mct_BeforeDramInit_Prod_D: Start
|
|
mct_ProgramODT_D: Start
|
|
mct_ProgramODT_D: Done
|
|
mct_BeforeDramInit_Prod_D: Done
|
|
mct_DramInit_Sw_D: Start
|
|
DIMM 1 RttWr: 0
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 1
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttWr: 0
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 1
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_DramInit_Sw_D: Done
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttWr: 0
|
|
SetTargetFreq: Start
|
|
SetTargetFreq: Node 2: New frequency code: 000e
|
|
ChangeMemClk: Start
|
|
set_2t_configuration: Start
|
|
set_2t_configuration: Done
|
|
mct_BeforePlatformSpec: Start
|
|
mct_BeforePlatformSpec: Done
|
|
mct_PlatformSpec: Start
|
|
mct_PlatformSpec: Done
|
|
ChangeMemClk: Done
|
|
phyAssistedMemFnceTraining: Start
|
|
phyAssistedMemFnceTraining: Done
|
|
InitPhyCompensation: DCT 0: Start
|
|
Waiting for predriver calibration to be applied...done!
|
|
InitPhyCompensation: DCT 0: Done
|
|
SetTargetFreq: Done
|
|
SPD2ndTiming: Start
|
|
SPD2ndTiming: Done
|
|
mct_BeforeDramInit_Prod_D: Start
|
|
mct_ProgramODT_D: Start
|
|
mct_ProgramODT_D: Done
|
|
mct_BeforeDramInit_Prod_D: Done
|
|
mct_DramInit_Sw_D: Start
|
|
DIMM 1 RttWr: 2
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 1
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttWr: 2
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 1
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_DramInit_Sw_D: Done
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 2
|
|
DIMM 1 RttWr: 2
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 2
|
|
DIMM 1 RttWr: 2
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 2
|
|
DIMM 1 RttWr: 2
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 2
|
|
DIMM 1 RttWr: 2
|
|
SetTargetFreq: Start
|
|
SetTargetFreq: Node 2: New frequency code: 0012
|
|
ChangeMemClk: Start
|
|
set_2t_configuration: Start
|
|
set_2t_configuration: Done
|
|
mct_BeforePlatformSpec: Start
|
|
mct_BeforePlatformSpec: Done
|
|
mct_PlatformSpec: Start
|
|
mct_PlatformSpec: Done
|
|
ChangeMemClk: Done
|
|
phyAssistedMemFnceTraining: Start
|
|
phyAssistedMemFnceTraining: Done
|
|
InitPhyCompensation: DCT 0: Start
|
|
Waiting for predriver calibration to be applied...done!
|
|
InitPhyCompensation: DCT 0: Done
|
|
SetTargetFreq: Done
|
|
SPD2ndTiming: Start
|
|
SPD2ndTiming: Done
|
|
mct_BeforeDramInit_Prod_D: Start
|
|
mct_ProgramODT_D: Start
|
|
mct_ProgramODT_D: Done
|
|
mct_BeforeDramInit_Prod_D: Done
|
|
mct_DramInit_Sw_D: Start
|
|
DIMM 1 RttWr: 0
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 3
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttWr: 0
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 3
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_DramInit_Sw_D: Done
|
|
DIMM 1 RttNom: 3
|
|
DIMM 1 RttNom: 3
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 3
|
|
DIMM 1 RttNom: 3
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 3
|
|
DIMM 1 RttNom: 3
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 3
|
|
DIMM 1 RttNom: 3
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttWr: 0
|
|
activate_spd_rom() for node 03
|
|
enable_spd_node3()
|
|
fam15_receiver_enable_training_seed: using seed: 0054
|
|
fam15_receiver_enable_training_seed: using seed: 0054
|
|
TrainRcvrEn: Status 2205
|
|
TrainRcvrEn: ErrStatus 0
|
|
TrainRcvrEn: ErrCode 0
|
|
TrainRcvrEn: Done
|
|
|
|
TrainDQSReceiverEnCyc: Status 2205
|
|
TrainDQSReceiverEnCyc: TrainErrors 4000
|
|
TrainDQSReceiverEnCyc: ErrStatus 4000
|
|
TrainDQSReceiverEnCyc: ErrCode 0
|
|
TrainDQSReceiverEnCyc: Done
|
|
|
|
TrainMaxRdLatency: Status 2205
|
|
TrainMaxRdLatency: ErrStatus 4000
|
|
TrainMaxRdLatency: ErrCode 0
|
|
TrainMaxRdLatency: Done
|
|
|
|
mctAutoInitMCT_D: :OtherTiming
|
|
InterleaveNodes_D: Status 2000
|
|
InterleaveNodes_D: ErrStatus 1
|
|
InterleaveNodes_D: ErrCode 2
|
|
InterleaveNodes_D: Done
|
|
|
|
InterleaveChannels_D: Node 0
|
|
InterleaveChannels_D: Status 2000
|
|
InterleaveChannels_D: ErrStatus 1
|
|
InterleaveChannels_D: ErrCode 2
|
|
InterleaveChannels_D: Node 1
|
|
InterleaveChannels_D: Status 2000
|
|
InterleaveChannels_D: ErrStatus 1
|
|
InterleaveChannels_D: ErrCode 2
|
|
InterleaveChannels_D: Node 2
|
|
InterleaveChannels_D: Status 2205
|
|
InterleaveChannels_D: ErrStatus 4000
|
|
InterleaveChannels_D: ErrCode 0
|
|
InterleaveChannels_D: Node 3
|
|
InterleaveChannels_D: Status 2000
|
|
InterleaveChannels_D: ErrStatus 1
|
|
InterleaveChannels_D: ErrCode 2
|
|
InterleaveChannels_D: Node 4
|
|
InterleaveChannels_D: Status 2000
|
|
InterleaveChannels_D: ErrStatus 0
|
|
InterleaveChannels_D: ErrCode 0
|
|
InterleaveChannels_D: Node 5
|
|
InterleaveChannels_D: Status 2000
|
|
InterleaveChannels_D: ErrStatus 0
|
|
InterleaveChannels_D: ErrCode 0
|
|
InterleaveChannels_D: Node 6
|
|
InterleaveChannels_D: Status 2000
|
|
InterleaveChannels_D: ErrStatus 0
|
|
InterleaveChannels_D: ErrCode 0
|
|
InterleaveChannels_D: Node 7
|
|
InterleaveChannels_D: Status 2000
|
|
InterleaveChannels_D: ErrStatus 0
|
|
InterleaveChannels_D: ErrCode 0
|
|
InterleaveChannels_D: Done
|
|
|
|
mctAutoInitMCT_D: ECCInit_D
|
|
ECC enabled on node: 02
|
|
DCTMemClr_Sync_D: Start
|
|
DCTMemClr_Sync_D: Waiting for memory clear to complete..........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
|
|
.
|
|
DCTMemClr_Sync_D: Done
|
|
ECCInit: Node 00
|
|
ECCInit: Status 2000
|
|
ECCInit: ErrStatus 1
|
|
ECCInit: ErrCode 2
|
|
ECCInit: Done
|
|
ECCInit: Node 01
|
|
ECCInit: Status 2000
|
|
ECCInit: ErrStatus 1
|
|
ECCInit: ErrCode 2
|
|
ECCInit: Done
|
|
ECCInit: Node 02
|
|
ECCInit: Status 2205
|
|
ECCInit: ErrStatus 4000
|
|
ECCInit: ErrCode 0
|
|
ECCInit: Done
|
|
ECCInit: Node 03
|
|
ECCInit: Status 2000
|
|
ECCInit: ErrStatus 1
|
|
ECCInit: ErrCode 2
|
|
ECCInit: Done
|
|
mctAutoInitMCT_D: CPUMemTyping_D
|
|
CPUMemTyping: Cache32bTOP:c00000
|
|
CPUMemTyping: Bottom32bIO:c00000
|
|
CPUMemTyping: Bottom40bIO:4400000
|
|
mctAutoInitMCT_D: UMAMemTyping_D
|
|
mctAutoInitMCT_D: mct_ForceNBPState0_Dis_Fam15
|
|
mctAutoInitMCT_D Done: Global Status: 12
|
|
raminit_amdmct end:
|
|
CBMEM:
|
|
IMD: root @ bffff000 254 entries.
|
|
IMD: root @ bfffec00 62 entries.
|
|
amdmct_cbmem_store_info: Storing AMDMCT configuration in CBMEM
|
|
disable_spd()
|
|
FMAP: area COREBOOT found @ 200 (2096640 bytes)
|
|
CBFS: 'COREBOOT Locator' located CBFS at [200:200000)
|
|
CBFS: Locating 'fallback/ramstage'
|
|
CBFS: Found @ offset 28cc0 size 15bfa
|
|
|
|
|
|
coreboot-gnuboot-0.1-rc3 Wed Mar 13 13:44:58 UTC 2024 ramstage starting (log level: 7)...
|
|
Moving GDT to bfffe920...ok
|
|
BS: BS_PRE_DEVICE times (ms): entry 0 run 0 exit 0
|
|
BS: BS_DEV_INIT_CHIPS times (ms): entry 0 run 0 exit 0
|
|
Enumerating buses...
|
|
Mainboard KGPE-D16 Enable. dev=0x00e2d6e0
|
|
mainboard_enable, TOP MEM: msr.lo = 0xc0000000, msr.hi = 0x00000000
|
|
mainboard_enable, TOP MEM2: msr2.lo = 0x40000000, msr2.hi = 0x00000004
|
|
setup_bsp_ramtop, TOP MEM: msr.lo = 0xc0000000, msr.hi = 0x00000000
|
|
setup_bsp_ramtop, TOP MEM2: msr.lo = 0x40000000, msr.hi = 0x00000004
|
|
CPU_CLUSTER: 0 enabled
|
|
DOMAIN: 0000 enabled
|
|
PCI: 00:18.5 siblings=7
|
|
CPU: APIC: 00 enabled
|
|
CPU: APIC: 01 enabled
|
|
CPU: APIC: 02 enabled
|
|
CPU: APIC: 03 enabled
|
|
CPU: APIC: 04 enabled
|
|
CPU: APIC: 05 enabled
|
|
CPU: APIC: 06 enabled
|
|
CPU: APIC: 07 enabled
|
|
PCI: 00:19.5 siblings=7
|
|
CPU: APIC: 08 enabled
|
|
CPU: APIC: 09 enabled
|
|
CPU: APIC: 0a enabled
|
|
CPU: APIC: 0b enabled
|
|
CPU: APIC: 0c enabled
|
|
CPU: APIC: 0d enabled
|
|
CPU: APIC: 0e enabled
|
|
CPU: APIC: 0f enabled
|
|
PCI: 00:1a.5 siblings=7
|
|
CPU: APIC: 20 enabled
|
|
CPU: APIC: 21 enabled
|
|
CPU: APIC: 22 enabled
|
|
CPU: APIC: 23 enabled
|
|
CPU: APIC: 24 enabled
|
|
CPU: APIC: 25 enabled
|
|
CPU: APIC: 26 enabled
|
|
CPU: APIC: 27 enabled
|
|
PCI: 00:1b.5 siblings=7
|
|
CPU: APIC: 28 enabled
|
|
CPU: APIC: 29 enabled
|
|
CPU: APIC: 2a enabled
|
|
CPU: APIC: 2b enabled
|
|
CPU: APIC: 2c enabled
|
|
CPU: APIC: 2d enabled
|
|
CPU: APIC: 2e enabled
|
|
CPU: APIC: 2f enabled
|
|
scan_bus: scanning of bus CPU_CLUSTER: 0 took 53765 usecs
|
|
PCI: pci_scan_bus for bus 00
|
|
PCI: 00:18.0 [1022/1600] enabled
|
|
PCI: 00:18.1 [1022/1601] enabled
|
|
PCI: 00:18.2 [1022/1602] enabled
|
|
PCI: 00:18.3 [1022/1603] enabled
|
|
PCI: 00:18.4 [1022/1604] enabled
|
|
PCI: 00:18.5 [1022/1605] enabled
|
|
PCI: 00:19.0 [1022/1600] enabled
|
|
PCI: 00:19.1 [1022/1601] enabled
|
|
PCI: 00:19.2 [1022/1602] enabled
|
|
PCI: 00:19.3 [1022/1603] enabled
|
|
PCI: 00:19.4 [1022/1604] enabled
|
|
PCI: 00:19.5 [1022/1605] enabled
|
|
PCI: 00:1a.0 [1022/1600] enabled
|
|
PCI: 00:1a.1 [1022/1601] enabled
|
|
PCI: 00:1a.2 [1022/1602] enabled
|
|
PCI: 00:1a.3 [1022/1603] enabled
|
|
PCI: 00:1a.4 [1022/1604] enabled
|
|
PCI: 00:1a.5 [1022/1605] enabled
|
|
PCI: 00:1b.0 [1022/1600] enabled
|
|
PCI: 00:1b.1 [1022/1601] enabled
|
|
PCI: 00:1b.2 [1022/1602] enabled
|
|
PCI: 00:1b.3 [1022/1603] enabled
|
|
PCI: 00:1b.4 [1022/1604] enabled
|
|
PCI: 00:1b.5 [1022/1605] enabled
|
|
sr5650_enable: dev=00e2fe40, VID_DID=0x5a101002
|
|
Bus-0, Dev-0, Fun-0.
|
|
enable_pcie_bar3
|
|
sr5650_gpp_sb_init: nb_dev=0x00e2fe40, dev=0x00e2f8a0, port=0x8
|
|
PciePowerOffGppPorts() port 8
|
|
NB_PCI_REG04 = 2.
|
|
NB_PCI_REG84 = 3000010.
|
|
NB_PCI_REG4C = 52042.
|
|
Sysmem TOM = 0_c0000000
|
|
Sysmem TOM2 = 4_40000000
|
|
PCI: 00:00.0 [1002/5a10] enabled
|
|
PCI: 00:00.0 [1002/5a10] enabled next_unitid: 0015
|
|
PCI: pci_scan_bus for bus 00
|
|
sr5650_enable: dev=00e2fe40, VID_DID=0x5a101002
|
|
Bus-0, Dev-0, Fun-0.
|
|
enable_pcie_bar3
|
|
sr5650_gpp_sb_init: nb_dev=0x00e2fe40, dev=0x00e2f8a0, port=0x8
|
|
PciePowerOffGppPorts() port 8
|
|
NB_PCI_REG04 = 2.
|
|
NB_PCI_REG84 = 3000010.
|
|
NB_PCI_REG4C = 52042.
|
|
Sysmem TOM = 0_c0000000
|
|
Sysmem TOM2 = 4_40000000
|
|
PCI: 00:00.0 [1002/5a10] enabled
|
|
sr5650_enable: dev=00e2fda0, VID_DID=0xffffffff
|
|
Bus-0, Dev-0, Fun-1.
|
|
PCI: Static device PCI: 00:00.1 not found, disabling it.
|
|
sr5650_enable: dev=00e2fd00, VID_DID=0x5a231002
|
|
Bus-0, Dev-0, Fun-2.
|
|
PCI: 00:00.2 [1002/5a23] enabled
|
|
sr5650_enable: dev=00e2fc60, VID_DID=0xffffffff
|
|
Bus-0, Dev-2,3, Fun-0. enable=1
|
|
sr5650_gpp_sb_init: nb_dev=0x00e2fe40, dev=0x00e2fc60, port=0x2
|
|
PcieLinkTraining port=2:lc current state=2030400
|
|
sr5650_gpp_sb_init: port=0x2 hw_port=0x2 result=0
|
|
PciePowerOffGppPorts() port 2
|
|
PCI: 00:02.0 subordinate bus PCI Express
|
|
PCI: 00:02.0 [1002/5a16] enabled
|
|
sr5650_enable: dev=00e2fbc0, VID_DID=0xffffffff
|
|
Bus-0, Dev-2,3, Fun-0. enable=0
|
|
sr5650_enable: dev=00e2fb20, VID_DID=0xffffffff
|
|
enable_pcie_bar3
|
|
Bus-0, Dev-4,5,6,7, Fun-0. enable=1
|
|
sr5650_gpp_sb_init: nb_dev=0x00e2fe40, dev=0x00e2fb20, port=0x4
|
|
PcieLinkTraining port=4:lc current state=2030400
|
|
sr5650_gpp_sb_init: port=0x4 hw_port=0x4 result=0
|
|
PciePowerOffGppPorts() port 4
|
|
PCI: 00:04.0 subordinate bus PCI Express
|
|
PCI: 00:04.0 [1002/5a18] enabled
|
|
sr5650_enable: dev=00e2fa80, VID_DID=0xffffffff
|
|
enable_pcie_bar3
|
|
Bus-0, Dev-4,5,6,7, Fun-0. enable=0
|
|
sr5650_enable: dev=00e2f9e0, VID_DID=0xffffffff
|
|
enable_pcie_bar3
|
|
Bus-0, Dev-4,5,6,7, Fun-0. enable=0
|
|
sr5650_enable: dev=00e2f940, VID_DID=0xffffffff
|
|
enable_pcie_bar3
|
|
Bus-0, Dev-4,5,6,7, Fun-0. enable=0
|
|
sr5650_enable: dev=00e2f8a0, VID_DID=0xffffffff
|
|
Bus-0, Dev-8, Fun-0. enable=0
|
|
disable_pcie_bar3
|
|
sr5650_enable: dev=00e2f800, VID_DID=0xffffffff
|
|
Bus-0, Dev-9, 10, Fun-0. enable=1
|
|
enable_pcie_bar3
|
|
sr5650_gpp_sb_init: nb_dev=0x00e2fe40, dev=0x00e2f800, port=0x9
|
|
PcieLinkTraining port=5:lc current state=a0b0f10
|
|
addr=c0000000,bus=0,devfn=48
|
|
PcieTrainPort reg=0x10000
|
|
sr5650_gpp_sb_init: port=0x9 hw_port=0x5 result=1
|
|
PCI: 00:09.0 subordinate bus PCI Express
|
|
PCI: 00:09.0 [1002/5a1c] enabled
|
|
sr5650_enable: dev=00e2f760, VID_DID=0xffffffff
|
|
Bus-0, Dev-9, 10, Fun-0. enable=1
|
|
enable_pcie_bar3
|
|
sr5650_gpp_sb_init: nb_dev=0x00e2fe40, dev=0x00e2f760, port=0xa
|
|
PcieLinkTraining port=6:lc current state=a0b0f10
|
|
addr=c0000000,bus=0,devfn=50
|
|
PcieTrainPort reg=0x10000
|
|
sr5650_gpp_sb_init: port=0xa hw_port=0x6 result=1
|
|
PCI: 00:0a.0 subordinate bus PCI Express
|
|
PCI: 00:0a.0 [1002/5a1d] enabled
|
|
sr5650_enable: dev=00e2f6c0, VID_DID=0xffffffff
|
|
Bus-0, Dev-11,12, Fun-0. enable=1
|
|
sr5650_gpp_sb_init: nb_dev=0x00e2fe40, dev=0x00e2f6c0, port=0xb
|
|
PcieLinkTraining port=b:lc current state=2030400
|
|
sr5650_gpp_sb_init: port=0xb hw_port=0xb result=0
|
|
PciePowerOffGppPorts() port 11
|
|
PCI: 00:0b.0 subordinate bus PCI Express
|
|
PCI: 00:0b.0 [1002/5a1f] enabled
|
|
sr5650_enable: dev=00e2f620, VID_DID=0xffffffff
|
|
Bus-0, Dev-11,12, Fun-0. enable=1
|
|
sr5650_gpp_sb_init: nb_dev=0x00e2fe40, dev=0x00e2f620, port=0xc
|
|
PcieLinkTraining port=c:lc current state=2030400
|
|
sr5650_gpp_sb_init: port=0xc hw_port=0xc result=0
|
|
PciePowerOffGppPorts() port 12
|
|
PCI: 00:0c.0 subordinate bus PCI Express
|
|
PCI: 00:0c.0 [1002/5a20] enabled
|
|
sr5650_enable: dev=00e2f580, VID_DID=0xffffffff
|
|
sr5650_gpp_sb_init: nb_dev=0x00e2fe40, dev=0x00e2f580, port=0xd
|
|
PcieLinkTraining port=d:lc current state=2030400
|
|
sr5650_gpp_sb_init: port=0xd hw_port=0xd result=0
|
|
PciePowerOffGppPorts() port 13
|
|
PCI: 00:0d.0 subordinate bus PCI Express
|
|
PCI: 00:0d.0 [1002/5a1e] enabled
|
|
sb7xx_51xx_enable()
|
|
PCI: 00:11.0 [1002/4390] enabled
|
|
sb7xx_51xx_enable()
|
|
PCI: 00:12.0 [1002/4397] enabled
|
|
sb7xx_51xx_enable()
|
|
PCI: 00:12.1 [1002/4398] enabled
|
|
sb7xx_51xx_enable()
|
|
PCI: 00:12.2 [1002/4396] enabled
|
|
sb7xx_51xx_enable()
|
|
PCI: 00:13.0 [1002/4397] enabled
|
|
sb7xx_51xx_enable()
|
|
PCI: 00:13.1 [1002/4398] enabled
|
|
sb7xx_51xx_enable()
|
|
PCI: 00:13.2 [1002/4396] enabled
|
|
sb7xx_51xx_enable()
|
|
PCI: 00:14.0 [1002/4385] enabled
|
|
sb7xx_51xx_enable()
|
|
PCI: 00:14.1 [1002/439c] enabled
|
|
sb7xx_51xx_enable()
|
|
PCI: 00:14.2 [1002/4383] enabled
|
|
sb7xx_51xx_enable()
|
|
PCI: 00:14.3 [1002/439d] enabled
|
|
sb7xx_51xx_enable()
|
|
PCI: 00:14.4 [1002/4384] enabled
|
|
sb7xx_51xx_enable()
|
|
PCI: 00:14.5 [1002/4399] enabled
|
|
PCI: Leftover static devices:
|
|
PCI: 00:00.1
|
|
PCI: 00:03.0
|
|
PCI: 00:05.0
|
|
PCI: 00:06.0
|
|
PCI: 00:07.0
|
|
PCI: 00:08.0
|
|
PCI: Check your devicetree.cb.
|
|
PCI: pci_scan_bus for bus 01
|
|
scan_bus: scanning of bus PCI: 00:02.0 took 1938 usecs
|
|
PCI: pci_scan_bus for bus 02
|
|
scan_bus: scanning of bus PCI: 00:04.0 took 1924 usecs
|
|
PCI: pci_scan_bus for bus 03
|
|
PCI: 03:00.0 [8086/10d3] enabled
|
|
Enabling Common Clock Configuration
|
|
PCIE CLK PM is not supported by endpoint
|
|
ASPM: Enabled None
|
|
Failed to enable LTR for dev = PCI: 03:00.0
|
|
scan_bus: scanning of bus PCI: 00:09.0 took 13330 usecs
|
|
PCI: pci_scan_bus for bus 04
|
|
PCI: 04:00.0 [8086/10d3] enabled
|
|
Enabling Common Clock Configuration
|
|
PCIE CLK PM is not supported by endpoint
|
|
ASPM: Enabled None
|
|
Failed to enable LTR for dev = PCI: 04:00.0
|
|
scan_bus: scanning of bus PCI: 00:0a.0 took 13299 usecs
|
|
PCI: pci_scan_bus for bus 05
|
|
scan_bus: scanning of bus PCI: 00:0b.0 took 1924 usecs
|
|
PCI: pci_scan_bus for bus 06
|
|
scan_bus: scanning of bus PCI: 00:0c.0 took 1924 usecs
|
|
PCI: pci_scan_bus for bus 07
|
|
scan_bus: scanning of bus PCI: 00:0d.0 took 1924 usecs
|
|
bus: PCI: 00:14.0[0]->I2C: 01:50 enabled
|
|
bus: PCI: 00:14.0[0]->I2C: 01:51 enabled
|
|
bus: PCI: 00:14.0[0]->I2C: 01:52 enabled
|
|
bus: PCI: 00:14.0[0]->I2C: 01:53 enabled
|
|
bus: PCI: 00:14.0[0]->I2C: 01:54 enabled
|
|
bus: PCI: 00:14.0[0]->I2C: 01:55 enabled
|
|
bus: PCI: 00:14.0[0]->I2C: 01:56 enabled
|
|
bus: PCI: 00:14.0[0]->I2C: 01:57 enabled
|
|
bus: PCI: 00:14.0[0]->I2C: 01:2f enabled
|
|
scan_bus: scanning of bus PCI: 00:14.0 took 24052 usecs
|
|
PNP: 002e.0 disabled
|
|
PNP: 002e.1 disabled
|
|
PNP: 002e.2 enabled
|
|
PNP: 002e.3 enabled
|
|
PNP: 002e.5 enabled
|
|
PNP: 002e.106 disabled
|
|
PNP: 002e.107 disabled
|
|
PNP: 002e.207 disabled
|
|
PNP: 002e.307 disabled
|
|
PNP: 002e.407 disabled
|
|
PNP: 002e.8 disabled
|
|
PNP: 002e.108 disabled
|
|
PNP: 002e.9 disabled
|
|
PNP: 002e.109 disabled
|
|
PNP: 002e.209 disabled
|
|
PNP: 002e.309 disabled
|
|
PNP: 002e.a enabled
|
|
PNP: 002e.b enabled
|
|
PNP: 002e.c disabled
|
|
PNP: 002e.d disabled
|
|
PNP: 002e.f disabled
|
|
PNP: 004e.0 enabled
|
|
PNP: 0ca2.0 enabled
|
|
scan_bus: scanning of bus PCI: 00:14.3 took 33085 usecs
|
|
PCI: pci_scan_bus for bus 08
|
|
sb7xx_51xx_enable()
|
|
PCI: 08:01.0 [1a03/2000] enabled
|
|
sb7xx_51xx_enable()
|
|
PCI: 08:02.0 [11c1/5811] enabled
|
|
sb7xx_51xx_enable()
|
|
PCI: Static device PCI: 08:03.0 not found, disabling it.
|
|
PCI: Leftover static devices:
|
|
PCI: 08:03.0
|
|
PCI: Check your devicetree.cb.
|
|
scan_bus: scanning of bus PCI: 00:14.4 took 18822 usecs
|
|
scan_bus: scanning of bus PCI: 00:18.0 took 1399977 usecs
|
|
scan_bus: scanning of bus PCI: 00:19.0 took 1 usecs
|
|
scan_bus: scanning of bus PCI: 00:1a.0 took 1 usecs
|
|
scan_bus: scanning of bus PCI: 00:1b.0 took 1 usecs
|
|
scan_bus: scanning of bus DOMAIN: 0000 took 1467465 usecs
|
|
scan_bus: scanning of bus Root Device took 1540520 usecs
|
|
done
|
|
BS: BS_DEV_ENUMERATE times (ms): entry 0 run 1558 exit 0
|
|
found VGA at PCI: 08:01.0
|
|
Setting up VGA for PCI: 08:01.0
|
|
Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:14.4
|
|
Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:18.0
|
|
Setting PCI_BRIDGE_CTL_VGA for bridge DOMAIN: 0000
|
|
Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
|
|
Allocating resources...
|
|
Reading resources...
|
|
Adding PCIe enhanced config space BAR 0xc0000000-0xd0000000.
|
|
sr5690_read_resource: PCI: 00:00.0
|
|
I2C: 01:50 missing read_resources
|
|
I2C: 01:51 missing read_resources
|
|
I2C: 01:52 missing read_resources
|
|
I2C: 01:53 missing read_resources
|
|
I2C: 01:54 missing read_resources
|
|
I2C: 01:55 missing read_resources
|
|
I2C: 01:56 missing read_resources
|
|
I2C: 01:57 missing read_resources
|
|
Done reading resources.
|
|
Setting resources...
|
|
2: mmio_basek=00300000, basek=00400000, limitk=01100000
|
|
VGA: PCI: 00:18.0 (aka node 0) link 1 has VGA device
|
|
PCI: 00:18.0 111b8 <- [0x00000a0000 - 0x00000bffff] size 0x00020000 gran 0x00 mem <node 0 link 1>
|
|
PCI: 00:18.0 110b0 <- [0x00fcc00000 - 0x00fccfffff] size 0x00100000 gran 0x14 prefmem <node 0 link 1>
|
|
PCI: 00:18.0 110b8 <- [0x00fc000000 - 0x00fcbfffff] size 0x00c00000 gran 0x14 mem <node 0 link 1>
|
|
PCI: 00:18.0 110d8 <- [0x0000001000 - 0x0000004fff] size 0x00004000 gran 0x0c io <node 0 link 1>
|
|
PCI: 00:00.0 sr5690_set_resources
|
|
sr5690_set_resources: PCI: 00:00.0[0x1c] base = c0000000 limit = cfffffff
|
|
PCI: 00:00.0 c0010058 <- [0x00c0000000 - 0x00cfffffff] size 0x10000000 gran 0x00 mem <mmconfig>
|
|
sr5690_set_resources: PCI: 00:18.1 <- index a8 base c00003 limit cfff90
|
|
PCI: 00:00.0 fc <- [0x00fcc00000 - 0x00fcc000ff] size 0x00000100 gran 0x08 prefmem
|
|
PCI: 00:00.2 44 <- [0x00fcb00000 - 0x00fcb03fff] size 0x00004000 gran 0x0e mem
|
|
PCI: 00:02.0 1c <- [0x0000004fff - 0x0000004ffe] size 0x00000000 gran 0x0c bus 01 io
|
|
PCI: 00:02.0 24 <- [0x00fccfffff - 0x00fccffffe] size 0x00000000 gran 0x14 bus 01 prefmem
|
|
PCI: 00:02.0 20 <- [0x00fcbfffff - 0x00fcbffffe] size 0x00000000 gran 0x14 bus 01 mem
|
|
PCI: 00:04.0 1c <- [0x0000004fff - 0x0000004ffe] size 0x00000000 gran 0x0c bus 02 io
|
|
PCI: 00:04.0 24 <- [0x00fccfffff - 0x00fccffffe] size 0x00000000 gran 0x14 bus 02 prefmem
|
|
PCI: 00:04.0 20 <- [0x00fcbfffff - 0x00fcbffffe] size 0x00000000 gran 0x14 bus 02 mem
|
|
PCI: 00:09.0 1c <- [0x0000001000 - 0x0000001fff] size 0x00001000 gran 0x0c bus 03 io
|
|
PCI: 00:09.0 24 <- [0x00fccfffff - 0x00fccffffe] size 0x00000000 gran 0x14 bus 03 prefmem
|
|
PCI: 00:09.0 20 <- [0x00fc900000 - 0x00fc9fffff] size 0x00100000 gran 0x14 bus 03 mem
|
|
PCI: 03:00.0 10 <- [0x00fc900000 - 0x00fc91ffff] size 0x00020000 gran 0x11 mem
|
|
PCI: 03:00.0 18 <- [0x0000001000 - 0x000000101f] size 0x00000020 gran 0x05 io
|
|
PCI: 03:00.0 1c <- [0x00fc920000 - 0x00fc923fff] size 0x00004000 gran 0x0e mem
|
|
PCI: 00:0a.0 1c <- [0x0000002000 - 0x0000002fff] size 0x00001000 gran 0x0c bus 04 io
|
|
PCI: 00:0a.0 24 <- [0x00fccfffff - 0x00fccffffe] size 0x00000000 gran 0x14 bus 04 prefmem
|
|
PCI: 00:0a.0 20 <- [0x00fca00000 - 0x00fcafffff] size 0x00100000 gran 0x14 bus 04 mem
|
|
PCI: 04:00.0 10 <- [0x00fca00000 - 0x00fca1ffff] size 0x00020000 gran 0x11 mem
|
|
PCI: 04:00.0 18 <- [0x0000002000 - 0x000000201f] size 0x00000020 gran 0x05 io
|
|
PCI: 04:00.0 1c <- [0x00fca20000 - 0x00fca23fff] size 0x00004000 gran 0x0e mem
|
|
PCI: 00:0b.0 1c <- [0x0000004fff - 0x0000004ffe] size 0x00000000 gran 0x0c bus 05 io
|
|
PCI: 00:0b.0 24 <- [0x00fccfffff - 0x00fccffffe] size 0x00000000 gran 0x14 bus 05 prefmem
|
|
PCI: 00:0b.0 20 <- [0x00fcbfffff - 0x00fcbffffe] size 0x00000000 gran 0x14 bus 05 mem
|
|
PCI: 00:0c.0 1c <- [0x0000004fff - 0x0000004ffe] size 0x00000000 gran 0x0c bus 06 io
|
|
PCI: 00:0c.0 24 <- [0x00fccfffff - 0x00fccffffe] size 0x00000000 gran 0x14 bus 06 prefmem
|
|
PCI: 00:0c.0 20 <- [0x00fcbfffff - 0x00fcbffffe] size 0x00000000 gran 0x14 bus 06 mem
|
|
PCI: 00:0d.0 1c <- [0x0000004fff - 0x0000004ffe] size 0x00000000 gran 0x0c bus 07 io
|
|
PCI: 00:0d.0 24 <- [0x00fccfffff - 0x00fccffffe] size 0x00000000 gran 0x14 bus 07 prefmem
|
|
PCI: 00:0d.0 20 <- [0x00fcbfffff - 0x00fcbffffe] size 0x00000000 gran 0x14 bus 07 mem
|
|
PCI: 00:11.0 10 <- [0x0000004020 - 0x0000004027] size 0x00000008 gran 0x03 io
|
|
PCI: 00:11.0 14 <- [0x0000004040 - 0x0000004043] size 0x00000004 gran 0x02 io
|
|
PCI: 00:11.0 18 <- [0x0000004028 - 0x000000402f] size 0x00000008 gran 0x03 io
|
|
PCI: 00:11.0 1c <- [0x0000004044 - 0x0000004047] size 0x00000004 gran 0x02 io
|
|
PCI: 00:11.0 20 <- [0x0000004000 - 0x000000400f] size 0x00000010 gran 0x04 io
|
|
PCI: 00:11.0 24 <- [0x00fcb0d000 - 0x00fcb0d3ff] size 0x00000400 gran 0x0a mem
|
|
PCI: 00:12.0 10 <- [0x00fcb08000 - 0x00fcb08fff] size 0x00001000 gran 0x0c mem
|
|
PCI: 00:12.1 10 <- [0x00fcb09000 - 0x00fcb09fff] size 0x00001000 gran 0x0c mem
|
|
PCI: 00:12.2 10 <- [0x00fcb0e000 - 0x00fcb0e0ff] size 0x00000100 gran 0x08 mem
|
|
PCI: 00:13.0 10 <- [0x00fcb0a000 - 0x00fcb0afff] size 0x00001000 gran 0x0c mem
|
|
PCI: 00:13.1 10 <- [0x00fcb0b000 - 0x00fcb0bfff] size 0x00001000 gran 0x0c mem
|
|
PCI: 00:13.2 10 <- [0x00fcb0f000 - 0x00fcb0f0ff] size 0x00000100 gran 0x08 mem
|
|
PCI: 00:14.1 10 <- [0x0000004030 - 0x0000004037] size 0x00000008 gran 0x03 io
|
|
PCI: 00:14.1 14 <- [0x0000004048 - 0x000000404b] size 0x00000004 gran 0x02 io
|
|
PCI: 00:14.1 18 <- [0x0000004038 - 0x000000403f] size 0x00000008 gran 0x03 io
|
|
PCI: 00:14.1 1c <- [0x000000404c - 0x000000404f] size 0x00000004 gran 0x02 io
|
|
PCI: 00:14.1 20 <- [0x0000004010 - 0x000000401f] size 0x00000010 gran 0x04 io
|
|
PCI: 00:14.2 10 <- [0x00fcb04000 - 0x00fcb07fff] size 0x00004000 gran 0x0e mem64
|
|
PCI: 00:14.3 a0 <- [0x00fcb10000 - 0x00fcb10000] size 0x00000001 gran 0x00 mem
|
|
PNP: 002e.2 60 <- [0x00000003f8 - 0x00000003ff] size 0x00000008 gran 0x03 io
|
|
PNP: 002e.2 70 <- [0x0000000004 - 0x0000000004] size 0x00000001 gran 0x00 irq
|
|
PNP: 002e.3 60 <- [0x00000002f8 - 0x00000002ff] size 0x00000008 gran 0x03 io
|
|
PNP: 002e.3 70 <- [0x0000000003 - 0x0000000003] size 0x00000001 gran 0x00 irq
|
|
PNP: 002e.5 60 <- [0x0000000060 - 0x0000000060] size 0x00000001 gran 0x00 io
|
|
PNP: 002e.5 62 <- [0x0000000064 - 0x0000000064] size 0x00000001 gran 0x00 io
|
|
PNP: 002e.5 70 <- [0x0000000001 - 0x0000000001] size 0x00000001 gran 0x00 irq
|
|
PNP: 002e.5 72 <- [0x000000000c - 0x000000000c] size 0x00000001 gran 0x00 irq
|
|
PNP: 002e.b 60 <- [0x0000000290 - 0x0000000291] size 0x00000002 gran 0x01 io
|
|
ERROR: PNP: 002e.b 70 irq size: 0x0000000001 not assigned
|
|
PNP: 0ca2.0 00 <- [0x0000000ca2 - 0x0000000ca3] size 0x00000002 gran 0x00 io
|
|
PCI: 00:14.4 1c <- [0x0000003000 - 0x0000003fff] size 0x00001000 gran 0x0c bus 08 io
|
|
PCI: 00:14.4 24 <- [0x00fccfffff - 0x00fccffffe] size 0x00000000 gran 0x14 bus 08 prefmem
|
|
PCI: 00:14.4 20 <- [0x00fc000000 - 0x00fc8fffff] size 0x00900000 gran 0x14 bus 08 mem
|
|
PCI: 08:01.0 10 <- [0x00fc000000 - 0x00fc7fffff] size 0x00800000 gran 0x17 mem
|
|
PCI: 08:01.0 14 <- [0x00fc800000 - 0x00fc81ffff] size 0x00020000 gran 0x11 mem
|
|
PCI: 08:01.0 18 <- [0x0000003000 - 0x000000307f] size 0x00000080 gran 0x07 io
|
|
PCI: 08:02.0 10 <- [0x00fc820000 - 0x00fc820fff] size 0x00001000 gran 0x0c mem
|
|
PCI: 00:14.5 10 <- [0x00fcb0c000 - 0x00fcb0cfff] size 0x00001000 gran 0x0c mem
|
|
PCI: 00:18.3 94 <- [0x00f8000000 - 0x00fbffffff] size 0x04000000 gran 0x1a mem <gart>
|
|
PCI: 00:19.3 94 <- [0x00f8000000 - 0x00fbffffff] size 0x04000000 gran 0x1a mem <gart>
|
|
PCI: 00:1a.3 94 <- [0x00f8000000 - 0x00fbffffff] size 0x04000000 gran 0x1a mem <gart>
|
|
PCI: 00:1b.3 94 <- [0x00f8000000 - 0x00fbffffff] size 0x04000000 gran 0x1a mem <gart>
|
|
Done setting resources.
|
|
Done allocating resources.
|
|
BS: BS_DEV_RESOURCES times (ms): entry 0 run 471 exit 0
|
|
Enabling resources...
|
|
PCI: 00:18.0 cmd <- 00
|
|
PCI: 00:18.1 subsystem <- 1043/8163
|
|
PCI: 00:18.1 cmd <- 00
|
|
PCI: 00:18.2 subsystem <- 1043/8163
|
|
PCI: 00:18.2 cmd <- 00
|
|
PCI: 00:18.3 cmd <- 00
|
|
PCI: 00:18.4 cmd <- 00
|
|
PCI: 00:18.5 cmd <- 00
|
|
PCI: 00:19.0 cmd <- 00
|
|
PCI: 00:19.1 subsystem <- 1043/8163
|
|
PCI: 00:19.1 cmd <- 00
|
|
PCI: 00:19.2 subsystem <- 1043/8163
|
|
PCI: 00:19.2 cmd <- 00
|
|
PCI: 00:19.3 cmd <- 00
|
|
PCI: 00:19.4 cmd <- 00
|
|
PCI: 00:19.5 cmd <- 00
|
|
PCI: 00:1a.0 cmd <- 00
|
|
PCI: 00:1a.1 subsystem <- 1043/8163
|
|
PCI: 00:1a.1 cmd <- 00
|
|
PCI: 00:1a.2 subsystem <- 1043/8163
|
|
PCI: 00:1a.2 cmd <- 00
|
|
PCI: 00:1a.3 cmd <- 00
|
|
PCI: 00:1a.4 cmd <- 00
|
|
PCI: 00:1a.5 cmd <- 00
|
|
PCI: 00:1b.0 cmd <- 00
|
|
PCI: 00:1b.1 subsystem <- 1043/8163
|
|
PCI: 00:1b.1 cmd <- 00
|
|
PCI: 00:1b.2 subsystem <- 1043/8163
|
|
PCI: 00:1b.2 cmd <- 00
|
|
PCI: 00:1b.3 cmd <- 00
|
|
PCI: 00:1b.4 cmd <- 00
|
|
PCI: 00:1b.5 cmd <- 00
|
|
PCI: 00:00.0 subsystem <- 1043/8163
|
|
PCI: 00:00.0 cmd <- 02
|
|
Initializing IOMMU
|
|
PCI: 00:02.0 bridge ctrl <- 0013
|
|
PCI: 00:02.0 cmd <- 00
|
|
PCI: 00:04.0 bridge ctrl <- 0013
|
|
PCI: 00:04.0 cmd <- 00
|
|
PCI: 00:09.0 bridge ctrl <- 0013
|
|
PCI: 00:09.0 cmd <- 07
|
|
PCI: 00:0a.0 bridge ctrl <- 0013
|
|
PCI: 00:0a.0 cmd <- 07
|
|
PCI: 00:0b.0 bridge ctrl <- 0013
|
|
PCI: 00:0b.0 cmd <- 00
|
|
PCI: 00:0c.0 bridge ctrl <- 0013
|
|
PCI: 00:0c.0 cmd <- 00
|
|
PCI: 00:0d.0 bridge ctrl <- 0013
|
|
PCI: 00:0d.0 cmd <- 00
|
|
PCI: 00:11.0 subsystem <- 1043/8163
|
|
PCI: 00:11.0 cmd <- 03
|
|
PCI: 00:12.0 subsystem <- 1043/8163
|
|
PCI: 00:12.0 cmd <- 02
|
|
PCI: 00:12.1 subsystem <- 1043/8163
|
|
PCI: 00:12.1 cmd <- 02
|
|
PCI: 00:12.2 subsystem <- 1043/8163
|
|
PCI: 00:12.2 cmd <- 02
|
|
PCI: 00:13.0 subsystem <- 1043/8163
|
|
PCI: 00:13.0 cmd <- 02
|
|
PCI: 00:13.1 subsystem <- 1043/8163
|
|
PCI: 00:13.1 cmd <- 02
|
|
PCI: 00:13.2 subsystem <- 1043/8163
|
|
PCI: 00:13.2 cmd <- 02
|
|
PCI: 00:14.0 subsystem <- 1043/8163
|
|
PCI: 00:14.0 cmd <- 403
|
|
PCI: 00:14.1 subsystem <- 1043/8163
|
|
PCI: 00:14.1 cmd <- 01
|
|
PCI: 00:14.2 subsystem <- 1043/8163
|
|
PCI: 00:14.2 cmd <- 02
|
|
PCI: 00:14.3 subsystem <- 1043/8163
|
|
PCI: 00:14.3 cmd <- 0f
|
|
sb700 lpc decode:PNP: 002e.2, base=0x000003f8, end=0x000003ff
|
|
sb700 lpc decode:PNP: 002e.3, base=0x000002f8, end=0x000002ff
|
|
sb700 lpc decode:PNP: 002e.5, base=0x00000060, end=0x00000060
|
|
sb700 lpc decode:PNP: 002e.5, base=0x00000064, end=0x00000064
|
|
sb700 lpc decode:PNP: 002e.b, base=0x00000290, end=0x00000291
|
|
sb700 lpc decode:PNP: 0ca2.0, base=0x00000ca2, end=0x00000ca3
|
|
PCI: 00:14.4 bridge ctrl <- 001b
|
|
PCI: 00:14.4 cmd <- 07
|
|
PCI: 00:14.5 subsystem <- 1043/8163
|
|
PCI: 00:14.5 cmd <- 02
|
|
PCI: 03:00.0 cmd <- 03
|
|
PCI: 04:00.0 cmd <- 03
|
|
PCI: 08:01.0 cmd <- 03
|
|
PCI: 08:02.0 subsystem <- 1043/8163
|
|
PCI: 08:02.0 cmd <- 02
|
|
done.
|
|
BS: BS_DEV_ENABLE times (ms): entry 0 run 171 exit 0
|
|
Initializing devices...
|
|
Root Device init ...
|
|
Root Device init finished in 1398 usecs
|
|
CPU_CLUSTER: 0 init ...
|
|
Enabling probe filter
|
|
Enabling ATM mode
|
|
start_eip=0x00001000, code_size=0x00000031
|
|
Initializing CPU #1
|
|
Initializing CPU #2
|
|
CPU: vendor AMD device 600f12
|
|
Initializing CPU #8
|
|
Initializing CPU #9
|
|
CPU: vendor AMD device 600f12
|
|
CPU: family 15, model 01, stepping 02
|
|
Initializing CPU #3
|
|
nodeid = 00, coreid = 01
|
|
Initializing CPU #26
|
|
Initializing CPU #25
|
|
Initializing CPU #30
|
|
Enabling cache
|
|
Initializing CPU #0
|
|
CPU: vendor AMD device 600f12
|
|
CPU: family 15, model 01, stepping 02
|
|
Initializing CPU #22
|
|
nodeid = 00, coreid = 00
|
|
Enabling cache
|
|
CPU: vendor AMD device 600f12
|
|
CPU is Fam 0Fh rev.F or later. We can use TOM2WB for any memory above 4GB
|
|
Initializing CPU #27
|
|
Initializing CPU #15
|
|
MTRR: Physical address space:
|
|
0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6
|
|
0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0
|
|
0x00000000000c0000 - 0x00000000c0000000 size 0xbff40000 type 6
|
|
0x00000000c0000000 - 0x0000000100000000 size 0x40000000 type 0
|
|
0x0000000100000000 - 0x0000000440000000 size 0x340000000 type 6
|
|
Initializing CPU #7
|
|
MTRR: Fixed MSR 0x250 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x258 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x259 0x0000000000000000
|
|
MTRR: Fixed MSR 0x268 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x269 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26a 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26b 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26c 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26d 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26e 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26f 0x1e1e1e1e1e1e1e1e
|
|
CPU: family 15, model 01, stepping 02
|
|
CPU: vendor AMD device 600f12
|
|
MTRR: default type WB/UC MTRR counts: 1/2.
|
|
MTRR: WB selected as default type.
|
|
MTRR: 0 base 0x00000000c0000000 mask 0x0000ffffc0000000 type 0
|
|
Initializing CPU #28
|
|
CPU: vendor AMD device 600f12
|
|
|
|
MTRR check
|
|
Fixed MTRRs : Enabled
|
|
Variable MTRRs: Enabled
|
|
|
|
CPU: vendor AMD device 600f12
|
|
Setting up local APIC...
|
|
Initializing CPU #10
|
|
apic_id: 0x00 done.
|
|
Initializing CPU #21
|
|
CPU model: AMD Opteron(tm) Processor 6278
|
|
siblings = 15, Disabling SMM ASeg memory
|
|
CPU #0 initialized
|
|
Waiting for 31 CPUS to stop
|
|
|
|
MTRR check
|
|
Fixed MTRRs : Enabled
|
|
Variable MTRRs: Enabled
|
|
|
|
Initializing CPU #6
|
|
CPU: family 15, model 01, stepping 02
|
|
Setting up local APIC...
|
|
Initializing CPU #29
|
|
apic_id: 0x01 done.
|
|
CPU: family 15, model 01, stepping 02
|
|
CPU model: AMD Opteron(tm) Processor 6278
|
|
siblings = 15, CPU: vendor AMD device 600f12
|
|
Disabling SMM ASeg memory
|
|
CPU #1 initialized
|
|
Initializing CPU #12
|
|
Waiting for 30 CPUS to stop
|
|
CPU: vendor AMD device 600f12
|
|
CPU: family 15, model 01, stepping 02
|
|
Initializing CPU #4
|
|
nodeid = 01, coreid = 07
|
|
CPU: family 15, model 01, stepping 02
|
|
CPU: vendor AMD device 600f12
|
|
Initializing CPU #17
|
|
Initializing CPU #16
|
|
CPU: vendor AMD device 600f12
|
|
CPU: vendor AMD device 600f12
|
|
CPU: family 15, model 01, stepping 02
|
|
CPU: family 15, model 01, stepping 02
|
|
CPU: vendor AMD device 600f12
|
|
CPU: vendor AMD device 600f12
|
|
Initializing CPU #20
|
|
Initializing CPU #31
|
|
CPU: vendor AMD device 600f12
|
|
CPU: family 15, model 01, stepping 02
|
|
CPU: family 15, model 01, stepping 02
|
|
nodeid = 02, coreid = 05
|
|
CPU: family 15, model 01, stepping 02
|
|
CPU: vendor AMD device 600f12
|
|
CPU: vendor AMD device 600f12
|
|
CPU: vendor AMD device 600f12
|
|
CPU: family 15, model 01, stepping 02
|
|
CPU: family 15, model 01, stepping 02
|
|
CPU: vendor AMD device 600f12
|
|
CPU: vendor AMD device 600f12
|
|
Initializing CPU #11
|
|
CPU: family 15, model 01, stepping 02
|
|
nodeid = 01, coreid = 00
|
|
nodeid = 01, coreid = 01
|
|
Initializing CPU #19
|
|
Initializing CPU #18
|
|
CPU: vendor AMD device 600f12
|
|
CPU: vendor AMD device 600f12
|
|
nodeid = 02, coreid = 00
|
|
nodeid = 02, coreid = 01
|
|
Enabling cache
|
|
Initializing CPU #13
|
|
CPU: vendor AMD device 600f12
|
|
Enabling cache
|
|
CPU is Fam 0Fh rev.F or later. We can use TOM2WB for any memory above 4GB
|
|
Initializing CPU #24
|
|
nodeid = 00, coreid = 06
|
|
MTRR: Fixed MSR 0x250 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x258 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x259 0x0000000000000000
|
|
MTRR: Fixed MSR 0x268 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x269 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26a 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26b 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26c 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26d 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26e 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26f 0x1e1e1e1e1e1e1e1e
|
|
CPU: vendor AMD device 600f12
|
|
CPU: family 15, model 01, stepping 02
|
|
Initializing CPU #14
|
|
|
|
MTRR check
|
|
Fixed MTRRs : Enabled
|
|
Variable MTRRs: Enabled
|
|
|
|
nodeid = 00, coreid = 02
|
|
CPU: family 15, model 01, stepping 02
|
|
Setting up local APIC...
|
|
nodeid = 03, coreid = 04
|
|
apic_id: 0x20 done.
|
|
CPU: vendor AMD device 600f12
|
|
CPU model: AMD Opteron(tm) Processor 6278
|
|
siblings = 15, nodeid = 03, coreid = 03
|
|
Disabling SMM ASeg memory
|
|
CPU #16 initialized
|
|
|
|
MTRR check
|
|
Waiting for 29 CPUS to stop
|
|
Fixed MTRRs : Enabled
|
|
Variable MTRRs: Enabled
|
|
|
|
nodeid = 00, coreid = 07
|
|
CPU: vendor AMD device 600f12
|
|
Setting up local APIC...
|
|
Enabling cache
|
|
apic_id: 0x21 done.
|
|
nodeid = 03, coreid = 05
|
|
CPU model: AMD Opteron(tm) Processor 6278
|
|
siblings = 15, CPU: family 15, model 01, stepping 02
|
|
Disabling SMM ASeg memory
|
|
nodeid = 00, coreid = 03
|
|
CPU #17 initialized
|
|
CPU: family 15, model 01, stepping 02
|
|
Waiting for 28 CPUS to stop
|
|
Enabling cache
|
|
Enabling cache
|
|
CPU is Fam 0Fh rev.F or later. We can use TOM2WB for any memory above 4GB
|
|
CPU: vendor AMD device 600f12
|
|
MTRR: Fixed MSR 0x250 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x258 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x259 0x0000000000000000
|
|
MTRR: Fixed MSR 0x268 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x269 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26a 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26b 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26c 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26d 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26e 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26f 0x1e1e1e1e1e1e1e1e
|
|
CPU: family 15, model 01, stepping 02
|
|
Enabling cache
|
|
nodeid = 02, coreid = 04
|
|
|
|
MTRR check
|
|
Fixed MTRRs : Enabled
|
|
Variable MTRRs: Enabled
|
|
|
|
CPU is Fam 0Fh rev.F or later. We can use TOM2WB for any memory above 4GB
|
|
Setting up local APIC...
|
|
CPU: family 15, model 01, stepping 02
|
|
MTRR: Fixed MSR 0x250 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x258 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x259 0x0000000000000000
|
|
MTRR: Fixed MSR 0x268 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x269 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26a 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26b 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26c 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26d 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26e 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26f 0x1e1e1e1e1e1e1e1e
|
|
apic_id: 0x02 done.
|
|
CPU: vendor AMD device 600f12
|
|
CPU model: AMD Opteron(tm) Processor 6278
|
|
|
|
MTRR check
|
|
Fixed MTRRs : Enabled
|
|
Variable MTRRs: Enabled
|
|
|
|
siblings = 15, CPU: vendor AMD device 600f12
|
|
Setting up local APIC...
|
|
Disabling SMM ASeg memory
|
|
apic_id: 0x08 done.
|
|
|
|
MTRR check
|
|
Fixed MTRRs : Enabled
|
|
Variable MTRRs: Enabled
|
|
|
|
CPU model: AMD Opteron(tm) Processor 6278
|
|
CPU #2 initialized
|
|
Setting up local APIC...
|
|
Waiting for 27 CPUS to stop
|
|
apic_id: 0x03 done.
|
|
siblings = 15, CPU model: AMD Opteron(tm) Processor 6278
|
|
Disabling SMM ASeg memory
|
|
siblings = 15,
|
|
MTRR check
|
|
Fixed MTRRs : Enabled
|
|
Variable MTRRs: Enabled
|
|
|
|
Disabling SMM ASeg memory
|
|
Setting up local APIC...
|
|
CPU #3 initialized
|
|
apic_id: 0x09 done.
|
|
CPU #8 initialized
|
|
CPU model: AMD Opteron(tm) Processor 6278
|
|
Waiting for 26 CPUS to stop
|
|
siblings = 15, Waiting for 25 CPUS to stop
|
|
Disabling SMM ASeg memory
|
|
CPU #9 initialized
|
|
Enabling cache
|
|
Waiting for 24 CPUS to stop
|
|
Enabling cache
|
|
CPU: family 15, model 01, stepping 02
|
|
CPU is Fam 0Fh rev.F or later. We can use TOM2WB for any memory above 4GB
|
|
Enabling cache
|
|
CPU: family 15, model 01, stepping 02
|
|
MTRR: Fixed MSR 0x250 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x258 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x259 0x0000000000000000
|
|
MTRR: Fixed MSR 0x268 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x269 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26a 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26b 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26c 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26d 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26e 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26f 0x1e1e1e1e1e1e1e1e
|
|
CPU: family 15, model 01, stepping 02
|
|
nodeid = 02, coreid = 06
|
|
CPU: family 15, model 01, stepping 02
|
|
|
|
MTRR check
|
|
Fixed MTRRs : Enabled
|
|
Variable MTRRs: Enabled
|
|
|
|
Enabling cache
|
|
CPU: family 15, model 01, stepping 02
|
|
Setting up local APIC...
|
|
CPU is Fam 0Fh rev.F or later. We can use TOM2WB for any memory above 4GB
|
|
apic_id: 0x24 done.
|
|
nodeid = 03, coreid = 01
|
|
CPU model: AMD Opteron(tm) Processor 6278
|
|
MTRR: Fixed MSR 0x250 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x258 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x259 0x0000000000000000
|
|
MTRR: Fixed MSR 0x268 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x269 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26a 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26b 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26c 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26d 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26e 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26f 0x1e1e1e1e1e1e1e1e
|
|
siblings = 15, Enabling cache
|
|
Disabling SMM ASeg memory
|
|
CPU #20 initialized
|
|
|
|
MTRR check
|
|
|
|
MTRR check
|
|
Fixed MTRRs : Waiting for 23 CPUS to stop
|
|
Fixed MTRRs : Enabled
|
|
Variable MTRRs: Enabled
|
|
Variable MTRRs: Enabled
|
|
|
|
Enabled
|
|
|
|
CPU: family 15, model 01, stepping 02
|
|
Setting up local APIC...
|
|
Setting up local APIC...
|
|
apic_id: 0x25 done.
|
|
apic_id: 0x06 done.
|
|
CPU model: AMD Opteron(tm) Processor 6278
|
|
CPU model: AMD Opteron(tm) Processor 6278
|
|
siblings = 15, siblings = 15, Disabling SMM ASeg memory
|
|
Disabling SMM ASeg memory
|
|
CPU #21 initialized
|
|
|
|
MTRR check
|
|
Fixed MTRRs : Enabled
|
|
Variable MTRRs: Enabled
|
|
|
|
Waiting for 22 CPUS to stop
|
|
CPU #6 initialized
|
|
Setting up local APIC...
|
|
Waiting for 21 CPUS to stop
|
|
apic_id: 0x07 done.
|
|
nodeid = 03, coreid = 07
|
|
CPU model: AMD Opteron(tm) Processor 6278
|
|
siblings = 15, Enabling cache
|
|
Disabling SMM ASeg memory
|
|
CPU is Fam 0Fh rev.F or later. We can use TOM2WB for any memory above 4GB
|
|
CPU #7 initialized
|
|
nodeid = 02, coreid = 02
|
|
MTRR: Fixed MSR 0x250 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x258 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x259 0x0000000000000000
|
|
MTRR: Fixed MSR 0x268 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x269 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26a 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26b 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26c 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26d 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26e 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26f 0x1e1e1e1e1e1e1e1e
|
|
Waiting for 20 CPUS to stop
|
|
nodeid = 03, coreid = 02
|
|
CPU: family 15, model 01, stepping 02
|
|
|
|
MTRR check
|
|
Fixed MTRRs : Enabled
|
|
Variable MTRRs: Enabled
|
|
|
|
Enabling cache
|
|
Initializing CPU #5
|
|
Setting up local APIC...
|
|
CPU: family 15, model 01, stepping 02
|
|
apic_id: 0x2c done.
|
|
nodeid = 01, coreid = 02
|
|
CPU model: AMD Opteron(tm) Processor 6278
|
|
Initializing CPU #23
|
|
siblings = 15, nodeid = 02, coreid = 03
|
|
Disabling SMM ASeg memory
|
|
CPU: vendor AMD device 600f12
|
|
CPU #28 initialized
|
|
|
|
MTRR check
|
|
Fixed MTRRs : Enabled
|
|
Variable MTRRs: Enabled
|
|
|
|
Waiting for 19 CPUS to stop
|
|
Setting up local APIC...
|
|
CPU: family 15, model 01, stepping 02
|
|
apic_id: 0x2d done.
|
|
nodeid = 02, coreid = 07
|
|
CPU model: AMD Opteron(tm) Processor 6278
|
|
Enabling cache
|
|
siblings = 15, CPU is Fam 0Fh rev.F or later. We can use TOM2WB for any memory above 4GB
|
|
Disabling SMM ASeg memory
|
|
MTRR: Fixed MSR 0x250 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x258 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x259 0x0000000000000000
|
|
CPU #29 initialized
|
|
MTRR: Fixed MSR 0x268 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x269 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26a 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26b 0x1e1e1e1e1e1e1e1e
|
|
Waiting for 18 CPUS to stop
|
|
MTRR: Fixed MSR 0x26c 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26d 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26e 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26f 0x1e1e1e1e1e1e1e1e
|
|
nodeid = 01, coreid = 03
|
|
Enabling cache
|
|
Enabling cache
|
|
CPU: vendor AMD device 600f12
|
|
|
|
MTRR check
|
|
Fixed MTRRs : Enabled
|
|
Variable MTRRs: Enabled
|
|
|
|
Enabling cache
|
|
Enabling cache
|
|
Setting up local APIC...
|
|
CPU is Fam 0Fh rev.F or later. We can use TOM2WB for any memory above 4GB
|
|
apic_id: 0x26 done.
|
|
CPU: family 15, model 01, stepping 02
|
|
CPU model: AMD Opteron(tm) Processor 6278
|
|
MTRR: Fixed MSR 0x250 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x258 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x259 0x0000000000000000
|
|
MTRR: Fixed MSR 0x268 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x269 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26a 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26b 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26c 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26d 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26e 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26f 0x1e1e1e1e1e1e1e1e
|
|
siblings = 15, nodeid = 03, coreid = 00
|
|
Disabling SMM ASeg memory
|
|
CPU #22 initialized
|
|
|
|
MTRR check
|
|
Fixed MTRRs : Enabled
|
|
Variable MTRRs: Enabled
|
|
|
|
|
|
MTRR check
|
|
Waiting for 17 CPUS to stop
|
|
Fixed MTRRs : Setting up local APIC...
|
|
Enabled
|
|
apic_id: 0x2a done.
|
|
Variable MTRRs: Enabled
|
|
|
|
CPU model: AMD Opteron(tm) Processor 6278
|
|
Setting up local APIC...
|
|
siblings = 15, apic_id: 0x27 done.
|
|
Disabling SMM ASeg memory
|
|
CPU model: AMD Opteron(tm) Processor 6278
|
|
CPU #26 initialized
|
|
siblings = 15,
|
|
MTRR check
|
|
Fixed MTRRs : Enabled
|
|
Variable MTRRs: Enabled
|
|
|
|
Waiting for 16 CPUS to stop
|
|
Setting up local APIC...
|
|
Disabling SMM ASeg memory
|
|
apic_id: 0x2b done.
|
|
CPU #23 initialized
|
|
CPU model: AMD Opteron(tm) Processor 6278
|
|
Waiting for 15 CPUS to stop
|
|
siblings = 15, Enabling cache
|
|
Disabling SMM ASeg memory
|
|
nodeid = 01, coreid = 06
|
|
CPU #27 initialized
|
|
Enabling cache
|
|
Waiting for 14 CPUS to stop
|
|
CPU is Fam 0Fh rev.F or later. We can use TOM2WB for any memory above 4GB
|
|
Enabling cache
|
|
nodeid = 03, coreid = 06
|
|
MTRR: Fixed MSR 0x250 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x258 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x259 0x0000000000000000
|
|
MTRR: Fixed MSR 0x268 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x269 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26a 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26b 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26c 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26d 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26e 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26f 0x1e1e1e1e1e1e1e1e
|
|
Enabling cache
|
|
Enabling cache
|
|
CPU is Fam 0Fh rev.F or later. We can use TOM2WB for any memory above 4GB
|
|
CPU is Fam 0Fh rev.F or later. We can use TOM2WB for any memory above 4GB
|
|
|
|
MTRR check
|
|
Fixed MTRRs : Enabled
|
|
Variable MTRRs: MTRR: Fixed MSR 0x250 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x258 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x259 0x0000000000000000
|
|
MTRR: Fixed MSR 0x268 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x269 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26a 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26b 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26c 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26d 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26e 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26f 0x1e1e1e1e1e1e1e1e
|
|
Enabled
|
|
MTRR: Fixed MSR 0x250 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x258 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x259 0x0000000000000000
|
|
MTRR: Fixed MSR 0x268 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x269 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26a 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26b 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26c 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26d 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26e 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26f 0x1e1e1e1e1e1e1e1e
|
|
|
|
|
|
MTRR check
|
|
Fixed MTRRs : Enabled
|
|
Variable MTRRs: Enabled
|
|
|
|
Setting up local APIC...
|
|
|
|
MTRR check
|
|
Fixed MTRRs : Enabled
|
|
Variable MTRRs: Enabled
|
|
|
|
Setting up local APIC...
|
|
apic_id: 0x22 done.
|
|
apic_id: 0x2e done.
|
|
Setting up local APIC...
|
|
CPU model: AMD Opteron(tm) Processor 6278
|
|
apic_id: 0x0a done.
|
|
siblings = 15, CPU model: AMD Opteron(tm) Processor 6278
|
|
CPU model: AMD Opteron(tm) Processor 6278
|
|
Disabling SMM ASeg memory
|
|
siblings = 15, siblings = 15,
|
|
MTRR check
|
|
Fixed MTRRs : Enabled
|
|
Variable MTRRs: Enabled
|
|
|
|
CPU #30 initialized
|
|
Setting up local APIC...
|
|
Waiting for 13 CPUS to stop
|
|
apic_id: 0x2f done.
|
|
Disabling SMM ASeg memory
|
|
CPU model: AMD Opteron(tm) Processor 6278
|
|
CPU #10 initialized
|
|
|
|
MTRR check
|
|
Fixed MTRRs : Enabled
|
|
Variable MTRRs: Enabled
|
|
|
|
siblings = 15, Waiting for 12 CPUS to stop
|
|
Disabling SMM ASeg memory
|
|
Disabling SMM ASeg memory
|
|
Setting up local APIC...
|
|
CPU #31 initialized
|
|
apic_id: 0x0b done.
|
|
Waiting for 11 CPUS to stop
|
|
CPU model: AMD Opteron(tm) Processor 6278
|
|
|
|
MTRR check
|
|
Fixed MTRRs : Enabled
|
|
Variable MTRRs: siblings = 15, CPU #18 initialized
|
|
Disabling SMM ASeg memory
|
|
Enabled
|
|
|
|
Waiting for 10 CPUS to stop
|
|
CPU #11 initialized
|
|
Setting up local APIC...
|
|
Waiting for 9 CPUS to stop
|
|
apic_id: 0x23 done.
|
|
Enabling cache
|
|
CPU model: AMD Opteron(tm) Processor 6278
|
|
CPU is Fam 0Fh rev.F or later. We can use TOM2WB for any memory above 4GB
|
|
siblings = 15, nodeid = 00, coreid = 04
|
|
Disabling SMM ASeg memory
|
|
MTRR: Fixed MSR 0x250 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x258 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x259 0x0000000000000000
|
|
MTRR: Fixed MSR 0x268 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x269 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26a 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26b 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26c 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26d 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26e 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26f 0x1e1e1e1e1e1e1e1e
|
|
CPU #19 initialized
|
|
Enabling cache
|
|
Waiting for 8 CPUS to stop
|
|
CPU: vendor AMD device 600f12
|
|
|
|
MTRR check
|
|
Fixed MTRRs : Enabled
|
|
Variable MTRRs: Enabled
|
|
|
|
CPU: family 15, model 01, stepping 02
|
|
Setting up local APIC...
|
|
Enabling cache
|
|
apic_id: 0x28 done.
|
|
nodeid = 00, coreid = 05
|
|
CPU model: AMD Opteron(tm) Processor 6278
|
|
Enabling cache
|
|
siblings = 15, CPU is Fam 0Fh rev.F or later. We can use TOM2WB for any memory above 4GB
|
|
Disabling SMM ASeg memory
|
|
MTRR: Fixed MSR 0x250 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x258 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x259 0x0000000000000000
|
|
MTRR: Fixed MSR 0x268 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x269 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26a 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26b 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26c 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26d 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26e 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26f 0x1e1e1e1e1e1e1e1e
|
|
|
|
MTRR check
|
|
Fixed MTRRs : Enabled
|
|
Variable MTRRs: Enabled
|
|
|
|
nodeid = 01, coreid = 05
|
|
|
|
MTRR check
|
|
Fixed MTRRs : Enabled
|
|
Variable MTRRs: Enabled
|
|
|
|
Setting up local APIC...
|
|
CPU #24 initialized
|
|
Setting up local APIC...
|
|
Waiting for 7 CPUS to stop
|
|
apic_id: 0x29 done.
|
|
apic_id: 0x04 done.
|
|
CPU model: AMD Opteron(tm) Processor 6278
|
|
CPU model: AMD Opteron(tm) Processor 6278
|
|
siblings = 15, siblings = 15, Disabling SMM ASeg memory
|
|
Disabling SMM ASeg memory
|
|
CPU #25 initialized
|
|
CPU #4 initialized
|
|
|
|
MTRR check
|
|
Fixed MTRRs : Enabled
|
|
Variable MTRRs: Enabled
|
|
|
|
Waiting for 6 CPUS to stop
|
|
Setting up local APIC...
|
|
Waiting for 5 CPUS to stop
|
|
apic_id: 0x05 done.
|
|
Enabling cache
|
|
CPU model: AMD Opteron(tm) Processor 6278
|
|
nodeid = 01, coreid = 04
|
|
siblings = 15, Enabling cache
|
|
Disabling SMM ASeg memory
|
|
CPU is Fam 0Fh rev.F or later. We can use TOM2WB for any memory above 4GB
|
|
CPU #5 initialized
|
|
Waiting for 4 CPUS to stop
|
|
MTRR: Fixed MSR 0x250 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x258 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x259 0x0000000000000000
|
|
MTRR: Fixed MSR 0x268 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x269 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26a 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26b 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26c 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26d 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26e 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26f 0x1e1e1e1e1e1e1e1e
|
|
Enabling cache
|
|
CPU is Fam 0Fh rev.F or later. We can use TOM2WB for any memory above 4GB
|
|
|
|
MTRR check
|
|
Fixed MTRRs : Enabled
|
|
Variable MTRRs: Enabled
|
|
|
|
MTRR: Fixed MSR 0x250 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x258 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x259 0x0000000000000000
|
|
MTRR: Fixed MSR 0x268 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x269 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26a 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26b 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26c 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26d 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26e 0x1e1e1e1e1e1e1e1e
|
|
MTRR: Fixed MSR 0x26f 0x1e1e1e1e1e1e1e1e
|
|
Setting up local APIC...
|
|
apic_id: 0x0c done.
|
|
CPU model: AMD Opteron(tm) Processor 6278
|
|
|
|
MTRR check
|
|
Fixed MTRRs : Enabled
|
|
Variable MTRRs: Enabled
|
|
|
|
siblings = 15, Disabling SMM ASeg memory
|
|
Setting up local APIC...
|
|
CPU #12 initialized
|
|
apic_id: 0x0e done.
|
|
|
|
MTRR check
|
|
Fixed MTRRs : Enabled
|
|
Variable MTRRs: Enabled
|
|
|
|
CPU model: AMD Opteron(tm) Processor 6278
|
|
Setting up local APIC...
|
|
Waiting for 3 CPUS to stop
|
|
apic_id: 0x0d done.
|
|
siblings = 15, CPU model: AMD Opteron(tm) Processor 6278
|
|
Disabling SMM ASeg memory
|
|
siblings = 15, CPU #14 initialized
|
|
Disabling SMM ASeg memory
|
|
|
|
MTRR check
|
|
Fixed MTRRs : Enabled
|
|
CPU #13 initialized
|
|
Waiting for 2 CPUS to stop
|
|
Variable MTRRs: Enabled
|
|
|
|
Waiting for 1 CPUS to stop
|
|
Setting up local APIC...
|
|
apic_id: 0x0f done.
|
|
CPU model: AMD Opteron(tm) Processor 6278
|
|
siblings = 15, Disabling SMM ASeg memory
|
|
CPU #15 initialized
|
|
All AP CPUs stopped (141877 loops)
|
|
CPU_CLUSTER: 0 init finished in 1369264 usecs
|
|
PCI: 00:18.0 init ...
|
|
PCI: 00:18.0 init finished in 1460 usecs
|
|
PCI: 00:18.1 init ...
|
|
PCI: 00:18.1 init finished in 1462 usecs
|
|
PCI: 00:18.2 init ...
|
|
PCI: 00:18.2 init finished in 1462 usecs
|
|
PCI: 00:18.3 init ...
|
|
NB: Function 3 Misc Control.. done.
|
|
PCI: 00:18.3 init finished in 3819 usecs
|
|
PCI: 00:18.4 init ...
|
|
NB: Function 4 Link Control.. done.
|
|
PCI: 00:18.4 init finished in 3819 usecs
|
|
PCI: 00:18.5 init ...
|
|
NB: Function 5 Northbridge Control.. done.
|
|
PCI: 00:18.5 init finished in 4259 usecs
|
|
PCI: 00:19.0 init ...
|
|
PCI: 00:19.0 init finished in 1461 usecs
|
|
PCI: 00:19.1 init ...
|
|
PCI: 00:19.1 init finished in 1462 usecs
|
|
PCI: 00:19.2 init ...
|
|
PCI: 00:19.2 init finished in 1462 usecs
|
|
PCI: 00:19.3 init ...
|
|
NB: Function 3 Misc Control.. done.
|
|
PCI: 00:19.3 init finished in 3820 usecs
|
|
PCI: 00:19.4 init ...
|
|
NB: Function 4 Link Control.. done.
|
|
PCI: 00:19.4 init finished in 3819 usecs
|
|
PCI: 00:19.5 init ...
|
|
NB: Function 5 Northbridge Control.. done.
|
|
PCI: 00:19.5 init finished in 4261 usecs
|
|
PCI: 00:1a.0 init ...
|
|
PCI: 00:1a.0 init finished in 1462 usecs
|
|
PCI: 00:1a.1 init ...
|
|
PCI: 00:1a.1 init finished in 1462 usecs
|
|
PCI: 00:1a.2 init ...
|
|
PCI: 00:1a.2 init finished in 1462 usecs
|
|
PCI: 00:1a.3 init ...
|
|
NB: Function 3 Misc Control.. done.
|
|
PCI: 00:1a.3 init finished in 3820 usecs
|
|
PCI: 00:1a.4 init ...
|
|
NB: Function 4 Link Control.. done.
|
|
PCI: 00:1a.4 init finished in 3819 usecs
|
|
PCI: 00:1a.5 init ...
|
|
NB: Function 5 Northbridge Control.. done.
|
|
PCI: 00:1a.5 init finished in 4260 usecs
|
|
PCI: 00:1b.0 init ...
|
|
PCI: 00:1b.0 init finished in 1461 usecs
|
|
PCI: 00:1b.1 init ...
|
|
PCI: 00:1b.1 init finished in 1463 usecs
|
|
PCI: 00:1b.2 init ...
|
|
PCI: 00:1b.2 init finished in 1462 usecs
|
|
PCI: 00:1b.3 init ...
|
|
NB: Function 3 Misc Control.. done.
|
|
PCI: 00:1b.3 init finished in 3819 usecs
|
|
PCI: 00:1b.4 init ...
|
|
NB: Function 4 Link Control.. done.
|
|
PCI: 00:1b.4 init finished in 3818 usecs
|
|
PCI: 00:1b.5 init ...
|
|
NB: Function 5 Northbridge Control.. done.
|
|
PCI: 00:1b.5 init finished in 4261 usecs
|
|
PCI: 00:00.0 init ...
|
|
pcie_init in sr5650_ht.c
|
|
IOAPIC: Initializing IOAPIC at 0xfcc00000
|
|
IOAPIC: Bootstrap Processor Local APIC = 0x00
|
|
IOAPIC: ID = 0x01
|
|
IOAPIC: 32 interrupts
|
|
IOAPIC: Enabling interrupts on FSB
|
|
PCI: 00:00.0 init finished in 13766 usecs
|
|
PCI: 00:11.0 init ...
|
|
Primary Master device is ready after 1 tries
|
|
No Primary Slave SATA drive on Slot1
|
|
No Secondary Master SATA drive on Slot2
|
|
No Secondary Slave SATA drive on Slot3
|
|
PCI: 00:11.0 init finished in 17783 usecs
|
|
PCI: 00:12.0 init ...
|
|
PCI: 00:12.0 init finished in 1484 usecs
|
|
PCI: 00:12.1 init ...
|
|
PCI: 00:12.1 init finished in 1485 usecs
|
|
PCI: 00:12.2 init ...
|
|
usb2_bar0=0xfcb0e000
|
|
rpr 6.23, final dword=809e03c8
|
|
PCI: 00:12.2 init finished in 4897 usecs
|
|
PCI: 00:13.0 init ...
|
|
PCI: 00:13.0 init finished in 1484 usecs
|
|
PCI: 00:13.1 init ...
|
|
PCI: 00:13.1 init finished in 1484 usecs
|
|
PCI: 00:13.2 init ...
|
|
usb2_bar0=0xfcb0f000
|
|
rpr 6.23, final dword=809e03c8
|
|
PCI: 00:13.2 init finished in 4897 usecs
|
|
PCI: 00:14.0 init ...
|
|
sm_init().
|
|
IOAPIC: Initializing IOAPIC at 0xfec00000
|
|
IOAPIC: Bootstrap Processor Local APIC = 0x00
|
|
IOAPIC: 24 interrupts
|
|
IOAPIC: Enabling interrupts on FSB
|
|
set power "off" after power fail
|
|
++++++++++no set NMI+++++
|
|
RTC Init
|
|
sm_init() end
|
|
PCI: 00:14.0 init finished in 17363 usecs
|
|
PCI: 00:14.1 init ...
|
|
PCI: 00:14.1 init finished in 1466 usecs
|
|
PCI: 00:14.2 init ...
|
|
base = 0xfcb04000
|
|
No codec!
|
|
PCI: 00:14.2 init finished in 6296 usecs
|
|
PCI: 00:14.3 init ...
|
|
PCI: 00:14.3 init finished in 1485 usecs
|
|
PCI: 00:14.4 init ...
|
|
PCI: 00:14.4 init finished in 1479 usecs
|
|
PCI: 00:14.5 init ...
|
|
PCI: 00:14.5 init finished in 1483 usecs
|
|
PCI: 03:00.0 init ...
|
|
PCI: 03:00.0 init finished in 1462 usecs
|
|
PCI: 04:00.0 init ...
|
|
PCI: 04:00.0 init finished in 1462 usecs
|
|
smbus: PCI: 00:14.0[0]->I2C: 01:2f init ...
|
|
Set SMBUS controller to channel 1
|
|
Found 64 pin W83795G Nuvoton H/W Monitor
|
|
W83795G/ADG work in Thermal Cruise Mode
|
|
Fan CTFS(celsius) TTTI(celsius)
|
|
1 80 80
|
|
2 80 80
|
|
3 80 80
|
|
4 80 80
|
|
5 80 80
|
|
6 80 80
|
|
DTS1 current value: 16
|
|
DTS2 current value: 17
|
|
DTS3 current value: 0
|
|
DTS4 current value: 0
|
|
DTS5 current value: 0
|
|
DTS6 current value: 0
|
|
DTS7 current value: 0
|
|
DTS8 current value: 0
|
|
Set SMBUS controller to channel 0
|
|
I2C: 01:2f init finished in 283853 usecs
|
|
PNP: 002e.2 init ...
|
|
PNP: 002e.2 init finished in 1398 usecs
|
|
PNP: 002e.3 init ...
|
|
PNP: 002e.3 init finished in 1398 usecs
|
|
PNP: 002e.5 init ...
|
|
w83667hg_a_init: Disable mouse controller.PNP: 002e.5 init finished in 4073 usecs
|
|
PNP: 002e.a init ...
|
|
set power off after power fail
|
|
PNP: 002e.a init finished in 3435 usecs
|
|
PNP: 002e.b init ...
|
|
PNP: 002e.b init finished in 1399 usecs
|
|
PNP: 0ca2.0 init ...
|
|
IPMI: PNP KCS 0xca2
|
|
Get BMC self test result...BMC: Device Specific Error
|
|
IPMI: Found man_id 0x00a015, prod_id 0x3146
|
|
IPMI: Version 2.0
|
|
PNP: 0ca2.0 init finished in 17699 usecs
|
|
PCI: 08:01.0 init ...
|
|
ASpeed AST2050: initializing video device
|
|
ast_detect_chip: AST 1100 detected
|
|
ast_detect_chip: VGA not enabled on entry, requesting chip POST
|
|
ast_detect_chip: Analog VGA only
|
|
ast_driver_load: dram 800000000 0 16 00800000
|
|
ASpeed VGA text mode initialized
|
|
PCI: 08:01.0 init finished in 31811 usecs
|
|
PCI: 08:02.0 init ...
|
|
PCI: 08:02.0 init finished in 1461 usecs
|
|
Devices initialized
|
|
BS: BS_DEV_INIT times (ms): entry 0 run 2001 exit 0
|
|
Finalize devices...
|
|
Devices finalized
|
|
BS: BS_POST_DEVICE times (ms): entry 0 run 3 exit 0
|
|
BS: BS_OS_RESUME_CHECK times (ms): entry 0 run 0 exit 0
|
|
Writing IRQ routing tables to 0xf0000...done.
|
|
Writing IRQ routing tables to 0xbffdf000...done.
|
|
PIRQ table: 48 bytes.
|
|
Wrote the mp table end at: 000f0410 - 000f08ac
|
|
Wrote the mp table end at: bffde010 - bffde4ac
|
|
MP table: 1196 bytes.
|
|
FMAP: area COREBOOT found @ 200 (2096640 bytes)
|
|
CBFS: 'COREBOOT Locator' located CBFS at [200:200000)
|
|
CBFS: Locating 'fallback/dsdt.aml'
|
|
CBFS: Found @ offset 46ec0 size 26a7
|
|
FMAP: area COREBOOT found @ 200 (2096640 bytes)
|
|
CBFS: 'COREBOOT Locator' located CBFS at [200:200000)
|
|
CBFS: Locating 'fallback/slic'
|
|
CBFS: 'fallback/slic' not found.
|
|
ACPI: Writing ACPI tables at bffba000.
|
|
ACPI: * FACS
|
|
ACPI: * DSDT
|
|
ACPI: * FADT
|
|
pm_base: 0x0800
|
|
ACPI: added table 1/32, length now 40
|
|
ACPI: * SSDT
|
|
processor_brand=AMD Opteron(tm) Processor 6278
|
|
Pstates algorithm ...
|
|
Pstate_freq[0] = 2400MHz Pstate_power[0] = 6225mw
|
|
Pstate_latency[0] = 5us
|
|
Pstate_freq[1] = 2100MHz Pstate_power[1] = 5300mw
|
|
Pstate_latency[1] = 5us
|
|
Pstate_freq[2] = 1900MHz Pstate_power[2] = 4680mw
|
|
Pstate_latency[2] = 5us
|
|
Pstate_freq[3] = 1600MHz Pstate_power[3] = 3990mw
|
|
Pstate_latency[3] = 5us
|
|
Pstate_freq[4] = 1400MHz Pstate_power[4] = 3422mw
|
|
Pstate_latency[4] = 5us
|
|
PSS: 2400MHz power 6225 control 0x0 status 0x0
|
|
PSS: 2100MHz power 5300 control 0x1 status 0x1
|
|
PSS: 1900MHz power 4680 control 0x2 status 0x2
|
|
PSS: 1600MHz power 3990 control 0x3 status 0x3
|
|
PSS: 1400MHz power 3422 control 0x4 status 0x4
|
|
PSS: 2400MHz power 6225 control 0x0 status 0x0
|
|
PSS: 2100MHz power 5300 control 0x1 status 0x1
|
|
PSS: 1900MHz power 4680 control 0x2 status 0x2
|
|
PSS: 1600MHz power 3990 control 0x3 status 0x3
|
|
PSS: 1400MHz power 3422 control 0x4 status 0x4
|
|
PSS: 2400MHz power 6225 control 0x0 status 0x0
|
|
PSS: 2100MHz power 5300 control 0x1 status 0x1
|
|
PSS: 1900MHz power 4680 control 0x2 status 0x2
|
|
PSS: 1600MHz power 3990 control 0x3 status 0x3
|
|
PSS: 1400MHz power 3422 control 0x4 status 0x4
|
|
PSS: 2400MHz power 6225 control 0x0 status 0x0
|
|
PSS: 2100MHz power 5300 control 0x1 status 0x1
|
|
PSS: 1900MHz power 4680 control 0x2 status 0x2
|
|
PSS: 1600MHz power 3990 control 0x3 status 0x3
|
|
PSS: 1400MHz power 3422 control 0x4 status 0x4
|
|
PSS: 2400MHz power 6225 control 0x0 status 0x0
|
|
PSS: 2100MHz power 5300 control 0x1 status 0x1
|
|
PSS: 1900MHz power 4680 control 0x2 status 0x2
|
|
PSS: 1600MHz power 3990 control 0x3 status 0x3
|
|
PSS: 1400MHz power 3422 control 0x4 status 0x4
|
|
PSS: 2400MHz power 6225 control 0x0 status 0x0
|
|
PSS: 2100MHz power 5300 control 0x1 status 0x1
|
|
PSS: 1900MHz power 4680 control 0x2 status 0x2
|
|
PSS: 1600MHz power 3990 control 0x3 status 0x3
|
|
PSS: 1400MHz power 3422 control 0x4 status 0x4
|
|
PSS: 2400MHz power 6225 control 0x0 status 0x0
|
|
PSS: 2100MHz power 5300 control 0x1 status 0x1
|
|
PSS: 1900MHz power 4680 control 0x2 status 0x2
|
|
PSS: 1600MHz power 3990 control 0x3 status 0x3
|
|
PSS: 1400MHz power 3422 control 0x4 status 0x4
|
|
PSS: 2400MHz power 6225 control 0x0 status 0x0
|
|
PSS: 2100MHz power 5300 control 0x1 status 0x1
|
|
PSS: 1900MHz power 4680 control 0x2 status 0x2
|
|
PSS: 1600MHz power 3990 control 0x3 status 0x3
|
|
PSS: 1400MHz power 3422 control 0x4 status 0x4
|
|
PSS: 2400MHz power 6225 control 0x0 status 0x0
|
|
PSS: 2100MHz power 5300 control 0x1 status 0x1
|
|
PSS: 1900MHz power 4680 control 0x2 status 0x2
|
|
PSS: 1600MHz power 3990 control 0x3 status 0x3
|
|
PSS: 1400MHz power 3422 control 0x4 status 0x4
|
|
PSS: 2400MHz power 6225 control 0x0 status 0x0
|
|
PSS: 2100MHz power 5300 control 0x1 status 0x1
|
|
PSS: 1900MHz power 4680 control 0x2 status 0x2
|
|
PSS: 1600MHz power 3990 control 0x3 status 0x3
|
|
PSS: 1400MHz power 3422 control 0x4 status 0x4
|
|
PSS: 2400MHz power 6225 control 0x0 status 0x0
|
|
PSS: 2100MHz power 5300 control 0x1 status 0x1
|
|
PSS: 1900MHz power 4680 control 0x2 status 0x2
|
|
PSS: 1600MHz power 3990 control 0x3 status 0x3
|
|
PSS: 1400MHz power 3422 control 0x4 status 0x4
|
|
PSS: 2400MHz power 6225 control 0x0 status 0x0
|
|
PSS: 2100MHz power 5300 control 0x1 status 0x1
|
|
PSS: 1900MHz power 4680 control 0x2 status 0x2
|
|
PSS: 1600MHz power 3990 control 0x3 status 0x3
|
|
PSS: 1400MHz power 3422 control 0x4 status 0x4
|
|
PSS: 2400MHz power 6225 control 0x0 status 0x0
|
|
PSS: 2100MHz power 5300 control 0x1 status 0x1
|
|
PSS: 1900MHz power 4680 control 0x2 status 0x2
|
|
PSS: 1600MHz power 3990 control 0x3 status 0x3
|
|
PSS: 1400MHz power 3422 control 0x4 status 0x4
|
|
PSS: 2400MHz power 6225 control 0x0 status 0x0
|
|
PSS: 2100MHz power 5300 control 0x1 status 0x1
|
|
PSS: 1900MHz power 4680 control 0x2 status 0x2
|
|
PSS: 1600MHz power 3990 control 0x3 status 0x3
|
|
PSS: 1400MHz power 3422 control 0x4 status 0x4
|
|
PSS: 2400MHz power 6225 control 0x0 status 0x0
|
|
PSS: 2100MHz power 5300 control 0x1 status 0x1
|
|
PSS: 1900MHz power 4680 control 0x2 status 0x2
|
|
PSS: 1600MHz power 3990 control 0x3 status 0x3
|
|
PSS: 1400MHz power 3422 control 0x4 status 0x4
|
|
PSS: 2400MHz power 6225 control 0x0 status 0x0
|
|
PSS: 2100MHz power 5300 control 0x1 status 0x1
|
|
PSS: 1900MHz power 4680 control 0x2 status 0x2
|
|
PSS: 1600MHz power 3990 control 0x3 status 0x3
|
|
PSS: 1400MHz power 3422 control 0x4 status 0x4
|
|
PSS: 2400MHz power 6225 control 0x0 status 0x0
|
|
PSS: 2100MHz power 5300 control 0x1 status 0x1
|
|
PSS: 1900MHz power 4680 control 0x2 status 0x2
|
|
PSS: 1600MHz power 3990 control 0x3 status 0x3
|
|
PSS: 1400MHz power 3422 control 0x4 status 0x4
|
|
PSS: 2400MHz power 6225 control 0x0 status 0x0
|
|
PSS: 2100MHz power 5300 control 0x1 status 0x1
|
|
PSS: 1900MHz power 4680 control 0x2 status 0x2
|
|
PSS: 1600MHz power 3990 control 0x3 status 0x3
|
|
PSS: 1400MHz power 3422 control 0x4 status 0x4
|
|
PSS: 2400MHz power 6225 control 0x0 status 0x0
|
|
PSS: 2100MHz power 5300 control 0x1 status 0x1
|
|
PSS: 1900MHz power 4680 control 0x2 status 0x2
|
|
PSS: 1600MHz power 3990 control 0x3 status 0x3
|
|
PSS: 1400MHz power 3422 control 0x4 status 0x4
|
|
PSS: 2400MHz power 6225 control 0x0 status 0x0
|
|
PSS: 2100MHz power 5300 control 0x1 status 0x1
|
|
PSS: 1900MHz power 4680 control 0x2 status 0x2
|
|
PSS: 1600MHz power 3990 control 0x3 status 0x3
|
|
PSS: 1400MHz power 3422 control 0x4 status 0x4
|
|
PSS: 2400MHz power 6225 control 0x0 status 0x0
|
|
PSS: 2100MHz power 5300 control 0x1 status 0x1
|
|
PSS: 1900MHz power 4680 control 0x2 status 0x2
|
|
PSS: 1600MHz power 3990 control 0x3 status 0x3
|
|
PSS: 1400MHz power 3422 control 0x4 status 0x4
|
|
PSS: 2400MHz power 6225 control 0x0 status 0x0
|
|
PSS: 2100MHz power 5300 control 0x1 status 0x1
|
|
PSS: 1900MHz power 4680 control 0x2 status 0x2
|
|
PSS: 1600MHz power 3990 control 0x3 status 0x3
|
|
PSS: 1400MHz power 3422 control 0x4 status 0x4
|
|
PSS: 2400MHz power 6225 control 0x0 status 0x0
|
|
PSS: 2100MHz power 5300 control 0x1 status 0x1
|
|
PSS: 1900MHz power 4680 control 0x2 status 0x2
|
|
PSS: 1600MHz power 3990 control 0x3 status 0x3
|
|
PSS: 1400MHz power 3422 control 0x4 status 0x4
|
|
PSS: 2400MHz power 6225 control 0x0 status 0x0
|
|
PSS: 2100MHz power 5300 control 0x1 status 0x1
|
|
PSS: 1900MHz power 4680 control 0x2 status 0x2
|
|
PSS: 1600MHz power 3990 control 0x3 status 0x3
|
|
PSS: 1400MHz power 3422 control 0x4 status 0x4
|
|
PSS: 2400MHz power 6225 control 0x0 status 0x0
|
|
PSS: 2100MHz power 5300 control 0x1 status 0x1
|
|
PSS: 1900MHz power 4680 control 0x2 status 0x2
|
|
PSS: 1600MHz power 3990 control 0x3 status 0x3
|
|
PSS: 1400MHz power 3422 control 0x4 status 0x4
|
|
PSS: 2400MHz power 6225 control 0x0 status 0x0
|
|
PSS: 2100MHz power 5300 control 0x1 status 0x1
|
|
PSS: 1900MHz power 4680 control 0x2 status 0x2
|
|
PSS: 1600MHz power 3990 control 0x3 status 0x3
|
|
PSS: 1400MHz power 3422 control 0x4 status 0x4
|
|
PSS: 2400MHz power 6225 control 0x0 status 0x0
|
|
PSS: 2100MHz power 5300 control 0x1 status 0x1
|
|
PSS: 1900MHz power 4680 control 0x2 status 0x2
|
|
PSS: 1600MHz power 3990 control 0x3 status 0x3
|
|
PSS: 1400MHz power 3422 control 0x4 status 0x4
|
|
PSS: 2400MHz power 6225 control 0x0 status 0x0
|
|
PSS: 2100MHz power 5300 control 0x1 status 0x1
|
|
PSS: 1900MHz power 4680 control 0x2 status 0x2
|
|
PSS: 1600MHz power 3990 control 0x3 status 0x3
|
|
PSS: 1400MHz power 3422 control 0x4 status 0x4
|
|
PSS: 2400MHz power 6225 control 0x0 status 0x0
|
|
PSS: 2100MHz power 5300 control 0x1 status 0x1
|
|
PSS: 1900MHz power 4680 control 0x2 status 0x2
|
|
PSS: 1600MHz power 3990 control 0x3 status 0x3
|
|
PSS: 1400MHz power 3422 control 0x4 status 0x4
|
|
PSS: 2400MHz power 6225 control 0x0 status 0x0
|
|
PSS: 2100MHz power 5300 control 0x1 status 0x1
|
|
PSS: 1900MHz power 4680 control 0x2 status 0x2
|
|
PSS: 1600MHz power 3990 control 0x3 status 0x3
|
|
PSS: 1400MHz power 3422 control 0x4 status 0x4
|
|
PSS: 2400MHz power 6225 control 0x0 status 0x0
|
|
PSS: 2100MHz power 5300 control 0x1 status 0x1
|
|
PSS: 1900MHz power 4680 control 0x2 status 0x2
|
|
PSS: 1600MHz power 3990 control 0x3 status 0x3
|
|
PSS: 1400MHz power 3422 control 0x4 status 0x4
|
|
PSS: 2400MHz power 6225 control 0x0 status 0x0
|
|
PSS: 2100MHz power 5300 control 0x1 status 0x1
|
|
PSS: 1900MHz power 4680 control 0x2 status 0x2
|
|
PSS: 1600MHz power 3990 control 0x3 status 0x3
|
|
PSS: 1400MHz power 3422 control 0x4 status 0x4
|
|
\_SB.PCI0.LPC.TPM: LPC TPM PNP: 004e.0
|
|
ACPI: added table 2/32, length now 44
|
|
ACPI: * MCFG
|
|
ACPI: added table 3/32, length now 48
|
|
ACPI: * MADT
|
|
ACPI: added table 4/32, length now 52
|
|
current = bffbfa10
|
|
ACPI: * SRAT at bffbfa10
|
|
SRAT: lapic cpu_index=00, node_id=00, apic_id=00
|
|
SRAT: lapic cpu_index=01, node_id=00, apic_id=01
|
|
SRAT: lapic cpu_index=02, node_id=00, apic_id=02
|
|
SRAT: lapic cpu_index=03, node_id=00, apic_id=03
|
|
SRAT: lapic cpu_index=04, node_id=00, apic_id=04
|
|
SRAT: lapic cpu_index=05, node_id=00, apic_id=05
|
|
SRAT: lapic cpu_index=06, node_id=00, apic_id=06
|
|
SRAT: lapic cpu_index=07, node_id=00, apic_id=07
|
|
SRAT: lapic cpu_index=08, node_id=01, apic_id=08
|
|
SRAT: lapic cpu_index=09, node_id=01, apic_id=09
|
|
SRAT: lapic cpu_index=0a, node_id=01, apic_id=0a
|
|
SRAT: lapic cpu_index=0b, node_id=01, apic_id=0b
|
|
SRAT: lapic cpu_index=0c, node_id=01, apic_id=0c
|
|
SRAT: lapic cpu_index=0d, node_id=01, apic_id=0d
|
|
SRAT: lapic cpu_index=0e, node_id=01, apic_id=0e
|
|
SRAT: lapic cpu_index=0f, node_id=01, apic_id=0f
|
|
SRAT: lapic cpu_index=10, node_id=02, apic_id=20
|
|
SRAT: lapic cpu_index=11, node_id=02, apic_id=21
|
|
SRAT: lapic cpu_index=12, node_id=02, apic_id=22
|
|
SRAT: lapic cpu_index=13, node_id=02, apic_id=23
|
|
SRAT: lapic cpu_index=14, node_id=02, apic_id=24
|
|
SRAT: lapic cpu_index=15, node_id=02, apic_id=25
|
|
SRAT: lapic cpu_index=16, node_id=02, apic_id=26
|
|
SRAT: lapic cpu_index=17, node_id=02, apic_id=27
|
|
SRAT: lapic cpu_index=18, node_id=03, apic_id=28
|
|
SRAT: lapic cpu_index=19, node_id=03, apic_id=29
|
|
SRAT: lapic cpu_index=1a, node_id=03, apic_id=2a
|
|
SRAT: lapic cpu_index=1b, node_id=03, apic_id=2b
|
|
SRAT: lapic cpu_index=1c, node_id=03, apic_id=2c
|
|
SRAT: lapic cpu_index=1d, node_id=03, apic_id=2d
|
|
SRAT: lapic cpu_index=1e, node_id=03, apic_id=2e
|
|
SRAT: lapic cpu_index=1f, node_id=03, apic_id=2f
|
|
set_srat_mem: dev DOMAIN: 0000, res->index=0007 startk=00000000, sizek=00300000
|
|
set_srat_mem: dev DOMAIN: 0000, res->index=0012 startk=00000000, sizek=00000280
|
|
set_srat_mem: dev DOMAIN: 0000, res->index=0022 startk=00000300, sizek=002ffd00
|
|
set_srat_mem: dev DOMAIN: 0000, res->index=0032 startk=00400000, sizek=00d00000
|
|
ACPI: added table 5/32, length now 56
|
|
ACPI: * SLIT at bffbfcb8
|
|
ACPI: added table 6/32, length now 60
|
|
ACPI: * SRAT at bffbfd00
|
|
SRAT: lapic cpu_index=00, node_id=00, apic_id=00
|
|
SRAT: lapic cpu_index=01, node_id=00, apic_id=01
|
|
SRAT: lapic cpu_index=02, node_id=00, apic_id=02
|
|
SRAT: lapic cpu_index=03, node_id=00, apic_id=03
|
|
SRAT: lapic cpu_index=04, node_id=00, apic_id=04
|
|
SRAT: lapic cpu_index=05, node_id=00, apic_id=05
|
|
SRAT: lapic cpu_index=06, node_id=00, apic_id=06
|
|
SRAT: lapic cpu_index=07, node_id=00, apic_id=07
|
|
SRAT: lapic cpu_index=08, node_id=01, apic_id=08
|
|
SRAT: lapic cpu_index=09, node_id=01, apic_id=09
|
|
SRAT: lapic cpu_index=0a, node_id=01, apic_id=0a
|
|
SRAT: lapic cpu_index=0b, node_id=01, apic_id=0b
|
|
SRAT: lapic cpu_index=0c, node_id=01, apic_id=0c
|
|
SRAT: lapic cpu_index=0d, node_id=01, apic_id=0d
|
|
SRAT: lapic cpu_index=0e, node_id=01, apic_id=0e
|
|
SRAT: lapic cpu_index=0f, node_id=01, apic_id=0f
|
|
SRAT: lapic cpu_index=10, node_id=02, apic_id=20
|
|
SRAT: lapic cpu_index=11, node_id=02, apic_id=21
|
|
SRAT: lapic cpu_index=12, node_id=02, apic_id=22
|
|
SRAT: lapic cpu_index=13, node_id=02, apic_id=23
|
|
SRAT: lapic cpu_index=14, node_id=02, apic_id=24
|
|
SRAT: lapic cpu_index=15, node_id=02, apic_id=25
|
|
SRAT: lapic cpu_index=16, node_id=02, apic_id=26
|
|
SRAT: lapic cpu_index=17, node_id=02, apic_id=27
|
|
SRAT: lapic cpu_index=18, node_id=03, apic_id=28
|
|
SRAT: lapic cpu_index=19, node_id=03, apic_id=29
|
|
SRAT: lapic cpu_index=1a, node_id=03, apic_id=2a
|
|
SRAT: lapic cpu_index=1b, node_id=03, apic_id=2b
|
|
SRAT: lapic cpu_index=1c, node_id=03, apic_id=2c
|
|
SRAT: lapic cpu_index=1d, node_id=03, apic_id=2d
|
|
SRAT: lapic cpu_index=1e, node_id=03, apic_id=2e
|
|
SRAT: lapic cpu_index=1f, node_id=03, apic_id=2f
|
|
set_srat_mem: dev DOMAIN: 0000, res->index=0007 startk=00000000, sizek=00300000
|
|
set_srat_mem: dev DOMAIN: 0000, res->index=0012 startk=00000000, sizek=00000280
|
|
set_srat_mem: dev DOMAIN: 0000, res->index=0022 startk=00000300, sizek=002ffd00
|
|
set_srat_mem: dev DOMAIN: 0000, res->index=0032 startk=00400000, sizek=00d00000
|
|
ACPI: added table 7/32, length now 64
|
|
ACPI: * SLIT at bffbffa8
|
|
ACPI: added table 8/32, length now 68
|
|
ACPI: * SRAT at bffbfff0
|
|
SRAT: lapic cpu_index=00, node_id=00, apic_id=00
|
|
SRAT: lapic cpu_index=01, node_id=00, apic_id=01
|
|
SRAT: lapic cpu_index=02, node_id=00, apic_id=02
|
|
SRAT: lapic cpu_index=03, node_id=00, apic_id=03
|
|
SRAT: lapic cpu_index=04, node_id=00, apic_id=04
|
|
SRAT: lapic cpu_index=05, node_id=00, apic_id=05
|
|
SRAT: lapic cpu_index=06, node_id=00, apic_id=06
|
|
SRAT: lapic cpu_index=07, node_id=00, apic_id=07
|
|
SRAT: lapic cpu_index=08, node_id=01, apic_id=08
|
|
SRAT: lapic cpu_index=09, node_id=01, apic_id=09
|
|
SRAT: lapic cpu_index=0a, node_id=01, apic_id=0a
|
|
SRAT: lapic cpu_index=0b, node_id=01, apic_id=0b
|
|
SRAT: lapic cpu_index=0c, node_id=01, apic_id=0c
|
|
SRAT: lapic cpu_index=0d, node_id=01, apic_id=0d
|
|
SRAT: lapic cpu_index=0e, node_id=01, apic_id=0e
|
|
SRAT: lapic cpu_index=0f, node_id=01, apic_id=0f
|
|
SRAT: lapic cpu_index=10, node_id=02, apic_id=20
|
|
SRAT: lapic cpu_index=11, node_id=02, apic_id=21
|
|
SRAT: lapic cpu_index=12, node_id=02, apic_id=22
|
|
SRAT: lapic cpu_index=13, node_id=02, apic_id=23
|
|
SRAT: lapic cpu_index=14, node_id=02, apic_id=24
|
|
SRAT: lapic cpu_index=15, node_id=02, apic_id=25
|
|
SRAT: lapic cpu_index=16, node_id=02, apic_id=26
|
|
SRAT: lapic cpu_index=17, node_id=02, apic_id=27
|
|
SRAT: lapic cpu_index=18, node_id=03, apic_id=28
|
|
SRAT: lapic cpu_index=19, node_id=03, apic_id=29
|
|
SRAT: lapic cpu_index=1a, node_id=03, apic_id=2a
|
|
SRAT: lapic cpu_index=1b, node_id=03, apic_id=2b
|
|
SRAT: lapic cpu_index=1c, node_id=03, apic_id=2c
|
|
SRAT: lapic cpu_index=1d, node_id=03, apic_id=2d
|
|
SRAT: lapic cpu_index=1e, node_id=03, apic_id=2e
|
|
SRAT: lapic cpu_index=1f, node_id=03, apic_id=2f
|
|
set_srat_mem: dev DOMAIN: 0000, res->index=0007 startk=00000000, sizek=00300000
|
|
set_srat_mem: dev DOMAIN: 0000, res->index=0012 startk=00000000, sizek=00000280
|
|
set_srat_mem: dev DOMAIN: 0000, res->index=0022 startk=00000300, sizek=002ffd00
|
|
set_srat_mem: dev DOMAIN: 0000, res->index=0032 startk=00400000, sizek=00d00000
|
|
ACPI: added table 9/32, length now 72
|
|
ACPI: * SLIT at bffc0298
|
|
ACPI: added table 10/32, length now 76
|
|
ACPI: * SRAT at bffc02e0
|
|
SRAT: lapic cpu_index=00, node_id=00, apic_id=00
|
|
SRAT: lapic cpu_index=01, node_id=00, apic_id=01
|
|
SRAT: lapic cpu_index=02, node_id=00, apic_id=02
|
|
SRAT: lapic cpu_index=03, node_id=00, apic_id=03
|
|
SRAT: lapic cpu_index=04, node_id=00, apic_id=04
|
|
SRAT: lapic cpu_index=05, node_id=00, apic_id=05
|
|
SRAT: lapic cpu_index=06, node_id=00, apic_id=06
|
|
SRAT: lapic cpu_index=07, node_id=00, apic_id=07
|
|
SRAT: lapic cpu_index=08, node_id=01, apic_id=08
|
|
SRAT: lapic cpu_index=09, node_id=01, apic_id=09
|
|
SRAT: lapic cpu_index=0a, node_id=01, apic_id=0a
|
|
SRAT: lapic cpu_index=0b, node_id=01, apic_id=0b
|
|
SRAT: lapic cpu_index=0c, node_id=01, apic_id=0c
|
|
SRAT: lapic cpu_index=0d, node_id=01, apic_id=0d
|
|
SRAT: lapic cpu_index=0e, node_id=01, apic_id=0e
|
|
SRAT: lapic cpu_index=0f, node_id=01, apic_id=0f
|
|
SRAT: lapic cpu_index=10, node_id=02, apic_id=20
|
|
SRAT: lapic cpu_index=11, node_id=02, apic_id=21
|
|
SRAT: lapic cpu_index=12, node_id=02, apic_id=22
|
|
SRAT: lapic cpu_index=13, node_id=02, apic_id=23
|
|
SRAT: lapic cpu_index=14, node_id=02, apic_id=24
|
|
SRAT: lapic cpu_index=15, node_id=02, apic_id=25
|
|
SRAT: lapic cpu_index=16, node_id=02, apic_id=26
|
|
SRAT: lapic cpu_index=17, node_id=02, apic_id=27
|
|
SRAT: lapic cpu_index=18, node_id=03, apic_id=28
|
|
SRAT: lapic cpu_index=19, node_id=03, apic_id=29
|
|
SRAT: lapic cpu_index=1a, node_id=03, apic_id=2a
|
|
SRAT: lapic cpu_index=1b, node_id=03, apic_id=2b
|
|
SRAT: lapic cpu_index=1c, node_id=03, apic_id=2c
|
|
SRAT: lapic cpu_index=1d, node_id=03, apic_id=2d
|
|
SRAT: lapic cpu_index=1e, node_id=03, apic_id=2e
|
|
SRAT: lapic cpu_index=1f, node_id=03, apic_id=2f
|
|
set_srat_mem: dev DOMAIN: 0000, res->index=0007 startk=00000000, sizek=00300000
|
|
set_srat_mem: dev DOMAIN: 0000, res->index=0012 startk=00000000, sizek=00000280
|
|
set_srat_mem: dev DOMAIN: 0000, res->index=0022 startk=00000300, sizek=002ffd00
|
|
set_srat_mem: dev DOMAIN: 0000, res->index=0032 startk=00400000, sizek=00d00000
|
|
ACPI: added table 11/32, length now 80
|
|
ACPI: * SLIT at bffc0588
|
|
ACPI: added table 12/32, length now 84
|
|
ACPI: * IVRS at bffc05d0
|
|
ACPI: added table 13/32, length now 88
|
|
ACPI: * HPET
|
|
ACPI: added table 14/32, length now 92
|
|
ACPI: * SPMI at bffc06c0
|
|
ACPI: added table 15/32, length now 96
|
|
ACPI: done.
|
|
ACPI tables: 26384 bytes.
|
|
smbios_write_tables: bffb9000
|
|
SMBIOS firmware version is set to coreboot_version: 'gnuboot-0.1-rc3'
|
|
DOMAIN: 0000 (AMD Family 10h/15h Root Complex)
|
|
SMBIOS tables: 624 bytes.
|
|
Writing table forward entry at 0x00000500
|
|
Wrote coreboot table at: 00000500, 0x10 bytes, checksum 3fe0
|
|
Writing coreboot table at 0xbffe0000
|
|
0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES
|
|
1. 0000000000001000-000000000009ffff: RAM
|
|
2. 00000000000a0000-00000000000bffff: RESERVED
|
|
3. 00000000000c0000-0000000000dfffff: RAM
|
|
4. 0000000000e00000-0000000000f18fff: RAMSTAGE
|
|
5. 0000000000f19000-00000000bffb8fff: RAM
|
|
6. 00000000bffb9000-00000000bfffffff: CONFIGURATION TABLES
|
|
7. 00000000c0000000-00000000cfffffff: RESERVED
|
|
8. 00000000fcb00000-00000000fcb03fff: RESERVED
|
|
9. 00000000feb00000-00000000feb00fff: RESERVED
|
|
10. 00000000fec00000-00000000fec00fff: RESERVED
|
|
11. 00000000fed00000-00000000fed00fff: RESERVED
|
|
12. 00000000fed40000-00000000fed44fff: RESERVED
|
|
13. 0000000100000000-000000043fffffff: RAM
|
|
Manufacturer: ef
|
|
SF: Detected W25Q16_V with sector size 0x1000, total 0x200000
|
|
FMAP: area COREBOOT found @ 200 (2096640 bytes)
|
|
CBFS: 'COREBOOT Locator' located CBFS at [200:200000)
|
|
Wrote coreboot table at: bffe0000, 0x328 bytes, checksum de71
|
|
coreboot table: 832 bytes.
|
|
IMD ROOT 0. bffff000 00001000
|
|
IMD SMALL 1. bfffe000 00001000
|
|
CAR GLOBALS 2. bfff3000 0000a600
|
|
TIME STAMP 3. bfff2000 00000910
|
|
AMDMEM INFO 4. bffe8000 000093fc
|
|
COREBOOT 5. bffe0000 00008000
|
|
IRQ TABLE 6. bffdf000 00001000
|
|
SMP TABLE 7. bffde000 00001000
|
|
ACPI 8. bffba000 00024000
|
|
SMBIOS 9. bffb9000 00000800
|
|
IMD small region:
|
|
IMD ROOT 0. bfffec00 00000400
|
|
FMAP 1. bfffeb40 000000b6
|
|
ROMSTAGE 2. bfffeb20 00000004
|
|
GDT 3. bfffe920 00000200
|
|
BS: BS_WRITE_TABLES times (ms): entry 0 run 1229 exit 0
|
|
FMAP: area COREBOOT found @ 200 (2096640 bytes)
|
|
CBFS: 'COREBOOT Locator' located CBFS at [200:200000)
|
|
CBFS: Locating 'fallback/payload'
|
|
CBFS: Found @ offset 495c0 size 11ca3
|
|
Checking segment from ROM address 0xffe497f8
|
|
Checking segment from ROM address 0xffe49814
|
|
Loading segment from ROM address 0xffe497f8
|
|
code (compression=1)
|
|
New segment dstaddr 0x000ddf00 memsize 0x22100 srcaddr 0xffe49830 filesize 0x11c6b
|
|
Loading Segment: addr: 0x000ddf00 memsz: 0x0000000000022100 filesz: 0x0000000000011c6b
|
|
using LZMA
|
|
Loading segment from ROM address 0xffe49814
|
|
Entry Point 0x000fd26b
|
|
BS: BS_PAYLOAD_LOAD times (ms): entry 0 run 62 exit 0
|
|
Jumping to boot code at 000fd26b(bffe0000)
|
|
SeaBIOS (version rel-1.16.3-0-ga6ed6b7)
|
|
BUILD: gcc: (coreboot toolchain v8f42fd8 2024-03-04) 8.3.0 binutils: (GNU Binutils) 2.32
|
|
Found mainboard ASUS KGPE-D16
|
|
Relocating init from 0x000df640 to 0xbefaba60 (size 54528)
|
|
Found CBFS header at 0xffe00238
|
|
multiboot: eax=e313c0, ebx=e31374
|
|
Found 50 PCI devices (max PCI bus is 08)
|
|
Copying SMBIOS from 0xbffb9000 to 0x000f5a80
|
|
Copying ACPI RSDP from 0xbffba000 to 0x000f5a50
|
|
Skipping MPTABLE copy due to large size (1196 bytes)
|
|
Copying PIR from 0xbffdf000 to 0x000f5a20
|
|
table(50434146)=0xbffbc930 (via xsdt)
|
|
Using pmtimer, ioport 0x820
|
|
Scan for VGA option rom
|
|
Running option rom at c000:0003
|
|
Start SeaVGABIOS (version rel-1.16.3-0-ga6ed6b7)
|
|
VGABUILD: gcc: (coreboot toolchain v8f42fd8 2024-03-04) 8.3.0 binutils: (GNU Binutils) 2.32
|
|
enter vga_post:
|
|
a=00000000 b=0000ffff c=00000000 d=0000ffff ds=0000 es=f000 ss=0000
|
|
si=00000000 di=00006620 bp=00000000 sp=00006db2 cs=f000 ip=d041 f=0000
|
|
coreboot vga init
|
|
Did not find coreboot framebuffer - assuming EGA text
|
|
Attempting to allocate 512 bytes lowmem via pmm call to f000:d0bf
|
|
pmm call arg1=0
|
|
VGA stack allocated at ec080
|
|
Hooking hardware timer irq (old=f000fea5 new=c0003f1d)
|
|
Turning on vga text mode console
|
|
set VGA mode 3
|
|
SeaBIOS (version rel-1.16.3-0-ga6ed6b7)
|
|
EHCI init on dev 00:12.2 (regs=0xfcb0e020)
|
|
EHCI init on dev 00:13.2 (regs=0xfcb0f020)
|
|
OHCI init on dev 00:12.0 (regs=0xfcb08000)
|
|
OHCI init on dev 00:12.1 (regs=0xfcb09000)
|
|
OHCI init on dev 00:13.0 (regs=0xfcb0a000)
|
|
OHCI init on dev 00:13.1 (regs=0xfcb0b000)
|
|
OHCI init on dev 00:14.5 (regs=0xfcb0c000)
|
|
ATA controller 1 at 4020/4040/0 (irq 0 dev 88)
|
|
ATA controller 2 at 4028/4044/0 (irq 0 dev 88)
|
|
ATA controller 3 at 1f0/3f4/0 (irq 14 dev a1)
|
|
ATA controller 4 at 170/374/0 (irq 15 dev a1)
|
|
Searching bootorder for: HALT
|
|
Found 0 lpt ports
|
|
Found 2 serial ports
|
|
Searching bootorder for: /rom@img/memtest
|
|
ata0-0: Samsung SSD 870 QVO 2TB ATA-11 Hard-Disk (1863 GiBytes)
|
|
Searching bootorder for: /pci@i0cf8/*@11/drive@0/disk@0
|
|
Searching bios-geometry for: /pci@i0cf8/*@11/drive@0/disk@0
|
|
PS2 keyboard initialized
|
|
All threads complete.
|
|
Scan for option roms
|
|
|
|
Press ESC for boot menu.
|
|
|
|
Searching bootorder for: HALT
|
|
drive 0x000f5960: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=3907029168
|
|
Space available for UMB: c7800-ec000, f52a0-f5960
|
|
Returned 16777216 bytes of ZoneHigh
|
|
e820 map has 11 items:
|
|
0: 0000000000000000 - 000000000009fc00 = 1 RAM
|
|
1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
|
|
2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
|
|
3: 0000000000100000 - 00000000bffb9000 = 1 RAM
|
|
4: 00000000bffb9000 - 00000000d0000000 = 2 RESERVED
|
|
5: 00000000fcb00000 - 00000000fcb04000 = 2 RESERVED
|
|
6: 00000000feb00000 - 00000000feb01000 = 2 RESERVED
|
|
7: 00000000fec00000 - 00000000fec01000 = 2 RESERVED
|
|
8: 00000000fed00000 - 00000000fed01000 = 2 RESERVED
|
|
9: 00000000fed40000 - 00000000fed45000 = 2 RESERVED
|
|
10: 0000000100000000 - 0000000440000000 = 1 RAM
|
|
enter handle_19:
|
|
NULL
|
|
Booting from Hard Disk...
|
|
Booting from 0000:7c00
|
|
[ 0.000000] Linux version 4.9.0-13-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.228-1 (2020-07-05)
|
|
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-13-amd64 root=UUID=b33a061e-9deb-46da-8507-45e5a6f62667 ro libata.force=noncq nohz=on console=ttyS1,115200n8 iomem=relaxed
|
|
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
|
|
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
|
|
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
|
|
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
|
|
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
|
|
[ 0.000000] e820: BIOS-provided physical RAM map:
|
|
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
|
|
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
|
|
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
|
|
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffb8fff] usable
|
|
[ 0.000000] BIOS-e820: [mem 0x00000000bffb9000-0x00000000cfffffff] reserved
|
|
[ 0.000000] BIOS-e820: [mem 0x00000000fcb00000-0x00000000fcb03fff] reserved
|
|
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb00fff] reserved
|
|
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
|
|
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
|
|
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
|
|
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043fffffff] usable
|
|
[ 0.000000] NX (Execute Disable) protection: active
|
|
[ 0.000000] SMBIOS 2.8 present.
|
|
[ 0.000000] Kernel/User page tables isolation: disabled
|
|
[ 0.000000] AGP: No AGP bridge found
|
|
[ 0.000000] e820: last_pfn = 0x440000 max_arch_pfn = 0x400000000
|
|
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
|
|
[ 0.000000] e820: last_pfn = 0xbffb9 max_arch_pfn = 0x400000000
|
|
[ 0.000000] Using GB pages for direct mapping
|
|
[ 0.000000] RAMDISK: [mem 0x35d43000-0x36e98fff]
|
|
[ 0.000000] ACPI: Early table checksum verification disabled
|
|
[ 0.000000] ACPI: RSDP 0x00000000000F5A50 000024 (v02 COREv4)
|
|
[ 0.000000] ACPI: XSDT 0x00000000BFFBA0E0 00009C (v01 COREv4 COREBOOT 00000000 CORE 20190703)
|
|
[ 0.000000] ACPI: FACP 0x00000000BFFBC930 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20190703)
|
|
[ 0.000000] ACPI: DSDT 0x00000000BFFBA280 0026A7 (v02 COREv4 COREBOOT 00000001 INTL 20190703)
|
|
[ 0.000000] ACPI: FACS 0x00000000BFFBA240 000040
|
|
[ 0.000000] ACPI: FACS 0x00000000BFFBA240 000040
|
|
[ 0.000000] ACPI: SSDT 0x00000000BFFBCA30 002E35 (v02 COREv4 COREBOOT 0000002A CORE 20190703)
|
|
[ 0.000000] ACPI: MCFG 0x00000000BFFBF870 00003C (v01 COREv4 COREBOOT 00000000 CORE 20190703)
|
|
[ 0.000000] ACPI: APIC 0x00000000BFFBF8B0 00015E (v02 COREv4 COREBOOT 00000000 CORE 20190703)
|
|
[ 0.000000] ACPI: SRAT 0x00000000BFFBFA10 0002A8 (v01 COREv4 COREBOOT 00000000 CORE 20190703)
|
|
[ 0.000000] ACPI: SLIT 0x00000000BFFBFCB8 00003C (v01 COREv4 COREBOOT 00000000 CORE 20190703)
|
|
[ 0.000000] ACPI: SRAT 0x00000000BFFBFD00 0002A8 (v01 COREv4 COREBOOT 00000000 CORE 20190703)
|
|
[ 0.000000] ACPI: SLIT 0x00000000BFFBFFA8 00003C (v01 COREv4 COREBOOT 00000000 CORE 20190703)
|
|
[ 0.000000] ACPI: SRAT 0x00000000BFFBFFF0 0002A8 (v01 COREv4 COREBOOT 00000000 CORE 20190703)
|
|
[ 0.000000] ACPI: SLIT 0x00000000BFFC0298 00003C (v01 COREv4 COREBOOT 00000000 CORE 20190703)
|
|
[ 0.000000] ACPI: SRAT 0x00000000BFFC02E0 0002A8 (v01 COREv4 COREBOOT 00000000 CORE 20190703)
|
|
[ 0.000000] ACPI: SLIT 0x00000000BFFC0588 00003C (v01 COREv4 COREBOOT 00000000 CORE 20190703)
|
|
[ 0.000000] ACPI: IVRS 0x00000000BFFC05D0 0000AC (v01 COREv4 COREBOOT 00000000 CORE 20190703)
|
|
[ 0.000000] ACPI: HPET 0x00000000BFFC0680 000038 (v01 COREv4 COREBOOT 00000000 CORE 20190703)
|
|
[ 0.000000] ACPI: SPMI 0x00000000BFFC06C0 000041 (v05 COREv4 COREBOOT 00000000 CORE 20190703)
|
|
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
|
|
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
|
|
[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
|
|
[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
|
|
[ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0
|
|
[ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0
|
|
[ 0.000000] SRAT: PXM 0 -> APIC 0x06 -> Node 0
|
|
[ 0.000000] SRAT: PXM 0 -> APIC 0x07 -> Node 0
|
|
[ 0.000000] SRAT: PXM 1 -> APIC 0x08 -> Node 1
|
|
[ 0.000000] SRAT: PXM 1 -> APIC 0x09 -> Node 1
|
|
[ 0.000000] SRAT: PXM 1 -> APIC 0x0a -> Node 1
|
|
[ 0.000000] SRAT: PXM 1 -> APIC 0x0b -> Node 1
|
|
[ 0.000000] SRAT: PXM 1 -> APIC 0x0c -> Node 1
|
|
[ 0.000000] SRAT: PXM 1 -> APIC 0x0d -> Node 1
|
|
[ 0.000000] SRAT: PXM 1 -> APIC 0x0e -> Node 1
|
|
[ 0.000000] SRAT: PXM 1 -> APIC 0x0f -> Node 1
|
|
[ 0.000000] SRAT: PXM 2 -> APIC 0x20 -> Node 2
|
|
[ 0.000000] SRAT: PXM 2 -> APIC 0x21 -> Node 2
|
|
[ 0.000000] SRAT: PXM 2 -> APIC 0x22 -> Node 2
|
|
[ 0.000000] SRAT: PXM 2 -> APIC 0x23 -> Node 2
|
|
[ 0.000000] SRAT: PXM 2 -> APIC 0x24 -> Node 2
|
|
[ 0.000000] SRAT: PXM 2 -> APIC 0x25 -> Node 2
|
|
[ 0.000000] SRAT: PXM 2 -> APIC 0x26 -> Node 2
|
|
[ 0.000000] SRAT: PXM 2 -> APIC 0x27 -> Node 2
|
|
[ 0.000000] SRAT: PXM 3 -> APIC 0x28 -> Node 3
|
|
[ 0.000000] SRAT: PXM 3 -> APIC 0x29 -> Node 3
|
|
[ 0.000000] SRAT: PXM 3 -> APIC 0x2a -> Node 3
|
|
[ 0.000000] SRAT: PXM 3 -> APIC 0x2b -> Node 3
|
|
[ 0.000000] SRAT: PXM 3 -> APIC 0x2c -> Node 3
|
|
[ 0.000000] SRAT: PXM 3 -> APIC 0x2d -> Node 3
|
|
[ 0.000000] SRAT: PXM 3 -> APIC 0x2e -> Node 3
|
|
[ 0.000000] SRAT: PXM 3 -> APIC 0x2f -> Node 3
|
|
[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
|
|
[ 0.000000] ACPI: SRAT: Node 2 PXM 2 [mem 0x00100000-0xbfffffff]
|
|
[ 0.000000] ACPI: SRAT: Node 2 PXM 2 [mem 0x100000000-0x43fffffff]
|
|
[ 0.000000] NUMA: Node 2 [mem 0x00100000-0xbfffffff] + [mem 0x100000000-0x43fffffff] -> [mem 0x00100000-0x43fffffff]
|
|
[ 0.000000] NODE_DATA(2) allocated [mem 0x43fffa000-0x43fffefff]
|
|
[ 0.000000] node 0 must be removed before remove section 135
|
|
[ 0.000000] Zone ranges:
|
|
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
|
|
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
|
|
[ 0.000000] Normal [mem 0x0000000100000000-0x000000043fffffff]
|
|
[ 0.000000] Device empty
|
|
[ 0.000000] Movable zone start for each node
|
|
[ 0.000000] Early memory node ranges
|
|
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
|
|
[ 0.000000] node 2: [mem 0x0000000000100000-0x00000000bffb8fff]
|
|
[ 0.000000] node 2: [mem 0x0000000100000000-0x000000043fffffff]
|
|
[ 0.000000] Initmem setup node 2 [mem 0x0000000000100000-0x000000043fffffff]
|
|
[ 0.000000] ACPI: PM-Timer IO Port: 0x820
|
|
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
|
|
[ 0.000000] IOAPIC[0]: apic_id 32, version 33, address 0xfec00000, GSI 0-23
|
|
[ 0.000000] IOAPIC[1]: apic_id 33, version 33, address 0xfcc00000, GSI 24-55
|
|
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
|
|
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
|
|
[ 0.000000] Using ACPI (MADT) for SMP configuration information
|
|
[ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000
|
|
[ 0.000000] smpboot: Allowing 32 CPUs, 0 hotplug CPUs
|
|
[ 0.000000] NODE_DATA(0) allocated [mem 0x00093000-0x00097fff]
|
|
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000000009efff]
|
|
[ 0.000000] NODE_DATA(1) allocated [mem 0x43fff3000-0x43fff7fff]
|
|
[ 0.000000] NODE_DATA(1) on node 2
|
|
[ 0.000000] Initmem setup node 1 [mem 0x0000000000000000-0x0000000000000000]
|
|
[ 0.000000] NODE_DATA(3) allocated [mem 0x43ffee000-0x43fff2fff]
|
|
[ 0.000000] NODE_DATA(3) on node 2
|
|
[ 0.000000] Initmem setup node 3 [mem 0x0000000000000000-0x0000000000000000]
|
|
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
|
|
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
|
|
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
|
|
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
|
|
[ 0.000000] PM: Registered nosave memory: [mem 0xbffb9000-0xcfffffff]
|
|
[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xfcafffff]
|
|
[ 0.000000] PM: Registered nosave memory: [mem 0xfcb00000-0xfcb03fff]
|
|
[ 0.000000] PM: Registered nosave memory: [mem 0xfcb04000-0xfeafffff]
|
|
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb00fff]
|
|
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb01000-0xfebfffff]
|
|
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
|
|
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
|
|
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
|
|
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
|
|
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
|
|
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xffffffff]
|
|
[ 0.000000] e820: [mem 0xd0000000-0xfcafffff] available for PCI devices
|
|
[ 0.000000] Booting paravirtualized kernel on bare hardware
|
|
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
|
|
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:32 nr_node_ids:4
|
|
[ 0.000000] percpu: Embedded 35 pages/cpu s105304 r8192 d29864 u262144
|
|
[ 0.000000] Built 4 zonelists in Node order, mobility grouping on. Total pages: 4128559
|
|
[ 0.000000] Policy zone: Normal
|
|
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-13-amd64 root=UUID=b33a061e-9deb-46da-8507-45e5a6f62667 ro libata.force=noncq nohz=on console=ttyS1,115200n8 iomem=relaxed
|
|
[ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
|
|
[ 0.000000] log_buf_len total cpu_extra contributions: 126976 bytes
|
|
[ 0.000000] log_buf_len min size: 131072 bytes
|
|
[ 0.000000] log_buf_len: 262144 bytes
|
|
[ 0.000000] early log buf free: 118756(90%)
|
|
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
|
|
[ 0.000000] AGP: Checking aperture...
|
|
[ 0.000000] AGP: No AGP bridge found
|
|
[ 0.000000] AGP: Node 0: aperture [bus addr 0xf8000000-0xfbffffff] (64MB)
|
|
[ 0.000000] AGP: Node 1: aperture [bus addr 0xf8000000-0xfbffffff] (64MB)
|
|
[ 0.000000] AGP: Node 2: aperture [bus addr 0xf8000000-0xfbffffff] (64MB)
|
|
[ 0.000000] AGP: Node 3: aperture [bus addr 0xf8000000-0xfbffffff] (64MB)
|
|
[ 0.000000] Memory: 16410100K/16776540K available (6291K kernel code, 1162K rwdata, 2876K rodata, 1428K init, 664K bss, 366440K reserved, 0K cma-reserved)
|
|
[ 0.000000] Hierarchical RCU implementation.
|
|
[ 0.000000] Build-time adjustment of leaf fanout to 64.
|
|
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=32.
|
|
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=32
|
|
[ 0.000000] NR_IRQS:33024 nr_irqs:1224 16
|
|
[ 0.000000] Console: colour VGA+ 80x25
|
|
[ 0.000000] console [ttyS1] enabled
|
|
[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
|
|
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
|
|
[ 0.000000] tsc: Fast TSC calibration using PIT
|
|
[ 0.000000] tsc: Detected 2400.112 MHz processor
|
|
[ 0.000038] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.22 BogoMIPS (lpj=9600448)
|
|
[ 0.010669] pid_max: default: 32768 minimum: 301
|
|
[ 0.015381] ACPI: Core revision 20160831
|
|
[ 0.023149] ACPI: 2 ACPI AML tables successfully acquired and loaded
|
|
[ 0.029811] Security Framework initialized
|
|
[ 0.033913] Yama: disabled by default; enable with sysctl kernel.yama.*
|
|
[ 0.040532] AppArmor: AppArmor disabled by boot time parameter
|
|
[ 0.047661] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
|
|
[ 0.062834] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
|
|
[ 0.073637] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
|
|
[ 0.080538] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
|
|
[ 0.088668] mce: CPU supports 7 MCE banks
|
|
[ 0.092703] LVT offset 1 assigned for vector 0xf9
|
|
[ 0.097418] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
|
|
[ 0.103338] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
|
|
[ 0.109952] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
|
|
[ 0.118471] Spectre V2 : Mitigation: Full AMD retpoline
|
|
[ 0.123695] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
|
|
[ 0.131955] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
|
|
[ 0.148347] Freeing SMP alternatives memory: 24K
|
|
[ 0.154821] ftrace: allocating 25361 entries in 100 pages
|
|
[ 0.181303] smpboot: Max logical packages: 2
|
|
[ 0.266324] Switched APIC routing to physical flat.
|
|
[ 0.271812] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
|
|
[ 0.425520] smpboot: CPU0: AMD Opteron(tm) Processor 6278 (family: 0x15, model: 0x1, stepping: 0x2)
|
|
[ 0.434615] Performance Events: Fam15h core perfctr, AMD PMU driver.
|
|
[ 0.441017] ... version: 0
|
|
[ 0.445030] ... bit width: 48
|
|
[ 0.449128] ... generic registers: 6
|
|
[ 0.453133] ... value mask: 0000ffffffffffff
|
|
[ 0.458445] ... max period: 00007fffffffffff
|
|
[ 0.463750] ... fixed-purpose events: 0
|
|
[ 0.467763] ... event mask: 000000000000003f
|
|
[ 0.474726] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
|
|
[ 0.483220] x86: Booting SMP configuration:
|
|
[ 0.487402] .... node #0, CPUs: #1[ 0.495497] do_IRQ: 1.55 No irq handler for vector
|
|
[ 0.500977] #2[ 0.505796] do_IRQ: 2.55 No irq handler for vector
|
|
[ 0.511144] #3[ 0.515957] do_IRQ: 3.55 No irq handler for vector
|
|
[ 0.521271] #4[ 0.526093] do_IRQ: 4.55 No irq handler for vector
|
|
[ 0.531395] #5[ 0.536213] do_IRQ: 5.55 No irq handler for vector
|
|
[ 0.541508] #6[ 0.546332] do_IRQ: 6.55 No irq handler for vector
|
|
[ 0.551633] #7[ 0.556448] do_IRQ: 7.55 No irq handler for vector
|
|
[ 0.561657] .... node #1, CPUs: #8[ 0.568399] do_IRQ: 8.55 No irq handler for vector
|
|
[ 0.573693] #9[ 0.578509] do_IRQ: 9.55 No irq handler for vector
|
|
[ 0.583701] #10[ 0.588521] do_IRQ: 10.55 No irq handler for vector
|
|
[ 0.593807] #11 #12 #13 #14 #15
|
|
[ 0.614830] .... node #2, CPUs: #16 #17 #18 #19 #20 #21 #22 #23
|
|
[ 0.745059] .... node #3, CPUs: #24 #25 #26 #27 #28 #29 #30 #31[ 0.779331] x86: Booted up 4 nodes, 32 CPUs
|
|
[ 0.783528] smpboot: Total of 32 processors activated (153608.20 BogoMIPS)
|
|
[ 0.866815] devtmpfs: initialized
|
|
[ 0.870292] x86/mm: Memory block size: 128MB
|
|
[ 0.881132] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
|
|
[ 0.890942] futex hash table entries: 8192 (order: 7, 524288 bytes)
|
|
[ 0.897642] pinctrl core: initialized pinctrl subsystem
|
|
[ 0.904251] NET: Registered protocol family 16
|
|
[ 0.921507] cpuidle: using governor ladder
|
|
[ 0.941506] cpuidle: using governor menu
|
|
[ 0.945598] ACPI: bus type PCI registered
|
|
[ 0.949606] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
|
|
[ 0.956228] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xc0000000-0xc1ffffff] (base 0xc0000000)
|
|
[ 0.965527] PCI: MMCONFIG at [mem 0xc0000000-0xc1ffffff] reserved in E820
|
|
[ 0.972326] PCI: Using configuration type 1 for base access
|
|
[ 0.997707] HugeTLB registered 1 GB page size, pre-allocated 0 pages
|
|
[ 1.004070] HugeTLB registered 2 MB page size, pre-allocated 0 pages
|
|
[ 1.011477] ACPI: Added _OSI(Module Device)
|
|
[ 1.015662] ACPI: Added _OSI(Processor Device)
|
|
[ 1.020104] ACPI: Added _OSI(3.0 _SCP Extensions)
|
|
[ 1.024809] ACPI: Added _OSI(Processor Aggregator Device)
|
|
[ 1.030403] ACPI: Executed 2 blocks of module-level executable AML code
|
|
[ 1.041279] ACPI: Interpreter enabled
|
|
[ 1.044962] ACPI: (supports S0 S1 S4 S5)
|
|
[ 1.048885] ACPI: Using IOAPIC for interrupt routing
|
|
[ 1.053928] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
|
|
[ 1.068136] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 12 14 15) *0, disabled.
|
|
[ 1.076047] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 12 14 15) *0, disabled.
|
|
[ 1.083976] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 12 14 15) *0, disabled.
|
|
[ 1.091895] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 12 14 15) *0, disabled.
|
|
[ 1.099805] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
|
|
[ 1.107719] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
|
|
[ 1.115631] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 12 14 15) *0, disabled.
|
|
[ 1.123534] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
|
|
[ 1.140469] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-08])
|
|
[ 1.146657] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
|
|
[ 1.154857] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
|
|
[ 1.171888] acpi PNP0A08:00: host bridge window expanded to [io 0x0000-0x0cf7 window]; [io 0x0000-0x0cf7 window] ignored
|
|
[ 1.183105] PCI host bridge to bus 0000:00
|
|
[ 1.187202] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
|
|
[ 1.193991] pci_bus 0000:00: root bus resource [io 0x0d00-0x4fff window]
|
|
[ 1.200773] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
|
|
[ 1.208253] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfcbfffff window]
|
|
[ 1.215732] pci_bus 0000:00: root bus resource [mem 0xfcc00000-0xfccfffff window]
|
|
[ 1.223212] pci_bus 0000:00: root bus resource [bus 00-08]
|
|
[ 1.229060] pci 0000:00:02.0: System wakeup disabled by ACPI
|
|
[ 1.234862] pci 0000:00:04.0: System wakeup disabled by ACPI
|
|
[ 1.240667] pci 0000:00:09.0: System wakeup disabled by ACPI
|
|
[ 1.246466] pci 0000:00:0a.0: System wakeup disabled by ACPI
|
|
[ 1.252260] pci 0000:00:0b.0: System wakeup disabled by ACPI
|
|
[ 1.258059] pci 0000:00:0c.0: System wakeup disabled by ACPI
|
|
[ 1.263857] pci 0000:00:0d.0: System wakeup disabled by ACPI
|
|
[ 1.269666] pci 0000:00:11.0: set SATA to AHCI mode
|
|
[ 1.274605] pci 0000:00:11.0: System wakeup disabled by ACPI
|
|
[ 1.280432] pci 0000:00:12.0: System wakeup disabled by ACPI
|
|
[ 1.286253] pci 0000:00:12.1: System wakeup disabled by ACPI
|
|
[ 1.292115] pci 0000:00:12.2: System wakeup disabled by ACPI
|
|
[ 1.297951] pci 0000:00:13.0: System wakeup disabled by ACPI
|
|
[ 1.303777] pci 0000:00:13.1: System wakeup disabled by ACPI
|
|
[ 1.309643] pci 0000:00:13.2: System wakeup disabled by ACPI
|
|
[ 1.315600] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
|
|
[ 1.322737] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
|
|
[ 1.329261] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
|
|
[ 1.336393] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
|
|
[ 1.342968] pci 0000:00:14.1: System wakeup disabled by ACPI
|
|
[ 1.349092] pci 0000:00:14.4: System wakeup disabled by ACPI
|
|
[ 1.354915] pci 0000:00:14.5: System wakeup disabled by ACPI
|
|
[ 1.362856] pci 0000:00:02.0: PCI bridge to [bus 01]
|
|
[ 1.367873] pci 0000:00:04.0: PCI bridge to [bus 02]
|
|
[ 1.384634] pci 0000:00:09.0: PCI bridge to [bus 03]
|
|
[ 1.404631] pci 0000:00:0a.0: PCI bridge to [bus 04]
|
|
[ 1.409658] pci 0000:00:0b.0: PCI bridge to [bus 05]
|
|
[ 1.414678] pci 0000:00:0c.0: PCI bridge to [bus 06]
|
|
[ 1.419695] pci 0000:00:0d.0: PCI bridge to [bus 07]
|
|
[ 1.425156] pci 0000:00:14.4: PCI bridge to [bus 08] (subtractive decode)
|
|
[ 1.432557] ACPI: Enabled 4 GPEs in block 00 to 1F
|
|
[ 1.437659] vgaarb: setting as boot device: PCI:0000:08:01.0
|
|
[ 1.443317] vgaarb: device added: PCI:0000:08:01.0,decodes=io+mem,owns=io+mem,locks=none
|
|
[ 1.451406] vgaarb: loaded
|
|
[ 1.454117] vgaarb: bridge control possible 0000:08:01.0
|
|
[ 1.459668] PCI: Using ACPI for IRQ routing
|
|
[ 1.465193] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
|
|
[ 1.470426] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
|
|
[ 1.478460] clocksource: Switched to clocksource hpet
|
|
[ 1.493476] VFS: Disk quotas dquot_6.6.0
|
|
[ 1.497488] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
|
|
[ 1.504508] pnp: PnP ACPI init
|
|
[ 1.508100] pnp: PnP ACPI: found 4 devices
|
|
[ 1.520846] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
|
|
[ 1.529880] pci 0000:00:02.0: BAR 14: no space for [mem size 0x00200000]
|
|
[ 1.536583] pci 0000:00:02.0: BAR 14: failed to assign [mem size 0x00200000]
|
|
[ 1.543631] pci 0000:00:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
|
|
[ 1.551289] pci 0000:00:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
|
|
[ 1.559290] pci 0000:00:04.0: BAR 14: no space for [mem size 0x00200000]
|
|
[ 1.565986] pci 0000:00:04.0: BAR 14: failed to assign [mem size 0x00200000]
|
|
[ 1.573036] pci 0000:00:04.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
|
|
[ 1.580695] pci 0000:00:04.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
|
|
[ 1.588695] pci 0000:00:09.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
|
|
[ 1.596353] pci 0000:00:09.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
|
|
[ 1.604358] pci 0000:00:0a.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
|
|
[ 1.612014] pci 0000:00:0a.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
|
|
[ 1.620015] pci 0000:00:0b.0: BAR 14: no space for [mem size 0x00200000]
|
|
[ 1.626713] pci 0000:00:0b.0: BAR 14: failed to assign [mem size 0x00200000]
|
|
[ 1.633760] pci 0000:00:0b.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
|
|
[ 1.641411] pci 0000:00:0b.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
|
|
[ 1.649411] pci 0000:00:0c.0: BAR 14: no space for [mem size 0x00200000]
|
|
[ 1.656107] pci 0000:00:0c.0: BAR 14: failed to assign [mem size 0x00200000]
|
|
[ 1.663157] pci 0000:00:0c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
|
|
[ 1.670816] pci 0000:00:0c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
|
|
[ 1.678816] pci 0000:00:0d.0: BAR 14: no space for [mem size 0x00200000]
|
|
[ 1.685514] pci 0000:00:0d.0: BAR 14: failed to assign [mem size 0x00200000]
|
|
[ 1.692561] pci 0000:00:0d.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
|
|
[ 1.700212] pci 0000:00:0d.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
|
|
[ 1.708213] pci 0000:00:02.0: BAR 13: no space for [io size 0x1000]
|
|
[ 1.714572] pci 0000:00:02.0: BAR 13: failed to assign [io size 0x1000]
|
|
[ 1.721271] pci 0000:00:04.0: BAR 13: no space for [io size 0x1000]
|
|
[ 1.727622] pci 0000:00:04.0: BAR 13: failed to assign [io size 0x1000]
|
|
[ 1.734324] pci 0000:00:0b.0: BAR 13: no space for [io size 0x1000]
|
|
[ 1.740674] pci 0000:00:0b.0: BAR 13: failed to assign [io size 0x1000]
|
|
[ 1.747374] pci 0000:00:0c.0: BAR 13: no space for [io size 0x1000]
|
|
[ 1.753727] pci 0000:00:0c.0: BAR 13: failed to assign [io size 0x1000]
|
|
[ 1.760426] pci 0000:00:0d.0: BAR 13: no space for [io size 0x1000]
|
|
[ 1.766779] pci 0000:00:0d.0: BAR 13: failed to assign [io size 0x1000]
|
|
[ 1.773482] pci 0000:00:0d.0: BAR 14: no space for [mem size 0x00200000]
|
|
[ 1.780186] pci 0000:00:0d.0: BAR 14: failed to assign [mem size 0x00200000]
|
|
[ 1.787233] pci 0000:00:0d.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
|
|
[ 1.794892] pci 0000:00:0d.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
|
|
[ 1.802891] pci 0000:00:0d.0: BAR 13: no space for [io size 0x1000]
|
|
[ 1.809243] pci 0000:00:0d.0: BAR 13: failed to assign [io size 0x1000]
|
|
[ 1.815943] pci 0000:00:0c.0: BAR 14: no space for [mem size 0x00200000]
|
|
[ 1.822642] pci 0000:00:0c.0: BAR 14: failed to assign [mem size 0x00200000]
|
|
[ 1.829689] pci 0000:00:0c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
|
|
[ 1.837339] pci 0000:00:0c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
|
|
[ 1.845339] pci 0000:00:0c.0: BAR 13: no space for [io size 0x1000]
|
|
[ 1.851692] pci 0000:00:0c.0: BAR 13: failed to assign [io size 0x1000]
|
|
[ 1.858392] pci 0000:00:0b.0: BAR 14: no space for [mem size 0x00200000]
|
|
[ 1.865091] pci 0000:00:0b.0: BAR 14: failed to assign [mem size 0x00200000]
|
|
[ 1.872137] pci 0000:00:0b.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
|
|
[ 1.879788] pci 0000:00:0b.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
|
|
[ 1.887788] pci 0000:00:0b.0: BAR 13: no space for [io size 0x1000]
|
|
[ 1.894138] pci 0000:00:0b.0: BAR 13: failed to assign [io size 0x1000]
|
|
[ 1.900842] pci 0000:00:0a.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
|
|
[ 1.908500] pci 0000:00:0a.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
|
|
[ 1.916501] pci 0000:00:09.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
|
|
[ 1.924158] pci 0000:00:09.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
|
|
[ 1.932161] pci 0000:00:04.0: BAR 14: no space for [mem size 0x00200000]
|
|
[ 1.938867] pci 0000:00:04.0: BAR 14: failed to assign [mem size 0x00200000]
|
|
[ 1.945916] pci 0000:00:04.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
|
|
[ 1.953572] pci 0000:00:04.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
|
|
[ 1.961574] pci 0000:00:04.0: BAR 13: no space for [io size 0x1000]
|
|
[ 1.967933] pci 0000:00:04.0: BAR 13: failed to assign [io size 0x1000]
|
|
[ 1.974633] pci 0000:00:02.0: BAR 14: no space for [mem size 0x00200000]
|
|
[ 1.981331] pci 0000:00:02.0: BAR 14: failed to assign [mem size 0x00200000]
|
|
[ 1.988379] pci 0000:00:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
|
|
[ 1.996030] pci 0000:00:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
|
|
[ 2.004030] pci 0000:00:02.0: BAR 13: no space for [io size 0x1000]
|
|
[ 2.010380] pci 0000:00:02.0: BAR 13: failed to assign [io size 0x1000]
|
|
[ 2.017081] pci 0000:00:02.0: PCI bridge to [bus 01]
|
|
[ 2.022051] pci 0000:00:04.0: PCI bridge to [bus 02]
|
|
[ 2.027024] pci 0000:00:09.0: PCI bridge to [bus 03]
|
|
[ 2.031996] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
|
|
[ 2.038090] pci 0000:00:09.0: bridge window [mem 0xfc900000-0xfc9fffff]
|
|
[ 2.044885] pci 0000:00:0a.0: PCI bridge to [bus 04]
|
|
[ 2.049856] pci 0000:00:0a.0: bridge window [io 0x2000-0x2fff]
|
|
[ 2.055950] pci 0000:00:0a.0: bridge window [mem 0xfca00000-0xfcafffff]
|
|
[ 2.062737] pci 0000:00:0b.0: PCI bridge to [bus 05]
|
|
[ 2.067714] pci 0000:00:0c.0: PCI bridge to [bus 06]
|
|
[ 2.072686] pci 0000:00:0d.0: PCI bridge to [bus 07]
|
|
[ 2.077662] pci 0000:00:14.4: PCI bridge to [bus 08]
|
|
[ 2.082632] pci 0000:00:14.4: bridge window [io 0x3000-0x3fff]
|
|
[ 2.088727] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfc8fffff]
|
|
[ 2.095875] NET: Registered protocol family 2
|
|
[ 2.100846] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
|
|
[ 2.108689] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
|
|
[ 2.115719] TCP: Hash tables configured (established 131072 bind 65536)
|
|
[ 2.122409] UDP hash table entries: 8192 (order: 6, 262144 bytes)
|
|
[ 2.128609] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
|
|
[ 2.135397] NET: Registered protocol family 1
|
|
[ 2.141052] pci 0000:08:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
|
|
[ 2.149485] Unpacking initramfs...
|
|
[ 2.528713] Freeing initrd memory: 17752K
|
|
[ 2.534269] iommu: Adding device 0000:00:11.0 to group 0
|
|
[ 2.540046] iommu: Adding device 0000:00:12.0 to group 1
|
|
[ 2.545389] iommu: Adding device 0000:00:12.1 to group 1
|
|
[ 2.550727] iommu: Adding device 0000:00:12.2 to group 1
|
|
[ 2.556484] iommu: Adding device 0000:00:13.0 to group 2
|
|
[ 2.561819] iommu: Adding device 0000:00:13.1 to group 2
|
|
[ 2.567160] iommu: Adding device 0000:00:13.2 to group 2
|
|
[ 2.572881] iommu: Adding device 0000:00:14.0 to group 3
|
|
[ 2.578607] iommu: Adding device 0000:00:14.1 to group 4
|
|
[ 2.584329] iommu: Adding device 0000:00:14.2 to group 5
|
|
[ 2.590057] iommu: Adding device 0000:00:14.3 to group 6
|
|
[ 2.595783] iommu: Adding device 0000:00:14.4 to group 7
|
|
[ 2.601509] iommu: Adding device 0000:00:14.5 to group 8
|
|
[ 2.607253] iommu: Adding device 0000:03:00.0 to group 9
|
|
[ 2.612987] iommu: Adding device 0000:04:00.0 to group 10
|
|
[ 2.618403] iommu: Adding device 0000:08:01.0 to group 7
|
|
[ 2.623729] iommu: Adding device 0000:08:02.0 to group 7
|
|
[ 2.742028] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
|
|
[ 2.747341] AMD-Vi: Interrupt remapping enabled
|
|
[ 2.752066] AMD-Vi: Lazy IO/TLB flushing enabled
|
|
[ 2.759111] perf: AMD NB counters detected
|
|
[ 2.764674] LVT offset 0 assigned for vector 0x400
|
|
[ 2.770163] perf: AMD IBS detected (0x000000ff)
|
|
[ 2.776213] audit: initializing netlink subsys (disabled)
|
|
[ 2.781649] audit: type=2000 audit(1721223468.544:1): initialized
|
|
[ 2.788518] workingset: timestamp_bits=40 max_order=22 bucket_order=0
|
|
[ 2.795658] zbud: loaded
|
|
[ 2.800209] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
|
|
[ 2.807760] io scheduler noop registered
|
|
[ 2.811694] io scheduler deadline registered
|
|
[ 2.816032] io scheduler cfq registered (default)
|
|
[ 2.821499] pcieport 0000:00:04.0: can't derive routing for PCI INT A
|
|
[ 2.827943] pcieport 0000:00:04.0: PCI INT A: no GSI
|
|
[ 2.834528] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
|
|
[ 2.841522] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
|
|
[ 2.848512] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
|
|
[ 2.855473] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
|
|
[ 2.862020] pcieport 0000:00:0a.0: Signaling PME through PCIe PME interrupt
|
|
[ 2.868984] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
|
|
[ 2.875530] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
|
|
[ 2.882521] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
|
|
[ 2.889504] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
|
|
[ 2.896487] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
|
|
[ 2.902076] pciehp 0000:00:02.0:pcie004: Slot #2 AttnBtn+ PwrCtrl+ MRL- AttnInd+ PwrInd+ HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
|
|
[ 3.782380] tsc: Refined TSC clocksource calibration: 2400.028 MHz
|
|
[ 3.788591] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2298520eaa9, max_idle_ns: 440795297870 ns
|
|
[ 3.942346] pciehp 0000:00:02.0:pcie004: Timeout on hotplug command 0x13f1 (issued 1028 msec ago)
|
|
[ 4.806635] clocksource: Switched to clocksource tsc
|
|
[ 4.966305] pciehp 0000:00:02.0:pcie004: Timeout on hotplug command 0x17f1 (issued 1016 msec ago)
|
|
[ 4.975186] pciehp 0000:00:04.0:pcie004: Slot #4 AttnBtn+ PwrCtrl+ MRL- AttnInd+ PwrInd+ HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
|
|
[ 5.990316] pciehp 0000:00:04.0:pcie004: Timeout on hotplug command 0x13f1 (issued 1004 msec ago)
|
|
[ 7.014264] pciehp 0000:00:04.0:pcie004: Timeout on hotplug command 0x17f1 (issued 1016 msec ago)
|
|
[ 7.023142] pciehp 0000:00:09.0:pcie004: Slot #9 AttnBtn+ PwrCtrl+ MRL- AttnInd+ PwrInd+ HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
|
|
[ 7.035575] pciehp 0000:00:0a.0:pcie004: Slot #10 AttnBtn+ PwrCtrl+ MRL- AttnInd+ PwrInd+ HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
|
|
[ 7.048097] pciehp 0000:00:0b.0:pcie004: Slot #11 AttnBtn+ PwrCtrl+ MRL- AttnInd+ PwrInd+ HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
|
|
[ 8.070227] pciehp 0000:00:0b.0:pcie004: Timeout on hotplug command 0x13f1 (issued 1012 msec ago)
|
|
[ 9.094194] pciehp 0000:00:0b.0:pcie004: Timeout on hotplug command 0x17f1 (issued 1016 msec ago)
|
|
[ 9.103079] pciehp 0000:00:0c.0:pcie004: Slot #12 AttnBtn+ PwrCtrl+ MRL- AttnInd+ PwrInd+ HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
|
|
[ 10.118159] pciehp 0000:00:0c.0:pcie004: Timeout on hotplug command 0x13f1 (issued 1004 msec ago)
|
|
[ 11.142118] pciehp 0000:00:0c.0:pcie004: Timeout on hotplug command 0x17f1 (issued 1016 msec ago)
|
|
[ 11.150996] pciehp 0000:00:0d.0:pcie004: Slot #13 AttnBtn+ PwrCtrl+ MRL- AttnInd+ PwrInd+ HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
|
|
[ 12.166091] pciehp 0000:00:0d.0:pcie004: Timeout on hotplug command 0x13f1 (issued 1004 msec ago)
|
|
[ 13.190023] pciehp 0000:00:0d.0:pcie004: Timeout on hotplug command 0x17f1 (issued 1016 msec ago)
|
|
[ 13.198901] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
|
|
[ 13.206963] GHES: HEST is not enabled!
|
|
[ 13.210859] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
|
|
[ 13.237749] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
|
|
[ 13.265679] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
|
|
[ 13.273599] Linux agpgart interface v0.103
|
|
[ 13.277803] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
|
|
[ 13.283809] AMD IOMMUv2 functionality not available on this system
|
|
[ 13.295075] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
|
|
[ 13.301862] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
|
|
[ 13.312636] serio: i8042 KBD port at 0x60,0x64 irq 1
|
|
[ 13.317788] mousedev: PS/2 mouse device common for all mice
|
|
[ 13.323416] rtc_cmos 00:00: RTC can wake from S4
|
|
[ 13.328188] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
|
|
[ 13.334314] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
|
|
[ 13.341910] ledtrig-cpu: registered to indicate activity on CPUs
|
|
[ 13.348140] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending.
|
|
[ 13.356237] NET: Registered protocol family 10
|
|
[ 13.361152] mip6: Mobile IPv6
|
|
[ 13.364125] NET: Registered protocol family 17
|
|
[ 13.368570] mpls_gso: MPLS GSO support
|
|
[ 13.374936] microcode: CPU0: patch_level=0x00000000
|
|
[ 13.379822] microcode: CPU1: patch_level=0x00000000
|
|
[ 13.384703] microcode: CPU2: patch_level=0x00000000
|
|
[ 13.389589] microcode: CPU3: patch_level=0x00000000
|
|
[ 13.394480] microcode: CPU4: patch_level=0x00000000
|
|
[ 13.399366] microcode: CPU5: patch_level=0x00000000
|
|
[ 13.404258] microcode: CPU6: patch_level=0x00000000
|
|
[ 13.409142] microcode: CPU7: patch_level=0x00000000
|
|
[ 13.414027] microcode: CPU8: patch_level=0x00000000
|
|
[ 13.418911] microcode: CPU9: patch_level=0x00000000
|
|
[ 13.423800] microcode: CPU10: patch_level=0x00000000
|
|
[ 13.428770] microcode: CPU11: patch_level=0x00000000
|
|
[ 13.433747] microcode: CPU12: patch_level=0x00000000
|
|
[ 13.438720] microcode: CPU13: patch_level=0x00000000
|
|
[ 13.443696] microcode: CPU14: patch_level=0x00000000
|
|
[ 13.448667] microcode: CPU15: patch_level=0x00000000
|
|
[ 13.453637] microcode: CPU16: patch_level=0x00000000
|
|
[ 13.458609] microcode: CPU17: patch_level=0x00000000
|
|
[ 13.463584] microcode: CPU18: patch_level=0x00000000
|
|
[ 13.468557] microcode: CPU19: patch_level=0x00000000
|
|
[ 13.473524] microcode: CPU20: patch_level=0x00000000
|
|
[ 13.478499] microcode: CPU21: patch_level=0x00000000
|
|
[ 13.483474] microcode: CPU22: patch_level=0x00000000
|
|
[ 13.488447] microcode: CPU23: patch_level=0x00000000
|
|
[ 13.493425] microcode: CPU24: patch_level=0x00000000
|
|
[ 13.498397] microcode: CPU25: patch_level=0x00000000
|
|
[ 13.503372] microcode: CPU26: patch_level=0x00000000
|
|
[ 13.508345] microcode: CPU27: patch_level=0x00000000
|
|
[ 13.513325] microcode: CPU28: patch_level=0x00000000
|
|
[ 13.518303] microcode: CPU29: patch_level=0x00000000
|
|
[ 13.523283] microcode: CPU30: patch_level=0x00000000
|
|
[ 13.528269] microcode: CPU31: patch_level=0x00000000
|
|
[ 13.533302] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
|
|
[ 13.542307] registered taskstats version 1
|
|
[ 13.546483] zswap: loaded using pool lzo/zbud
|
|
[ 13.551209] ima: No TPM chip found, activating TPM-bypass!
|
|
[ 13.556698] ima: Allocated hash algorithm: sha256
|
|
[ 13.562055] rtc_cmos 00:00: setting system clock to 2024-07-17 13:38:01 UTC (1721223481)
|
|
[ 13.753058] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
|
|
[ 13.952867] Freeing unused kernel memory: 1428K
|
|
[ 13.957416] Write protecting the kernel read-only data: 12288k
|
|
[ 13.965427] Freeing unused kernel memory: 1884K
|
|
[ 13.973349] Freeing unused kernel memory: 1220K
|
|
[ 13.985366] x86/mm: Checked W+X mappings: passed, no W+X pages found.
|
|
Loading, please wait...
|
|
starting version[ 14.014337] random: systemd-udevd: uninitialized urandom read (16 bytes read)
|
|
232
|
|
[ 14.015695] random: udevadm: uninitialized urandom read (16 bytes read)
|
|
[ 14.015738] random: udevadm: uninitialized urandom read (16 bytes read)
|
|
[ 14.071157] pps_core: LinuxPPS API ver. 1 registered
|
|
[ 14.076139] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
|
|
[ 14.087041] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
|
|
[ 14.094614] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
|
|
[ 14.102224] PTP clock support registered
|
|
[ 14.116263] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
|
|
[ 14.122136] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
|
|
[ 14.128258] AVX version of gcm_enc/dec engaged.
|
|
[ 14.128496] e1000e 0000:03:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
|
|
[ 14.142165] AES CTR mode by8 optimization enabled
|
|
[ 14.147133] ACPI: bus type USB registered
|
|
[ 14.151207] usbcore: registered new interface driver usbfs
|
|
[ 14.156757] usbcore: registered new interface driver hub
|
|
[ 14.162253] usbcore: registered new device driver usb
|
|
[ 14.167971] SCSI subsystem initialized
|
|
[ 14.173437] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
|
|
[ 14.181114] ehci-pci: EHCI PCI platform driver
|
|
[ 14.184876] e1000e 0000:03:00.0 0000:03:00.0 (uninitialized): registered PHC clock
|
|
[ 14.193585] ehci-pci 0000:00:12.2: EHCI Host Controller
|
|
[ 14.198859] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
|
|
[ 14.206273] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
|
|
[ 14.214980] ehci-pci 0000:00:12.2: debug port 1
|
|
[ 14.219607] ehci-pci 0000:00:12.2: irq 17, io mem 0xfcb0e000
|
|
[ 14.225450] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
|
|
[ 14.230025] firewire_ohci 0000:08:02.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
|
|
[ 14.237978] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
|
|
[ 14.238090] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
|
|
[ 14.238092] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
|
[ 14.238094] usb usb1: Product: EHCI Host Controller
|
|
[ 14.238095] usb usb1: Manufacturer: Linux 4.9.0-13-amd64 ehci_hcd
|
|
[ 14.238096] usb usb1: SerialNumber: 0000:00:12.2
|
|
[ 14.238408] hub 1-0:1.0: USB hub found
|
|
[ 14.238420] hub 1-0:1.0: 6 ports detected
|
|
[ 14.239033] ehci-pci 0000:00:13.2: EHCI Host Controller
|
|
[ 14.239043] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
|
|
[ 14.239048] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
|
|
[ 14.239062] ehci-pci 0000:00:13.2: debug port 1
|
|
[ 14.239137] ehci-pci 0000:00:13.2: irq 19, io mem 0xfcb0f000
|
|
[ 14.242208] e1000e 0000:03:00.0 eth0: (PCI Express:2.5GT/s:Width x1) bc:ee:7b:00:ef:9f
|
|
[ 14.242210] e1000e 0000:03:00.0 eth0: Intel(R) PRO/1000 Network Connection
|
|
[ 14.242294] e1000e 0000:03:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
|
|
[ 14.242568] e1000e 0000:04:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
|
|
[ 14.257981] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
|
|
[ 14.258064] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
|
|
[ 14.258066] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
|
[ 14.258067] usb usb2: Product: EHCI Host Controller
|
|
[ 14.258068] usb usb2: Manufacturer: Linux 4.9.0-13-amd64 ehci_hcd
|
|
[ 14.258070] usb usb2: SerialNumber: 0000:00:13.2
|
|
[ 14.258344] hub 2-0:1.0: USB hub found
|
|
[ 14.258354] hub 2-0:1.0: 6 ports detected
|
|
[ 14.304117] e1000e 0000:04:00.0 0000:04:00.0 (uninitialized): registered PHC clock
|
|
[ 14.326931] scsi host0: pata_atiixp
|
|
[ 14.327201] scsi host1: pata_atiixp
|
|
[ 14.327336] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x4010 irq 14
|
|
[ 14.327337] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x4018 irq 15
|
|
[ 14.363289] e1000e 0000:04:00.0 eth1: (PCI Express:2.5GT/s:Width x1) bc:ee:7b:00:ed:ab
|
|
[ 14.363291] e1000e 0000:04:00.0 eth1: Intel(R) PRO/1000 Network Connection
|
|
[ 14.363375] e1000e 0000:04:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
|
|
[ 14.384636] e1000e 0000:03:00.0 ens9: renamed from eth0
|
|
[ 14.447553] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
|
|
[ 14.455673] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part ccc
|
|
[ 14.455772] ohci-pci: OHCI PCI platform driver
|
|
[ 14.469774] scsi host2: ahci
|
|
[ 14.472952] scsi host3: ahci
|
|
[ 14.476112] scsi host4: ahci
|
|
[ 14.479273] scsi host5: ahci
|
|
[ 14.482111] e1000e 0000:04:00.0 ens10: renamed from eth1
|
|
[ 14.487685] ata3: SATA max UDMA/133 abar m1024@0xfcb0d000 port 0xfcb0d100 irq 22
|
|
[ 14.495197] ata4: SATA max UDMA/133 abar m1024@0xfcb0d000 port 0xfcb0d180 irq 22
|
|
[ 14.502649] ata5: SATA max UDMA/133 abar m1024@0xfcb0d000 port 0xfcb0d200 irq 22
|
|
[ 14.510085] ata6: SATA max UDMA/133 abar m1024@0xfcb0d000 port 0xfcb0d280 irq 22
|
|
[ 14.517738] ohci-pci 0000:00:12.0: OHCI PCI host controller
|
|
[ 14.523338] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
|
|
[ 14.530793] ohci-pci 0000:00:12.0: irq 16, io mem 0xfcb08000
|
|
[ 14.598052] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
|
|
[ 14.604835] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
|
[ 14.612056] usb usb3: Product: OHCI PCI host controller
|
|
[ 14.617279] usb usb3: Manufacturer: Linux 4.9.0-13-amd64 ohci_hcd
|
|
[ 14.623371] usb usb3: SerialNumber: 0000:00:12.0
|
|
[ 14.628284] hub 3-0:1.0: USB hub found
|
|
[ 14.632052] hub 3-0:1.0: 3 ports detected
|
|
[ 14.636480] ohci-pci 0000:00:12.1: OHCI PCI host controller
|
|
[ 14.642060] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
|
|
[ 14.649480] ohci-pci 0000:00:12.1: irq 16, io mem 0xfcb09000
|
|
[ 14.718022] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
|
|
[ 14.724803] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
|
[ 14.732021] usb usb4: Product: OHCI PCI host controller
|
|
[ 14.737246] usb usb4: Manufacturer: Linux 4.9.0-13-amd64 ohci_hcd
|
|
[ 14.743341] usb usb4: SerialNumber: 0000:00:12.1
|
|
[ 14.748236] hub 4-0:1.0: USB hub found
|
|
[ 14.752000] hub 4-0:1.0: 3 ports detected
|
|
[ 14.756447] ohci-pci 0000:00:13.0: OHCI PCI host controller
|
|
[ 14.762035] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
|
|
[ 14.769487] ohci-pci 0000:00:13.0: irq 18, io mem 0xfcb0a000
|
|
[ 14.775287] firewire_core 0000:08:02.0: created device fw0: GUID 001e8c0000e564c9, S400
|
|
[ 14.832230] ata4: SATA link down (SStatus 0 SControl 300)
|
|
[ 14.837690] ata5: SATA link down (SStatus 0 SControl 300)
|
|
[ 14.838056] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
|
|
[ 14.838058] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
|
[ 14.838059] usb usb5: Product: OHCI PCI host controller
|
|
[ 14.838061] usb usb5: Manufacturer: Linux 4.9.0-13-amd64 ohci_hcd
|
|
[ 14.838062] usb usb5: SerialNumber: 0000:00:13.0
|
|
[ 14.838347] hub 5-0:1.0: USB hub found
|
|
[ 14.838362] hub 5-0:1.0: 3 ports detected
|
|
[ 14.838771] ohci-pci 0000:00:13.1: OHCI PCI host controller
|
|
[ 14.838781] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
|
|
[ 14.838815] ohci-pci 0000:00:13.1: irq 18, io mem 0xfcb0b000
|
|
[ 14.899738] ata6: SATA link down (SStatus 0 SControl 300)
|
|
[ 14.902042] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
|
|
[ 14.902044] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
|
[ 14.902045] usb usb6: Product: OHCI PCI host controller
|
|
[ 14.902047] usb usb6: Manufacturer: Linux 4.9.0-13-amd64 ohci_hcd
|
|
[ 14.902048] usb usb6: SerialNumber: 0000:00:13.1
|
|
[ 14.902336] hub 6-0:1.0: USB hub found
|
|
[ 14.902351] hub 6-0:1.0: 3 ports detected
|
|
[ 14.902755] ohci-pci 0000:00:14.5: OHCI PCI host controller
|
|
[ 14.902766] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
|
|
[ 14.902805] ohci-pci 0000:00:14.5: irq 18, io mem 0xfcb0c000
|
|
[ 14.966013] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
|
|
[ 14.972803] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
|
[ 14.980020] usb usb7: Product: OHCI PCI host controller
|
|
[ 14.985244] usb usb7: Manufacturer: Linux 4.9.0-13-amd64 ohci_hcd
|
|
[ 14.991339] usb usb7: SerialNumber: 0000:00:14.5
|
|
[ 14.996238] hub 7-0:1.0: USB hub found
|
|
[ 15.000000] hub 7-0:1.0: 2 ports detected
|
|
Begin: Loading essential drivers ... done.
|
|
Begin: Running /scripts/init-premount ... done.
|
|
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
|
|
Begin: Running /scripts/local-premount ... Begin: Waiting for suspend/resume device ... [ 15.117994] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
|
|
[ 15.127344] ata3.00: FORCE: horkage modified (noncq)
|
|
[ 15.132363] ata3.00: supports DRM functions and may not be fully accessible
|
|
[ 15.139326] ata3.00: ATA-11: Samsung SSD 870 QVO 2TB, SVQ02B6Q, max UDMA/133
|
|
[ 15.146379] ata3.00: 3907029168 sectors, multi 1: LBA48 NCQ (not used)
|
|
[ 15.153723] ata3.00: supports DRM functions and may not be fully accessible
|
|
[ 15.161169] ata3.00: configured for UDMA/133
|
|
[ 15.166004] scsi 2:0:0:0: Direct-Access ATA Samsung SSD 870 2B6Q PQ: 0 ANSI: 5
|
|
[ 15.208219] ata3.00: Enabling discard_zeroes_data
|
|
[ 15.212976] sd 2:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
|
|
[ 15.220861] sd 2:0:0:0: [sda] Write Protect is off
|
|
[ 15.225675] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
|
|
[ 15.234986] ata3.00: Enabling discard_zeroes_data
|
|
[ 15.243294] sda: sda1 sda2 < sda5 >
|
|
[ 15.247343] ata3.00: Enabling discard_zeroes_data
|
|
[ 15.252189] sd 2:0:0:0: [sda] Attached SCSI disk
|
|
Begin: Running /scripts/local-block ... done.
|
|
done.
|
|
[ 16.030508] PM: Starting manual resume from disk
|
|
done.
|
|
Begin: Will now check root file system ... fsck from util-linux 2.29.2
|
|
[/sbin/fsck.ext4 (1) -- /dev/sda1] fsck.ext4 -a -C0 /dev/sda1
|
|
/dev/sda1: recovering journal
|
|
[ 16.179599] random: fast init done
|
|
/dev/sda1: clean, 901190/121585664 files, 13551496/486314240 blocks
|
|
done.
|
|
[ 16.281130] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
|
|
done.
|
|
Begin: Running /scripts/local-bottom ... done.
|
|
Begin: Running /scripts/init-bottom ... done.
|
|
[ 16.399919] ip_tables: (C) 2000-2006 Netfilter Core Team
|
|
[ 16.419042] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
|
|
[ 16.438065] systemd[1]: Detected architecture x86-64.
|
|
|
|
Welcome to [1mDebian GNU/Linux 9 (stretch) [0m!
|
|
|
|
[ 16.458175] systemd[1]: Set hostname to <lab-kgpe-d16>.
|
|
[ 16.537447] systemd[1]: Listening on Journal Socket.
|
|
[ [0;32m OK [0m] Listening on Journal Socket.
|
|
[ 16.558173] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
|
|
[ [0;32m OK [0m] Set up automount Arbitrary Executab…rmats File System Automount Point.
|
|
[ 16.585945] systemd[1]: Listening on udev Kernel Socket.
|
|
[ [0;32m OK [0m] Listening on udev Kernel Socket.
|
|
[ 16.605916] systemd[1]: Reached target Remote File Systems.
|
|
[ [0;32m OK [0m] Reached target Remote File Systems.
|
|
[ 16.625933] systemd[1]: Listening on Syslog Socket.
|
|
[ [0;32m OK [0m] Listening on Syslog Socket.
|
|
[ 16.645991] systemd[1]: Listening on Journal Audit Socket.
|
|
[ [0;32m OK [0m] Listening on Journal Audit Socket.
|
|
[ 16.665944] systemd[1]: Listening on Journal Socket (/dev/log).
|
|
[ [0;32m OK [0m] Listening on Journal Socket (/dev/log).
|
|
[ [0;32m OK [0m] Created slice User and Session Slice.
|
|
[ [0;32m OK [0m] Started Dispatch Password Requests to Console Directory Watch.
|
|
[ [0;32m OK [0m] Listening on udev Control Socket.
|
|
[ [0;32m OK [0m] Created slice System Slice.
|
|
Starting Set the console keyboard layout...
|
|
Starting Load Kernel Modules...
|
|
[ 16.786161] w83627ehf: Found W83667HG-B chip at 0x290
|
|
Mounting POSIX Message Queue File System...
|
|
[ [0;32m OK [0m] Created slice system-getty.slice.
|
|
[ [0;32m OK [0m] Reached target Slices.
|
|
Starting Journal Service...
|
|
[ [0;32m OK [0m] Listening on fsck to fsckd communication Socket.
|
|
Starting Create list of required st…ce nodes for the current kernel...
|
|
[ [0;32m OK [0m] Started Forward Password Requests to Wall Directory Watch.
|
|
[ [0;32m OK [0m] Reached target Paths.
|
|
[ [0;32m OK [0m] Reached target Encrypted Volumes.
|
|
[ [0;32m OK [0m] Listening on /dev/initctl Compatibility Named Pipe.
|
|
Mounting Debug File System...
|
|
[ 16.973901] i2c i2c-1: Found w83795g rev. B at 0x2f
|
|
Starting Remount Root and Kernel File Systems...
|
|
[ 16.984556] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
|
|
Mounting Huge Pages File System...
|
|
[ [0;32m OK [0m] Created slice system-serial\x2dgetty.slice.
|
|
[ [0;32m OK [0m] Mounted Debug File System.
|
|
[ [0;32m OK [0m] Mounted POSIX Message Queue File System.
|
|
[ [0;32m OK [0m] Mounted Huge Pages File System.
|
|
[ [0;32m OK [0m] Started Journal Service.
|
|
[ [0;32m OK [0m] Started Create list of required sta…vice nodes for the current kernel.
|
|
[ [0;32m OK [0m] Started Remount Root and Kernel File Systems.
|
|
Starting Load/Save Random Seed...
|
|
Starting udev Coldplug all Devices...
|
|
Starting Create Static Device Nodes in /dev...
|
|
Starting Flush Journal to Persistent Storage...
|
|
[ [0;32m OK [0m] Started Load Kernel Modules.
|
|
[ [0;32m OK [0m] Started Load/Save Random Seed.
|
|
[ [0;32m OK [0m] Started Create Static Device Nodes in /dev.
|
|
Starting udev Kernel Device Manager...
|
|
Starting Apply Kernel Variables...
|
|
[ [0;32m OK [0m] Started udev Kernel Device Manager.
|
|
[ [0;32m OK [0m] Started udev Coldplug all Devices.
|
|
[ 17.284765] acpi_cpufreq: overriding BIOS provided _PSD data
|
|
[ [0;32m OK [0[ 17.296781] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
|
|
m] Started Apply[ 17.305613] ACPI: Power Button [PWRB]
|
|
Kernel Variable[ 17.311933] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
|
|
s.
|
|
[ 17.312006] ipmi message handler version 39.2
|
|
[ 17.324276] ACPI: Power Button [PWRF]
|
|
[ 17.329647] systemd-journald[518]: Received request to flush runtime journal from PID 1
|
|
[ [0;32m OK [0m] Started Flush Journal to Persistent Storage.
|
|
[ [0;32m OK [0m] Found device /dev/ttyS1.
|
|
[ 17.375150] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
|
|
[ 17.381800] sp5100_tco: PCI Vendor ID: 0x1002, Device ID: 0x4385, Revision ID: 0x3d
|
|
[ 17.389556] sp5100_tco: Using 0xfeb00b00 for watchdog MMIO address
|
|
[ 17.395784] sp5100_tco: Last reboot was triggered by watchdog.
|
|
[ 17.401780] sp5100_tco: initialized (0xffffbd36019c5b00). heartbeat=60 sec (nowayout=0)
|
|
[ 17.401843] ipmi_si IPI0001:00: ipmi_si: probing via ACPI
|
|
[ 17.401927] ipmi_si IPI0001:00: [io 0x0ca2] regsize 1 spacing 1 irq 0
|
|
[ 17.401930] ipmi_si: Adding ACPI-specified kcs state machine
|
|
[ 17.401959] IPMI System Interface driver.
|
|
[ 17.402007] ipmi_si: probing via SPMI
|
|
[ 17.402009] ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
|
|
[ 17.402010] ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
|
|
[ 17.402012] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
|
|
[ 17.460114] input: PC Speaker as /devices/platform/pcspkr/input/input4
|
|
[ 17.469077] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
|
|
[ [0;32m OK [0m] Found device 82574L Gigabit Network Connection (Motherboard).
|
|
[ 17.531644] sd 2:0:0:0: Attached scsi generic sg0 type 0
|
|
[ 17.538379] [drm] Initialized
|
|
[ [0;32m OK [0m] Found device Samsung_SSD_870_QVO_2TB 5.
|
|
Activat[ 17.628773] [drm] Using P2A bridge for configuration
|
|
ing swap /dev/di[ 17.634120] [drm] AST 1100 detected
|
|
sk/by-uuid/d…b[ 17.639019] [drm] Analog VGA only
|
|
8d-2d79-45a8-a4c[ 17.643812] [drm] dram MCLK=200 Mhz type=0 bus_width=16 size=00600000
|
|
7-322e05621c26..[ 17.652058] [TTM] Zone kernel: Available graphics memory: 8249180 kiB
|
|
.
|
|
[ 17.659663] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
|
|
[ 17.666478] [TTM] Initializing pool allocator
|
|
[ 17.670928] [TTM] Initializing DMA pool allocator
|
|
[ 17.693545] Adding 8255484k swap on /dev/sda5. Priority:-1 extents:1 across:8255484k SSFS
|
|
[ [0;32m OK [0m] Activated swap /dev/disk/by-uuid/df48eb8d-2d79-45a8-a4c7-322e05621c26.
|
|
[ [0;32m OK [0m] Reached target Swap.
|
|
[ 17.737893] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed.
|
|
[ 17.801525] fbcon: astdrmfb (fb0) is primary device
|
|
[ 17.827802] ipmi_si IPI0001:00: Error clearing flags: c1
|
|
[ 17.852496] ipmi_si IPI0001:00: Found new BMC (man_id: 0x00a015, prod_id: 0x3146, dev_id: 0x20)
|
|
[ 17.852517] ipmi_si IPI0001:00: IPMI kcs interface initialized
|
|
[ 18.168306] Console: switching to colour frame buffer device 160x64
|
|
[ 18.359704] kvm: Nested Virtualization enabled
|
|
[ 18.359738] kvm: Nested Paging enabled
|
|
[ 18.393219] ast 0000:08:01.0: fb0: astdrmfb frame buffer device
|
|
[ 18.396967] snd_hda_intel 0000:00:14.2: no codecs found!
|
|
[ 18.406895] EDAC MC: Ver: 3.0.0
|
|
[ 18.415701] MCE: In-kernel MCE decoding enabled.
|
|
[ 18.421927] EDAC amd64: DRAM ECC disabled.
|
|
[ 18.421944] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
|
|
[ 18.421944] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
|
|
[ 18.421944] (Note that use of the override may cause unknown side effects.)
|
|
[ 18.585854] [drm] Initialized ast 0.1.0 20120228 for 0000:08:01.0 on minor 0
|
|
[ [0;32m OK [0m] Started Set the console keyboard layout.
|
|
[ [0;32m OK [0m] Reached target Local File Systems (Pre).
|
|
[ 18.839060] EDAC amd64: DRAM ECC disabled.
|
|
[ 18.843311] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
|
|
[ 18.843311] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
|
|
[ 18.843311] (Note that use of the override may cause unknown side effects.)
|
|
[ [0;32m OK [0m] Reached target Local File Systems.
|
|
Starting Set console font and keymap...
|
|
Starting Create Volatile Files and Directories...
|
|
[ [0;32m OK [0m] Started ifup for ens9.
|
|
Starting Raise network interfaces...
|
|
[ 18.962952] EDAC amd64: DRAM ECC disabled.
|
|
[ 18.967169] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
|
|
[ 18.967169] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
|
|
[ 18.967169] (Note that use of the override may cause unknown side effects.)
|
|
[ [0;32m OK [0m] Started Set console font and keymap.
|
|
[ [0;32m OK [0m] Started Create Volatile Files and Directories.
|
|
Starting Update UTMP about System Boot/Shutdown...
|
|
Starting Network Time Synchronization...
|
|
[ 19.057204] IPv6: ADDRCONF(NETDEV_UP): ens9: link is not ready
|
|
[ [0;32m OK [0m] Started Update UTMP about System Boot/Shutdown.
|
|
[ 19.103173] EDAC amd64: DRAM ECC disabled.
|
|
[ 19.107414] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
|
|
[ 19.107414] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
|
|
[ 19.107414] (Note that use of the override may cause unknown side effects.)
|
|
[ [0;32m OK [0m] Started Raise network interfaces.
|
|
[ [0;32m OK [0m] Reached target Network.
|
|
[ 19.210725] EDAC amd64: DRAM ECC disabled.
|
|
[ 19.215004] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
|
|
[ 19.215004] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
|
|
[ 19.215004] (Note that use of the override may cause unknown side effects.)
|
|
[ [0;32m OK [0m] Started Network Time Synchronization.
|
|
[ [0;32m OK [0m] Reached target System Initialization.
|
|
[ [0;32m OK [0m] Started Daily Cleanup of Temporary Directories.
|
|
[ [0;32m OK [0m] Listening on D-Bus System Message Bus Socket.
|
|
[ 19.315302] EDAC amd64: DRAM ECC disabled.
|
|
[ 19.319591] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
|
|
[ 19.319591] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
|
|
[ 19.319591] (Note that use of the override may cause unknown side effects.)
|
|
[ [0;32m OK [0m] Reached target Sockets.
|
|
[ [0;32m OK [0m] Reached target Basic System.
|
|
Starting Initialize hardware monitoring sensors...
|
|
Starting Permit User Sessions...
|
|
[ 19.399371] EDAC amd64: DRAM ECC disabled.
|
|
[ 19.404282] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
|
|
[ 19.404282] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
|
|
[ 19.404282] (Note that use of the override may cause unknown side effects.)
|
|
Starting OpenBSD Secure Shell server...
|
|
[ [0;32m OK [0m] Started Regular background program processing daemon.
|
|
Starting System Logging Service...
|
|
Starting Login Service...
|
|
[ [0;32m OK [0m] Started D-Bus System Message Bus.
|
|
[ [0;32m OK [0m] Reached targ[ 19.527248] EDAC amd64: DRAM ECC disabled.
|
|
et System Time S[ 19.531857] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
|
|
[ 19.531857] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
|
|
[ 19.531857] (Note that use of the override may cause unknown side effects.)
|
|
ynchronized.
|
|
[ [0;32m OK [0m] Started Daily apt download activities.
|
|
[ [0;32m OK [0m] Started Daily apt upgrade and clean activities.
|
|
[ [0;32m OK [0m] Reached target Timers.
|
|
[ 19.619156] EDAC amd64: DRAM ECC disabled.
|
|
[ 19.623422] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
|
|
[ 19.623422] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
|
|
[ 19.623422] (Note that use of the override may cause unknown side effects.)
|
|
[ [0;32m OK [0m] Started System Logging Service.
|
|
[ [0;32m OK [0m] Started Permit User Sessions.
|
|
[ [0;32m OK [0m] Reached target Network is Online.
|
|
Starting Daily apt download activities...
|
|
[ 19.726739] EDAC amd64: DRAM ECC disabled.
|
|
[ 19.730928] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
|
|
[ 19.730928] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
|
|
[ 19.730928] (Note that use of the override may cause unknown side effects.)
|
|
[ [0;32m OK [0m] Started Getty on tty1.
|
|
[ [0;32m OK [0m] Started Serial Getty on ttyS1.
|
|
[ [0;32m OK [0m] Reached target Login Prompts.
|
|
[ [0;32m OK [0m] Started OpenBSD Secure Shell server.
|
|
[ [0;32m OK [0m] Started Login Service.
|
|
[ 19.883498] EDAC amd64: DRAM ECC disabled.
|
|
[ 19.887725] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
|
|
[ 19.887725] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
|
|
[ 19.887725] (Note that use of the override may cause unknown side effects.)
|
|
[ 19.995149] EDAC amd64: DRAM ECC disabled.
|
|
[ 19.999315] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
|
|
[ 19.999315] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
|
|
[ 19.999315] (Note that use of the override may cause unknown side effects.)
|
|
[ 20.079127] EDAC amd64: DRAM ECC disabled.
|
|
[ 20.083307] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
|
|
[ 20.083307] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
|
|
[ 20.083307] (Note that use of the override may cause unknown side effects.)
|
|
[ 20.186992] EDAC amd64: DRAM ECC disabled.
|
|
[ 20.191207] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
|
|
[ 20.191207] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
|
|
[ 20.191207] (Note that use of the override may cause unknown side effects.)
|
|
[ 20.307053] EDAC amd64: DRAM ECC disabled.
|
|
[ 20.311258] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
|
|
[ 20.311258] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
|
|
[ 20.311258] (Note that use of the override may cause unknown side effects.)
|
|
[ 20.337806] w83795 1-002f: Failed to read from register 0x0bb, err -5
|
|
[\00 20.357797] wregister 0x0c7, err -6
|
|
[ 20.422931] EDAC amd64: DRAM ECC disabled.
|
|
[ 20.427175] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
|
|
[ 20.427175] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
|
|
[ 20.427175] (Note that use of the override may cause unknown side effects.)
|
|
[ [0;32m OK [0m] Started Daily apt download activities.
|
|
Starting Daily apt upgrade and clean activities...
|
|
[ 20.571229] EDAC amd64: DRAM ECC disabled.
|
|
[ 20.575494] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
|
|
[ 20.575494] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
|
|
[ 20.575494] (Note that use of the override may cause unknown side effects.)
|
|
[ 20.670512] EDAC amd64: DRAM ECC disabled.
|
|
[ 20.674679] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
|
|
[ 20.674679] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
|
|
[ 20.674679] (Note that use of the override may cause unknown side effects.)
|
|
[ 20.762743] EDAC amd64: DRAM ECC disabled.
|
|
[ 20.767026] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
|
|
[ 20.767026] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
|
|
[ 20.767026] (Note that use of the override may cause unknown side effects.)
|
|
[ 20.883130] EDAC amd64: DRAM ECC disabled.
|
|
[ 20.887410] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
|
|
[ 20.887410] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
|
|
[ 20.887410] (Note that use of the override may cause unknown side effects.)
|
|
[ [0;32m OK [0m] Started Daily apt upgrade an[ 21.027096] EDAC amd64: DRAM ECC disabled.
|
|
d clean activiti[ 21.032025] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
|
|
[ 21.032025] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
|
|
[ 21.032025] (Note that use of the override may cause unknown side effects.)
|
|
es.
|
|
[ 21.135010] EDAC amd64: DRAM ECC disabled.
|
|
[ 21.139250] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
|
|
[ 21.139250] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
|
|
[ 21.139250] (Note that use of the override may cause unknown side effects.)
|
|
[ 21.219043] EDAC amd64: DRAM ECC disabled.
|
|
[ 21.223290] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
|
|
[ 21.223290] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
|
|
[ 21.223290] (Note that use of the override may cause unknown side effects.)
|
|
[ 21.310993] EDAC amd64: DRAM ECC disabled.
|
|
[ 21.315294] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
|
|
[ 21.315294] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
|
|
[ 21.315294] (Note that use of the override may cause unknown side effects.)
|
|
[ 21.414832] EDAC amd64: DRAM ECC disabled.
|
|
[ 21.419100] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
|
|
[ 21.419100] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
|
|
[ 21.419100] (Note that use of the override may cause unknown side effects.)
|
|
[ 21.506955] EDAC amd64: DRAM ECC disabled.
|
|
[ 21.511225] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
|
|
[ 21.511225] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
|
|
[ 21.511225] (Note that use of the override may cause unknown side effects.)
|
|
[ 21.598916] EDAC amd64: DRAM ECC disabled.
|
|
[ 21.603166] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
|
|
[ 21.603166] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
|
|
[ 21.603166] (Note that use of the override may cause unknown side effects.)
|
|
[ [0;32m OK [0m] Started Initialize hardware monitoring sensors.
|
|
[ [0;32m OK [0m] Reached target Multi-User System.
|
|
[ [0;32m OK [0m] Reached target Graphical Interface.
|
|
Starting Update UTMP about System Runlevel Changes...
|
|
[ 21.694907] EDAC amd64: DRAM ECC disabled.
|
|
[ 21.699171] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
|
|
[ 21.699171] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
|
|
[ 21.699171] (Note that use of the override may cause unknown side effects.)
|
|
[ [0;32m OK [0m] Started Update UTMP about System Runlevel Changes.
|
|
[ 22.150496] EDAC amd64: DRAM ECC disabled.
|
|
[ 22.154765] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
|
|
[ 22.154765] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
|
|
[ 22.154765] (Note that use of the override may cause unknown side effects.)
|
|
[ 22.186700] e1000e: ens9 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
|
|
[ 22.194784] IPv6: ADDRCONF(NETDEV_CHANGE): ens9: link becomes ready
|
|
[ 22.218737] EDAC amd64: DRAM ECC disabled.
|
|
[ 22.222944] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
|
|
[ 22.222944] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
|
|
[ 22.222944] (Note that use of the override may cause unknown side effects.)
|
|
[ 22.278671] EDAC amd64: DRAM ECC disabled.
|
|
[ 22.282927] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
|
|
[ 22.282927] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
|
|
[ 22.282927] (Note that use of the override may cause unknown side effects.)
|
|
[ 22.342707] EDAC amd64: DRAM ECC disabled.
|
|
[ 22.346963] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
|
|
[ 22.346963] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
|
|
[ 22.346963] (Note that use of the override may cause unknown side effects.)
|
|
|
|
|
|
Debian GNU/Linux 9 lab-kgpe-d16 ttyS1
|
|
|
|
lab-kgpe-d16 login:
|