coreboot-kgpe-d16/payloads/libpayload/drivers/usb/usbhid.c

520 lines
15 KiB
C
Raw Permalink Normal View History

/*
* This file is part of the libpayload project.
*
* Copyright (C) 2008-2010 coresystems GmbH
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
// #define USB_DEBUG
#include <keycodes.h>
#include <usb/usb.h>
enum { hid_subclass_none = 0, hid_subclass_boot = 1 };
typedef enum { hid_proto_boot = 0, hid_proto_report = 1 } hid_proto;
enum { hid_boot_proto_none = 0, hid_boot_proto_keyboard =
1, hid_boot_proto_mouse = 2
};
static const char *boot_protos[3] = { "(none)", "keyboard", "mouse" };
enum { GET_REPORT = 0x1, GET_IDLE = 0x2, GET_PROTOCOL = 0x3, SET_REPORT =
0x9, SET_IDLE = 0xa, SET_PROTOCOL = 0xb
};
typedef union {
struct {
u8 modifiers;
u8 repeats;
u8 keys[6];
};
u8 buffer[8];
} usb_hid_keyboard_event_t;
typedef struct {
void* queue;
hid_descriptor_t *descriptor;
usb_hid_keyboard_event_t previous;
int lastkeypress;
int repeat_delay;
} usbhid_inst_t;
#define HID_INST(dev) ((usbhid_inst_t*)(dev)->data)
static void
usb_hid_destroy (usbdev_t *dev)
{
if (HID_INST(dev)->queue) {
int i;
for (i = 0; i <= dev->num_endp; i++) {
if (dev->endpoints[i].endpoint == 0)
continue;
if (dev->endpoints[i].type != INTERRUPT)
continue;
if (dev->endpoints[i].direction != IN)
continue;
break;
}
dev->controller->destroy_intr_queue(
&dev->endpoints[i], HID_INST(dev)->queue);
HID_INST(dev)->queue = NULL;
}
free(HID_INST(dev)->descriptor);
HID_INST(dev)->descriptor = NULL;
free (dev->data);
}
/* keybuffer is global to all USB keyboards */
static int keycount;
#define KEYBOARD_BUFFER_SIZE 16
static short keybuffer[KEYBOARD_BUFFER_SIZE];
static int modifiers;
const char *countries[36][2] = {
{ "not supported", "us" },
{ "Arabic", "ae" },
{ "Belgian", "be" },
{ "Canadian-Bilingual", "ca" },
{ "Canadian-French", "ca" },
{ "Czech Republic", "cz" },
{ "Danish", "dk" },
{ "Finnish", "fi" },
{ "French", "fr" },
{ "German", "de" },
{ "Greek", "gr" },
{ "Hebrew", "il" },
{ "Hungary", "hu" },
{ "International (ISO)", "iso" },
{ "Italian", "it" },
{ "Japan (Katakana)", "jp" },
{ "Korean", "us" },
{ "Latin American", "us" },
{ "Netherlands/Dutch", "nl" },
{ "Norwegian", "no" },
{ "Persian (Farsi)", "ir" },
{ "Poland", "pl" },
{ "Portuguese", "pt" },
{ "Russia", "ru" },
{ "Slovakia", "sl" },
{ "Spanish", "es" },
{ "Swedish", "se" },
{ "Swiss/French", "ch" },
{ "Swiss/German", "ch" },
{ "Switzerland", "ch" },
{ "Taiwan", "tw" },
{ "Turkish-Q", "tr" },
{ "UK", "uk" },
{ "US", "us" },
{ "Yugoslavia", "yu" },
{ "Turkish-F", "tr" },
/* 36 - 255: Reserved */
};
struct layout_maps {
const char *country;
const short map[4][0x80];
};
static const struct layout_maps *map;
static const struct layout_maps keyboard_layouts[] = {
// #if CONFIG(LP_PC_KEYBOARD_LAYOUT_US)
{ .country = "us", .map = {
{ /* No modifier */
-1, -1, -1, -1, 'a', 'b', 'c', 'd',
'e', 'f', 'g', 'h', 'i', 'j', 'k', 'l',
/* 0x10 */
'm', 'n', 'o', 'p', 'q', 'r', 's', 't',
'u', 'v', 'w', 'x', 'y', 'z', '1', '2',
/* 0x20 */
'3', '4', '5', '6', '7', '8', '9', '0',
'\n', '\e', '\b', '\t', ' ', '-', '=', '[',
/* 0x30 */
']', '\\', -1, ';', '\'', '`', ',', '.',
'/', -1 /* CapsLk */, KEY_F(1), KEY_F(2), KEY_F(3), KEY_F(4), KEY_F(5), KEY_F(6),
/* 0x40 */
KEY_F(7), KEY_F(8), KEY_F(9), KEY_F(10), KEY_F(11), KEY_F(12), KEY_PRINT, -1 /* ScrLk */,
KEY_BREAK, KEY_IC, KEY_HOME, KEY_PPAGE, KEY_DC, KEY_END, KEY_NPAGE, KEY_RIGHT,
/* 50 */
KEY_LEFT, KEY_DOWN, KEY_UP, -1 /*NumLck*/, '/', '*', '-' /* = ? */, '+',
KEY_ENTER, KEY_END, KEY_DOWN, KEY_NPAGE, KEY_LEFT, -1, KEY_RIGHT, KEY_HOME,
/* 60 */
KEY_UP, KEY_PPAGE, -1, KEY_DC, -1 /* < > | */, -1 /* Win Key Right */, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1,
/* 70 */
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1,
},
{ /* Shift modifier */
-1, -1, -1, -1, 'A', 'B', 'C', 'D',
'E', 'F', 'G', 'H', 'I', 'J', 'K', 'L',
/* 0x10 */
'M', 'N', 'O', 'P', 'Q', 'R', 'S', 'T',
'U', 'V', 'W', 'X', 'Y', 'Z', '!', '@',
/* 0x20 */
'#', '$', '%', '^', '&', '*', '(', ')',
'\n', '\e', '\b', '\t', ' ', '_', '+', '[',
/* 0x30 */
']', '\\', -1, ':', '\'', '`', ',', '.',
'/', -1 /* CapsLk */, KEY_F(1), KEY_F(2), KEY_F(3), KEY_F(4), KEY_F(5), KEY_F(6),
/* 0x40 */
KEY_F(7), KEY_F(8), KEY_F(9), KEY_F(10), KEY_F(11), KEY_F(12), KEY_PRINT, -1 /* ScrLk */,
KEY_BREAK, KEY_IC, KEY_HOME, KEY_PPAGE, KEY_DC, KEY_END, KEY_NPAGE, KEY_RIGHT,
/* 50 */
KEY_LEFT, KEY_DOWN, KEY_UP, -1 /*NumLck*/, '/', '*', '-' /* = ? */, '+',
KEY_ENTER, KEY_END, KEY_DOWN, KEY_NPAGE, KEY_LEFT, -1, KEY_RIGHT, KEY_HOME,
/* 60 */
KEY_UP, KEY_PPAGE, -1, KEY_DC, -1 /* < > | */, -1 /* Win Key Right */, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1,
/* 70 */
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1,
},
{ /* Alt */
-1, -1, -1, -1, 'a', 'b', 'c', 'd',
'e', 'f', 'g', 'h', 'i', 'j', 'k', 'l',
/* 0x10 */
'm', 'n', 'o', 'p', 'q', 'r', 's', 't',
'u', 'v', 'w', 'x', 'y', 'z', '1', '2',
/* 0x20 */
'3', '4', '5', '6', '7', '8', '9', '0',
'\n', '\e', '\b', '\t', ' ', '-', '=', '[',
/* 0x30 */
']', '\\', -1, ';', '\'', '`', ',', '.',
'/', -1 /* CapsLk */, KEY_F(1), KEY_F(2), KEY_F(3), KEY_F(4), KEY_F(5), KEY_F(6),
/* 0x40 */
KEY_F(7), KEY_F(8), KEY_F(9), KEY_F(10), KEY_F(11), KEY_F(12), KEY_PRINT, -1 /* ScrLk */,
KEY_BREAK, KEY_IC, KEY_HOME, KEY_PPAGE, KEY_DC, KEY_END, KEY_NPAGE, KEY_RIGHT,
/* 50 */
KEY_LEFT, KEY_DOWN, KEY_UP, -1 /*NumLck*/, '/', '*', '-' /* = ? */, '+',
KEY_ENTER, KEY_END, KEY_DOWN, KEY_NPAGE, KEY_LEFT, -1, KEY_RIGHT, KEY_HOME,
/* 60 */
KEY_UP, KEY_PPAGE, -1, KEY_DC, -1 /* < > | */, -1 /* Win Key Right */, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1,
/* 70 */
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1,
},
{ /* Shift+Alt modifier */
-1, -1, -1, -1, 'A', 'B', 'C', 'D',
'E', 'F', 'G', 'H', 'I', 'J', 'K', 'L',
/* 0x10 */
'M', 'N', 'O', 'P', 'Q', 'R', 'S', 'T',
'U', 'V', 'W', 'X', 'Y', 'Z', '!', '@',
/* 0x20 */
'#', '$', '%', '^', '&', '*', '(', ')',
'\n', '\e', '\b', '\t', ' ', '-', '=', '[',
/* 0x30 */
']', '\\', -1, ':', '\'', '`', ',', '.',
'/', -1 /* CapsLk */, KEY_F(1), KEY_F(2), KEY_F(3), KEY_F(4), KEY_F(5), KEY_F(6),
/* 0x40 */
KEY_F(7), KEY_F(8), KEY_F(9), KEY_F(10), KEY_F(11), KEY_F(12), KEY_PRINT, -1 /* ScrLk */,
KEY_BREAK, KEY_IC, KEY_HOME, KEY_PPAGE, KEY_DC, KEY_END, KEY_NPAGE, KEY_RIGHT,
/* 50 */
KEY_LEFT, KEY_DOWN, KEY_UP, -1 /*NumLck*/, '/', '*', '-' /* = ? */, '+',
KEY_ENTER, KEY_END, KEY_DOWN, KEY_NPAGE, KEY_LEFT, -1, KEY_RIGHT, KEY_HOME,
/* 60 */
KEY_UP, KEY_PPAGE, -1, KEY_DC, -1 /* < > | */, -1 /* Win Key Right */, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1,
/* 70 */
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1,
}
}},
//#endif
};
static void usb_hid_keyboard_queue(int ch) {
/* ignore key presses if buffer full */
if (keycount < KEYBOARD_BUFFER_SIZE)
keybuffer[keycount++] = ch;
}
#define KEYBOARD_REPEAT_MS 30
#define INITIAL_REPEAT_DELAY 10
#define REPEAT_DELAY 2
static void
usb_hid_process_keyboard_event(usbhid_inst_t *const inst,
const usb_hid_keyboard_event_t *const current)
{
const usb_hid_keyboard_event_t *const previous = &inst->previous;
int i, keypress = 0;
modifiers = 0;
if (current->modifiers & 0x01) /* Left-Ctrl */ modifiers |= KB_MOD_CTRL;
if (current->modifiers & 0x02) /* Left-Shift */ modifiers |= KB_MOD_SHIFT;
if (current->modifiers & 0x04) /* Left-Alt */ modifiers |= KB_MOD_ALT;
if (current->modifiers & 0x08) /* Left-GUI */ ;
if (current->modifiers & 0x10) /* Right-Ctrl */ modifiers |= KB_MOD_CTRL;
if (current->modifiers & 0x20) /* Right-Shift */ modifiers |= KB_MOD_SHIFT;
if (current->modifiers & 0x40) /* Right-AltGr */ modifiers |= KB_MOD_ALT;
if (current->modifiers & 0x80) /* Right-GUI */ ;
if ((current->modifiers & 0x05) && ((current->keys[0] == 0x4c) ||
(current->keys[0]==0x63))) {
/* vulcan nerve pinch */
if (reset_handler)
reset_handler();
}
/* Did the event change at all? */
if (inst->lastkeypress &&
!memcmp(current, previous, sizeof(*current))) {
/* No. Then it's a key repeat event. */
if (inst->repeat_delay) {
inst->repeat_delay--;
} else {
usb_hid_keyboard_queue(inst->lastkeypress);
inst->repeat_delay = REPEAT_DELAY;
}
return;
}
inst->lastkeypress = 0;
for (i=0; i<6; i++) {
int j;
int skip = 0;
// No more keys? skip
if (current->keys[i] == 0)
return;
for (j=0; j<6; j++) {
if (current->keys[i] == previous->keys[j]) {
skip = 1;
break;
}
}
if (skip)
continue;
/* Mask off KB_MOD_CTRL */
keypress = map->map[modifiers & 0x03][current->keys[i]];
if (modifiers & KB_MOD_CTRL) {
switch (keypress) {
case 'a' ... 'z':
keypress &= 0x1f;
break;
default:
continue;
}
}
if (keypress == -1) {
/* Debug: Print unknown keys */
usb_debug ("usbhid: <%x> %x [ %x %x %x %x %x %x ] %d\n",
current->modifiers, current->repeats,
current->keys[0], current->keys[1],
current->keys[2], current->keys[3],
current->keys[4], current->keys[5], i);
/* Unknown key? Try next one in the queue */
continue;
}
usb_hid_keyboard_queue(keypress);
/* Remember for authentic key repeat */
inst->lastkeypress = keypress;
inst->repeat_delay = INITIAL_REPEAT_DELAY;
}
}
static void
usb_hid_poll (usbdev_t *dev)
{
usb_hid_keyboard_event_t current;
const u8 *buf;
while ((buf=dev->controller->poll_intr_queue (HID_INST(dev)->queue))) {
memcpy(&current.buffer, buf, 8);
usb_hid_process_keyboard_event(HID_INST(dev), &current);
HID_INST(dev)->previous = current;
}
}
static void
usb_hid_set_idle (usbdev_t *dev, interface_descriptor_t *interface, u16 duration)
{
dev_req_t dr;
dr.data_dir = host_to_device;
dr.req_type = class_type;
dr.req_recp = iface_recp;
dr.bRequest = SET_IDLE;
dr.wValue = (duration >> 2) << 8;
dr.wIndex = interface->bInterfaceNumber;
dr.wLength = 0;
dev->controller->control (dev, OUT, sizeof (dev_req_t), &dr, 0, 0);
}
static void
usb_hid_set_protocol (usbdev_t *dev, interface_descriptor_t *interface, hid_proto proto)
{
dev_req_t dr;
dr.data_dir = host_to_device;
dr.req_type = class_type;
dr.req_recp = iface_recp;
dr.bRequest = SET_PROTOCOL;
dr.wValue = proto;
dr.wIndex = interface->bInterfaceNumber;
dr.wLength = 0;
dev->controller->control (dev, OUT, sizeof (dev_req_t), &dr, 0, 0);
}
static struct console_input_driver cons = {
.havekey = usbhid_havechar,
.getchar = usbhid_getchar,
.input_type = CONSOLE_INPUT_TYPE_USB,
};
static int usb_hid_set_layout (const char *country)
{
/* FIXME should be per keyboard */
int i;
for (i=0; i<ARRAY_SIZE(keyboard_layouts); i++) {
if (strncmp(keyboard_layouts[i].country, country,
strlen(keyboard_layouts[i].country)))
continue;
/* Found, changing keyboard layout */
map = &keyboard_layouts[i];
usb_debug(" Keyboard layout '%s'\n", map->country);
return 0;
}
usb_debug(" Keyboard layout '%s' not found, using '%s'\n",
country, map->country);
/* Nothing found, not changed */
return -1;
}
void
usb_hid_init (usbdev_t *dev)
{
static int installed = 0;
if (!installed) {
installed = 1;
console_add_input_driver (&cons);
}
configuration_descriptor_t *cd = (configuration_descriptor_t*)dev->configuration;
interface_descriptor_t *interface = (interface_descriptor_t*)(((char *) cd) + cd->bLength);
if (interface->bInterfaceSubClass == hid_subclass_boot) {
u8 countrycode;
usb_debug (" supports boot interface..\n");
usb_debug (" it's a %s\n",
boot_protos[interface->bInterfaceProtocol]);
switch (interface->bInterfaceProtocol) {
case hid_boot_proto_keyboard:
dev->data = xzalloc (sizeof (usbhid_inst_t));
usb_debug (" configuring...\n");
usb_hid_set_protocol(dev, interface, hid_proto_boot);
usb_hid_set_idle(dev, interface, KEYBOARD_REPEAT_MS);
usb_debug (" activating...\n");
libpayload: usb: Refactor USB enumeration to fix SuperSpeed devices This patch represents a major overhaul of the USB enumeration code in order to make it cleaner and much more robust to weird or malicious devices. The main improvement is that it correctly parses the USB descriptors even if there are unknown descriptors interspersed within, which is perfectly legal and in particular present on all SuperSpeed devices (due to the SuperSpeed Endpoint Companion Descriptor). In addition, it gets rid of the really whacky and special cased get_descriptor() function, which would read every descriptor twice whether it made sense or not. The new code makes the callers allocate descriptor memory and only read stuff twice when it's really necessary (i.e. the device and configuration descriptors). Finally, it also moves some more responsibilities into the controller-specific set_address() function in order to make sure things are initialized at the same stage for all controllers. In the new model it initializes the device entry (which zeroes the endpoint array), sets up endpoint 0 (including MPS), sets the device address and finally returns the whole usbdev_t structure with that address correctly set. Note that this should make SuperSpeed devices work, but SuperSpeed hubs are a wholly different story and would require a custom hub driver (since the hub descriptor and port status formats are different for USB 3.0 ports, and the whole issue about the same hub showing up as two different devices on two different ports might present additional challenges). The stack currently just issues a warning and refuses to initialize this part of the hub, which means that 3.0 devices connected through a 3.0 hub may not work correctly. Change-Id: Ie0b82dca23b7a750658ccc1a85f9daae5fbc20e1 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170666 Reviewed-by: Kees Cook <keescook@chromium.org> (cherry picked from commit ecec80e062f7efe32a9a17479dcf8cb678a4a98b) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6780 Tested-by: build bot (Jenkins)
2013-09-18 07:16:04 +02:00
hid_descriptor_t *desc = malloc(sizeof(hid_descriptor_t));
if (!desc || get_descriptor(dev, gen_bmRequestType(
device_to_host, standard_type, iface_recp),
0x21, 0, desc, sizeof(*desc)) != sizeof(*desc)) {
libpayload: usb: Refactor USB enumeration to fix SuperSpeed devices This patch represents a major overhaul of the USB enumeration code in order to make it cleaner and much more robust to weird or malicious devices. The main improvement is that it correctly parses the USB descriptors even if there are unknown descriptors interspersed within, which is perfectly legal and in particular present on all SuperSpeed devices (due to the SuperSpeed Endpoint Companion Descriptor). In addition, it gets rid of the really whacky and special cased get_descriptor() function, which would read every descriptor twice whether it made sense or not. The new code makes the callers allocate descriptor memory and only read stuff twice when it's really necessary (i.e. the device and configuration descriptors). Finally, it also moves some more responsibilities into the controller-specific set_address() function in order to make sure things are initialized at the same stage for all controllers. In the new model it initializes the device entry (which zeroes the endpoint array), sets up endpoint 0 (including MPS), sets the device address and finally returns the whole usbdev_t structure with that address correctly set. Note that this should make SuperSpeed devices work, but SuperSpeed hubs are a wholly different story and would require a custom hub driver (since the hub descriptor and port status formats are different for USB 3.0 ports, and the whole issue about the same hub showing up as two different devices on two different ports might present additional challenges). The stack currently just issues a warning and refuses to initialize this part of the hub, which means that 3.0 devices connected through a 3.0 hub may not work correctly. Change-Id: Ie0b82dca23b7a750658ccc1a85f9daae5fbc20e1 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170666 Reviewed-by: Kees Cook <keescook@chromium.org> (cherry picked from commit ecec80e062f7efe32a9a17479dcf8cb678a4a98b) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6780 Tested-by: build bot (Jenkins)
2013-09-18 07:16:04 +02:00
usb_debug ("get_descriptor(HID) failed\n");
usb_detach_device (dev->controller, dev->address);
return;
}
HID_INST (dev)->descriptor = desc;
countrycode = desc->bCountryCode;
/* 35 countries defined: */
libpayload: usb: Refactor USB enumeration to fix SuperSpeed devices This patch represents a major overhaul of the USB enumeration code in order to make it cleaner and much more robust to weird or malicious devices. The main improvement is that it correctly parses the USB descriptors even if there are unknown descriptors interspersed within, which is perfectly legal and in particular present on all SuperSpeed devices (due to the SuperSpeed Endpoint Companion Descriptor). In addition, it gets rid of the really whacky and special cased get_descriptor() function, which would read every descriptor twice whether it made sense or not. The new code makes the callers allocate descriptor memory and only read stuff twice when it's really necessary (i.e. the device and configuration descriptors). Finally, it also moves some more responsibilities into the controller-specific set_address() function in order to make sure things are initialized at the same stage for all controllers. In the new model it initializes the device entry (which zeroes the endpoint array), sets up endpoint 0 (including MPS), sets the device address and finally returns the whole usbdev_t structure with that address correctly set. Note that this should make SuperSpeed devices work, but SuperSpeed hubs are a wholly different story and would require a custom hub driver (since the hub descriptor and port status formats are different for USB 3.0 ports, and the whole issue about the same hub showing up as two different devices on two different ports might present additional challenges). The stack currently just issues a warning and refuses to initialize this part of the hub, which means that 3.0 devices connected through a 3.0 hub may not work correctly. Change-Id: Ie0b82dca23b7a750658ccc1a85f9daae5fbc20e1 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170666 Reviewed-by: Kees Cook <keescook@chromium.org> (cherry picked from commit ecec80e062f7efe32a9a17479dcf8cb678a4a98b) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6780 Tested-by: build bot (Jenkins)
2013-09-18 07:16:04 +02:00
if (countrycode >= ARRAY_SIZE(countries))
countrycode = 0;
usb_debug (" Keyboard has %s layout (country code %02x)\n",
countries[countrycode][0], countrycode);
/* Set keyboard layout accordingly */
usb_hid_set_layout(countries[countrycode][1]);
// only add here, because we only support boot-keyboard HID devices
dev->destroy = usb_hid_destroy;
dev->poll = usb_hid_poll;
int i;
for (i = 1; i < dev->num_endp; i++) {
if (dev->endpoints[i].type != INTERRUPT)
continue;
if (dev->endpoints[i].direction != IN)
continue;
break;
}
if (i >= dev->num_endp) {
usb_debug ("Could not find HID endpoint\n");
usb_detach_device (dev->controller, dev->address);
return;
}
usb_debug (" found endpoint %x for interrupt-in\n", i);
/* 20 buffers of 8 bytes, for every 10 msecs */
HID_INST(dev)->queue = dev->controller->create_intr_queue (&dev->endpoints[i], 8, 20, 10);
keycount = 0;
usb_debug (" configuration done.\n");
break;
case hid_boot_proto_mouse:
usb_debug("NOTICE: USB mice are not supported.\n");
break;
}
}
}
int usbhid_havechar (void)
{
return (keycount != 0);
}
int usbhid_getchar (void)
{
short ret;
if (keycount == 0)
return 0;
ret = keybuffer[0];
memmove(keybuffer, keybuffer + 1, --keycount);
return (int)ret;
}
int usbhid_getmodifiers(void)
{
return modifiers;
}