coreboot-kgpe-d16/Documentation/util/intelp2m/index.md

211 lines
5.3 KiB
Markdown
Raw Normal View History

Intel Pad to Macro (intelp2m) converter
=======================================
This utility allows one to convert the configuration DW0/1 register
values from an inteltool dump to coreboot macros.
```bash
cd util/intelp2m
make
./intelp2m -h
./intelp2m -file /path/to/inteltool.log
```
### Platforms
It is possible to use templates for parsing inteltool.log files.
To specify such a pattern, use the option `-t <template number>`.
```text
-t
template type number
0 - inteltool.log (default)
1 - gpio.h
2 - your template
```
For example, using template type 1, you can parse gpio.h from an
existing board in the coreboot project.
```bash
./intelp2m -t 1 -file coreboot/src/mainboard/yourboard/gpio.h
```
You can also add a template to 'parser/template.go' for your file type
with the configuration of the pads.
platform type is set using the -p option (Sunrise by default):
```text
-p string
set up a platform
snr - Sunrise PCH with Skylake/Kaby Lake CPU
lbg - Lewisburg PCH with Xeon SP CPU
apl - Apollo Lake SoC
cnl - CannonLake-LP or Whiskeylake/Coffeelake/Cometlake-U SoC
adl - AlderLake PCH
(default "snr")
```
```bash
./intelp2m -p <platform> -file path/to/inteltool.log
```
### Packages
![][pckgs]
[pckgs]: gopackages.png
### Bit fields in macros
Use the `-fld=cb` option to only generate a sequence of bit fields in
a new macro:
```bash
./intelp2m -fld cb -p apl -file ../apollo-inteltool.log
```
```c
_PAD_CFG_STRUCT(GPIO_37, PAD_FUNC(NF1) | PAD_TRIG(OFF) | PAD_TRIG(OFF), \
PAD_PULL(DN_20K)), /* LPSS_UART0_TXD */
```
### Raw DW0, DW1 register value
To generate the gpio.c with raw PAD_CFG_DW0 and PAD_CFG_DW1 register
values you need to use the -fld=raw option:
```bash
./intelp2m -fld raw -file /path/to/inteltool.log
```
```c
_PAD_CFG_STRUCT(GPP_A10, 0x44000500, 0x00000000),
```
```bash
./intelp2m -iiii -fld raw -file /path/to/inteltool.log
```
```c
/* GPP_A10 - CLKOUT_LPC1 */
/* DW0: 0x44000500, DW1: 0x00000000 */
/* DW0: 0x04000100 - IGNORED */
/* PAD_CFG_NF(GPP_A10, NONE, DEEP, NF1), */
_PAD_CFG_STRUCT(GPP_A10, 0x44000500, 0x00000000),
```
### Macro Check
After generating the macro, the utility checks all used
fields of the configuration registers. If some field has been
ignored, the utility generates field macros. To not check
macros, use the -n option:
```bash
./intelp2m -n -file /path/to/inteltool.log
```
In this case, some fields of the configuration registers
DW0 will be ignored.
```c
PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_38, UP_20K, DEEP, NF1, HIZCRx1, DISPUPD),
PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_39, UP_20K, DEEP, NF1, TxLASTRxE, DISPUPD),
```
### Information level
The utility can generate additional information about the bit
fields of the DW0 and DW1 configuration registers. Using the
options -i, -ii, -iii, -iiii you can set the info level from
1 to 4:
```bash
./intelp2m -i -file /path/to/inteltool.log
```
```c
_PAD_CFG_STRUCT(GPIO_39, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF),\
PAD_PULL(UP_20K) | PAD_IOSTERM(DISPUPD)), /* LPSS_UART0_TXD */
```
```bash
./intelp2m -ii -file /path/to/inteltool.log
./intelp2m -iii -file /path/to/inteltool.log
./intelp2m -iiii -file /path/to/inteltool.log
```
```c
/* GPIO_39 - LPSS_UART0_TXD */
/* DW0: 0x44000400, DW1: 0x00003100 */ --> (ii)
/* DW0 : PAD_TRIG(OFF) - IGNORED */ --> (iii)
/* PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_39, UP_20K, DEEP, NF1, TxLASTRxE,
DISPUPD), */ --> (iiii)
_PAD_CFG_STRUCT(GPIO_39, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF),
PAD_PULL(UP_20K) | PAD_IOSTERM(DISPUPD)),
```
If the -n switch was used and macros was generated without checking:
```c
/* GPIO_39 - LPSS_UART0_TXD */ --> (i)
/* DW0: 0x44000400, DW1: 0x00003100 */ --> (ii)
/* DW0: PAD_TRIG(OFF) - IGNORED */ --> (iii)
/* _PAD_CFG_STRUCT(GPIO_39, PAD_FUNC(NF1) | PAD_RESET(DEEP) |
PAD_TRIG(OFF), PAD_PULL(UP_20K) | PAD_IOSTERM(DISPUPD)), */ --> (iiii)
PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_39, UP_20K, DEEP, NF1, TxLASTRxE, \
DISPUPD),
```
### Ignoring Fields
Utilities can generate the _PAD_CFG_STRUCT macro and exclude fields
from it that are not in the corresponding PAD_CFG_*() macro:
```bash
./intelp2m -iiii -fld cb -ign -file /path/to/inteltool.log
```
```c
/* GPIO_39 - LPSS_UART0_TXD */
/* DW0: 0x44000400, DW1: 0x00003100 */
/* DW0: PAD_TRIG(OFF) - IGNORED */
/* PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_39, UP_20K, DEEP, NF1,
TxLASTRxE, DISPUPD), */
_PAD_CFG_STRUCT(GPIO_39, PAD_FUNC(NF1) | PAD_RESET(DEEP), \
PAD_PULL(UP_20K) | PAD_IOSTERM(DISPUPD)),
```
### FSP-style macro
The utility allows one to generate macros that include fsp/edk2-platform
style bitfields:
```bash
./intelp2m -i -fld fsp -p lbg -file ../crb-inteltool.log
```
```c
{ GPIO_SKL_H_GPP_A12, { GpioPadModeGpio, GpioHostOwnAcpi, GpioDirInInvOut,
GpioOutLow, GpioIntSci | GpioIntLvlEdgDis, GpioResetNormal, GpioTermNone,
GpioPadConfigLock }, /* GPIO */
```
```bash
./intelp2m -iiii -fld fsp -p lbg -file ../crb-inteltool.log
```
```c
/* GPP_A12 - GPIO */
/* DW0: 0x80880102, DW1: 0x00000000 */
/* PAD_CFG_GPI_SCI(GPP_A12, NONE, PLTRST, LEVEL, INVERT), */
{ GPIO_SKL_H_GPP_A12, { GpioPadModeGpio, GpioHostOwnAcpi, GpioDirInInvOut,
GpioOutLow, GpioIntSci | GpioIntLvlEdgDis, GpioResetNormal, GpioTermNone,
GpioPadConfigLock },
```
### Supported Chipsets
Sunrise PCH, Lewisburg PCH, Apollo Lake SoC, CannonLake-LP SoCs