GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
coreboot-kgpe-d16/src/lib/cbmem_console.c

232 lines
6.4 KiB
C
Raw Normal View History

CBMEM CONSOLE: Add CBMEM console driver implementation. The CBMEM console driver saves console output in a CBMEM area, which then is made available to Linux applications for perusing. There are some system limitations which need to be worked around to achieve this goal: - some console traffic is generated before DRAM is initialized, leave alone CBMEM initialized. - after the RAM based stage starts, a lot of traffic is generated before CBMEM is initialized. As a result, the console log lives in three different places - the bottom of the cache as RAM space, the CBMEM buffer (where it is expected to be) and a static buffer used early in the RAM stage. When execution starts (in the cache as RAM mode), the console buffer is allocated at the bottom of the cache as RAM memory address range. Once DRAM is initialized, the CBMEM structure is initialized, and then the console buffer contents are copied from the bottom of the cache as RAM space into the CBMEM area right before the cache as RAM mode is disabled. The src/lib/cbmem_console.c:cbmemc_reinit() takes care of the copying. At this point the cache as RAM memory is about to be disabled, but the ROM stage is still going generating console output. To make sure this output is not lost, cbmemc_reinit() saves the new buffer address at a fixed location (0x600 was chosen for this), and the actual "printing" function checks to see if the RAM is already initialized (the stack is in RAM), and if so, gets the console buffer pointer from this location instead of using the cache as RAM address. When the RAM stage starts, a static buffer is used to store the console output, as the CBMEM buffer location is not known. Then, when CBMEM is reinitialized, cbmemc_reinit() again takes care of the copying. In case the allocated buffers are not large enough, the excessive data is dropped, and the copying routine adds some text to the output buffer to indicate that there has been data lost and how many characters were dropped. Change-Id: I8c126e31db6cb2141f7f4f97c5047f39a8db44fc Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/719 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2011-09-30 02:27:15 +02:00
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2011 The ChromiumOS Authors. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA, 02110-1301 USA
*/
#include <console/console.h>
console: Fix includes Do not pull in console hw-specific prototypes everywhere with console.h as those are not needed for higher levels. Move prototypes for UARTs next to other consoles. Change-Id: Icbc9cd3e5bdfdab85d7dccd7c3827bba35248fb8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5232 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-17 20:34:42 +01:00
#include <console/cbmem_console.h>
CBMEM CONSOLE: Add CBMEM console driver implementation. The CBMEM console driver saves console output in a CBMEM area, which then is made available to Linux applications for perusing. There are some system limitations which need to be worked around to achieve this goal: - some console traffic is generated before DRAM is initialized, leave alone CBMEM initialized. - after the RAM based stage starts, a lot of traffic is generated before CBMEM is initialized. As a result, the console log lives in three different places - the bottom of the cache as RAM space, the CBMEM buffer (where it is expected to be) and a static buffer used early in the RAM stage. When execution starts (in the cache as RAM mode), the console buffer is allocated at the bottom of the cache as RAM memory address range. Once DRAM is initialized, the CBMEM structure is initialized, and then the console buffer contents are copied from the bottom of the cache as RAM space into the CBMEM area right before the cache as RAM mode is disabled. The src/lib/cbmem_console.c:cbmemc_reinit() takes care of the copying. At this point the cache as RAM memory is about to be disabled, but the ROM stage is still going generating console output. To make sure this output is not lost, cbmemc_reinit() saves the new buffer address at a fixed location (0x600 was chosen for this), and the actual "printing" function checks to see if the RAM is already initialized (the stack is in RAM), and if so, gets the console buffer pointer from this location instead of using the cache as RAM address. When the RAM stage starts, a static buffer is used to store the console output, as the CBMEM buffer location is not known. Then, when CBMEM is reinitialized, cbmemc_reinit() again takes care of the copying. In case the allocated buffers are not large enough, the excessive data is dropped, and the copying routine adds some text to the output buffer to indicate that there has been data lost and how many characters were dropped. Change-Id: I8c126e31db6cb2141f7f4f97c5047f39a8db44fc Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/719 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2011-09-30 02:27:15 +02:00
#include <cbmem.h>
Rename cpu/x86/car.h to arch/early_variables.h and add an ARMv7 version. Change-Id: I14fbff88d7c2b003dde57a19bf0ba9640d322156 Signed-off-by: Stefan Reinauer <reinauer@google.com> [km: rebased fa004acf8 from chromium git] Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3939 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2013-06-19 21:25:44 +02:00
#include <arch/early_variables.h>
CBMEM CONSOLE: Add CBMEM console driver implementation. The CBMEM console driver saves console output in a CBMEM area, which then is made available to Linux applications for perusing. There are some system limitations which need to be worked around to achieve this goal: - some console traffic is generated before DRAM is initialized, leave alone CBMEM initialized. - after the RAM based stage starts, a lot of traffic is generated before CBMEM is initialized. As a result, the console log lives in three different places - the bottom of the cache as RAM space, the CBMEM buffer (where it is expected to be) and a static buffer used early in the RAM stage. When execution starts (in the cache as RAM mode), the console buffer is allocated at the bottom of the cache as RAM memory address range. Once DRAM is initialized, the CBMEM structure is initialized, and then the console buffer contents are copied from the bottom of the cache as RAM space into the CBMEM area right before the cache as RAM mode is disabled. The src/lib/cbmem_console.c:cbmemc_reinit() takes care of the copying. At this point the cache as RAM memory is about to be disabled, but the ROM stage is still going generating console output. To make sure this output is not lost, cbmemc_reinit() saves the new buffer address at a fixed location (0x600 was chosen for this), and the actual "printing" function checks to see if the RAM is already initialized (the stack is in RAM), and if so, gets the console buffer pointer from this location instead of using the cache as RAM address. When the RAM stage starts, a static buffer is used to store the console output, as the CBMEM buffer location is not known. Then, when CBMEM is reinitialized, cbmemc_reinit() again takes care of the copying. In case the allocated buffers are not large enough, the excessive data is dropped, and the copying routine adds some text to the output buffer to indicate that there has been data lost and how many characters were dropped. Change-Id: I8c126e31db6cb2141f7f4f97c5047f39a8db44fc Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/719 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2011-09-30 02:27:15 +02:00
#include <string.h>
/*
* Structure describing console buffer. It is overlaid on a flat memory area,
lib: Fix spelling Change-Id: I999987af9cb44906e3c3135c0351a0cd6eb210ff Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/3756 Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10 05:51:14 +02:00
* with buffer_body covering the extent of the memory. Once the buffer is
CBMEM CONSOLE: Add CBMEM console driver implementation. The CBMEM console driver saves console output in a CBMEM area, which then is made available to Linux applications for perusing. There are some system limitations which need to be worked around to achieve this goal: - some console traffic is generated before DRAM is initialized, leave alone CBMEM initialized. - after the RAM based stage starts, a lot of traffic is generated before CBMEM is initialized. As a result, the console log lives in three different places - the bottom of the cache as RAM space, the CBMEM buffer (where it is expected to be) and a static buffer used early in the RAM stage. When execution starts (in the cache as RAM mode), the console buffer is allocated at the bottom of the cache as RAM memory address range. Once DRAM is initialized, the CBMEM structure is initialized, and then the console buffer contents are copied from the bottom of the cache as RAM space into the CBMEM area right before the cache as RAM mode is disabled. The src/lib/cbmem_console.c:cbmemc_reinit() takes care of the copying. At this point the cache as RAM memory is about to be disabled, but the ROM stage is still going generating console output. To make sure this output is not lost, cbmemc_reinit() saves the new buffer address at a fixed location (0x600 was chosen for this), and the actual "printing" function checks to see if the RAM is already initialized (the stack is in RAM), and if so, gets the console buffer pointer from this location instead of using the cache as RAM address. When the RAM stage starts, a static buffer is used to store the console output, as the CBMEM buffer location is not known. Then, when CBMEM is reinitialized, cbmemc_reinit() again takes care of the copying. In case the allocated buffers are not large enough, the excessive data is dropped, and the copying routine adds some text to the output buffer to indicate that there has been data lost and how many characters were dropped. Change-Id: I8c126e31db6cb2141f7f4f97c5047f39a8db44fc Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/719 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2011-09-30 02:27:15 +02:00
* full, the cursor keeps going but the data is dropped on the floor. This
* allows to tell how much data was lost in the process.
*/
struct cbmem_console {
u32 buffer_size;
u32 buffer_cursor;
u8 buffer_body[0];
} __attribute__ ((__packed__));
cbmem console: use cache-as-ram API and cleanup Allow for automatic cache-as-ram migration for the cbmem console. The code was refactored in the thought of making it easier to read. The #ifdefs still exist, but they are no longer sprinkled throughout the code. The cbmem_console_p variable now exists globally in both romstage and ramstage. However, the cbmem_console_p is referenced using the cache-as-ram API. When cbmem is initialized the console is automatically copied over by calling cbmemc_reinit() through a callback. Change-Id: I9f4a64e33c58b8b7318db27942e37c13804e6f2c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3235 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-10 07:45:37 +02:00
static struct cbmem_console *cbmem_console_p CAR_GLOBAL;
CBMEM console: Fix and enhance pre-RAM support Use the value of CONSOLE_PRERAM_BUFFER_SIZE to determine if we can do CBMEM console in bootblock and romstage. Kconfig forces it to zero if _BASE is unset or we cannot do CAR migration on x86. Add CBMEM console to bootblock, except for x86. Only one of bootblock and romstage clears the pre-RAM buffer. To start with empty console log on S3 wakeup, ramstage now clears previous contents of CBMEM buffer if there was no pre-RAM buffer. Unify Kconfig variable naming. TODO: ARM configurations do not define PRERAM_BUFFER_BASE values. Change-Id: I70d82da629529dbfd7bc9491223abd703cbc0115 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7862 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-12-21 07:55:47 +01:00
static void copy_console_buffer(struct cbmem_console *old_cons_p,
struct cbmem_console *new_cons_p);
CBMEM CONSOLE: Add CBMEM console driver implementation. The CBMEM console driver saves console output in a CBMEM area, which then is made available to Linux applications for perusing. There are some system limitations which need to be worked around to achieve this goal: - some console traffic is generated before DRAM is initialized, leave alone CBMEM initialized. - after the RAM based stage starts, a lot of traffic is generated before CBMEM is initialized. As a result, the console log lives in three different places - the bottom of the cache as RAM space, the CBMEM buffer (where it is expected to be) and a static buffer used early in the RAM stage. When execution starts (in the cache as RAM mode), the console buffer is allocated at the bottom of the cache as RAM memory address range. Once DRAM is initialized, the CBMEM structure is initialized, and then the console buffer contents are copied from the bottom of the cache as RAM space into the CBMEM area right before the cache as RAM mode is disabled. The src/lib/cbmem_console.c:cbmemc_reinit() takes care of the copying. At this point the cache as RAM memory is about to be disabled, but the ROM stage is still going generating console output. To make sure this output is not lost, cbmemc_reinit() saves the new buffer address at a fixed location (0x600 was chosen for this), and the actual "printing" function checks to see if the RAM is already initialized (the stack is in RAM), and if so, gets the console buffer pointer from this location instead of using the cache as RAM address. When the RAM stage starts, a static buffer is used to store the console output, as the CBMEM buffer location is not known. Then, when CBMEM is reinitialized, cbmemc_reinit() again takes care of the copying. In case the allocated buffers are not large enough, the excessive data is dropped, and the copying routine adds some text to the output buffer to indicate that there has been data lost and how many characters were dropped. Change-Id: I8c126e31db6cb2141f7f4f97c5047f39a8db44fc Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/719 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2011-09-30 02:27:15 +02:00
#ifdef __PRE_RAM__
/*
* While running from ROM, before DRAM is initialized, some area in cache as
* ram space is used for the console buffer storage. The size and location of
* the area are defined in the config.
*/
Add infrastructure for global data in the CAR phase of boot The cbmem console structure and car global data are put in their own section, with the cbmem console coming after the global data. These areas are linked to be where CAR is available and at the very bottom of the stack. There is one shortcoming of this change: The section created by this change needs to be stripped out by the Makefile since leaving it in confuses cbfstool when it installs the stage in the image. I would like to make the tools link those symbols at the right location but leave allocation of that space out of the ELF. Change-Id: Iccfb99b128d59c5b7d6164796d21ba46d2a674e0 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/727 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-01 13:27:32 +02:00
cbmem console: Locate the preram console with a symbol instead of a section. On non-x86 systems, the location of the preram CBMEM console may not be in a predictable place relative to other things in the linker script. That makes it difficult to work with as its own section because the linker will complain if you try to move backwards as it lays out memory. If the console header is treated as an actual blob of memory which has to be put in the image, we'd have to predict where to put it so that it isn't before something with a lower address or after something with a higher address. Symbols, on the other hand, can be defined arbitrarily. Change-Id: I3257b981eee0c15bb997a9f2c55a03494c6ec6f0 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/193164 Reviewed-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit a492761c27076bcac080013d509ae4aafd6dc3e3) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/7013 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-04-03 02:57:05 +02:00
extern struct cbmem_console preram_cbmem_console;
CBMEM CONSOLE: Add CBMEM console driver implementation. The CBMEM console driver saves console output in a CBMEM area, which then is made available to Linux applications for perusing. There are some system limitations which need to be worked around to achieve this goal: - some console traffic is generated before DRAM is initialized, leave alone CBMEM initialized. - after the RAM based stage starts, a lot of traffic is generated before CBMEM is initialized. As a result, the console log lives in three different places - the bottom of the cache as RAM space, the CBMEM buffer (where it is expected to be) and a static buffer used early in the RAM stage. When execution starts (in the cache as RAM mode), the console buffer is allocated at the bottom of the cache as RAM memory address range. Once DRAM is initialized, the CBMEM structure is initialized, and then the console buffer contents are copied from the bottom of the cache as RAM space into the CBMEM area right before the cache as RAM mode is disabled. The src/lib/cbmem_console.c:cbmemc_reinit() takes care of the copying. At this point the cache as RAM memory is about to be disabled, but the ROM stage is still going generating console output. To make sure this output is not lost, cbmemc_reinit() saves the new buffer address at a fixed location (0x600 was chosen for this), and the actual "printing" function checks to see if the RAM is already initialized (the stack is in RAM), and if so, gets the console buffer pointer from this location instead of using the cache as RAM address. When the RAM stage starts, a static buffer is used to store the console output, as the CBMEM buffer location is not known. Then, when CBMEM is reinitialized, cbmemc_reinit() again takes care of the copying. In case the allocated buffers are not large enough, the excessive data is dropped, and the copying routine adds some text to the output buffer to indicate that there has been data lost and how many characters were dropped. Change-Id: I8c126e31db6cb2141f7f4f97c5047f39a8db44fc Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/719 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2011-09-30 02:27:15 +02:00
#else
/*
* When running from RAM, a lot of console output is generated before CBMEM is
* reinitialized. This static buffer is used to store that output temporarily,
* to be concatenated with the CBMEM console buffer contents accumulated
* during the ROM stage, once CBMEM becomes available at RAM stage.
*/
cbmem console: reduce temporary buffer size for dynamic CBMEM When using dynamic CBMEM the CBMEM area is initialized before entering ram stage, and so we need a way smaller temporary buffer for the CBMEM console during early bits of ram stage. In practice around 256 bytes are needed, but keep the buffer at 1k so we make sure we don't run out. TEST=Boot tested on pit BRANCH=none BUG=none Change-Id: I462810b7bafbcc57f8e5f9b1d1f38cfdf85fa630 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://chromium-review.googlesource.com/168575 Reviewed-by: Aaron Durbin <adurbin@chromium.org> [km: cherry-pick 7fd1bbc0 from chromium git] Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4293 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-09-09 20:22:18 +02:00
CBMEM: Support DYNAMIC_CBMEM with LATE_CBMEM_INIT We can now create CBMEM with dynamic allocation even if CBMEM location is resolved late in ramstage. Change-Id: I8529ccbcd4a0e567ebe0a46232ac5d16476e81a8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7861 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2014-12-19 07:20:45 +01:00
#if IS_ENABLED(CONFIG_EARLY_CBMEM_INIT)
cbmem console: reduce temporary buffer size for dynamic CBMEM When using dynamic CBMEM the CBMEM area is initialized before entering ram stage, and so we need a way smaller temporary buffer for the CBMEM console during early bits of ram stage. In practice around 256 bytes are needed, but keep the buffer at 1k so we make sure we don't run out. TEST=Boot tested on pit BRANCH=none BUG=none Change-Id: I462810b7bafbcc57f8e5f9b1d1f38cfdf85fa630 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://chromium-review.googlesource.com/168575 Reviewed-by: Aaron Durbin <adurbin@chromium.org> [km: cherry-pick 7fd1bbc0 from chromium git] Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4293 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-09-09 20:22:18 +02:00
#define STATIC_CONSOLE_SIZE 1024
#else
CBMEM console: increase temporary buffer size for non-dynamic CBMEM Make temporary buffer allocation equal with the allocation in CBMEM and let copy_console_buffer() handle possible truncation. When not using dynamic CBMEM the CBMEM area is initialized late in the ramstage and should be able to hold almost as many characters as the CBMEM can hold. We have seen 40000 was not always enough with logging level set to spew, new default size is 0x10000. Change-Id: If4b143fdf807e28b6766b8b99db5216b767948d5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4295 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-11-27 21:54:11 +01:00
#define STATIC_CONSOLE_SIZE CONFIG_CONSOLE_CBMEM_BUFFER_SIZE
cbmem console: reduce temporary buffer size for dynamic CBMEM When using dynamic CBMEM the CBMEM area is initialized before entering ram stage, and so we need a way smaller temporary buffer for the CBMEM console during early bits of ram stage. In practice around 256 bytes are needed, but keep the buffer at 1k so we make sure we don't run out. TEST=Boot tested on pit BRANCH=none BUG=none Change-Id: I462810b7bafbcc57f8e5f9b1d1f38cfdf85fa630 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://chromium-review.googlesource.com/168575 Reviewed-by: Aaron Durbin <adurbin@chromium.org> [km: cherry-pick 7fd1bbc0 from chromium git] Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4293 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-09-09 20:22:18 +02:00
#endif
static u8 static_console[STATIC_CONSOLE_SIZE];
CBMEM CONSOLE: Add CBMEM console driver implementation. The CBMEM console driver saves console output in a CBMEM area, which then is made available to Linux applications for perusing. There are some system limitations which need to be worked around to achieve this goal: - some console traffic is generated before DRAM is initialized, leave alone CBMEM initialized. - after the RAM based stage starts, a lot of traffic is generated before CBMEM is initialized. As a result, the console log lives in three different places - the bottom of the cache as RAM space, the CBMEM buffer (where it is expected to be) and a static buffer used early in the RAM stage. When execution starts (in the cache as RAM mode), the console buffer is allocated at the bottom of the cache as RAM memory address range. Once DRAM is initialized, the CBMEM structure is initialized, and then the console buffer contents are copied from the bottom of the cache as RAM space into the CBMEM area right before the cache as RAM mode is disabled. The src/lib/cbmem_console.c:cbmemc_reinit() takes care of the copying. At this point the cache as RAM memory is about to be disabled, but the ROM stage is still going generating console output. To make sure this output is not lost, cbmemc_reinit() saves the new buffer address at a fixed location (0x600 was chosen for this), and the actual "printing" function checks to see if the RAM is already initialized (the stack is in RAM), and if so, gets the console buffer pointer from this location instead of using the cache as RAM address. When the RAM stage starts, a static buffer is used to store the console output, as the CBMEM buffer location is not known. Then, when CBMEM is reinitialized, cbmemc_reinit() again takes care of the copying. In case the allocated buffers are not large enough, the excessive data is dropped, and the copying routine adds some text to the output buffer to indicate that there has been data lost and how many characters were dropped. Change-Id: I8c126e31db6cb2141f7f4f97c5047f39a8db44fc Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/719 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2011-09-30 02:27:15 +02:00
#endif
CBMEM console: Fix and enhance pre-RAM support Use the value of CONSOLE_PRERAM_BUFFER_SIZE to determine if we can do CBMEM console in bootblock and romstage. Kconfig forces it to zero if _BASE is unset or we cannot do CAR migration on x86. Add CBMEM console to bootblock, except for x86. Only one of bootblock and romstage clears the pre-RAM buffer. To start with empty console log on S3 wakeup, ramstage now clears previous contents of CBMEM buffer if there was no pre-RAM buffer. Unify Kconfig variable naming. TODO: ARM configurations do not define PRERAM_BUFFER_BASE values. Change-Id: I70d82da629529dbfd7bc9491223abd703cbc0115 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7862 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-12-21 07:55:47 +01:00
/* flags for init */
#define CBMEMC_RESET (1<<0)
#define CBMEMC_APPEND (1<<1)
cbmem console: use cache-as-ram API and cleanup Allow for automatic cache-as-ram migration for the cbmem console. The code was refactored in the thought of making it easier to read. The #ifdefs still exist, but they are no longer sprinkled throughout the code. The cbmem_console_p variable now exists globally in both romstage and ramstage. However, the cbmem_console_p is referenced using the cache-as-ram API. When cbmem is initialized the console is automatically copied over by calling cbmemc_reinit() through a callback. Change-Id: I9f4a64e33c58b8b7318db27942e37c13804e6f2c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3235 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-10 07:45:37 +02:00
static inline struct cbmem_console *current_console(void)
{
CBMEM console: Fix CAR migration step With the change it becomes irrelevant if memcpy() car.global_data or cbmemc_reinit() is done first. Change-Id: Ie479eef346c959e97dcc55861ccb0db1321fb7b2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8032 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2014-12-31 17:34:59 +01:00
return car_sync_var(cbmem_console_p);
cbmem console: use cache-as-ram API and cleanup Allow for automatic cache-as-ram migration for the cbmem console. The code was refactored in the thought of making it easier to read. The #ifdefs still exist, but they are no longer sprinkled throughout the code. The cbmem_console_p variable now exists globally in both romstage and ramstage. However, the cbmem_console_p is referenced using the cache-as-ram API. When cbmem is initialized the console is automatically copied over by calling cbmemc_reinit() through a callback. Change-Id: I9f4a64e33c58b8b7318db27942e37c13804e6f2c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3235 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-10 07:45:37 +02:00
}
static inline void current_console_set(struct cbmem_console *new_console_p)
{
car_set_var(cbmem_console_p, new_console_p);
}
CBMEM console: Fix and enhance pre-RAM support Use the value of CONSOLE_PRERAM_BUFFER_SIZE to determine if we can do CBMEM console in bootblock and romstage. Kconfig forces it to zero if _BASE is unset or we cannot do CAR migration on x86. Add CBMEM console to bootblock, except for x86. Only one of bootblock and romstage clears the pre-RAM buffer. To start with empty console log on S3 wakeup, ramstage now clears previous contents of CBMEM buffer if there was no pre-RAM buffer. Unify Kconfig variable naming. TODO: ARM configurations do not define PRERAM_BUFFER_BASE values. Change-Id: I70d82da629529dbfd7bc9491223abd703cbc0115 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7862 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-12-21 07:55:47 +01:00
static inline void init_console_ptr(void *storage, u32 total_space, int flags)
cbmem console: use cache-as-ram API and cleanup Allow for automatic cache-as-ram migration for the cbmem console. The code was refactored in the thought of making it easier to read. The #ifdefs still exist, but they are no longer sprinkled throughout the code. The cbmem_console_p variable now exists globally in both romstage and ramstage. However, the cbmem_console_p is referenced using the cache-as-ram API. When cbmem is initialized the console is automatically copied over by calling cbmemc_reinit() through a callback. Change-Id: I9f4a64e33c58b8b7318db27942e37c13804e6f2c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3235 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-10 07:45:37 +02:00
{
struct cbmem_console *cbm_cons_p = storage;
CBMEM console: Fix and enhance pre-RAM support Use the value of CONSOLE_PRERAM_BUFFER_SIZE to determine if we can do CBMEM console in bootblock and romstage. Kconfig forces it to zero if _BASE is unset or we cannot do CAR migration on x86. Add CBMEM console to bootblock, except for x86. Only one of bootblock and romstage clears the pre-RAM buffer. To start with empty console log on S3 wakeup, ramstage now clears previous contents of CBMEM buffer if there was no pre-RAM buffer. Unify Kconfig variable naming. TODO: ARM configurations do not define PRERAM_BUFFER_BASE values. Change-Id: I70d82da629529dbfd7bc9491223abd703cbc0115 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7862 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-12-21 07:55:47 +01:00
if (!cbm_cons_p) {
current_console_set(NULL);
return;
}
if (flags & CBMEMC_RESET) {
cbm_cons_p->buffer_size = total_space - sizeof(struct cbmem_console);
cbm_cons_p->buffer_cursor = 0;
}
if (flags & CBMEMC_APPEND) {
struct cbmem_console *tmp_cons_p = current_console();
if (tmp_cons_p)
copy_console_buffer(tmp_cons_p, cbm_cons_p);
}
current_console_set(cbm_cons_p);
cbmem console: use cache-as-ram API and cleanup Allow for automatic cache-as-ram migration for the cbmem console. The code was refactored in the thought of making it easier to read. The #ifdefs still exist, but they are no longer sprinkled throughout the code. The cbmem_console_p variable now exists globally in both romstage and ramstage. However, the cbmem_console_p is referenced using the cache-as-ram API. When cbmem is initialized the console is automatically copied over by calling cbmemc_reinit() through a callback. Change-Id: I9f4a64e33c58b8b7318db27942e37c13804e6f2c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3235 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-10 07:45:37 +02:00
}
CBMEM CONSOLE: Add CBMEM console driver implementation. The CBMEM console driver saves console output in a CBMEM area, which then is made available to Linux applications for perusing. There are some system limitations which need to be worked around to achieve this goal: - some console traffic is generated before DRAM is initialized, leave alone CBMEM initialized. - after the RAM based stage starts, a lot of traffic is generated before CBMEM is initialized. As a result, the console log lives in three different places - the bottom of the cache as RAM space, the CBMEM buffer (where it is expected to be) and a static buffer used early in the RAM stage. When execution starts (in the cache as RAM mode), the console buffer is allocated at the bottom of the cache as RAM memory address range. Once DRAM is initialized, the CBMEM structure is initialized, and then the console buffer contents are copied from the bottom of the cache as RAM space into the CBMEM area right before the cache as RAM mode is disabled. The src/lib/cbmem_console.c:cbmemc_reinit() takes care of the copying. At this point the cache as RAM memory is about to be disabled, but the ROM stage is still going generating console output. To make sure this output is not lost, cbmemc_reinit() saves the new buffer address at a fixed location (0x600 was chosen for this), and the actual "printing" function checks to see if the RAM is already initialized (the stack is in RAM), and if so, gets the console buffer pointer from this location instead of using the cache as RAM address. When the RAM stage starts, a static buffer is used to store the console output, as the CBMEM buffer location is not known. Then, when CBMEM is reinitialized, cbmemc_reinit() again takes care of the copying. In case the allocated buffers are not large enough, the excessive data is dropped, and the copying routine adds some text to the output buffer to indicate that there has been data lost and how many characters were dropped. Change-Id: I8c126e31db6cb2141f7f4f97c5047f39a8db44fc Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/719 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2011-09-30 02:27:15 +02:00
void cbmemc_init(void)
{
#ifdef __PRE_RAM__
CBMEM console: Fix and enhance pre-RAM support Use the value of CONSOLE_PRERAM_BUFFER_SIZE to determine if we can do CBMEM console in bootblock and romstage. Kconfig forces it to zero if _BASE is unset or we cannot do CAR migration on x86. Add CBMEM console to bootblock, except for x86. Only one of bootblock and romstage clears the pre-RAM buffer. To start with empty console log on S3 wakeup, ramstage now clears previous contents of CBMEM buffer if there was no pre-RAM buffer. Unify Kconfig variable naming. TODO: ARM configurations do not define PRERAM_BUFFER_BASE values. Change-Id: I70d82da629529dbfd7bc9491223abd703cbc0115 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7862 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-12-21 07:55:47 +01:00
int flags = CBMEMC_RESET;
/* Do not clear output from bootblock. */
if (ENV_ROMSTAGE && !IS_ENABLED(CONFIG_CACHE_AS_RAM))
if (IS_ENABLED(CONFIG_BOOTBLOCK_CONSOLE))
flags = 0;
cbmem console: Locate the preram console with a symbol instead of a section. On non-x86 systems, the location of the preram CBMEM console may not be in a predictable place relative to other things in the linker script. That makes it difficult to work with as its own section because the linker will complain if you try to move backwards as it lays out memory. If the console header is treated as an actual blob of memory which has to be put in the image, we'd have to predict where to put it so that it isn't before something with a lower address or after something with a higher address. Symbols, on the other hand, can be defined arbitrarily. Change-Id: I3257b981eee0c15bb997a9f2c55a03494c6ec6f0 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/193164 Reviewed-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit a492761c27076bcac080013d509ae4aafd6dc3e3) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/7013 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-04-03 02:57:05 +02:00
init_console_ptr(&preram_cbmem_console,
CBMEM console: Fix and enhance pre-RAM support Use the value of CONSOLE_PRERAM_BUFFER_SIZE to determine if we can do CBMEM console in bootblock and romstage. Kconfig forces it to zero if _BASE is unset or we cannot do CAR migration on x86. Add CBMEM console to bootblock, except for x86. Only one of bootblock and romstage clears the pre-RAM buffer. To start with empty console log on S3 wakeup, ramstage now clears previous contents of CBMEM buffer if there was no pre-RAM buffer. Unify Kconfig variable naming. TODO: ARM configurations do not define PRERAM_BUFFER_BASE values. Change-Id: I70d82da629529dbfd7bc9491223abd703cbc0115 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7862 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-12-21 07:55:47 +01:00
CONFIG_CONSOLE_PRERAM_BUFFER_SIZE, flags);
CBMEM CONSOLE: Add CBMEM console driver implementation. The CBMEM console driver saves console output in a CBMEM area, which then is made available to Linux applications for perusing. There are some system limitations which need to be worked around to achieve this goal: - some console traffic is generated before DRAM is initialized, leave alone CBMEM initialized. - after the RAM based stage starts, a lot of traffic is generated before CBMEM is initialized. As a result, the console log lives in three different places - the bottom of the cache as RAM space, the CBMEM buffer (where it is expected to be) and a static buffer used early in the RAM stage. When execution starts (in the cache as RAM mode), the console buffer is allocated at the bottom of the cache as RAM memory address range. Once DRAM is initialized, the CBMEM structure is initialized, and then the console buffer contents are copied from the bottom of the cache as RAM space into the CBMEM area right before the cache as RAM mode is disabled. The src/lib/cbmem_console.c:cbmemc_reinit() takes care of the copying. At this point the cache as RAM memory is about to be disabled, but the ROM stage is still going generating console output. To make sure this output is not lost, cbmemc_reinit() saves the new buffer address at a fixed location (0x600 was chosen for this), and the actual "printing" function checks to see if the RAM is already initialized (the stack is in RAM), and if so, gets the console buffer pointer from this location instead of using the cache as RAM address. When the RAM stage starts, a static buffer is used to store the console output, as the CBMEM buffer location is not known. Then, when CBMEM is reinitialized, cbmemc_reinit() again takes care of the copying. In case the allocated buffers are not large enough, the excessive data is dropped, and the copying routine adds some text to the output buffer to indicate that there has been data lost and how many characters were dropped. Change-Id: I8c126e31db6cb2141f7f4f97c5047f39a8db44fc Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/719 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2011-09-30 02:27:15 +02:00
#else
/*
* Initializing before CBMEM is available, use static buffer to store
* the log.
*/
CBMEM console: Fix and enhance pre-RAM support Use the value of CONSOLE_PRERAM_BUFFER_SIZE to determine if we can do CBMEM console in bootblock and romstage. Kconfig forces it to zero if _BASE is unset or we cannot do CAR migration on x86. Add CBMEM console to bootblock, except for x86. Only one of bootblock and romstage clears the pre-RAM buffer. To start with empty console log on S3 wakeup, ramstage now clears previous contents of CBMEM buffer if there was no pre-RAM buffer. Unify Kconfig variable naming. TODO: ARM configurations do not define PRERAM_BUFFER_BASE values. Change-Id: I70d82da629529dbfd7bc9491223abd703cbc0115 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7862 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-12-21 07:55:47 +01:00
init_console_ptr(static_console, sizeof(static_console), CBMEMC_RESET);
CBMEM CONSOLE: Add CBMEM console driver implementation. The CBMEM console driver saves console output in a CBMEM area, which then is made available to Linux applications for perusing. There are some system limitations which need to be worked around to achieve this goal: - some console traffic is generated before DRAM is initialized, leave alone CBMEM initialized. - after the RAM based stage starts, a lot of traffic is generated before CBMEM is initialized. As a result, the console log lives in three different places - the bottom of the cache as RAM space, the CBMEM buffer (where it is expected to be) and a static buffer used early in the RAM stage. When execution starts (in the cache as RAM mode), the console buffer is allocated at the bottom of the cache as RAM memory address range. Once DRAM is initialized, the CBMEM structure is initialized, and then the console buffer contents are copied from the bottom of the cache as RAM space into the CBMEM area right before the cache as RAM mode is disabled. The src/lib/cbmem_console.c:cbmemc_reinit() takes care of the copying. At this point the cache as RAM memory is about to be disabled, but the ROM stage is still going generating console output. To make sure this output is not lost, cbmemc_reinit() saves the new buffer address at a fixed location (0x600 was chosen for this), and the actual "printing" function checks to see if the RAM is already initialized (the stack is in RAM), and if so, gets the console buffer pointer from this location instead of using the cache as RAM address. When the RAM stage starts, a static buffer is used to store the console output, as the CBMEM buffer location is not known. Then, when CBMEM is reinitialized, cbmemc_reinit() again takes care of the copying. In case the allocated buffers are not large enough, the excessive data is dropped, and the copying routine adds some text to the output buffer to indicate that there has been data lost and how many characters were dropped. Change-Id: I8c126e31db6cb2141f7f4f97c5047f39a8db44fc Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/719 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2011-09-30 02:27:15 +02:00
#endif
}
void cbmemc_tx_byte(unsigned char data)
{
cbmem console: use cache-as-ram API and cleanup Allow for automatic cache-as-ram migration for the cbmem console. The code was refactored in the thought of making it easier to read. The #ifdefs still exist, but they are no longer sprinkled throughout the code. The cbmem_console_p variable now exists globally in both romstage and ramstage. However, the cbmem_console_p is referenced using the cache-as-ram API. When cbmem is initialized the console is automatically copied over by calling cbmemc_reinit() through a callback. Change-Id: I9f4a64e33c58b8b7318db27942e37c13804e6f2c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3235 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-10 07:45:37 +02:00
struct cbmem_console *cbm_cons_p = current_console();
CBMEM CONSOLE: Add CBMEM console driver implementation. The CBMEM console driver saves console output in a CBMEM area, which then is made available to Linux applications for perusing. There are some system limitations which need to be worked around to achieve this goal: - some console traffic is generated before DRAM is initialized, leave alone CBMEM initialized. - after the RAM based stage starts, a lot of traffic is generated before CBMEM is initialized. As a result, the console log lives in three different places - the bottom of the cache as RAM space, the CBMEM buffer (where it is expected to be) and a static buffer used early in the RAM stage. When execution starts (in the cache as RAM mode), the console buffer is allocated at the bottom of the cache as RAM memory address range. Once DRAM is initialized, the CBMEM structure is initialized, and then the console buffer contents are copied from the bottom of the cache as RAM space into the CBMEM area right before the cache as RAM mode is disabled. The src/lib/cbmem_console.c:cbmemc_reinit() takes care of the copying. At this point the cache as RAM memory is about to be disabled, but the ROM stage is still going generating console output. To make sure this output is not lost, cbmemc_reinit() saves the new buffer address at a fixed location (0x600 was chosen for this), and the actual "printing" function checks to see if the RAM is already initialized (the stack is in RAM), and if so, gets the console buffer pointer from this location instead of using the cache as RAM address. When the RAM stage starts, a static buffer is used to store the console output, as the CBMEM buffer location is not known. Then, when CBMEM is reinitialized, cbmemc_reinit() again takes care of the copying. In case the allocated buffers are not large enough, the excessive data is dropped, and the copying routine adds some text to the output buffer to indicate that there has been data lost and how many characters were dropped. Change-Id: I8c126e31db6cb2141f7f4f97c5047f39a8db44fc Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/719 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2011-09-30 02:27:15 +02:00
u32 cursor;
cbmem console: use cache-as-ram API and cleanup Allow for automatic cache-as-ram migration for the cbmem console. The code was refactored in the thought of making it easier to read. The #ifdefs still exist, but they are no longer sprinkled throughout the code. The cbmem_console_p variable now exists globally in both romstage and ramstage. However, the cbmem_console_p is referenced using the cache-as-ram API. When cbmem is initialized the console is automatically copied over by calling cbmemc_reinit() through a callback. Change-Id: I9f4a64e33c58b8b7318db27942e37c13804e6f2c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3235 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-10 07:45:37 +02:00
CBMEM CONSOLE: Add CBMEM console driver implementation. The CBMEM console driver saves console output in a CBMEM area, which then is made available to Linux applications for perusing. There are some system limitations which need to be worked around to achieve this goal: - some console traffic is generated before DRAM is initialized, leave alone CBMEM initialized. - after the RAM based stage starts, a lot of traffic is generated before CBMEM is initialized. As a result, the console log lives in three different places - the bottom of the cache as RAM space, the CBMEM buffer (where it is expected to be) and a static buffer used early in the RAM stage. When execution starts (in the cache as RAM mode), the console buffer is allocated at the bottom of the cache as RAM memory address range. Once DRAM is initialized, the CBMEM structure is initialized, and then the console buffer contents are copied from the bottom of the cache as RAM space into the CBMEM area right before the cache as RAM mode is disabled. The src/lib/cbmem_console.c:cbmemc_reinit() takes care of the copying. At this point the cache as RAM memory is about to be disabled, but the ROM stage is still going generating console output. To make sure this output is not lost, cbmemc_reinit() saves the new buffer address at a fixed location (0x600 was chosen for this), and the actual "printing" function checks to see if the RAM is already initialized (the stack is in RAM), and if so, gets the console buffer pointer from this location instead of using the cache as RAM address. When the RAM stage starts, a static buffer is used to store the console output, as the CBMEM buffer location is not known. Then, when CBMEM is reinitialized, cbmemc_reinit() again takes care of the copying. In case the allocated buffers are not large enough, the excessive data is dropped, and the copying routine adds some text to the output buffer to indicate that there has been data lost and how many characters were dropped. Change-Id: I8c126e31db6cb2141f7f4f97c5047f39a8db44fc Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/719 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2011-09-30 02:27:15 +02:00
if (!cbm_cons_p)
return;
cursor = cbm_cons_p->buffer_cursor++;
if (cursor < cbm_cons_p->buffer_size)
cbm_cons_p->buffer_body[cursor] = data;
}
/*
* Copy the current console buffer (either from the cache as RAM area, or from
* the static buffer, pointed at by cbmem_console_p) into the CBMEM console
* buffer space (pointed at by new_cons_p), concatenating the copied data with
* the CBMEM console buffer contents.
*
* If there is overflow - add to the destination area a string, reporting the
lib: Fix spelling Change-Id: I999987af9cb44906e3c3135c0351a0cd6eb210ff Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/3756 Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10 05:51:14 +02:00
* overflow and the number of dropped characters.
CBMEM CONSOLE: Add CBMEM console driver implementation. The CBMEM console driver saves console output in a CBMEM area, which then is made available to Linux applications for perusing. There are some system limitations which need to be worked around to achieve this goal: - some console traffic is generated before DRAM is initialized, leave alone CBMEM initialized. - after the RAM based stage starts, a lot of traffic is generated before CBMEM is initialized. As a result, the console log lives in three different places - the bottom of the cache as RAM space, the CBMEM buffer (where it is expected to be) and a static buffer used early in the RAM stage. When execution starts (in the cache as RAM mode), the console buffer is allocated at the bottom of the cache as RAM memory address range. Once DRAM is initialized, the CBMEM structure is initialized, and then the console buffer contents are copied from the bottom of the cache as RAM space into the CBMEM area right before the cache as RAM mode is disabled. The src/lib/cbmem_console.c:cbmemc_reinit() takes care of the copying. At this point the cache as RAM memory is about to be disabled, but the ROM stage is still going generating console output. To make sure this output is not lost, cbmemc_reinit() saves the new buffer address at a fixed location (0x600 was chosen for this), and the actual "printing" function checks to see if the RAM is already initialized (the stack is in RAM), and if so, gets the console buffer pointer from this location instead of using the cache as RAM address. When the RAM stage starts, a static buffer is used to store the console output, as the CBMEM buffer location is not known. Then, when CBMEM is reinitialized, cbmemc_reinit() again takes care of the copying. In case the allocated buffers are not large enough, the excessive data is dropped, and the copying routine adds some text to the output buffer to indicate that there has been data lost and how many characters were dropped. Change-Id: I8c126e31db6cb2141f7f4f97c5047f39a8db44fc Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/719 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2011-09-30 02:27:15 +02:00
*/
CBMEM console: Fix and enhance pre-RAM support Use the value of CONSOLE_PRERAM_BUFFER_SIZE to determine if we can do CBMEM console in bootblock and romstage. Kconfig forces it to zero if _BASE is unset or we cannot do CAR migration on x86. Add CBMEM console to bootblock, except for x86. Only one of bootblock and romstage clears the pre-RAM buffer. To start with empty console log on S3 wakeup, ramstage now clears previous contents of CBMEM buffer if there was no pre-RAM buffer. Unify Kconfig variable naming. TODO: ARM configurations do not define PRERAM_BUFFER_BASE values. Change-Id: I70d82da629529dbfd7bc9491223abd703cbc0115 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7862 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-12-21 07:55:47 +01:00
static void copy_console_buffer(struct cbmem_console *old_cons_p,
struct cbmem_console *new_cons_p)
CBMEM CONSOLE: Add CBMEM console driver implementation. The CBMEM console driver saves console output in a CBMEM area, which then is made available to Linux applications for perusing. There are some system limitations which need to be worked around to achieve this goal: - some console traffic is generated before DRAM is initialized, leave alone CBMEM initialized. - after the RAM based stage starts, a lot of traffic is generated before CBMEM is initialized. As a result, the console log lives in three different places - the bottom of the cache as RAM space, the CBMEM buffer (where it is expected to be) and a static buffer used early in the RAM stage. When execution starts (in the cache as RAM mode), the console buffer is allocated at the bottom of the cache as RAM memory address range. Once DRAM is initialized, the CBMEM structure is initialized, and then the console buffer contents are copied from the bottom of the cache as RAM space into the CBMEM area right before the cache as RAM mode is disabled. The src/lib/cbmem_console.c:cbmemc_reinit() takes care of the copying. At this point the cache as RAM memory is about to be disabled, but the ROM stage is still going generating console output. To make sure this output is not lost, cbmemc_reinit() saves the new buffer address at a fixed location (0x600 was chosen for this), and the actual "printing" function checks to see if the RAM is already initialized (the stack is in RAM), and if so, gets the console buffer pointer from this location instead of using the cache as RAM address. When the RAM stage starts, a static buffer is used to store the console output, as the CBMEM buffer location is not known. Then, when CBMEM is reinitialized, cbmemc_reinit() again takes care of the copying. In case the allocated buffers are not large enough, the excessive data is dropped, and the copying routine adds some text to the output buffer to indicate that there has been data lost and how many characters were dropped. Change-Id: I8c126e31db6cb2141f7f4f97c5047f39a8db44fc Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/719 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2011-09-30 02:27:15 +02:00
{
CBMEM console: Prevent buffer overrun Make sure memcpy target and a possible message telling log was truncated stay within the allocated region for CBMEM console. This fixes observed CBMEM corruption on platforms that do not use CBMEM console during romstage. Those platforms will need an additional fix to reset cursor position to zero on s3 resume. Change-Id: I76501ca3afc716545ca76ebca1119995126a43f8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4292 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-11-27 16:51:31 +01:00
u32 copy_size, dropped_chars;
CBMEM CONSOLE: Add CBMEM console driver implementation. The CBMEM console driver saves console output in a CBMEM area, which then is made available to Linux applications for perusing. There are some system limitations which need to be worked around to achieve this goal: - some console traffic is generated before DRAM is initialized, leave alone CBMEM initialized. - after the RAM based stage starts, a lot of traffic is generated before CBMEM is initialized. As a result, the console log lives in three different places - the bottom of the cache as RAM space, the CBMEM buffer (where it is expected to be) and a static buffer used early in the RAM stage. When execution starts (in the cache as RAM mode), the console buffer is allocated at the bottom of the cache as RAM memory address range. Once DRAM is initialized, the CBMEM structure is initialized, and then the console buffer contents are copied from the bottom of the cache as RAM space into the CBMEM area right before the cache as RAM mode is disabled. The src/lib/cbmem_console.c:cbmemc_reinit() takes care of the copying. At this point the cache as RAM memory is about to be disabled, but the ROM stage is still going generating console output. To make sure this output is not lost, cbmemc_reinit() saves the new buffer address at a fixed location (0x600 was chosen for this), and the actual "printing" function checks to see if the RAM is already initialized (the stack is in RAM), and if so, gets the console buffer pointer from this location instead of using the cache as RAM address. When the RAM stage starts, a static buffer is used to store the console output, as the CBMEM buffer location is not known. Then, when CBMEM is reinitialized, cbmemc_reinit() again takes care of the copying. In case the allocated buffers are not large enough, the excessive data is dropped, and the copying routine adds some text to the output buffer to indicate that there has been data lost and how many characters were dropped. Change-Id: I8c126e31db6cb2141f7f4f97c5047f39a8db44fc Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/719 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2011-09-30 02:27:15 +02:00
u32 cursor = new_cons_p->buffer_cursor;
cbmem console: use cache-as-ram API and cleanup Allow for automatic cache-as-ram migration for the cbmem console. The code was refactored in the thought of making it easier to read. The #ifdefs still exist, but they are no longer sprinkled throughout the code. The cbmem_console_p variable now exists globally in both romstage and ramstage. However, the cbmem_console_p is referenced using the cache-as-ram API. When cbmem is initialized the console is automatically copied over by calling cbmemc_reinit() through a callback. Change-Id: I9f4a64e33c58b8b7318db27942e37c13804e6f2c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3235 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-10 07:45:37 +02:00
CBMEM console: Prevent buffer overrun Make sure memcpy target and a possible message telling log was truncated stay within the allocated region for CBMEM console. This fixes observed CBMEM corruption on platforms that do not use CBMEM console during romstage. Those platforms will need an additional fix to reset cursor position to zero on s3 resume. Change-Id: I76501ca3afc716545ca76ebca1119995126a43f8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4292 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-11-27 16:51:31 +01:00
if (old_cons_p->buffer_cursor < old_cons_p->buffer_size)
copy_size = old_cons_p->buffer_cursor;
else
copy_size = old_cons_p->buffer_size;
if (cursor > new_cons_p->buffer_size)
copy_size = 0;
else if (cursor + copy_size > new_cons_p->buffer_size)
copy_size = new_cons_p->buffer_size - cursor;
dropped_chars = old_cons_p->buffer_cursor - copy_size;
if (dropped_chars) {
/* Reserve 80 chars to report overflow, if possible. */
if (copy_size < 80)
return;
copy_size -= 80;
dropped_chars += 80;
}
CBMEM CONSOLE: Add CBMEM console driver implementation. The CBMEM console driver saves console output in a CBMEM area, which then is made available to Linux applications for perusing. There are some system limitations which need to be worked around to achieve this goal: - some console traffic is generated before DRAM is initialized, leave alone CBMEM initialized. - after the RAM based stage starts, a lot of traffic is generated before CBMEM is initialized. As a result, the console log lives in three different places - the bottom of the cache as RAM space, the CBMEM buffer (where it is expected to be) and a static buffer used early in the RAM stage. When execution starts (in the cache as RAM mode), the console buffer is allocated at the bottom of the cache as RAM memory address range. Once DRAM is initialized, the CBMEM structure is initialized, and then the console buffer contents are copied from the bottom of the cache as RAM space into the CBMEM area right before the cache as RAM mode is disabled. The src/lib/cbmem_console.c:cbmemc_reinit() takes care of the copying. At this point the cache as RAM memory is about to be disabled, but the ROM stage is still going generating console output. To make sure this output is not lost, cbmemc_reinit() saves the new buffer address at a fixed location (0x600 was chosen for this), and the actual "printing" function checks to see if the RAM is already initialized (the stack is in RAM), and if so, gets the console buffer pointer from this location instead of using the cache as RAM address. When the RAM stage starts, a static buffer is used to store the console output, as the CBMEM buffer location is not known. Then, when CBMEM is reinitialized, cbmemc_reinit() again takes care of the copying. In case the allocated buffers are not large enough, the excessive data is dropped, and the copying routine adds some text to the output buffer to indicate that there has been data lost and how many characters were dropped. Change-Id: I8c126e31db6cb2141f7f4f97c5047f39a8db44fc Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/719 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2011-09-30 02:27:15 +02:00
cbmem console: use cache-as-ram API and cleanup Allow for automatic cache-as-ram migration for the cbmem console. The code was refactored in the thought of making it easier to read. The #ifdefs still exist, but they are no longer sprinkled throughout the code. The cbmem_console_p variable now exists globally in both romstage and ramstage. However, the cbmem_console_p is referenced using the cache-as-ram API. When cbmem is initialized the console is automatically copied over by calling cbmemc_reinit() through a callback. Change-Id: I9f4a64e33c58b8b7318db27942e37c13804e6f2c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3235 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-10 07:45:37 +02:00
memcpy(new_cons_p->buffer_body + cursor, old_cons_p->buffer_body,
CBMEM CONSOLE: Add CBMEM console driver implementation. The CBMEM console driver saves console output in a CBMEM area, which then is made available to Linux applications for perusing. There are some system limitations which need to be worked around to achieve this goal: - some console traffic is generated before DRAM is initialized, leave alone CBMEM initialized. - after the RAM based stage starts, a lot of traffic is generated before CBMEM is initialized. As a result, the console log lives in three different places - the bottom of the cache as RAM space, the CBMEM buffer (where it is expected to be) and a static buffer used early in the RAM stage. When execution starts (in the cache as RAM mode), the console buffer is allocated at the bottom of the cache as RAM memory address range. Once DRAM is initialized, the CBMEM structure is initialized, and then the console buffer contents are copied from the bottom of the cache as RAM space into the CBMEM area right before the cache as RAM mode is disabled. The src/lib/cbmem_console.c:cbmemc_reinit() takes care of the copying. At this point the cache as RAM memory is about to be disabled, but the ROM stage is still going generating console output. To make sure this output is not lost, cbmemc_reinit() saves the new buffer address at a fixed location (0x600 was chosen for this), and the actual "printing" function checks to see if the RAM is already initialized (the stack is in RAM), and if so, gets the console buffer pointer from this location instead of using the cache as RAM address. When the RAM stage starts, a static buffer is used to store the console output, as the CBMEM buffer location is not known. Then, when CBMEM is reinitialized, cbmemc_reinit() again takes care of the copying. In case the allocated buffers are not large enough, the excessive data is dropped, and the copying routine adds some text to the output buffer to indicate that there has been data lost and how many characters were dropped. Change-Id: I8c126e31db6cb2141f7f4f97c5047f39a8db44fc Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/719 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2011-09-30 02:27:15 +02:00
copy_size);
cursor += copy_size;
CBMEM console: Prevent buffer overrun Make sure memcpy target and a possible message telling log was truncated stay within the allocated region for CBMEM console. This fixes observed CBMEM corruption on platforms that do not use CBMEM console during romstage. Those platforms will need an additional fix to reset cursor position to zero on s3 resume. Change-Id: I76501ca3afc716545ca76ebca1119995126a43f8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4292 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-11-27 16:51:31 +01:00
if (dropped_chars) {
CBMEM CONSOLE: Add CBMEM console driver implementation. The CBMEM console driver saves console output in a CBMEM area, which then is made available to Linux applications for perusing. There are some system limitations which need to be worked around to achieve this goal: - some console traffic is generated before DRAM is initialized, leave alone CBMEM initialized. - after the RAM based stage starts, a lot of traffic is generated before CBMEM is initialized. As a result, the console log lives in three different places - the bottom of the cache as RAM space, the CBMEM buffer (where it is expected to be) and a static buffer used early in the RAM stage. When execution starts (in the cache as RAM mode), the console buffer is allocated at the bottom of the cache as RAM memory address range. Once DRAM is initialized, the CBMEM structure is initialized, and then the console buffer contents are copied from the bottom of the cache as RAM space into the CBMEM area right before the cache as RAM mode is disabled. The src/lib/cbmem_console.c:cbmemc_reinit() takes care of the copying. At this point the cache as RAM memory is about to be disabled, but the ROM stage is still going generating console output. To make sure this output is not lost, cbmemc_reinit() saves the new buffer address at a fixed location (0x600 was chosen for this), and the actual "printing" function checks to see if the RAM is already initialized (the stack is in RAM), and if so, gets the console buffer pointer from this location instead of using the cache as RAM address. When the RAM stage starts, a static buffer is used to store the console output, as the CBMEM buffer location is not known. Then, when CBMEM is reinitialized, cbmemc_reinit() again takes care of the copying. In case the allocated buffers are not large enough, the excessive data is dropped, and the copying routine adds some text to the output buffer to indicate that there has been data lost and how many characters were dropped. Change-Id: I8c126e31db6cb2141f7f4f97c5047f39a8db44fc Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/719 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2011-09-30 02:27:15 +02:00
const char loss_str1[] = "\n\n*** Log truncated, ";
const char loss_str2[] = " characters dropped. ***\n\n";
/*
* When running from ROM sprintf is not available, a simple
* itoa implementation is used instead.
*/
int got_first_digit = 0;
/* Way more than possible number of dropped characters. */
u32 mult = 100000;
strcpy((char *)new_cons_p->buffer_body + cursor, loss_str1);
cursor += sizeof(loss_str1) - 1;
while (mult) {
int digit = dropped_chars / mult;
if (got_first_digit || digit) {
new_cons_p->buffer_body[cursor++] = digit + '0';
dropped_chars %= mult;
/* Excessive, but keeps it simple */
got_first_digit = 1;
}
mult /= 10;
}
strcpy((char *)new_cons_p->buffer_body + cursor, loss_str2);
cursor += sizeof(loss_str2) - 1;
}
new_cons_p->buffer_cursor = cursor;
}
CBMEM: Always select CAR_MIGRATION If romstage does not make cbmem_initialize() call, linker should optimize the code for CAR migration away. This simplifies design of CBMEM console by a considerable amount. As console buffer is now migrated within cbmem_initialize() call there is no longer need for cbmemc_reinit() call made at end of romstage. Change-Id: I8675ecaafb641fa02675e9ba3f374caa8e240f1d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3916 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-09 23:07:21 +02:00
void cbmemc_reinit(void)
CBMEM CONSOLE: Add CBMEM console driver implementation. The CBMEM console driver saves console output in a CBMEM area, which then is made available to Linux applications for perusing. There are some system limitations which need to be worked around to achieve this goal: - some console traffic is generated before DRAM is initialized, leave alone CBMEM initialized. - after the RAM based stage starts, a lot of traffic is generated before CBMEM is initialized. As a result, the console log lives in three different places - the bottom of the cache as RAM space, the CBMEM buffer (where it is expected to be) and a static buffer used early in the RAM stage. When execution starts (in the cache as RAM mode), the console buffer is allocated at the bottom of the cache as RAM memory address range. Once DRAM is initialized, the CBMEM structure is initialized, and then the console buffer contents are copied from the bottom of the cache as RAM space into the CBMEM area right before the cache as RAM mode is disabled. The src/lib/cbmem_console.c:cbmemc_reinit() takes care of the copying. At this point the cache as RAM memory is about to be disabled, but the ROM stage is still going generating console output. To make sure this output is not lost, cbmemc_reinit() saves the new buffer address at a fixed location (0x600 was chosen for this), and the actual "printing" function checks to see if the RAM is already initialized (the stack is in RAM), and if so, gets the console buffer pointer from this location instead of using the cache as RAM address. When the RAM stage starts, a static buffer is used to store the console output, as the CBMEM buffer location is not known. Then, when CBMEM is reinitialized, cbmemc_reinit() again takes care of the copying. In case the allocated buffers are not large enough, the excessive data is dropped, and the copying routine adds some text to the output buffer to indicate that there has been data lost and how many characters were dropped. Change-Id: I8c126e31db6cb2141f7f4f97c5047f39a8db44fc Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/719 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2011-09-30 02:27:15 +02:00
{
CBMEM console: Support late init It is not compulsory to have CBMEM console initialised in romstage, so try add the CBMEM table entry again in ramstage, if not found. Change-Id: I96ab502df7f05d6bf1d6e6fa84d395ef6306b525 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3915 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-09 00:31:22 +02:00
struct cbmem_console *cbm_cons_p = NULL;
CBMEM console: Fix and enhance pre-RAM support Use the value of CONSOLE_PRERAM_BUFFER_SIZE to determine if we can do CBMEM console in bootblock and romstage. Kconfig forces it to zero if _BASE is unset or we cannot do CAR migration on x86. Add CBMEM console to bootblock, except for x86. Only one of bootblock and romstage clears the pre-RAM buffer. To start with empty console log on S3 wakeup, ramstage now clears previous contents of CBMEM buffer if there was no pre-RAM buffer. Unify Kconfig variable naming. TODO: ARM configurations do not define PRERAM_BUFFER_BASE values. Change-Id: I70d82da629529dbfd7bc9491223abd703cbc0115 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7862 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-12-21 07:55:47 +01:00
int flags = CBMEMC_APPEND;
CBMEM console: Support late init It is not compulsory to have CBMEM console initialised in romstage, so try add the CBMEM table entry again in ramstage, if not found. Change-Id: I96ab502df7f05d6bf1d6e6fa84d395ef6306b525 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3915 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-09 00:31:22 +02:00
CBMEM console: Fix and enhance pre-RAM support Use the value of CONSOLE_PRERAM_BUFFER_SIZE to determine if we can do CBMEM console in bootblock and romstage. Kconfig forces it to zero if _BASE is unset or we cannot do CAR migration on x86. Add CBMEM console to bootblock, except for x86. Only one of bootblock and romstage clears the pre-RAM buffer. To start with empty console log on S3 wakeup, ramstage now clears previous contents of CBMEM buffer if there was no pre-RAM buffer. Unify Kconfig variable naming. TODO: ARM configurations do not define PRERAM_BUFFER_BASE values. Change-Id: I70d82da629529dbfd7bc9491223abd703cbc0115 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7862 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-12-21 07:55:47 +01:00
if (ENV_ROMSTAGE && (CONFIG_CONSOLE_PRERAM_BUFFER_SIZE == 0))
CBMEM console: Fix boards with BROKEN_CAR_MIGRATE There is no need to call cbmemc_reinit() exclusively in romstage, that is done as part of the CAR migration of cbmem_recovery(). CBMEM console for romstage remains disabled for boards flagged with BROKEN_CAR_MIGRATE, but with this change it is possible to have it for ramstage. Change-Id: I48c4afcd847d0d5f8864d23c0786935341e3f752 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7592 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-11-28 09:13:03 +01:00
return;
CBMEM CONSOLE: Add CBMEM console driver implementation. The CBMEM console driver saves console output in a CBMEM area, which then is made available to Linux applications for perusing. There are some system limitations which need to be worked around to achieve this goal: - some console traffic is generated before DRAM is initialized, leave alone CBMEM initialized. - after the RAM based stage starts, a lot of traffic is generated before CBMEM is initialized. As a result, the console log lives in three different places - the bottom of the cache as RAM space, the CBMEM buffer (where it is expected to be) and a static buffer used early in the RAM stage. When execution starts (in the cache as RAM mode), the console buffer is allocated at the bottom of the cache as RAM memory address range. Once DRAM is initialized, the CBMEM structure is initialized, and then the console buffer contents are copied from the bottom of the cache as RAM space into the CBMEM area right before the cache as RAM mode is disabled. The src/lib/cbmem_console.c:cbmemc_reinit() takes care of the copying. At this point the cache as RAM memory is about to be disabled, but the ROM stage is still going generating console output. To make sure this output is not lost, cbmemc_reinit() saves the new buffer address at a fixed location (0x600 was chosen for this), and the actual "printing" function checks to see if the RAM is already initialized (the stack is in RAM), and if so, gets the console buffer pointer from this location instead of using the cache as RAM address. When the RAM stage starts, a static buffer is used to store the console output, as the CBMEM buffer location is not known. Then, when CBMEM is reinitialized, cbmemc_reinit() again takes care of the copying. In case the allocated buffers are not large enough, the excessive data is dropped, and the copying routine adds some text to the output buffer to indicate that there has been data lost and how many characters were dropped. Change-Id: I8c126e31db6cb2141f7f4f97c5047f39a8db44fc Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/719 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2011-09-30 02:27:15 +02:00
CBMEM console: Fix and enhance pre-RAM support Use the value of CONSOLE_PRERAM_BUFFER_SIZE to determine if we can do CBMEM console in bootblock and romstage. Kconfig forces it to zero if _BASE is unset or we cannot do CAR migration on x86. Add CBMEM console to bootblock, except for x86. Only one of bootblock and romstage clears the pre-RAM buffer. To start with empty console log on S3 wakeup, ramstage now clears previous contents of CBMEM buffer if there was no pre-RAM buffer. Unify Kconfig variable naming. TODO: ARM configurations do not define PRERAM_BUFFER_BASE values. Change-Id: I70d82da629529dbfd7bc9491223abd703cbc0115 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7862 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-12-21 07:55:47 +01:00
/* If CBMEM entry already existed, old contents is not altered. */
cbm_cons_p = cbmem_add(CBMEM_ID_CONSOLE,
CONFIG_CONSOLE_CBMEM_BUFFER_SIZE);
CBMEM CONSOLE: Add CBMEM console driver implementation. The CBMEM console driver saves console output in a CBMEM area, which then is made available to Linux applications for perusing. There are some system limitations which need to be worked around to achieve this goal: - some console traffic is generated before DRAM is initialized, leave alone CBMEM initialized. - after the RAM based stage starts, a lot of traffic is generated before CBMEM is initialized. As a result, the console log lives in three different places - the bottom of the cache as RAM space, the CBMEM buffer (where it is expected to be) and a static buffer used early in the RAM stage. When execution starts (in the cache as RAM mode), the console buffer is allocated at the bottom of the cache as RAM memory address range. Once DRAM is initialized, the CBMEM structure is initialized, and then the console buffer contents are copied from the bottom of the cache as RAM space into the CBMEM area right before the cache as RAM mode is disabled. The src/lib/cbmem_console.c:cbmemc_reinit() takes care of the copying. At this point the cache as RAM memory is about to be disabled, but the ROM stage is still going generating console output. To make sure this output is not lost, cbmemc_reinit() saves the new buffer address at a fixed location (0x600 was chosen for this), and the actual "printing" function checks to see if the RAM is already initialized (the stack is in RAM), and if so, gets the console buffer pointer from this location instead of using the cache as RAM address. When the RAM stage starts, a static buffer is used to store the console output, as the CBMEM buffer location is not known. Then, when CBMEM is reinitialized, cbmemc_reinit() again takes care of the copying. In case the allocated buffers are not large enough, the excessive data is dropped, and the copying routine adds some text to the output buffer to indicate that there has been data lost and how many characters were dropped. Change-Id: I8c126e31db6cb2141f7f4f97c5047f39a8db44fc Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/719 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2011-09-30 02:27:15 +02:00
CBMEM console: Fix and enhance pre-RAM support Use the value of CONSOLE_PRERAM_BUFFER_SIZE to determine if we can do CBMEM console in bootblock and romstage. Kconfig forces it to zero if _BASE is unset or we cannot do CAR migration on x86. Add CBMEM console to bootblock, except for x86. Only one of bootblock and romstage clears the pre-RAM buffer. To start with empty console log on S3 wakeup, ramstage now clears previous contents of CBMEM buffer if there was no pre-RAM buffer. Unify Kconfig variable naming. TODO: ARM configurations do not define PRERAM_BUFFER_BASE values. Change-Id: I70d82da629529dbfd7bc9491223abd703cbc0115 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7862 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-12-21 07:55:47 +01:00
/* Clear old contents of CBMEM buffer. */
if (ENV_ROMSTAGE || (CONFIG_CONSOLE_PRERAM_BUFFER_SIZE == 0))
flags |= CBMEMC_RESET;
CBMEM CONSOLE: Add CBMEM console driver implementation. The CBMEM console driver saves console output in a CBMEM area, which then is made available to Linux applications for perusing. There are some system limitations which need to be worked around to achieve this goal: - some console traffic is generated before DRAM is initialized, leave alone CBMEM initialized. - after the RAM based stage starts, a lot of traffic is generated before CBMEM is initialized. As a result, the console log lives in three different places - the bottom of the cache as RAM space, the CBMEM buffer (where it is expected to be) and a static buffer used early in the RAM stage. When execution starts (in the cache as RAM mode), the console buffer is allocated at the bottom of the cache as RAM memory address range. Once DRAM is initialized, the CBMEM structure is initialized, and then the console buffer contents are copied from the bottom of the cache as RAM space into the CBMEM area right before the cache as RAM mode is disabled. The src/lib/cbmem_console.c:cbmemc_reinit() takes care of the copying. At this point the cache as RAM memory is about to be disabled, but the ROM stage is still going generating console output. To make sure this output is not lost, cbmemc_reinit() saves the new buffer address at a fixed location (0x600 was chosen for this), and the actual "printing" function checks to see if the RAM is already initialized (the stack is in RAM), and if so, gets the console buffer pointer from this location instead of using the cache as RAM address. When the RAM stage starts, a static buffer is used to store the console output, as the CBMEM buffer location is not known. Then, when CBMEM is reinitialized, cbmemc_reinit() again takes care of the copying. In case the allocated buffers are not large enough, the excessive data is dropped, and the copying routine adds some text to the output buffer to indicate that there has been data lost and how many characters were dropped. Change-Id: I8c126e31db6cb2141f7f4f97c5047f39a8db44fc Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/719 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2011-09-30 02:27:15 +02:00
CBMEM console: Fix and enhance pre-RAM support Use the value of CONSOLE_PRERAM_BUFFER_SIZE to determine if we can do CBMEM console in bootblock and romstage. Kconfig forces it to zero if _BASE is unset or we cannot do CAR migration on x86. Add CBMEM console to bootblock, except for x86. Only one of bootblock and romstage clears the pre-RAM buffer. To start with empty console log on S3 wakeup, ramstage now clears previous contents of CBMEM buffer if there was no pre-RAM buffer. Unify Kconfig variable naming. TODO: ARM configurations do not define PRERAM_BUFFER_BASE values. Change-Id: I70d82da629529dbfd7bc9491223abd703cbc0115 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7862 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-12-21 07:55:47 +01:00
init_console_ptr(cbm_cons_p,
CONFIG_CONSOLE_CBMEM_BUFFER_SIZE, flags);
CBMEM CONSOLE: Add CBMEM console driver implementation. The CBMEM console driver saves console output in a CBMEM area, which then is made available to Linux applications for perusing. There are some system limitations which need to be worked around to achieve this goal: - some console traffic is generated before DRAM is initialized, leave alone CBMEM initialized. - after the RAM based stage starts, a lot of traffic is generated before CBMEM is initialized. As a result, the console log lives in three different places - the bottom of the cache as RAM space, the CBMEM buffer (where it is expected to be) and a static buffer used early in the RAM stage. When execution starts (in the cache as RAM mode), the console buffer is allocated at the bottom of the cache as RAM memory address range. Once DRAM is initialized, the CBMEM structure is initialized, and then the console buffer contents are copied from the bottom of the cache as RAM space into the CBMEM area right before the cache as RAM mode is disabled. The src/lib/cbmem_console.c:cbmemc_reinit() takes care of the copying. At this point the cache as RAM memory is about to be disabled, but the ROM stage is still going generating console output. To make sure this output is not lost, cbmemc_reinit() saves the new buffer address at a fixed location (0x600 was chosen for this), and the actual "printing" function checks to see if the RAM is already initialized (the stack is in RAM), and if so, gets the console buffer pointer from this location instead of using the cache as RAM address. When the RAM stage starts, a static buffer is used to store the console output, as the CBMEM buffer location is not known. Then, when CBMEM is reinitialized, cbmemc_reinit() again takes care of the copying. In case the allocated buffers are not large enough, the excessive data is dropped, and the copying routine adds some text to the output buffer to indicate that there has been data lost and how many characters were dropped. Change-Id: I8c126e31db6cb2141f7f4f97c5047f39a8db44fc Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/719 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2011-09-30 02:27:15 +02:00
}
CBMEM: Always select CAR_MIGRATION If romstage does not make cbmem_initialize() call, linker should optimize the code for CAR migration away. This simplifies design of CBMEM console by a considerable amount. As console buffer is now migrated within cbmem_initialize() call there is no longer need for cbmemc_reinit() call made at end of romstage. Change-Id: I8675ecaafb641fa02675e9ba3f374caa8e240f1d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3916 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-09 23:07:21 +02:00
/* Call cbmemc_reinit() at CAR migration time. */
CAR_MIGRATE(cbmemc_reinit)