coreboot-kgpe-d16/payloads/libpayload/drivers/storage/ahci.c

291 lines
8.5 KiB
C
Raw Normal View History

/*
* This file is part of the libpayload project.
*
* Copyright (C) 2012 secunet Security Networks AG
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
//#define DEBUG_STATUS
#include <stdlib.h>
#include <stdint.h>
#include <string.h>
#include <libpayload.h>
#include <pci.h>
#include <storage/ata.h>
#include <storage/ahci.h>
#include "ahci_private.h"
#ifdef DEBUG_STATUS
static inline u32 _ahci_clear_status(volatile u32 *const reg,
const char *const r,
const char *const f)
{
const u32 bits = *reg;
if (bits)
*reg = bits;
printf("ahci: %s: %s == 0x%08x\n", f, r, bits);
return bits;
}
#define ahci_clear_status(p, r) _ahci_clear_status(&(p)->r, #r, __func__)
#else
static inline u32 _ahci_clear_status(volatile u32 *const reg)
{
const u32 bits = *reg;
if (bits)
*reg = bits;
return bits;
}
#define ahci_clear_status(p, r) _ahci_clear_status(&(p)->r)
#endif
static inline int ahci_port_is_active(const hba_port_t *const port)
{
return (port->sata_status & (HBA_PxSSTS_IPM_MASK | HBA_PxSSTS_DET_MASK))
== (HBA_PxSSTS_IPM_ACTIVE | HBA_PxSSTS_DET_ESTABLISHED);
}
/** Do minimal error recovery. */
int ahci_error_recovery(ahci_dev_t *const dev, const u32 intr_status)
{
/* Command engine has to be restarted.
We don't call ahci_cmdengine_stop() here as it also checks
HBA_PxCMD_FR which won't clear on fatal errors. */
dev->port->cmd_stat &= ~HBA_PxCMD_ST;
/* Always clear sata_error. */
ahci_clear_status(dev->port, sata_error);
/* Perform COMRESET if appropriate. */
const u32 tfd = dev->port->taskfile_data;
if ((tfd & (HBA_PxTFD_BSY | HBA_PxTFD_DRQ)) |
(intr_status & HBA_PxIS_PCS)) {
const u32 sctl = dev->port->sata_control & ~HBA_PxSCTL_DET_MASK;
dev->port->sata_control = sctl | HBA_PxSCTL_DET_COMRESET;
mdelay(1);
dev->port->sata_control = sctl;
}
if (ahci_port_is_active(dev->port))
/* Start command engine. */
return ahci_cmdengine_start(dev->port);
else
return -1;
}
static int ahci_dev_init(hba_ctrl_t *const ctrl,
hba_port_t *const port,
const int portnum)
{
int ret = 1;
const int ncs = HBA_CAPS_DECODE_NCS(ctrl->caps);
/* Allocate command list, one command table and received FIS. */
cmd_t *const cmdlist = memalign(1024, ncs * sizeof(cmd_t));
cmdtable_t *const cmdtable = memalign(128, sizeof(cmdtable_t));
rcvd_fis_t *const rcvd_fis = memalign(256, sizeof(rcvd_fis_t));
/* Allocate our device structure. */
ahci_dev_t *const dev = calloc(1, sizeof(ahci_dev_t));
if (!cmdlist || !cmdtable || !rcvd_fis || !dev)
goto _cleanup_ret;
memset((void *)cmdlist, '\0', ncs * sizeof(cmd_t));
memset((void *)cmdtable, '\0', sizeof(*cmdtable));
memset((void *)rcvd_fis, '\0', sizeof(*rcvd_fis));
/* Set command list base and received FIS base. */
if (ahci_cmdengine_stop(port))
return 1;
port->cmdlist_base = virt_to_phys(cmdlist);
port->frameinfo_base = virt_to_phys(rcvd_fis);
if (ahci_cmdengine_start(port))
return 1;
/* Put port into active state. */
port->cmd_stat |= HBA_PxCMD_ICC_ACTIVE;
dev->ctrl = ctrl;
dev->port = port;
dev->cmdlist = cmdlist;
dev->cmdtable = cmdtable;
dev->rcvd_fis = rcvd_fis;
/*
* Wait for D2H Register FIS with device' signature.
* The drive has to spin up here, so wait up to 30s.
*/
const int timeout_s = 30; /* Time out after 30s. */
int timeout = timeout_s * 100;
while ((port->taskfile_data & HBA_PxTFD_BSY) && timeout--)
mdelay(10);
if (port->taskfile_data & HBA_PxTFD_BSY)
printf("ahci: Timed out after %d seconds "
"of waiting for device to spin up.\n", timeout_s);
/* Initialize device or fall through to clean up. */
switch (port->signature) {
case HBA_PxSIG_ATA:
printf("ahci: ATA drive on port #%d.\n", portnum);
#if IS_ENABLED(CONFIG_LP_STORAGE_ATA)
dev->ata_dev.identify = ahci_identify_device;
dev->ata_dev.read_sectors = ahci_ata_read_sectors;
return ata_attach_device(&dev->ata_dev, PORT_TYPE_SATA);
#endif
break;
case HBA_PxSIG_ATAPI:
printf("ahci: ATAPI drive on port #%d.\n", portnum);
#if IS_ENABLED(CONFIG_LP_STORAGE_ATAPI)
dev->atapi_dev.identify = ahci_identify_device;
dev->atapi_dev.packet_read_cmd = ahci_packet_read_cmd;
return atapi_attach_device(&dev->atapi_dev, PORT_TYPE_SATA);
#endif
break;
default:
printf("ahci: Unsupported device (signature == 0x%08x) "
"on port #%d.\n", port->signature, portnum);
break;
}
ret = 2;
_cleanup_ret:
/* Clean up (not reached for initialized devices). */
if (dev)
free(dev);
if (!ahci_cmdengine_stop(port)) {
port->cmdlist_base = 0;
port->frameinfo_base = 0;
if (rcvd_fis)
free((void *)rcvd_fis);
if (cmdtable)
free((void *)cmdtable);
if (cmdlist)
free((void *)cmdlist);
}
return ret;
}
static void ahci_port_probe(hba_ctrl_t *const ctrl,
hba_port_t *const port,
const int portnum)
{
/* If staggered spin-up is supported, spin-up device. */
if (ctrl->caps & HBA_CAPS_SSS) {
port->cmd_stat |= HBA_PxCMD_SUD;
}
/* Wait 1s if we just told the device to spin up or
if it's the first port. */
if ((ctrl->caps & HBA_CAPS_SSS) ||
!(ctrl->ports_impl & ((1 << (portnum - 1)) - 1))) {
/* Wait for port to become active. */
int timeout = 100; /* Time out after 100 * 100us == 10ms. */
while (!ahci_port_is_active(port) && timeout--)
udelay(100);
}
if (!ahci_port_is_active(port))
return;
ahci_clear_status(port, sata_error);
ahci_clear_status(port, intr_status);
ahci_dev_init(ctrl, port, portnum);
}
#if IS_ENABLED(CONFIG_LP_STORAGE_AHCI_ONLY_TESTED)
static u32 working_controllers[] = {
0x8086 | 0x2929 << 16, /* Mobile ICH9 */
0x8086 | 0x1e03 << 16, /* Mobile Panther Point PCH */
};
#endif
static void ahci_init_pci(pcidev_t dev)
{
int i;
const u16 class = pci_read_config16(dev, 0xa);
if (class != 0x0106)
return;
const u16 vendor = pci_read_config16(dev, 0x00);
const u16 device = pci_read_config16(dev, 0x02);
#if IS_ENABLED(CONFIG_LP_STORAGE_AHCI_ONLY_TESTED)
const u32 vendor_device = pci_read_config32(dev, 0x0);
for (i = 0; i < ARRAY_SIZE(working_controllers); ++i)
if (vendor_device == working_controllers[i])
break;
if (i == ARRAY_SIZE(working_controllers)) {
printf("ahci: Not using untested SATA controller "
"%02x:%02x.%02x (%04x:%04x).\n", PCI_BUS(dev),
PCI_SLOT(dev), PCI_FUNC(dev), vendor, device);
return;
}
#endif
printf("ahci: Found SATA controller %02x:%02x.%02x (%04x:%04x).\n",
PCI_BUS(dev), PCI_SLOT(dev), PCI_FUNC(dev), vendor, device);
hba_ctrl_t *const ctrl = phys_to_virt(
pci_read_config32(dev, 0x24) & ~0x3ff);
hba_port_t *const ports = ctrl->ports;
/* Reset host controller. */
ctrl->global_ctrl |= HBA_CTRL_RESET;
/* Reset has to be finished after 1s. */
delay(1);
if (ctrl->global_ctrl & HBA_CTRL_RESET) {
printf("ahci: ERROR: "
"Controller reset didn't finish within 1s.\n");
return;
}
/* Set AHCI access mode. */
ctrl->global_ctrl |= HBA_CTRL_AHCI_EN;
/* Probe for devices. */
for (i = 0; i < 32; ++i) {
if (ctrl->ports_impl & (1 << i))
ahci_port_probe(ctrl, &ports[i], i + 1);
}
}
void ahci_initialize(void)
{
int bus, dev, func;
for (bus = 0; bus < 256; ++bus) {
for (dev = 0; dev < 32; ++dev) {
const u16 class =
pci_read_config16(PCI_DEV(bus, dev, 0), 0xa);
if (class != 0xffff) {
for (func = 0; func < 8; ++func)
ahci_init_pci(PCI_DEV(bus, dev, func));
}
}
}
}