GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
coreboot-kgpe-d16/util/cbfstool/default-x86.fmd

21 lines
553 B
Plaintext
Raw Normal View History

build system: Switch to fmap based firmware layout We still add a master header for compatibility purposes, and the default layouts don't cover anything non-coreboot (eg. IFD regions) yet. The default layouts can be overridden by specifying an fmd file, from which the fmap is generated. Future work: - map IFD regions to fmap regions - non-x86: build minimalistic trampolines that jump into the first cbfs file, so the bootblock can be part of CBFS instead of reserving a whole 64K for it. - teach coreboot's cbfs code to work without the master header - teach coreboot's cbfs code to work on different fmap regions Change-Id: Id1085dcd5107cf0e02e8dc1e77dc0dd9497a819c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/11692 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-09-16 18:10:52 +02:00
# layout for firmware residing at top of 4GB address space
# +-------------+ <-- 4GB - ROM_SIZE / start of flash
# | unspecified |
# +-------------+ <-- 4GB - BIOS_SIZE
# | FMAP |
# +-------------+ <-- 4GB - BIOS_SIZE + FMAP_SIZE
# | CBFS |
# +-------------+ <-- 4GB / end of flash
FLASH@##ROM_BASE## ##ROM_SIZE## {
BIOS@##BIOS_BASE## ##BIOS_SIZE## {
console/flashsconsole: Add spi flash console for debugging If CONSOLE_SPI_FLASH config is enabled, we write the cbmem messages to the 'CONSOLE' area in FMAP which allows us to grab the log when we read the flash. This is useful when you don't have usb debugging, and UART lines are hard to find. Since a failure to boot would require a hardware flasher anyways, we can get the log at the same time. This feature should only be used when no alternative is found and only when we can't boot the system, because excessive writes to the flash is not recommended. This has been tested on purism/librem13 v2 and librem 15 v3 which run Intel Skylake hardware. It has not been tested on other archs or with a driver other than the fast_spi. Change-Id: I74a297b94f6881d8c27cbe5168f161d8331c3df3 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/19849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-11 16:36:29 +02:00
##CONSOLE_ENTRY##
drivers/mrc_cache: Always generate an FMAP region This automatically generates an FMAP region for the MRC_CACHE driver which is easier to handle than a cbfsfile. Adds some spaces and more comments to Makefile.inc to improve readability. Tested on Thinkpad x200 with some proof of concept patches. Change-Id: Iaaca36b1123b094ec1bbe5df4fb25660919173ca Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23150 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-01-07 23:12:49 +01:00
##MRC_CACHE_ENTRY##
Makefile.inc: Create a default SMMSTORE region Change-Id: I7b7b75050e0139ea9a0a4f2ad3c0d69a482fb38b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30421 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-12-25 03:00:34 +01:00
##SMMSTORE_ENTRY##
src/lib: Add Kconfig option for SPD cache in FMAP Currently, the option to cache DIMM SPD data in an FMAP region is closely coupled to a single board (google/hatch) and requires a custom FMAP to utilize. Loosen this coupling by introducing a Kconfig option which adds a correctly sized and aligned RW_SPD_CACHE region to the default FMAP. Add a Kconfig option for the region name, replacing the existing hard- coded instance in spd_cache.h. Change the inclusion of spd_cache.c to use this new Kconfig, rather than the board-specific one currently used. Lastly, have google/hatch select the new Kconfig when appropriate to ensure no change in current functionality. Test: build/boot WYVERN google/hatch variant with default FMAP, verify FMAP contains RW_SPD_CACHE, verify SPD cache used via cbmem log. Also tested on an out-of-tree Purism board. Change-Id: Iee0e7acb01e238d7ed354e3dbab1207903e3a4fc Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48520 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-30 21:30:15 +01:00
##SPD_CACHE_ENTRY##
drivers/vpd: Add VPD region to default FMAP when selected Currently, use of the VPD driver to read VPD tables from flash requires the use of a custom FMAP with one or more VPD regions. Extend this funtionality to boards using the default FMAP by creating a dedicated VPD region when the driver is selected. Test: build qemu target with CONFIG_VPD selected, verify entry added to build/fmap.fmd. Change-Id: Ie9e3c7cf11a6337a43223a6037632a4d9c84d988 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49049 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-01 21:08:29 +01:00
##VPD_ENTRY##
Makefile.inc: Optimize generating the default x86 fmap Put the FMAP FMAP region right above the coreboot CBFS region. The other regions like RW_MRC_CACHE and CONSOLE often have alignment requirements so it makes sense to put those on top. This also simplifies the code the generate the default fmap a little. Change-Id: I24fa6c89ecf85fb9002c0357f14aa970ee51b1df Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30419 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-25 02:31:48 +01:00
FMAP@##FMAP_BASE## ##FMAP_SIZE##
build system: Switch to fmap based firmware layout We still add a master header for compatibility purposes, and the default layouts don't cover anything non-coreboot (eg. IFD regions) yet. The default layouts can be overridden by specifying an fmd file, from which the fmap is generated. Future work: - map IFD regions to fmap regions - non-x86: build minimalistic trampolines that jump into the first cbfs file, so the bootblock can be part of CBFS instead of reserving a whole 64K for it. - teach coreboot's cbfs code to work without the master header - teach coreboot's cbfs code to work on different fmap regions Change-Id: Id1085dcd5107cf0e02e8dc1e77dc0dd9497a819c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/11692 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-09-16 18:10:52 +02:00
COREBOOT(CBFS)@##CBFS_BASE## ##CBFS_SIZE##
}
}