coreboot-kgpe-d16/payloads/libpayload/arch/arm/Makefile.inc

51 lines
2.1 KiB
PHP
Raw Normal View History

##
##
## Copyright (C) 2008 Advanced Micro Devices, Inc.
##
## Redistribution and use in source and binary forms, with or without
## modification, are permitted provided that the following conditions
## are met:
## 1. Redistributions of source code must retain the above copyright
## notice, this list of conditions and the following disclaimer.
## 2. Redistributions in binary form must reproduce the above copyright
## notice, this list of conditions and the following disclaimer in the
## documentation and/or other materials provided with the distribution.
## 3. The name of the author may not be used to endorse or promote products
## derived from this software without specific prior written permission.
##
## THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
## ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
## IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
## ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
## FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
## DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
## OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
## HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
## LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
## OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
## SUCH DAMAGE.
##
arm: Thumb ALL the things! This patch switches every last part of Coreboot on ARM over to Thumb mode: libpayload, the internal libgcc, and assorted assembly files. In combination with the respective depthcharge patch, this will switch to Thumb mode right after the entry point of the bootblock and not switch back to ARM until the final assembly stub that jumps to the kernel. The required changes to make this work include some new headers and Makefile flags to handle assembly files (using the unified syntax and the same helper macros as Linux), modifying our custom-written libgcc code for 64-bit division to support Thumb (removing some stale old files that were never really used for clarity), and flipping the general CFLAGS to Thumb (some more cleanup there as well while I'm at it). BUG=None TEST=Snow and Nyan still boot. Original-Change-Id: I80c04281e3adbf74f9f477486a96b9fafeb455b3 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/182212 Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 5f65c17cbfae165a95354146ae79e06c512c2c5a) Conflicts: payloads/libpayload/include/arm/arch/asm.h src/arch/arm/Makefile.inc src/arch/arm/armv7/Makefile.inc *** There is an issue with what to do with ramstage-S-ccopts, and *** will need to be covered in additional ARM cleanup patches. Change-Id: I80c04281e3adbf74f9f477486a96b9fafeb455b3 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/6930 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-01-13 22:24:30 +01:00
CFLAGS += -mthumb -march=armv7-a
arm_asm_flags = -Wa,-mthumb -Wa,-mimplicit-it=always -Wa,-mno-warn-deprecated
head.o-y += head.S
libc-y += eabi_compat.c
libc-y += main.c sysinfo.c
libc-y += timer.c coreboot.c util.S
libc-y += virtual.c
libc-y += exception_asm.S exception.c
libc-y += cache.c cpu.S
libc-y += selfboot.c
libpayload: Introduce new Kconfig to explicitly allow GPL code There have been leaks of GPL code into libpayload for a while now, for new features or improvements that require third party code with no adequate alternative among BSD-licensed software. It seems silly and counter-productive to keep holding back features and performance improvements from libpayload for a use-case (proprietary payloads) that doesn't even seem to be implemented anywhere to date. Open-source payloads should not need to suffer to appease commercial ones. Instead, this patch introduces a new Kconfig option to explicitly allow inclusion of GPL code. It will use Kconfig dependencies and/or Makefile rules to ensure that no GPL code can end up in the final payload if that option is unset, allowing proprietary payloads to keep working with the existing BSD-licensed feature set. New features and patches (that are sufficiently separate and self-contained to allow guarding through this config option) can choose whether to import GPL code, and need to depend on this option if they do. Also clean up all (known) existing uses of GPL code to depend on the new option, add some recent third-party imports to the LICENSES file, and relicense the selfboot.c files to BSD with permission of the author. BUG=chrome-os-partner:24957 TEST=Compiled Falco and Nyan_Big both with and without the new option, disassembled output binaries to ensure that memcpy() looks as expected. Original-Change-Id: I6e3a75b1a8e46291c75a876844c7a01f7d3f2a0e Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/203513 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit d8e5a9fdf583b5ac861f34baea6a16c4d8536512) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I446fef028264c793b946dd9f765e446bf708b4db Reviewed-on: http://review.coreboot.org/8118 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-06-11 23:16:35 +02:00
# Will fall back to default_memXXX() in libc/memory.c if GPL not allowed.
libc-$(CONFIG_LP_GPL) += memcpy.S memset.S memmove.S
libpayload: Add remote GDB support This patch adds the ability to attach a GDB host through the UART to a running payload. Libpayload implements a small stub that can parse and respond to the GDB remote protocol and provide the required primitives (reading/writing registers/memory, etc.) to allow GDB to control execution. The goal of this implementation is to be as small and uninvasive as possible. It implements only the minimum amount of primitives required, and relies on GDB's impressive workaround capabilities (such as emulating breakpoints by temporarily replacing instructions) for the more complicated features. This way, a relatively tiny amount of code on the firmware side opens a vast range of capabilities to the user, not just in debugging but also in remote-controlling the firmware to change its behavior (e.g. through GDBs ability to modify variables and call functions). By default, a system with the REMOTEGDB Kconfig will only trap into GDB when executing halt() (including the calls from die_if(), assert(), and exception handlers). In addition, payloads can manually call gdb_enter() if desired. It will print a final "Ready for GDB connection." on the serial, detach the normal serial output driver and wait for the commands that GDB starts sending on attach. Based on original implementation by Gabe Black <gabeblack@chromium.org>. BUG=chrome-os-partner:18390 TEST=Boot a GDB enabled image in recovery mode (or get it to hit a halt()), close your terminal, execute '<toolchain>-gdb --symbols /build/<board>/firmware/depthcharge_gdb/depthcharge.elf --directory ~/trunk/src/third_party/coreboot/payloads/libpayload --directory ~/trunk/src/platform/depthcharge --directory ~/trunk/src/platform/vboot_reference --ex "target remote <cpu_uart_pty>"' and behold the magic. (You can also SIGSTOP your terminal's parent shell and the terminal itself, and SIGCONT them in reverse order after GDB exits. More convenient wrapper tools to do all this automatically coming soon.) Original-Change-Id: Ib440d1804126cdfdac4a8801f5015b4487e25269 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/202563 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 9c4a642c7be2faf122fef39bdfaddd64aec68b77) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I9238b4eb19d3ab2c98e4e1c5946cd7d252ca3c3b Reviewed-on: http://review.coreboot.org/8119 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-05-15 20:57:38 +02:00
libgdb-y += gdb.c
libcbfs-$(CONFIG_LP_CBFS) += dummy_media.c
arm: Thumb ALL the things! This patch switches every last part of Coreboot on ARM over to Thumb mode: libpayload, the internal libgcc, and assorted assembly files. In combination with the respective depthcharge patch, this will switch to Thumb mode right after the entry point of the bootblock and not switch back to ARM until the final assembly stub that jumps to the kernel. The required changes to make this work include some new headers and Makefile flags to handle assembly files (using the unified syntax and the same helper macros as Linux), modifying our custom-written libgcc code for 64-bit division to support Thumb (removing some stale old files that were never really used for clarity), and flipping the general CFLAGS to Thumb (some more cleanup there as well while I'm at it). BUG=None TEST=Snow and Nyan still boot. Original-Change-Id: I80c04281e3adbf74f9f477486a96b9fafeb455b3 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/182212 Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 5f65c17cbfae165a95354146ae79e06c512c2c5a) Conflicts: payloads/libpayload/include/arm/arch/asm.h src/arch/arm/Makefile.inc src/arch/arm/armv7/Makefile.inc *** There is an issue with what to do with ramstage-S-ccopts, and *** will need to be covered in additional ARM cleanup patches. Change-Id: I80c04281e3adbf74f9f477486a96b9fafeb455b3 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/6930 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-01-13 22:24:30 +01:00
# Add other classes here when you put assembly files into them!
head.o-S-ccopts += $(arm_asm_flags)
libc-S-ccopts += $(arm_asm_flags)