coreboot-kgpe-d16/src/mainboard/intel/dcp847ske/devicetree.cb

109 lines
3.6 KiB
Text
Raw Normal View History

intel/dcp847ske: Add Intel NUC DCP847SKE https://ark.intel.com/products/71620/Intel-NUC-Board-DCP847SKE Created using autoport and manual edits. mainboard_fill_pei_data copied and adjusted from samsung/lumpy. Tested: - RAM slots with 2x4GB Kingston KVR1333D3S9/4G (DDR3-1333 1.5V). - RAM slots with 2x4GB Kingston KVR16LS11/4G (DDR3L-1600 1.35V). - SeaBIOS stable payload. - Linux 4.13.14 payload. - Booting into Linux 4.13.14 with Debian/unstable installed on the internal mSATA slot. - Non-native raminit (works). - Native raminit - KVR1333D3S9 doesn't work. - KVR16LS11 only works at 1.5V. - Native VGA init, HDMI port detection with libgfxinit. - Basic ACPI functions (power button event; power-off; reboot). - Suspend to RAM and resume works. - PCIe WLAN in half-minicard slot. - USB device in half-minicard slot. - PCIe device in full-minicard slot. - mSATA device in full-minicard slot. - Fan spins up/down in response to CPU load. Known issues: - Native raminit fails timC calibration with the RAM I have. - Technical Product Specification mentions overcurrent protection for back panel and front panel USB connectors, but I haven't been able to trigger it with either native fw or coreboot (tried up to 2.5A load). Untested: - USB debug port. Change-Id: I6e210310f55c051eaf61e0698fed855eda5d7d90 Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: https://review.coreboot.org/22683 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-12-03 10:09:28 +01:00
chip northbridge/intel/sandybridge
# IGD Displays
register "gfx.ndid" = "3"
register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410, 0x80000410, 0x00000005 }"
# Enable DisplayPort 1 Hotplug with 6ms pulse
register "gpu_dp_d_hotplug" = "0x06"
# Enable DisplayPort 0 Hotplug with 6ms pulse
register "gpu_dp_c_hotplug" = "0x06"
# Enable DVI Hotplug with 6ms pulse
register "gpu_dp_b_hotplug" = "0x06"
device cpu_cluster 0x0 on
chip cpu/intel/socket_rPGA989
device lapic 0x0 on end
end
chip cpu/intel/model_206ax
# Magic APIC ID to locate this chip
device lapic 0xACAC off end
register "c1_battery" = "1"
register "c2_battery" = "3"
register "c3_battery" = "5"
register "c1_acpower" = "1"
register "c2_acpower" = "3"
register "c3_acpower" = "5"
end
end
device domain 0x0 on
device pci 00.0 on end # Host bridge Host bridge
device pci 01.0 off end # PCIe Bridge for discrete graphics
device pci 02.0 on end # Internal graphics VGA controller
chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH
register "c2_latency" = "0x0065"
register "sata_port_map" = "0x1"
register "spi_lvscc" = "0x2005"
register "spi_uvscc" = "0x2005"
register "gen1_dec" = "0x00fc0a01" # SuperIO @0xa00-0xaff
device pci 16.0 on end # Management Engine Interface 1
device pci 16.1 off end # Management Engine Interface 2
device pci 16.2 off end # Management Engine IDE-R
device pci 16.3 off end # Management Engine KT
device pci 19.0 on end # Intel Gigabit Ethernet
device pci 1a.0 off end # USB2 EHCI #2
device pci 1b.0 on end # High Definition Audio Audio controller
device pci 1c.0 on end # PCIe Port #1 (unused)
device pci 1c.1 on end # PCIe Port #2 (full-length mPCIe/mSATA)
device pci 1c.2 on end # PCIe Port #3 (half-length mPCIe)
device pci 1c.3 off end # PCIe Port #4
device pci 1c.4 off end # PCIe Port #5
device pci 1c.5 off end # PCIe Port #6
device pci 1c.6 off end # PCIe Port #7
device pci 1c.7 off end # PCIe Port #8
device pci 1d.0 on end # USB2 EHCI #1
device pci 1e.0 off end # PCI bridge
device pci 1f.0 on # LPC bridge PCI-LPC bridge
chip superio/nuvoton/nct6776
device pnp 4e.0 off end # Floppy
device pnp 4e.1 off end # Parallel port
device pnp 4e.2 on # COM1
io 0x60 = 0x3f8
irq 0x70 = 4
end
device pnp 4e.3 off end # COM2, IR
device pnp 4e.5 off end # Keyboard
device pnp 4e.6 off end # CIR
device pnp 4e.7 on end # GPIO6
device pnp 4e.107 on end # GPIO7
device pnp 4e.207 off end # GPIO8
device pnp 4e.307 off end # GPIO9
device pnp 4e.8 off end # WDT
device pnp 4e.108 on end # GPIO0
device pnp 4e.208 off end # GPIOA
device pnp 4e.308 on # GPIOBASE
io 0x60 = 0xa80
end
device pnp 4e.109 off end # GPIO1
device pnp 4e.209 on end # GPIO2
device pnp 4e.309 off end # GPIO3
device pnp 4e.409 off end # GPIO4
device pnp 4e.509 off end # GPIO5
device pnp 4e.609 off end # GPIO6
device pnp 4e.709 off end # GPIO7
device pnp 4e.a on end # ACPI
device pnp 4e.b on # HWM, front pannel LED
io 0x60 = 0xa30
io 0x62 = 0 # unused
end
device pnp 4e.d off end # VID
device pnp 4e.e off end # CIR WAKE-UP
device pnp 4e.f off end # GPIO
device pnp 4e.14 off end # SVID
device pnp 4e.16 off end # Deep sleep
device pnp 4e.17 off end # GPIOA
end
end
device pci 1f.2 on end # SATA Controller 1
device pci 1f.3 on end # SMBus
device pci 1f.5 off end # SATA Controller 2
device pci 1f.6 off end # Thermal
end
end
end