88 lines
2.5 KiB
Markdown
88 lines
2.5 KiB
Markdown
|
# Star LabTop Mk IV
|
||
|
|
|
||
|
|
## Specs
|
||
|
|
|
||
|
|
- CPU (full processor specs available at https://ark.intel.com)
|
||
|
|
- Intel i7-10710U (Comet Lake)
|
||
|
|
- Intel i3-10110U (Comet Lake)
|
||
|
|
- EC
|
||
|
|
- ITE IT8987E
|
||
|
|
- Backlit Keyboard, with standard PS/2 keycodes and SCI hotkeys
|
||
|
|
- Battery
|
||
|
|
- Charger, using AC adapter or USB-C PD
|
||
|
|
- Suspend / resume
|
||
|
|
- GPU
|
||
|
|
- Intel UHD Graphics 620
|
||
|
|
- GOP driver is recommended, VBT is provided
|
||
|
|
- eDP 13-inch 1920x1080 LCD
|
||
|
|
- HDMI video
|
||
|
|
- USB-C DisplayPort video
|
||
|
|
- Memory
|
||
|
|
- 16GB on-board *1
|
||
|
|
- Networking
|
||
|
|
- AX201 CNVi WiFi / Bluetooth soldered to PCBA
|
||
|
|
- Sound
|
||
|
|
- Realtek ALC256
|
||
|
|
- Internal speakers
|
||
|
|
- Internal microphone
|
||
|
|
- Combined headphone / microphone 3.5-mm jack
|
||
|
|
- HDMI audio
|
||
|
|
- USB-C DisplayPort audio
|
||
|
|
- Storage
|
||
|
|
- M.2 PCIe SSD
|
||
|
|
- RTS5129 MicroSD card reader
|
||
|
|
- USB
|
||
|
|
- 1280x720 CCD camera
|
||
|
|
- USB 3.1 Gen 2 Type-C (left)
|
||
|
|
- USB 3.1 Gen 2 Type-A (left)
|
||
|
|
- USB 3.1 Gen 1 Type-A (right)
|
||
|
|
|
||
|
|
[^1] The Comet Lake PCB supports multiple memory variations that are based on hardware configuration resistors see `src/mainboard/starlabs/labtop/variants/cml/romstage.c`
|
||
|
|
|
||
|
|
## Building coreboot
|
||
|
|
|
||
|
|
### Preliminaries
|
||
|
|
|
||
|
|
Prior to building coreboot the following files are required:
|
||
|
|
* Intel Flash Descriptor file (descriptor.bin)
|
||
|
|
* Intel Management Engine firmware (me.bin)
|
||
|
|
* ITE Embedded Controller firmware (ec.bin)
|
||
|
|
|
||
|
|
The files listed below are optional:
|
||
|
|
- Splash screen image in Windows 3.1 BMP format (Logo.bmp)
|
||
|
|
|
||
|
|
These files exist in the correct location in the StarLabsLtd/blobs repo on GitHub which is used in place of the standard 3rdparty/blobs repo.
|
||
|
|
|
||
|
|
### Build
|
||
|
|
|
||
|
|
The following commands will build a working image:
|
||
|
|
|
||
|
|
```bash
|
||
|
|
make distclean
|
||
|
|
make defconfig KBUILD_DEFCONFIG=configs/config.starlabs_labtop_cml
|
||
|
|
make
|
||
|
|
```
|
||
|
|
|
||
|
|
## Flashing coreboot
|
||
|
|
|
||
|
|
```eval_rst
|
||
|
|
+---------------------+------------+
|
||
|
|
| Type | Value |
|
||
|
|
+=====================+============+
|
||
|
|
| Socketed flash | no |
|
||
|
|
+---------------------+------------+
|
||
|
|
| Vendor | Winbond |
|
||
|
|
+---------------------+------------+
|
||
|
|
| Model | 25Q128JVSQ |
|
||
|
|
+---------------------+------------+
|
||
|
|
| Size | 16 MiB |
|
||
|
|
+---------------------+------------+
|
||
|
|
| Package | SOIC-8 |
|
||
|
|
+---------------------+------------+
|
||
|
|
| Internal flashing | yes |
|
||
|
|
+---------------------+------------+
|
||
|
|
| External flashing | yes |
|
||
|
|
+---------------------+------------+
|
||
|
|
|
||
|
|
Please see [here](../common/flashing.md) for instructions on how to flash with fwupd.
|