coreboot-kgpe-d16/payloads/libpayload/gdb/transport.c

236 lines
5.8 KiB
C
Raw Normal View History

libpayload: Add remote GDB support This patch adds the ability to attach a GDB host through the UART to a running payload. Libpayload implements a small stub that can parse and respond to the GDB remote protocol and provide the required primitives (reading/writing registers/memory, etc.) to allow GDB to control execution. The goal of this implementation is to be as small and uninvasive as possible. It implements only the minimum amount of primitives required, and relies on GDB's impressive workaround capabilities (such as emulating breakpoints by temporarily replacing instructions) for the more complicated features. This way, a relatively tiny amount of code on the firmware side opens a vast range of capabilities to the user, not just in debugging but also in remote-controlling the firmware to change its behavior (e.g. through GDBs ability to modify variables and call functions). By default, a system with the REMOTEGDB Kconfig will only trap into GDB when executing halt() (including the calls from die_if(), assert(), and exception handlers). In addition, payloads can manually call gdb_enter() if desired. It will print a final "Ready for GDB connection." on the serial, detach the normal serial output driver and wait for the commands that GDB starts sending on attach. Based on original implementation by Gabe Black <gabeblack@chromium.org>. BUG=chrome-os-partner:18390 TEST=Boot a GDB enabled image in recovery mode (or get it to hit a halt()), close your terminal, execute '<toolchain>-gdb --symbols /build/<board>/firmware/depthcharge_gdb/depthcharge.elf --directory ~/trunk/src/third_party/coreboot/payloads/libpayload --directory ~/trunk/src/platform/depthcharge --directory ~/trunk/src/platform/vboot_reference --ex "target remote <cpu_uart_pty>"' and behold the magic. (You can also SIGSTOP your terminal's parent shell and the terminal itself, and SIGCONT them in reverse order after GDB exits. More convenient wrapper tools to do all this automatically coming soon.) Original-Change-Id: Ib440d1804126cdfdac4a8801f5015b4487e25269 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/202563 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 9c4a642c7be2faf122fef39bdfaddd64aec68b77) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I9238b4eb19d3ab2c98e4e1c5946cd7d252ca3c3b Reviewed-on: http://review.coreboot.org/8119 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-05-15 20:57:38 +02:00
/*
* Copyright 2014 Google Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but without any warranty; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <gdb.h>
#include <libpayload.h>
static const int timeout_us = 100 * 1000;
static const char output_overrun[] = "GDB output buffer overrun (try "
"increasing reply.size)!\n";
static const char input_underrun[] = "GDB input message truncated (bug or "
"communication problem)?\n";
/* Serial-specific glue code... add more transport layers here when desired. */
static void gdb_raw_putchar(u8 c)
{
serial_putchar(c);
}
static int gdb_raw_getchar(void)
{
u64 start = timer_us(0);
while (!serial_havechar())
if (timer_us(start) > timeout_us)
return -1;
return serial_getchar();
}
void gdb_transport_init(void)
{
console_remove_output_driver(serial_putchar);
}
void gdb_transport_teardown(void)
{
serial_console_init();
}
/* Hex digit character <-> number conversion (illegal chars undefined!). */
static s8 from_hex(unsigned char c)
{
static const s8 values[] = {
-1, 10, 11, 12, 13, 14, 15, -1,
-1, -1, -1, -1, -1, -1, -1, -1,
0, 1, 2, 3, 4, 5, 6, 7,
8, 9, -1, -1, -1, -1, -1, -1,
};
return values[c & 0x1f];
}
static char to_hex(u8 v)
{
static const char digits[] = "0123456789abcdef";
return digits[v & 0xf];
}
/* Message encode/decode functions */
void gdb_message_encode_bytes(struct gdb_message *message, const void *data,
int length)
{
const u8 *bytes = data;
die_if(message->used + length * 2 > message->size, output_overrun);
while (length--) {
message->buf[message->used++] = to_hex(*bytes >> 4);
message->buf[message->used++] = to_hex(*bytes & 0xf);
bytes++;
}
}
void gdb_message_decode_bytes(const struct gdb_message *message, int offset,
void *data, int length)
{
u8 *bytes = data;
die_if(offset + 2 * length > message->used, "Decode overrun in GDB "
"message: %.*s", message->used, message->buf);
while (length--) {
*bytes = from_hex(message->buf[offset++]) << 4;
*bytes += from_hex(message->buf[offset++]);
bytes++;
}
}
void gdb_message_encode_zero_bytes(struct gdb_message *message, int length)
{
die_if(message->used + length * 2 > message->size, output_overrun);
memset(message->buf + message->used, '0', length * 2);
message->used += length * 2;
}
void gdb_message_add_string(struct gdb_message *message, const char *string)
{
message->used += strlcpy((char *)message->buf + message->used,
string, message->size - message->used);
/* Check >= instead of > to account for strlcpy's trailing '\0'. */
die_if(message->used >= message->size, output_overrun);
}
void gdb_message_encode_int(struct gdb_message *message, uintptr_t val)
{
int length = sizeof(uintptr_t) * 2 - __builtin_clz(val) / 4;
die_if(message->used + length > message->size, output_overrun);
while (length--)
message->buf[message->used++] =
to_hex((val >> length * 4) & 0xf);
}
uintptr_t gdb_message_decode_int(const struct gdb_message *message, int offset,
int length)
{
uintptr_t val = 0;
die_if(length > sizeof(uintptr_t) * 2, "GDB decoding invalid number: "
"%.*s", message->used, message->buf);
while (length--) {
val <<= 4;
val |= from_hex(message->buf[offset++]);
}
return val;
}
/* Like strtok/strsep: writes back offset argument, returns original offset. */
int gdb_message_tokenize(const struct gdb_message *message, int *offset)
{
int token = *offset;
while (!strchr(",;:", message->buf[(*offset)++]))
die_if(*offset >= message->used, "Undelimited token in GDB "
"message at offset %d: %.*s",
token, message->used, message->buf);
return token;
}
/* High-level send/receive functions. */
void gdb_get_command(struct gdb_message *command)
{
enum command_state {
STATE_WAITING,
STATE_COMMAND,
STATE_CHECKSUM0,
STATE_CHECKSUM1,
};
u8 checksum = 0;
u8 running_checksum = 0;
enum command_state state = STATE_WAITING;
while (1) {
int c = gdb_raw_getchar();
if (c < 0) {
/*
* Timeout waiting for a byte. Reset the
* state machine.
*/
state = STATE_WAITING;
continue;
}
switch (state) {
case STATE_WAITING:
if (c == '$') {
running_checksum = 0;
command->used = 0;
state = STATE_COMMAND;
}
break;
case STATE_COMMAND:
if (c == '#') {
state = STATE_CHECKSUM0;
break;
}
die_if(command->used >= command->size, "GDB input buf"
"fer overrun (try increasing command.size)!\n");
command->buf[command->used++] = c;
running_checksum += c;
break;
case STATE_CHECKSUM0:
checksum = from_hex(c) << 4;
state = STATE_CHECKSUM1;
break;
case STATE_CHECKSUM1:
checksum += from_hex(c);
if (running_checksum == checksum) {
gdb_raw_putchar('+');
return;
} else {
state = STATE_WAITING;
gdb_raw_putchar('-');
}
break;
}
}
}
void gdb_send_reply(const struct gdb_message *reply)
{
int i;
int retries = 1 * 1000 * 1000 / timeout_us;
u8 checksum = 0;
for (i = 0; i < reply->used; i++)
checksum += reply->buf[i];
do {
gdb_raw_putchar('$');
for (i = 0; i < reply->used; i++)
gdb_raw_putchar(reply->buf[i]);
gdb_raw_putchar('#');
gdb_raw_putchar(to_hex(checksum >> 4));
gdb_raw_putchar(to_hex(checksum & 0xf));
} while (gdb_raw_getchar() != '+' && retries--);
}