GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
coreboot-kgpe-d16/util/cbfstool/fit.h

39 lines
1.4 KiB
C
Raw Normal View History

cbfstool: Add update-fit command Add support for filling in the Firmware Interface Table. For now it only supports adding microcode entries. It takes 2 options: 1. Name of file in cbfs where the mircocode is located 2. The number of empty entries in the table. Verified with go firmware tools. Also commented out updating microcode in the bootblock. When romstage runs, the CPUs indicate their microcode is already loaded. Change-Id: Iaccaa9c226ee24868a5f4c0ba79729015d15bbef Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2712 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2012-12-15 00:16:21 +01:00
/*
* Firmware Interface Table support.
*
* Copyright (C) 2012 Google Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
Remove address from GPLv2 headers As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-03-26 15:17:45 +01:00
* Foundation, Inc.
cbfstool: Add update-fit command Add support for filling in the Firmware Interface Table. For now it only supports adding microcode entries. It takes 2 options: 1. Name of file in cbfs where the mircocode is located 2. The number of empty entries in the table. Verified with go firmware tools. Also commented out updating microcode in the bootblock. When romstage runs, the CPUs indicate their microcode is already loaded. Change-Id: Iaccaa9c226ee24868a5f4c0ba79729015d15bbef Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2712 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2012-12-15 00:16:21 +01:00
*/
#ifndef __CBFSTOOL_FIT_H
#define __CBFSTOOL_FIT_H
cbfstool: Make update-fit action work on new-style images Because new images place the bootblock in a separate region from the primary CBFS, performing an update-fit operation requires reading an additional section and choosing a different destination for the write based on the image type. Since other actions are not affected by these requirements, the logic for the optional read and all writing is implemented in the cbfs_update_fit() function itself, rather than relying on the main() function for writing as the other actions do. Change-Id: I2024c59715120ecc3b9b158e007ebce75acff023 Signed-off-by: Sol Boucher <solb@chromium.org> Reviewed-on: http://review.coreboot.org/10137 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-05-06 23:44:40 +02:00
#include "cbfs_image.h"
#include "common.h"
/*
* Converts between offsets from the start of the specified image region and
* "top-aligned" offsets from the top of the entire flash image. Should work in
* both directions: accepts either type of offset and produces the other type.
* The implementation must have some notion of the flash image's total size.
*/
typedef unsigned (*fit_offset_converter_t)(const struct buffer *region,
unsigned offset);
int fit_update_table(struct buffer *bootblock, struct cbfs_image *image,
const char *microcode_blob_name, int empty_entries,
fit_offset_converter_t offset_fn);
cbfstool: Add update-fit command Add support for filling in the Firmware Interface Table. For now it only supports adding microcode entries. It takes 2 options: 1. Name of file in cbfs where the mircocode is located 2. The number of empty entries in the table. Verified with go firmware tools. Also commented out updating microcode in the bootblock. When romstage runs, the CPUs indicate their microcode is already loaded. Change-Id: Iaccaa9c226ee24868a5f4c0ba79729015d15bbef Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2712 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2012-12-15 00:16:21 +01:00
#endif