coreboot-kgpe-d16/payloads/libpayload/Makefile

316 lines
9.6 KiB
Makefile
Raw Normal View History

##
## This file is part of the libpayload project.
##
## Copyright (C) 2008 Advanced Micro Devices, Inc.
## Copyright (C) 2008 Uwe Hermann <uwe@hermann-uwe.de>
## Copyright (C) 2009-2010 coresystems GmbH
## Copyright (C) 2011 secunet Security Networks AG
##
## Redistribution and use in source and binary forms, with or without
## modification, are permitted provided that the following conditions
## are met:
## 1. Redistributions of source code must retain the above copyright
## notice, this list of conditions and the following disclaimer.
## 2. Redistributions in binary form must reproduce the above copyright
## notice, this list of conditions and the following disclaimer in the
## documentation and/or other materials provided with the distribution.
## 3. The name of the author may not be used to endorse or promote products
## derived from this software without specific prior written permission.
##
## THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
## ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
## IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
## ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
## FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
## DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
## OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
## HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
## LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
## OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
## SUCH DAMAGE.
##
ifeq ($(INNER_SCANBUILD),y)
CC_real:=$(CC)
endif
# in addition to the dependency below, create the file if it doesn't exist
# to silence stupid warnings about a file that would be generated anyway.
$(if $(wildcard .xcompile),,$(eval $(shell util/xcompile/xcompile $(XGCCPATH) > .xcompile)))
.xcompile: util/xcompile/xcompile
$< $(XGCCPATH) > $@.tmp
\mv -f $@.tmp $@ 2> /dev/null
ifeq ($(INNER_SCANBUILD),y)
CC:=$(CC_real)
HOSTCC:=$(CC_real) --hostcc
HOSTCXX:=$(CC_real) --hostcxx
endif
export top := $(CURDIR)
export src := src
export srck := $(abspath $(top)/../../util/kconfig)
export obj ?= build
export objutil ?= $(obj)/util
export objk := $(objutil)/lp_kconfig
export KCONFIG_AUTOHEADER := $(obj)/config.h
export KCONFIG_AUTOCONFIG := $(obj)/auto.conf
export KCONFIG_DEPENDENCIES := $(obj)/auto.conf.cmd
export KCONFIG_SPLITCONFIG := $(obj)/config
export KCONFIG_TRISTATE := $(obj)/tristate.conf
export KCONFIG_NEGATIVES := 1
export Kconfig := Kconfig
export CONFIG_ := CONFIG_LP_
# directory containing the toplevel Makefile.inc
TOPLEVEL := .
CONFIG_LP_SHELL := sh
KBUILD_DEFCONFIG := configs/defconfig
UNAME_RELEASE := $(shell uname -r)
DOTCONFIG ?= .config
KCONFIG_CONFIG = $(DOTCONFIG)
export KCONFIG_CONFIG
HAVE_DOTCONFIG := $(wildcard $(DOTCONFIG))
MAKEFLAGS += -rR --no-print-directory
# Make is silent per default, but 'make V=1' will show all compiler calls.
Q:=@
ifneq ($(V),1)
ifneq ($(Q),)
.SILENT:
endif
endif
CPP:= $(CC) -x assembler-with-cpp -DASSEMBLY -E
HOSTCC = gcc
HOSTCXX = g++
HOSTCFLAGS := -I$(srck) -I$(objk) -g
HOSTCXXFLAGS := -I$(srck) -I$(objk)
DOXYGEN := doxygen
DOXYGEN_OUTPUT_DIR := doxygen
all: real-all
# This include must come _before_ the pattern rules below!
# Order _does_ matter for pattern rules.
include $(srck)/Makefile
include $(HAVE_DOTCONFIG)
include .xcompile
ARM: Generalize armv7 as arm. There are ARM systems which are essentially heterogeneous multicores where some cores implement a different ARM architecture version than other cores. A specific example is the tegra124 which boots on an ARMv4 coprocessor while most code, including most of the firmware, runs on the main ARMv7 core. To support SOCs like this, the plan is to generalize the ARM architecture so that all versions are available, and an SOC/CPU can then select what architecture variant should be used for each component of the firmware; bootblock, romstage, and ramstage. Old-Change-Id: I22e048c3bc72bd56371e14200942e436c1e312c2 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/171338 Reviewed-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 8423a41529da0ff67fb9873be1e2beb30b09ae2d) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> ARM: Split out ARMv7 code and make it possible to have other arch versions. We don't always want to use ARMv7 code when building for ARM, so we should separate out the ARMv7 code so it can be excluded, and also make it possible to include code for some other version of the architecture instead, all per build component for cases where we need more than one architecture version at a time. The tegra124 bootblock will ultimately need to be ARMv4, but until we have some ARMv4 code to switch over to we can leave it set to ARMv7. Old-Change-Id: Ia982c91057fac9c252397b7c866224f103761cc7 Reviewed-on: https://chromium-review.googlesource.com/171400 Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 799514e6060aa97acdcf081b5c48f965be134483) Squashed two related patches for splitting ARM support into general ARM support and ARMv7 specific pieces. Change-Id: Ic6511507953a2223c87c55f90252c4a4e1dd6010 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6782 Tested-by: build bot (Jenkins)
2013-10-01 08:00:33 +02:00
ARCHDIR-$(CONFIG_LP_ARCH_ARM) := arm
ARCHDIR-$(CONFIG_LP_ARCH_ARM64) := arm64
ARCHDIR-$(CONFIG_LP_ARCH_MIPS) := mips
ARCHDIR-$(CONFIG_LP_ARCH_X86) := x86
ARCH-y := $(ARCHDIR-y)
# If architecture folder name is different from GCC binutils architecture name,
# override here.
ARM: Generalize armv7 as arm. There are ARM systems which are essentially heterogeneous multicores where some cores implement a different ARM architecture version than other cores. A specific example is the tegra124 which boots on an ARMv4 coprocessor while most code, including most of the firmware, runs on the main ARMv7 core. To support SOCs like this, the plan is to generalize the ARM architecture so that all versions are available, and an SOC/CPU can then select what architecture variant should be used for each component of the firmware; bootblock, romstage, and ramstage. Old-Change-Id: I22e048c3bc72bd56371e14200942e436c1e312c2 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/171338 Reviewed-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 8423a41529da0ff67fb9873be1e2beb30b09ae2d) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> ARM: Split out ARMv7 code and make it possible to have other arch versions. We don't always want to use ARMv7 code when building for ARM, so we should separate out the ARMv7 code so it can be excluded, and also make it possible to include code for some other version of the architecture instead, all per build component for cases where we need more than one architecture version at a time. The tegra124 bootblock will ultimately need to be ARMv4, but until we have some ARMv4 code to switch over to we can leave it set to ARMv7. Old-Change-Id: Ia982c91057fac9c252397b7c866224f103761cc7 Reviewed-on: https://chromium-review.googlesource.com/171400 Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 799514e6060aa97acdcf081b5c48f965be134483) Squashed two related patches for splitting ARM support into general ARM support and ARMv7 specific pieces. Change-Id: Ic6511507953a2223c87c55f90252c4a4e1dd6010 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6782 Tested-by: build bot (Jenkins)
2013-10-01 08:00:33 +02:00
ARCH-$(CONFIG_LP_ARCH_ARM) := arm
ARCH-$(CONFIG_LP_ARCH_ARM64) := arm64
ARCH-$(CONFIG_LP_ARCH_X86) := i386
ARCH-$(CONFIG_LP_ARCH_MIPS) := mipsel
CC := $(CC_$(ARCH-y))
AS := $(AS_$(ARCH-y))
LD := $(LD_$(ARCH-y))
NM := $(NM_$(ARCH-y))
OBJCOPY := $(OBJCOPY_$(ARCH-y))
OBJDUMP := $(OBJDUMP_$(ARCH-y))
READELF := $(READELF_$(ARCH-y))
STRIP := $(STRIP_$(ARCH-y))
AR := $(AR_$(ARCH-y))
CFLAGS += $(CFLAGS_$(ARCH-y))
# Three cases where we don't need fully populated $(obj) lists:
# 1. when no .config exists
# 2. when make config (in any flavour) is run
# 3. when make distclean is run
# Don't waste time on reading all Makefile.incs in these cases
ifeq ($(strip $(HAVE_DOTCONFIG)),)
NOCOMPILE:=1
endif
ifneq ($(MAKECMDGOALS),)
ifneq ($(filter %config distclean,$(MAKECMDGOALS)),)
NOCOMPILE:=1
endif
endif
ifeq ($(NOCOMPILE),1)
include $(TOPLEVEL)/Makefile.inc
real-all: config
else
ifneq ($(INNER_SCANBUILD),y)
ifeq ($(CONFIG_LP_COMPILER_LLVM_CLANG),y)
CC:=clang -m32
HOSTCC:=clang
endif
endif
ifeq ($(CONFIG_LP_CCACHE),y)
CCACHE:=$(word 1,$(wildcard $(addsuffix /ccache,$(subst :, ,$(PATH)))))
ifeq ($(CCACHE),)
$(error ccache selected, but not found in PATH)
endif
CCACHE:=CCACHE_COMPILERCHECK=content CCACHE_BASEDIR=$(top) $(CCACHE)
CC := $(CCACHE) $(CC)
HOSTCC := $(CCACHE) $(HOSTCC)
HOSTCXX := $(CCACHE) $(HOSTCXX)
ROMCC := $(CCACHE) $(ROMCC)
endif
strip_quotes = $(subst ",,$(subst \",,$(1)))
# The primary target needs to be here before we include the
# other files
ifeq ($(INNER_SCANBUILD),y)
CONFIG_LP_SCANBUILD_ENABLE:=
endif
ifeq ($(CONFIG_LP_SCANBUILD_ENABLE),y)
ifneq ($(CONFIG_LP_SCANBUILD_REPORT_LOCATION),)
CONFIG_LP_SCANBUILD_REPORT_LOCATION:=-o $(CONFIG_LP_SCANBUILD_REPORT_LOCATION)
endif
real-all:
echo '#!/bin/sh' > .ccwrap
echo 'CC="$(CC)"' >> .ccwrap
echo 'if [ "$$1" = "--hostcc" ]; then shift; CC="$(HOSTCC)"; fi' >> .ccwrap
echo 'if [ "$$1" = "--hostcxx" ]; then shift; CC="$(HOSTCXX)"; fi' >> .ccwrap
echo 'eval $$CC $$*' >> .ccwrap
chmod +x .ccwrap
scan-build $(CONFIG_LP_SCANBUILD_REPORT_LOCATION) -analyze-headers --use-cc=$(top)/.ccwrap --use-c++=$(top)/.ccwrap $(MAKE) INNER_SCANBUILD=y
else
real-all: real-target
endif
# must come rather early
.SECONDEXPANSION:
$(obj)/config.h:
$(MAKE) oldconfig
# Add a new class of source/object files to the build system
add-class= \
$(eval $(1)-srcs:=) \
$(eval $(1)-objs:=) \
$(eval classes+=$(1))
# Special classes are managed types with special behaviour
# On parse time, for each entry in variable $(1)-y
# a handler $(1)-handler is executed with the arguments:
# * $(1): directory the parser is in
# * $(2): current entry
add-special-class= \
$(eval $(1):=) \
$(eval special-classes+=$(1))
# Clean -y variables, include Makefile.inc
# Add paths to files in X-y to X-srcs
# Add subdirs-y to subdirs
includemakefiles= \
$(foreach class,classes subdirs $(classes) $(special-classes), $(eval $(class)-y:=)) \
$(eval -include $(1)) \
$(foreach class,$(classes-y), $(call add-class,$(class))) \
$(foreach class,$(classes), \
$(eval $(class)-srcs+= \
$$(subst $(top)/,, \
$$(abspath $$(addprefix $(dir $(1)),$$($(class)-y)))))) \
$(foreach special,$(special-classes), \
$(foreach item,$($(special)-y), $(call $(special)-handler,$(dir $(1)),$(item)))) \
$(eval subdirs+=$$(subst $(CURDIR)/,,$$(abspath $$(addprefix $(dir $(1)),$$(subdirs-y)))))
# For each path in $(subdirs) call includemakefiles
# Repeat until subdirs is empty
evaluate_subdirs= \
$(eval cursubdirs:=$(subdirs)) \
$(eval subdirs:=) \
$(foreach dir,$(cursubdirs), \
$(eval $(call includemakefiles,$(dir)/Makefile.inc))) \
$(if $(subdirs),$(eval $(call evaluate_subdirs)))
# collect all object files eligible for building
subdirs:=$(TOPLEVEL)
$(eval $(call evaluate_subdirs))
src-to-obj=$(addsuffix .$(1).o, $(basename $(addprefix $(obj)/, $($(1)-srcs))))
$(foreach class,$(classes),$(eval $(class)-objs:=$(call src-to-obj,$(class))))
allsrcs:=$(foreach var, $(addsuffix -srcs,$(classes)), $($(var)))
allobjs:=$(foreach var, $(addsuffix -objs,$(classes)), $($(var)))
alldirs:=$(sort $(abspath $(dir $(allobjs))))
# macro to define template macros that are used by use_template macro
define create_cc_template
# $1 obj class
# $2 source suffix (c, S)
# $3 additional compiler flags
# $4 additional dependencies
ifn$(EMPTY)def $(1)-objs_$(2)_template
de$(EMPTY)fine $(1)-objs_$(2)_template
$(obj)/$$(1).$(1).o: $$(1).$(2) $(obj)/libpayload-config.h $(4)
@printf " CC $$$$(subst $$$$(obj)/,,$$$$(@))\n"
$(CC) $(3) -MMD $$$$(CFLAGS) -c -o $$$$@ $$$$<
en$(EMPTY)def
end$(EMPTY)if
endef
filetypes-of-class=$(subst .,,$(sort $(suffix $($(1)-srcs))))
$(foreach class,$(classes), \
$(foreach type,$(call filetypes-of-class,$(class)), \
$(eval $(call create_cc_template,$(class),$(type),$($(class)-$(type)-ccopts),$($(class)-$(type)-deps)))))
foreach-src=$(foreach file,$($(1)-srcs),$(eval $(call $(1)-objs_$(subst .,,$(suffix $(file)))_template,$(basename $(file)))))
$(eval $(foreach class,$(classes),$(call foreach-src,$(class))))
DEPENDENCIES = $(allobjs:.o=.d)
-include $(DEPENDENCIES)
printall:
@$(foreach class,$(classes),echo $(class)-objs:=$($(class)-objs); )
@echo alldirs:=$(alldirs)
@echo allsrcs=$(allsrcs)
@echo DEPENDENCIES=$(DEPENDENCIES)
@$(foreach class,$(special-classes),echo $(class):='$($(class))'; )
endif
$(shell mkdir -p $(KCONFIG_SPLITCONFIG) $(obj) $(objk)/lxdialog $(additional-dirs) $(alldirs))
cscope:
cscope -bR
doxy: doxygen
doxygen:
$(DOXYGEN) Doxyfile
doxyclean: doxygen-clean
doxygen-clean:
rm -rf $(DOXYGEN_OUTPUT_DIR)
clean-for-update: doxygen-clean clean-for-update-target
rm -f $(allobjs) .xcompile
rm -f $(DEPENDENCIES)
rmdir -p $(alldirs) 2>/dev/null >/dev/null || true
clean: clean-for-update clean-target
rm -f .ccwrap
clean-cscope:
rm -f cscope.out
distclean: clean-cscope
rm -rf $(obj)
rm -f .config .config.old ..config.tmp .kconfig.d .tmpconfig* .ccwrap .xcompile
.PHONY: $(PHONY) clean clean-cscope cscope distclean doxygen doxy .xcompile