2008-09-02 18:06:22 +02:00
|
|
|
/*
|
|
|
|
* This file is part of the libpayload project.
|
|
|
|
*
|
|
|
|
* Copyright (C) 2008 coresystems GmbH
|
|
|
|
*
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
|
|
* derived from this software without specific prior written permission.
|
|
|
|
*
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
|
|
* SUCH DAMAGE.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <arch/endian.h>
|
2008-09-11 19:29:00 +02:00
|
|
|
#include <usb/usb.h>
|
|
|
|
#include <usb/usbmsc.h>
|
|
|
|
#include <usb/usbdisk.h>
|
2008-09-02 18:06:22 +02:00
|
|
|
|
|
|
|
enum {
|
|
|
|
msc_subclass_rbc = 0x1,
|
|
|
|
msc_subclass_mmc2 = 0x2,
|
|
|
|
msc_subclass_qic157 = 0x3,
|
|
|
|
msc_subclass_ufi = 0x4,
|
|
|
|
msc_subclass_sff8070i = 0x5,
|
|
|
|
msc_subclass_scsitrans = 0x6
|
|
|
|
};
|
|
|
|
static const char *msc_subclass_strings[7] = {
|
|
|
|
"(none)",
|
|
|
|
"RBC",
|
|
|
|
"MMC-2",
|
|
|
|
"QIC-157",
|
|
|
|
"UFI",
|
|
|
|
"SFF-8070i",
|
|
|
|
"SCSI transparent"
|
|
|
|
};
|
|
|
|
enum {
|
|
|
|
msc_proto_cbi_wcomp = 0x0,
|
|
|
|
msc_proto_cbi_wocomp = 0x1,
|
|
|
|
msc_proto_bulk_only = 0x50
|
|
|
|
};
|
|
|
|
static const char *msc_protocol_strings[0x51] = {
|
|
|
|
"Control/Bulk/Interrupt protocol (with command completion interrupt)",
|
|
|
|
"Control/Bulk/Interrupt protocol (with no command completion interrupt)",
|
|
|
|
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
|
|
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
|
|
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
|
|
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
|
|
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
|
|
"Bulk-Only Transport"
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
usb_msc_destroy (usbdev_t *dev)
|
|
|
|
{
|
2008-10-16 21:20:51 +02:00
|
|
|
if (usbdisk_remove)
|
|
|
|
usbdisk_remove (dev);
|
2008-09-02 18:06:22 +02:00
|
|
|
free (dev->data);
|
|
|
|
dev->data = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
usb_msc_poll (usbdev_t *dev)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
|
|
|
const int DEV_RESET = 0xff;
|
|
|
|
const int GET_MAX_LUN = 0xfe;
|
|
|
|
|
|
|
|
const unsigned int cbw_signature = 0x43425355;
|
|
|
|
const unsigned int csw_signature = 0x53425355;
|
|
|
|
|
|
|
|
typedef struct {
|
|
|
|
unsigned int dCBWSignature;
|
|
|
|
unsigned int dCBWTag;
|
|
|
|
unsigned int dCBWDataTransferLength;
|
|
|
|
unsigned char bmCBWFlags;
|
|
|
|
unsigned long bCBWLUN:4;
|
|
|
|
unsigned long:4;
|
|
|
|
unsigned long bCBWCBLength:5;
|
|
|
|
unsigned long:3;
|
|
|
|
unsigned char CBWCB[31 - 15];
|
|
|
|
} __attribute__ ((packed))
|
|
|
|
cbw_t;
|
|
|
|
|
|
|
|
typedef struct {
|
|
|
|
unsigned int dCSWSignature;
|
|
|
|
unsigned int dCSWTag;
|
|
|
|
unsigned int dCSWDataResidue;
|
|
|
|
unsigned char bCSWStatus;
|
|
|
|
} __attribute__ ((packed))
|
|
|
|
csw_t;
|
|
|
|
|
|
|
|
static void
|
|
|
|
reset_transport (usbdev_t *dev)
|
|
|
|
{
|
|
|
|
dev_req_t dr;
|
|
|
|
memset (&dr, 0, sizeof (dr));
|
|
|
|
dr.bmRequestType = 0;
|
|
|
|
dr.data_dir = host_to_device;
|
|
|
|
#ifndef QEMU
|
|
|
|
dr.req_type = class_type;
|
|
|
|
dr.req_recp = iface_recp;
|
|
|
|
#endif
|
|
|
|
dr.bRequest = DEV_RESET;
|
|
|
|
dr.wValue = 0;
|
|
|
|
dr.wIndex = 0;
|
|
|
|
dr.wLength = 0;
|
|
|
|
dev->controller->control (dev, OUT, sizeof (dr), &dr, 0, 0);
|
|
|
|
clear_stall (MSC_INST (dev)->bulk_in);
|
|
|
|
clear_stall (MSC_INST (dev)->bulk_out);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* device may stall this command, so beware! */
|
|
|
|
static int
|
|
|
|
get_max_luns (usbdev_t *dev)
|
|
|
|
{
|
|
|
|
unsigned char luns = 75;
|
|
|
|
dev_req_t dr;
|
|
|
|
dr.bmRequestType = 0;
|
|
|
|
dr.data_dir = device_to_host;
|
|
|
|
#ifndef QEMU
|
|
|
|
dr.req_type = class_type;
|
|
|
|
dr.req_recp = iface_recp;
|
|
|
|
#endif
|
|
|
|
dr.bRequest = GET_MAX_LUN;
|
|
|
|
dr.wValue = 0;
|
|
|
|
dr.wIndex = 0;
|
|
|
|
dr.wLength = 1;
|
|
|
|
if (dev->controller->control (dev, IN, sizeof (dr), &dr, 1, &luns)) {
|
|
|
|
luns = 0; // assume only 1 lun if req fails
|
|
|
|
}
|
|
|
|
return luns;
|
|
|
|
}
|
|
|
|
|
|
|
|
int tag;
|
|
|
|
int lun = 0;
|
|
|
|
|
|
|
|
static void
|
|
|
|
wrap_cbw (cbw_t *cbw, int datalen, cbw_direction dir, const u8 *cmd,
|
|
|
|
int cmdlen)
|
|
|
|
{
|
|
|
|
memset (cbw, 0, sizeof (cbw_t));
|
|
|
|
|
|
|
|
cbw->dCBWSignature = cbw_signature;
|
|
|
|
cbw->dCBWTag = tag++;
|
|
|
|
cbw->bCBWLUN = lun; // static value per device
|
|
|
|
|
|
|
|
cbw->dCBWDataTransferLength = datalen;
|
|
|
|
cbw->bmCBWFlags = dir;
|
|
|
|
memcpy (cbw->CBWCB, cmd, sizeof (cbw->CBWCB));
|
|
|
|
cbw->bCBWCBLength = cmdlen;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
get_csw (endpoint_t *ep, csw_t *csw)
|
|
|
|
{
|
|
|
|
ep->dev->controller->bulk (ep, sizeof (csw_t), (u8 *) csw, 1);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
execute_command (usbdev_t *dev, cbw_direction dir, const u8 *cb, int cblen,
|
|
|
|
u8 *buf, int buflen)
|
|
|
|
{
|
|
|
|
cbw_t cbw;
|
|
|
|
csw_t csw;
|
|
|
|
|
|
|
|
int always_succeed = 0;
|
|
|
|
if ((cb[0] == 0x1b) && (cb[4] == 1)) { //start command, always succeed
|
|
|
|
always_succeed = 1;
|
|
|
|
}
|
|
|
|
wrap_cbw (&cbw, buflen, dir, cb, cblen);
|
|
|
|
if (dev->controller->
|
|
|
|
bulk (MSC_INST (dev)->bulk_out, sizeof (cbw), (u8 *) &cbw, 0)) {
|
|
|
|
clear_stall (MSC_INST (dev)->bulk_out);
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
mdelay (10);
|
|
|
|
if (dir == cbw_direction_data_in) {
|
|
|
|
if (dev->controller->
|
|
|
|
bulk (MSC_INST (dev)->bulk_in, buflen, buf, 0)) {
|
|
|
|
clear_stall (MSC_INST (dev)->bulk_in);
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
if (dev->controller->
|
|
|
|
bulk (MSC_INST (dev)->bulk_out, buflen, buf, 0)) {
|
|
|
|
clear_stall (MSC_INST (dev)->bulk_out);
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
get_csw (MSC_INST (dev)->bulk_in, &csw);
|
|
|
|
if (always_succeed == 1) {
|
|
|
|
// return success, regardless of message
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
if (csw.bCSWStatus == 2) {
|
|
|
|
// phase error, reset transport
|
|
|
|
reset_transport (dev);
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
if (csw.bCSWStatus == 0) {
|
|
|
|
// no error, exit
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
// error "check condition" or reserved error
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
typedef struct {
|
|
|
|
unsigned char command; //0
|
|
|
|
unsigned char res1; //1
|
|
|
|
unsigned int block; //2-5
|
|
|
|
unsigned char res2; //6
|
|
|
|
unsigned short numblocks; //7-8
|
|
|
|
unsigned char res3; //9 - the block is 10 bytes long
|
|
|
|
} __attribute__ ((packed)) cmdblock_t;
|
|
|
|
|
|
|
|
typedef struct {
|
|
|
|
unsigned char command; //0
|
|
|
|
unsigned char res1; //1
|
|
|
|
unsigned char res2; //2
|
|
|
|
unsigned char res3; //3
|
|
|
|
unsigned char lun; //4
|
|
|
|
unsigned char res4; //5
|
|
|
|
} __attribute__ ((packed)) cmdblock6_t;
|
|
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
* Reads or writes a number of sequential blocks on a USB storage device.
|
|
|
|
* As it uses the READ(10) SCSI-2 command, it's limited to storage devices
|
|
|
|
* of at most 2TB. It assumes sectors of 512 bytes.
|
|
|
|
*
|
|
|
|
* @param dev device to access
|
|
|
|
* @param start first sector to access
|
|
|
|
* @param n number of sectors to access
|
|
|
|
* @param dir direction of access: cbw_direction_data_in == read, cbw_direction_data_out == write
|
|
|
|
* @param buf buffer to read into or write from. Must be at least n*512 bytes
|
|
|
|
* @return 0 on success, 1 on failure
|
|
|
|
*/
|
|
|
|
int
|
|
|
|
readwrite_blocks (usbdev_t *dev, int start, int n, cbw_direction dir, u8 *buf)
|
|
|
|
{
|
|
|
|
cmdblock_t cb;
|
|
|
|
memset (&cb, 0, sizeof (cb));
|
|
|
|
if (dir == cbw_direction_data_in) {
|
|
|
|
// read
|
|
|
|
cb.command = 0x28;
|
|
|
|
} else {
|
|
|
|
// write
|
|
|
|
cb.command = 0x2a;
|
|
|
|
}
|
|
|
|
cb.block = ntohl (start);
|
|
|
|
cb.numblocks = ntohw (n);
|
|
|
|
return execute_command (dev, dir, (u8 *) &cb, sizeof (cb), buf,
|
|
|
|
n * 512);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
test_unit_ready (usbdev_t *dev)
|
|
|
|
{
|
|
|
|
cmdblock6_t cb;
|
|
|
|
memset (&cb, 0, sizeof (cb)); // full initialization for T-U-R
|
|
|
|
return execute_command (dev, cbw_direction_data_out, (u8 *) &cb,
|
|
|
|
sizeof (cb), 0, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
spin_up (usbdev_t *dev)
|
|
|
|
{
|
|
|
|
cmdblock6_t cb;
|
|
|
|
memset (&cb, 0, sizeof (cb));
|
|
|
|
cb.command = 0x1b;
|
|
|
|
cb.lun = 1;
|
|
|
|
return execute_command (dev, cbw_direction_data_out, (u8 *) &cb,
|
|
|
|
sizeof (cb), 0, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
read_capacity (usbdev_t *dev)
|
|
|
|
{
|
|
|
|
cmdblock_t cb;
|
|
|
|
memset (&cb, 0, sizeof (cb));
|
|
|
|
cb.command = 0x25; // read capacity
|
|
|
|
u8 buf[8];
|
2009-04-30 18:46:12 +02:00
|
|
|
|
|
|
|
printf ("Reading capacity of mass storage device.\n");
|
2008-09-02 18:06:22 +02:00
|
|
|
int count = 0;
|
|
|
|
while ((count++ < 20)
|
|
|
|
&&
|
|
|
|
(execute_command
|
|
|
|
(dev, cbw_direction_data_in, (u8 *) &cb, sizeof (cb), buf,
|
|
|
|
8) == 1));
|
|
|
|
if (count >= 20) {
|
2009-04-30 18:46:12 +02:00
|
|
|
// still not successful, assume 2tb in 512byte sectors, which is just the same garbage as any other number, but probably more usable.
|
|
|
|
printf ("Assuming 2TB in 512byte sectors as READ CAPACITY didn't answer.\n");
|
2008-09-02 18:06:22 +02:00
|
|
|
MSC_INST (dev)->numblocks = 0xffffffff;
|
|
|
|
MSC_INST (dev)->blocksize = 512;
|
|
|
|
} else {
|
|
|
|
MSC_INST (dev)->numblocks = ntohl (*(u32 *) buf) + 1;
|
|
|
|
MSC_INST (dev)->blocksize = ntohl (*(u32 *) (buf + 4));
|
|
|
|
}
|
|
|
|
printf (" has %d blocks sized %db\n", MSC_INST (dev)->numblocks,
|
|
|
|
MSC_INST (dev)->blocksize);
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
usb_msc_init (usbdev_t *dev)
|
|
|
|
{
|
|
|
|
int i, timeout;
|
|
|
|
|
|
|
|
dev->destroy = usb_msc_destroy;
|
|
|
|
dev->poll = usb_msc_poll;
|
|
|
|
|
|
|
|
configuration_descriptor_t *cd =
|
|
|
|
(configuration_descriptor_t *) dev->configuration;
|
|
|
|
interface_descriptor_t *interface =
|
|
|
|
(interface_descriptor_t *) (((char *) cd) + cd->bLength);
|
|
|
|
|
|
|
|
printf (" it uses %s command set\n",
|
|
|
|
msc_subclass_strings[interface->bInterfaceSubClass]);
|
|
|
|
printf (" it uses %s protocol\n",
|
|
|
|
msc_protocol_strings[interface->bInterfaceProtocol]);
|
|
|
|
|
|
|
|
if ((interface->bInterfaceProtocol != 0x50)
|
|
|
|
|| (interface->bInterfaceSubClass != 6)) {
|
|
|
|
/* Other protocols, such as ATAPI don't seem to be very popular. looks like ATAPI would be really easy to add, if necessary. */
|
|
|
|
printf (" Only SCSI over Bulk is supported.\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
dev->data = malloc (sizeof (usbmsc_inst_t));
|
2009-07-31 13:39:55 +02:00
|
|
|
if (!dev->data)
|
|
|
|
usb_fatal("Not enough memory for USB MSC device.\n");
|
|
|
|
|
2008-09-02 18:06:22 +02:00
|
|
|
MSC_INST (dev)->bulk_in = 0;
|
|
|
|
MSC_INST (dev)->bulk_out = 0;
|
|
|
|
|
|
|
|
for (i = 1; i <= dev->num_endp; i++) {
|
|
|
|
if (dev->endpoints[i].endpoint == 0)
|
|
|
|
continue;
|
|
|
|
if (dev->endpoints[i].type != BULK)
|
|
|
|
continue;
|
|
|
|
if ((dev->endpoints[i].direction == IN)
|
|
|
|
&& (MSC_INST (dev)->bulk_in == 0))
|
|
|
|
MSC_INST (dev)->bulk_in = &dev->endpoints[i];
|
|
|
|
if ((dev->endpoints[i].direction == OUT)
|
|
|
|
&& (MSC_INST (dev)->bulk_out == 0))
|
|
|
|
MSC_INST (dev)->bulk_out = &dev->endpoints[i];
|
|
|
|
}
|
|
|
|
|
|
|
|
if (MSC_INST (dev)->bulk_in == 0)
|
|
|
|
fatal ("couldn't find bulk-in endpoint");
|
|
|
|
if (MSC_INST (dev)->bulk_out == 0)
|
|
|
|
fatal ("couldn't find bulk-out endpoint");
|
|
|
|
printf (" using endpoint %x as in, %x as out\n",
|
|
|
|
MSC_INST (dev)->bulk_in->endpoint,
|
|
|
|
MSC_INST (dev)->bulk_out->endpoint);
|
|
|
|
|
|
|
|
printf (" has %d luns\n", get_max_luns (dev) + 1);
|
|
|
|
|
|
|
|
printf (" Waiting for device to become ready... ");
|
|
|
|
timeout = 10;
|
|
|
|
while (test_unit_ready (dev) && --timeout) {
|
|
|
|
mdelay (100);
|
|
|
|
printf (".");
|
|
|
|
}
|
|
|
|
if (test_unit_ready (dev)) {
|
|
|
|
printf ("timeout. Device not ready. Still trying...\n");
|
|
|
|
} else {
|
|
|
|
printf ("ok.\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
printf (" spin up");
|
|
|
|
for (i = 0; i < 30; i++) {
|
|
|
|
printf (".");
|
|
|
|
if (!spin_up (dev)) {
|
|
|
|
printf (" OK.");
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
mdelay (100);
|
|
|
|
}
|
|
|
|
printf ("\n");
|
|
|
|
|
|
|
|
read_capacity (dev);
|
2008-10-16 21:20:51 +02:00
|
|
|
if (usbdisk_create)
|
|
|
|
usbdisk_create (dev);
|
2008-09-02 18:06:22 +02:00
|
|
|
}
|