coreboot-kgpe-d16/Documentation/mainboard/hp/elitebook_series.md

112 lines
3.4 KiB
Markdown
Raw Normal View History

# HP EliteBook series
This document is about HP EliteBook series laptops up to Ivy Bridge era
which use SMSC KBC1126 as embedded controller.
## EC
SMSC KBC1098/KBC1126 has been used in HP EliteBooks for many generations.
They use similar EC firmware that will load other code and data from the
SPI flash chip, so we need to put some firmware blobs to the coreboot image.
The following document takes EliteBook 2760p as an example.
First, you need to extract the blobs needed by EC firmware using util/kbc1126.
You can extract them from your backup firmware image, or firmware update
provided by HP with [unar] as follows:
```bash
wget https://ftp.hp.com/pub/softpaq/sp79501-80000/sp79710.exe
unar sp79710.exe
${COREBOOT_DIR}/util/kbc1126/kbc1126_ec_dump sp79710/Rompaq/68SOU.BIN
mv 68SOU.BIN.fw1 ${COREBOOT_DIR}/2760p-fw1.bin
mv 68SOU.BIN.fw2 ${COREBOOT_DIR}/2760p-fw2.bin
```
When you config coreboot, select:
```text
Chipset --->
[*] Add firmware images for KBC1126 EC
(2760p-fw1.bin) KBC1126 firmware #1 path and filename
(2760p-fw2.bin) KBC1126 filename #2 path and filename
```
## Super I/O
EliteBook 8000 series laptops have SMSC LPC47n217 Super I/O to provide
a serial port and a parallel port, you can debug the laptop via this
serial port.
## porting
To port coreboot to an HP EliteBook laptop, you need to do the following:
- select Kconfig option `EC_HP_KBC1126`
- select Kconfig option `SUPERIO_SMSC_LPC47N217` if there is LPC47n217 Super I/O
- initialize EC and Super I/O in romstage
- add EC and Super I/O support to devicetree.cb
To get the related values for EC in devicetree.cb, you need to extract the EFI
module EcThermalInit from the vendor UEFI firmware with [UEFITool]. Usually,
`ec_data_port`, `ec_cmd_port` and `ec_ctrl_reg` has the following values:
- For xx60 series: 0x60, 0x64, 0xca
- For xx70 series: 0x62, 0x66, 0x81
You can use [radare2] and the following [r2pipe] Python script to find
these values from the EcThermalInit EFI module:
```python
#!/usr/bin/env python
# install radare2 and use `pip3 install --user r2pipe` to install r2pipe
import r2pipe
import sys
if len(sys.argv) < 2:
fn = "ecthermalinit.efi"
else:
fn = sys.argv[1]
r2 = r2pipe.open(fn)
r2.cmd("aa")
entryf = r2.cmdj("pdfj")
for insn in entryf["ops"]:
if "lea r8" in insn["opcode"]:
_callback = insn["ptr"]
break
r2.cmd("af @ {}".format(_callback))
callbackf_insns = r2.cmdj("pdfj @ {}".format(_callback))["ops"]
def find_port(addr):
ops = r2.cmdj("pdfj @ {}".format(addr))["ops"]
for insn in ops:
if "lea r8d" in insn["opcode"]:
return insn["ptr"]
ctrl_reg_found = False
for i in range(0, len(callbackf_insns)):
if not ctrl_reg_found and "mov cl" in callbackf_insns[i]["opcode"]:
ctrl_reg_found = True
ctrl_reg = callbackf_insns[i]["ptr"]
print("ec_ctrl_reg = 0x%02x" % ctrl_reg)
cmd_port = find_port(callbackf_insns[i+1]["jump"])
data_port = find_port(callbackf_insns[i+3]["jump"])
print("ec_cmd_port = 0x%02x\nec_data_port = 0x%02x" % (cmd_port, data_port))
if "mov bl" in callbackf_insns[i]["opcode"]:
ctrl_value = callbackf_insns[i]["ptr"]
print("ec_fan_ctrl_value = 0x%02x" % ctrl_value)
```
[unar]: https://theunarchiver.com/command-line
[UEFITool]: https://github.com/LongSoft/UEFITool
[radare2]: https://radare.org/
[r2pipe]: https://github.com/radare/radare2-r2pipe