GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
coreboot-kgpe-d16/payloads/external/Makefile.inc

396 lines
16 KiB
PHP
Raw Normal View History

payloads: Replace GPL boilerplate with SPDX headers Used commands: perl -i -p0e 's|\/\*[\s*]*.*is free software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and\/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-2.0-only */|' $(cat filelist) perl -i -p0e 's|\/\*[\s*]*.*is[\s*]*free[\s*]*software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*either[\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License,[\s*]*or[\s*]*.at[\s*]*your[\s*]*option.*[\s*]*any[\s*]*later[\s*]*version.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-2.0-or-later */|' $(cat filelist) perl -i -p0e 's|\/\*[\s*]*.*is[\s*#]*free[\s*#]*software[;:,][\s*#]*you[\s*#]*can[\s*#]*redistribute[\s*#]*it[\s*#]*and/or[\s*#]*modify[\s*#]*it[\s*#]*under[\s*#]*the[\s*#]*terms[\s*#]*of[\s*#]*the[\s*#]*GNU[\s*#]*General[\s*#]*Public[\s*#]*License[\s*#]*as[\s*#]*published[\s*#]*by[\s*#]*the[\s*#]*Free[\s*#]*Software[\s*#]*Foundation[;:,][\s*#]*either[\s*#]*version[\s*#]*3[\s*#]*of[\s*#]*the[\s*#]*License[;:,][\s*#]*or[\s*#]*.at[\s*#]*your[\s*#]*option.*[\s*#]*any[\s*#]*later[\s*#]*version.[\s*#]*This[\s*#]*program[\s*#]*is[\s*#]*distributed[\s*#]*in[\s*#]*the[\s*#]*hope[\s*#]*that[\s*#]*it[\s*#]*will[\s*#]*be[\s*#]*useful[;:,][\s*#]*but[\s*#]*WITHOUT[\s*#]*ANY[\s*#]*WARRANTY[;:,][\s*#]*without[\s*#]*even[\s*#]*the[\s*#]*implied[\s*#]*warranty[\s*#]*of[\s*#]*MERCHANTABILITY[\s*#]*or[\s*#]*FITNESS[\s*#]*FOR[\s*#]*A[\s*#]*PARTICULAR[\s*#]*PURPOSE.[\s*#]*See[\s*#]*the[\s*#]*GNU[\s*#]*General[\s*#]*Public[\s*#]*License[\s*#]*for[\s*#]*more[\s*#]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-3.0-or-later */|' $(cat filelist) perl -i -p0e 's|(\#\#*)[\w]*.*is free software[:;][\#\s]*you[\#\s]*can[\#\s]*redistribute[\#\s]*it[\#\s]*and\/or[\#\s]*modify[\#\s]*it[\s\#]*under[\s \#]*the[\s\#]*terms[\s\#]*of[\s\#]*the[\s\#]*GNU[\s\#]*General[\s\#]*Public[\s\#]*License[\s\#]*as[\s\#]*published[\s\#]*by[\s\#]*the[\s\#]*Free[\s\#]*Software[\s\#]*Foundation[;,][\s\#]*version[\s\#]*2[\s\#]*of[\s\#]*the[\s\#]*License.*[\s\#]*This[\s\#]*program[\s\#]*is[\s\#]*distributed[\s\#]*in[\s\#]*the[\s\#]*hope[\s\#]*that[\s\#]*it[\s\#]*will[\#\s]*be[\#\s]*useful,[\#\s]*but[\#\s]*WITHOUT[\#\s]*ANY[\#\s]*WARRANTY;[\#\s]*without[\#\s]*even[\#\s]*the[\#\s]*implied[\#\s]*warranty[\#\s]*of[\#\s]*MERCHANTABILITY[\#\s]*or[\#\s]*FITNESS[\#\s]*FOR[\#\s]*A[\#\s]*PARTICULAR[\#\s]*PURPOSE.[\#\s]*See[\#\s]*the[\#\s]*GNU[\#\s]*General[\#\s]*Public[\#\s]*License[\#\s]*for[\#\s]*more[\#\s]*details.\s(#* *\n)*|\1 SPDX-License-Identifier: GPL-2.0-only\n\n|' $(cat filelist) perl -i -p0e 's|(\#\#*)[\w*]*.*is free software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and\/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.\s(#* *\n)*|\1 SPDX-License-Identifier: GPL-2.0-only\n\n|' $(cat filelist) Change-Id: I9f74ed19257bc4234465b8f912deff1b485173f9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41179 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-08 22:50:46 +02:00
## SPDX-License-Identifier: GPL-2.0-only
payloads: Reorganize Makefile.incs for external payloads This is not going as far as I would like it to go, but some of the external payloads have to be fixed up first. Long term, I would like to directly add payloads/external/* to subdirs-y and remove one layer of indirection from the build process. For now, moving the payload Makefile targets into payloads/ is already a small improvement. Change-Id: Ie4eb492eb804e0aaaf1a4d90af2f876f27a32a75 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10829 Reviewed-by: Martin Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-01 02:09:17 +02:00
Store the payload config and revision in CBFS Store the payload config and version files in CBFS if using a SeaBIOS or filo payload if INCLUDE_CONFIG_FILE is enabled. Change-Id: I0c1b4da8f6179b9cee06cecfa76bc631b43196e0 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10607 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-06-20 04:50:59 +02:00
# set up payload config and version files for later inclusion
payloads/external: Add more option related to SeaBIOS and GRUB2 Also known as "SeaGRUB", running GRUB2 atop SeaBIOS proves to be a useful configuration, since SeaBIOS has improved its hardware compatibility. For example, some USB drive can work under SeaBIOS but do not work under native GRUB2, and GRUB2 can use BIOS call (provided by SeaBIOS) as a fallback method to access hardware if it is present. But more option is added addition to "SeaGRUB": now GRUB2 and SeaBIOS can be built as secondary payloads, and "SeaGRUB" is now implemented as "Primary SeaBIOS + Secondary GRUB2 (selected) + config files". Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Change-Id: Ie681fa231abfe4a8f1e4510b3c17957550a9d2f8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60640 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-01-01 04:56:00 +01:00
ifeq ($(CONFIG_PAYLOAD_BUILD_SEABIOS),y)
Store the payload config and revision in CBFS Store the payload config and version files in CBFS if using a SeaBIOS or filo payload if INCLUDE_CONFIG_FILE is enabled. Change-Id: I0c1b4da8f6179b9cee06cecfa76bc631b43196e0 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10607 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-06-20 04:50:59 +02:00
PAYLOAD_CONFIG=payloads/external/SeaBIOS/seabios/.config
external/Makefile.inc: Update SeaBIOS version file SeaBIOS updated how versioning is done, and out/version.c no longer exists. The new file with version information is autoversion.h. Change-Id: I10abee73ecc51e52c9ff7a2e7a9099339b1a4b40 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12567 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-11-28 21:23:48 +01:00
PAYLOAD_VERSION=payloads/external/SeaBIOS/seabios/out/autoversion.h
Store the payload config and revision in CBFS Store the payload config and version files in CBFS if using a SeaBIOS or filo payload if INCLUDE_CONFIG_FILE is enabled. Change-Id: I0c1b4da8f6179b9cee06cecfa76bc631b43196e0 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10607 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-06-20 04:50:59 +02:00
endif
ifeq ($(CONFIG_PAYLOAD_FILO),y)
PAYLOAD_CONFIG=payloads/external/FILO/filo/.config
PAYLOAD_VERSION=payloads/external/FILO/filo/build/version.h
endif
payloads: Enable building depthcharge as part of the coreboot build For CHROMEOS builds, depthcharge can be built automatically. This dependency exists because depthcharge without vboot and subsequent signing of the image doesn't work very well, and both are keyed to that flag as well. Change-Id: Id0195bd3b4e454f382782106d6512469106daac5 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/10924 Tested-by: build bot (Jenkins)
2015-07-15 19:24:18 +02:00
ifeq ($(CONFIG_PAYLOAD_DEPTHCHARGE),y)
PAYLOAD_CONFIG=payloads/external/depthcharge/depthcharge/.config
payloads/external/Makefile: Add missing dependency The depthcharge .config only exists after depthcharge was built. Other possible `PAYLOAD_CONFIG` files most probably miss a rule, too. Change-Id: I8e6f79bb2bd07cbef1317f2623bbef9ca0e74880 Signed-off-by: Nico Huber <nico.huber@secunet.com> Tested-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/22137 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-10-23 14:53:52 +02:00
$(PAYLOAD_CONFIG): payloads/external/depthcharge/depthcharge/build/depthcharge.elf
payloads/external: fix depthcharge build from source Signed-off-by: Selma BENSAID <selma.bensaid@intel.com> Change-Id: I17ae7450a9641268fe392bed0f24846abc8e6f56 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43203 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-15 22:01:32 +01:00
ifeq ($(call strip_quotes,$(CONFIG_MAINBOARD_DEPTHCHARGE)),)
depthcharge: add CONFIG_MAINBOARD_DEPTHCHARGE CONFIG_MAINBOARD_DEPTHCHARGE is used to override the Board config for depthcharge which inherit from CONFIG_MAINBOARD_PART_NUMBER. This is mainly to avoid depthcharge config duplication. Signed-off-by: Selma BENSAID <selma.bensaid@intel.com> Change-Id: I6cbc93ca38ad6deeca2c2fb7770024a24233b6f8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35510 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2019-09-21 02:38:59 +02:00
BOARD=$(call ws_to_under,$(call strip_quotes,$(call tolower,$(CONFIG_MAINBOARD_PART_NUMBER))))
Fix sarien depthcharge make build CONFIG_MAINBOARD_DEPTHCHARGE is set to "" for boards not configuring it. Signed-off-by: Selma BENSAID <selma.bensaid@intel.com> Change-Id: If61a1371ad8baf165b09ce045fc1a6c205c2c0ae Reviewed-on: https://review.coreboot.org/c/coreboot/+/36336 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-10-25 20:36:17 +02:00
else
BOARD=$(CONFIG_MAINBOARD_DEPTHCHARGE)
depthcharge: add CONFIG_MAINBOARD_DEPTHCHARGE CONFIG_MAINBOARD_DEPTHCHARGE is used to override the Board config for depthcharge which inherit from CONFIG_MAINBOARD_PART_NUMBER. This is mainly to avoid depthcharge config duplication. Signed-off-by: Selma BENSAID <selma.bensaid@intel.com> Change-Id: I6cbc93ca38ad6deeca2c2fb7770024a24233b6f8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35510 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2019-09-21 02:38:59 +02:00
endif
payloads: Enable building depthcharge as part of the coreboot build For CHROMEOS builds, depthcharge can be built automatically. This dependency exists because depthcharge without vboot and subsequent signing of the image doesn't work very well, and both are keyed to that flag as well. Change-Id: Id0195bd3b4e454f382782106d6512469106daac5 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/10924 Tested-by: build bot (Jenkins)
2015-07-15 19:24:18 +02:00
#TODO: Figure out version
endif
Store the payload config and revision in CBFS Store the payload config and version files in CBFS if using a SeaBIOS or filo payload if INCLUDE_CONFIG_FILE is enabled. Change-Id: I0c1b4da8f6179b9cee06cecfa76bc631b43196e0 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10607 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-06-20 04:50:59 +02:00
Linux/Linuxboot: share cmdline and initrd parser Merge the command-line and initramfs parser from 'a linux payload' and 'LinuxBoot'. GOAL: merge 'a Linux payload' and 'LinuxBoot' Change-Id: I2d2aef5d07453b98e115af6ee06318c690def785 Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com> Reviewed-on: https://review.coreboot.org/29510 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-06 12:32:14 +01:00
ifeq ($(CONFIG_PAYLOAD_LINUX)$(CONFIG_PAYLOAD_LINUXBOOT),y)
Makefile.inc: Move payload code to payloads/ Change-Id: I91d9537e8c78560c944c552255e703fc0e6f1f78 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14349 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-04-13 22:13:02 +02:00
ifneq ($(strip $(call strip_quotes,$(CONFIG_LINUX_COMMAND_LINE))),)
ADDITIONAL_PAYLOAD_CONFIG+=-C $(CONFIG_LINUX_COMMAND_LINE)
endif
ifneq ($(strip $(call strip_quotes,$(CONFIG_LINUX_INITRD))),)
LinuxBoot: refactor payload Clean and refactor the structure of the LinuxBoot payload integration, to make it more modular and readable. The kernel and initramfs should handled in separated makefiles. tested with: - qemu-i440fx (x86, x86_64) - cavium CN8100 (arm64) Change-Id: I41d0275a5f7efb920e881f43b0acda29f41ee221 Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com> Reviewed-on: https://review.coreboot.org/c/29581 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-11-11 18:03:26 +01:00
ifneq ($(CONFIG_LINUXBOOT_ARM64),y)
LinuxBoot: refactor u-root.mk Clean the u-root initramfs integration and add essential flags as options. Now u-root automatically fetch updates and rebuilts itself to apply changes. Change-Id: Id978ed2ebeff96c5be4f74ae07df9be76e106a1b Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com> Reviewed-on: https://review.coreboot.org/c/29778 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-11-21 17:45:43 +01:00
ADDITIONAL_PAYLOAD_CONFIG+=-I $(CONFIG_LINUX_INITRD)$(CONFIG_LINUXBOOT_INITRAMFS_SUFFIX)
LinuxBoot: refactor payload Clean and refactor the structure of the LinuxBoot payload integration, to make it more modular and readable. The kernel and initramfs should handled in separated makefiles. tested with: - qemu-i440fx (x86, x86_64) - cavium CN8100 (arm64) Change-Id: I41d0275a5f7efb920e881f43b0acda29f41ee221 Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com> Reviewed-on: https://review.coreboot.org/c/29581 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-11-11 18:03:26 +01:00
prebuilt-files += $(strip $(call strip_quotes,$(CONFIG_LINUX_INITRD)))
endif
Makefile.inc: Move payload code to payloads/ Change-Id: I91d9537e8c78560c944c552255e703fc0e6f1f78 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14349 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-04-13 22:13:02 +02:00
endif
endif
ifneq ($(strip $(call strip_quotes,$(CONFIG_PAYLOAD_OPTIONS))),)
ADDITIONAL_PAYLOAD_CONFIG+=$(strip $(call strip_quotes,$(CONFIG_PAYLOAD_OPTIONS)))
endif
payload: Fix broken Linux kernel as payload Commit 785a31d67e8f34065a2483080e4fd7032c3a8aad (Makefile.inc: Move payload code to payloads/) breaks the usage of Linux kernel as payload. The reason for it is that cbfs-files-y is evaluated before payloads/external/Makefile.inc is sourced and as a consequence ADDITIONAL_PAYLOAD_CONFIG is empty when it is used for payload options. That leads to missing command line and initrd for the kernel which in turn leads to kernel panic when it boots. To avoid it, move the code which adds payload to cbfs completely to payloads/extranal/Makefile.inc. This way, ADDITIONAL_PAYLOAD_CONFIG is set right before the payload itself is added to cbfs-files-y. I have tested this patch with a Linux kernel as well as with SeaBIOS as payload on mc_tcu3 and it works. If someone sees impact to other payloads just let me know. Change-Id: I7aad352f8b3fc1fdba1875b12648b07eba14e282 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/14579 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-05-03 09:52:12 +02:00
cbfs-files-y += $(CONFIG_CBFS_PREFIX)/payload
$(CONFIG_CBFS_PREFIX)/payload-file := $(CONFIG_PAYLOAD_FILE)
ifeq ($(CONFIG_PAYLOAD_IS_FLAT_BINARY),y)
$(CONFIG_CBFS_PREFIX)/payload-type := flat-binary
else
Revert "cbfs/payload type: Fix build warning and whitespace in name" This reverts commit 717ba748366cda19b7532897a5b8d59fc2cd25d9. This breaks seabios and a few other payloads. This is not ready for use. Change-Id: I48ebe2e2628c11e935357b900d01953882cd20dd Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/26310 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-16 03:05:07 +02:00
$(CONFIG_CBFS_PREFIX)/payload-type := payload
payload: Fix broken Linux kernel as payload Commit 785a31d67e8f34065a2483080e4fd7032c3a8aad (Makefile.inc: Move payload code to payloads/) breaks the usage of Linux kernel as payload. The reason for it is that cbfs-files-y is evaluated before payloads/external/Makefile.inc is sourced and as a consequence ADDITIONAL_PAYLOAD_CONFIG is empty when it is used for payload options. That leads to missing command line and initrd for the kernel which in turn leads to kernel panic when it boots. To avoid it, move the code which adds payload to cbfs completely to payloads/extranal/Makefile.inc. This way, ADDITIONAL_PAYLOAD_CONFIG is set right before the payload itself is added to cbfs-files-y. I have tested this patch with a Linux kernel as well as with SeaBIOS as payload on mc_tcu3 and it works. If someone sees impact to other payloads just let me know. Change-Id: I7aad352f8b3fc1fdba1875b12648b07eba14e282 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/14579 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-05-03 09:52:12 +02:00
endif
$(CONFIG_CBFS_PREFIX)/payload-compression := $(CBFS_PAYLOAD_COMPRESS_FLAG)
$(CONFIG_CBFS_PREFIX)/payload-options := $(ADDITIONAL_PAYLOAD_CONFIG)
Makefile.inc: Move addition of payload rev & config to payload makefile These files need to be added to cbfs-files after PAYLOAD_CONFIG and PAYLOAD_VERSION have been defined. Where they were before, they didn't get added to the final build. Change-Id: Ib1b230f9eb72a8c1710ef473a9f24c0fb7ec6e17 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12751 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-17 00:09:11 +01:00
cbfs-files-$(CONFIG_INCLUDE_CONFIG_FILE) += payload_config
payload_config-file := $(PAYLOAD_CONFIG)
payload_config-type := raw
cbfs-files-$(CONFIG_INCLUDE_CONFIG_FILE) += payload_revision
payload_revision-file := $(PAYLOAD_VERSION)
payload_revision-type := raw
payloads/GRUB2: Add Kconfig options for grub.cfg Change-Id: I5480d6a5f2a6bbae4222e05bbe92eb717e1aff65 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: Martin Roth <martinroth@google.com> Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/5109 Tested-by: build bot (Jenkins)
2017-01-08 06:43:01 +01:00
cbfs-files-$(CONFIG_GRUB2_INCLUDE_RUNTIME_CONFIG_FILE) += etc/grub.cfg
etc/grub.cfg-file := $(CONFIG_GRUB2_RUNTIME_CONFIG_FILE)
etc/grub.cfg-type := raw
etc/grub.cfg-required := the GRUB runtime configuration file ($(CONFIG_GRUB2_RUNTIME_CONFIG_FILE))
payloads/external/Makefile.inc: Clean up makefile - Add comments dividing the payload sections. - Move separate TINT and Memtest sections that were intermingled. Change-Id: If0bbd6e182359c5186a8b958dd2c9ab9f0e0a3f3 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17046 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-10-17 18:11:10 +02:00
# SeaBIOS
seabios integration: fix interaction with ccache SeaBIOS' build system doesn't like CC to be a compound command like "ccache gcc", so we strip things. Unfortunately with CCACHE enabled, we passed /usr/bin/ccache (or wherever it was found on the PATH). Instead use the second term in CCACHE mode. Change-Id: I905fcdc73d067e553e923e307fafceaacdefdc6c Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/11138 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-08 21:35:38 +02:00
SEABIOS_CC_OFFSET=$(if $(filter %ccache,$(HOSTCC)),2,1)
payloads/external: Add more option related to SeaBIOS and GRUB2 Also known as "SeaGRUB", running GRUB2 atop SeaBIOS proves to be a useful configuration, since SeaBIOS has improved its hardware compatibility. For example, some USB drive can work under SeaBIOS but do not work under native GRUB2, and GRUB2 can use BIOS call (provided by SeaBIOS) as a fallback method to access hardware if it is present. But more option is added addition to "SeaGRUB": now GRUB2 and SeaBIOS can be built as secondary payloads, and "SeaGRUB" is now implemented as "Primary SeaBIOS + Secondary GRUB2 (selected) + config files". Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Change-Id: Ie681fa231abfe4a8f1e4510b3c17957550a9d2f8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60640 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-01-01 04:56:00 +01:00
SEABIOS_TARGET_PATH=payloads/external/SeaBIOS/seabios/out/bios.bin.elf
$(SEABIOS_TARGET_PATH): $(DOTCONFIG)
payloads/external: Rename Makefile.inc to Makefile These makefiles are not included by anything, so they shouldn't be named Makefile.inc. Also, having them all be named 'Makefile' makes some other consolidation work I'm doing much easier. Change-Id: I1234539ba6a0a6f47d2eb0c21de3da3607c6b8de Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14130 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-16 17:39:30 +01:00
$(MAKE) -C payloads/external/SeaBIOS \
payloads: Reorganize Makefile.incs for external payloads This is not going as far as I would like it to go, but some of the external payloads have to be fixed up first. Long term, I would like to directly add payloads/external/* to subdirs-y and remove one layer of indirection from the build process. For now, moving the payload Makefile targets into payloads/ is already a small improvement. Change-Id: Ie4eb492eb804e0aaaf1a4d90af2f876f27a32a75 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10829 Reviewed-by: Martin Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-01 02:09:17 +02:00
HOSTCC="$(HOSTCC)" \
payloads/external/Makefile.inc: Don't rebuild SeaBIOS every time Currently, if SeaBIOS is set as the payload, it gets rebuilt every single time we do a build. Change it to re-build just when there’s a config change. Change-Id: Ib141f2cbf8796d449172432bb30fa4806cf90328 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13948 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-08 06:04:01 +01:00
CC=$(word $(SEABIOS_CC_OFFSET),$(CC_x86_32)) \
CFLAGS="$(patsubst $(word $(SEABIOS_CC_OFFSET),$(CC_x86_32))%,,$(wordlist $(SEABIOS_CC_OFFSET),9999,$(CC_x86_32)))" \
payloads: Reorganize Makefile.incs for external payloads This is not going as far as I would like it to go, but some of the external payloads have to be fixed up first. Long term, I would like to directly add payloads/external/* to subdirs-y and remove one layer of indirection from the build process. For now, moving the payload Makefile targets into payloads/ is already a small improvement. Change-Id: Ie4eb492eb804e0aaaf1a4d90af2f876f27a32a75 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10829 Reviewed-by: Martin Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-01 02:09:17 +02:00
LD=$(word 1,$(LD_x86_32)) LDFLAGS="$(patsubst $(word 1,$(LD_x86_32))%,,$(LD_x86_32))" \
OBJDUMP="$(OBJDUMP_x86_32)" \
OBJCOPY="$(OBJCOPY_x86_32)" STRIP="$(STRIP_x86_32)" \
AS="$(AS_x86_32)" IASL="$(IASL)" \
CONFIG_SEABIOS_MASTER=$(CONFIG_SEABIOS_MASTER) \
CONFIG_SEABIOS_STABLE=$(CONFIG_SEABIOS_STABLE) \
payloads/seabios: Add "git revision" to the SeaBIOS version menu Add an option to specify a git revision from which to build SeaBIOS. Change-Id: Ifbf3b82e784f79395ab7cd07c5804f72928d7640 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/13937 Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Tested-by: build bot (Jenkins)
2016-03-08 00:56:57 +01:00
CONFIG_SEABIOS_REVISION=$(CONFIG_SEABIOS_REVISION) \
CONFIG_SEABIOS_REVISION_ID=$(CONFIG_SEABIOS_REVISION_ID) \
payloads/external/SeaBIOS: Add option for saved SeaBIOS .config Instead of adding various SeaBIOS options into the coreboot Kconfig, just add a way to use saved SeaBIOS .config files. These files can contain full SeaBIOS .configs, but is really intended for individual options. The coreboot Kconfig options take precedence over the settings in the saved .config. Change-Id: Ia7f9c76555b8e290777207b3f637c94c4d67a782 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12568 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2015-11-28 23:44:34 +01:00
CONFIG_PAYLOAD_CONFIGFILE=$(CONFIG_PAYLOAD_CONFIGFILE) \
payloads: Reorganize Makefile.incs for external payloads This is not going as far as I would like it to go, but some of the external payloads have to be fixed up first. Long term, I would like to directly add payloads/external/* to subdirs-y and remove one layer of indirection from the build process. For now, moving the payload Makefile targets into payloads/ is already a small improvement. Change-Id: Ie4eb492eb804e0aaaf1a4d90af2f876f27a32a75 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10829 Reviewed-by: Martin Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-01 02:09:17 +02:00
CONFIG_SEABIOS_THREAD_OPTIONROMS=$(CONFIG_SEABIOS_THREAD_OPTIONROMS) \
CONFIG_SEABIOS_VGA_COREBOOT=$(CONFIG_SEABIOS_VGA_COREBOOT) \
SeaBIOS: Disable serial console if serial is memory mapped SeaBIOS only supports standard IO based serial ports. If the serial port being used by coreboot isn't a standard IO serial port, disable the serial console in the SeaBIOS build. Change-Id: I386b46625fca0bd0a5416ed9831f8370c294ed74 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13617 Tested-by: build bot (Jenkins) Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-06 20:47:05 +01:00
CONFIG_DRIVERS_UART_8250IO=$(CONFIG_DRIVERS_UART_8250IO) \
payloads/seabios: Add support for Hudson UART Since version 9332965 "serialio: Support for mmap serial ports", SeaBIOS supports memory mapped serial ports. This patch automatically configures SeaBIOS when the Hudson UART is enabled. Change-Id: I072f6a957df7e143d790783546b0725bcd597d9c Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-on: https://review.coreboot.org/18025 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-01-03 11:56:22 +01:00
CONFIG_DRIVERS_UART_8250MEM=$(CONFIG_DRIVERS_UART_8250MEM) \
CONFIG_HUDSON_UART=$(CONFIG_HUDSON_UART) \
payloads: Reorganize Makefile.incs for external payloads This is not going as far as I would like it to go, but some of the external payloads have to be fixed up first. Long term, I would like to directly add payloads/external/* to subdirs-y and remove one layer of indirection from the build process. For now, moving the payload Makefile targets into payloads/ is already a small improvement. Change-Id: Ie4eb492eb804e0aaaf1a4d90af2f876f27a32a75 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10829 Reviewed-by: Martin Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-01 02:09:17 +02:00
CONFIG_CONSOLE_SERIAL=$(CONFIG_CONSOLE_SERIAL) \
SeaBIOS: Add Kconfig option to set verbosity level Previously SeaBIOS's default was used (1). This patch defaults to coreboot's console level instead which is approximately the same verbosity as SeaBIOS and thus what a user would probably expect. Change-Id: If79e5f40c9380bb527f870eeb7d0cb43faf00beb Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/18051 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-15 11:49:25 +01:00
CONFIG_TTYS0_BASE=$(CONFIG_TTYS0_BASE) \
payloads/SeaBIOS: Add different MMIO uart configurations The MMIO address can change for different platforms like Apollolake. Change-Id: I6ec72d3a14f00212323a04e20d5a477dbc26b770 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/22631 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-11-29 16:58:05 +01:00
CONFIG_SEABIOS_DEBUG_LEVEL=$(CONFIG_SEABIOS_DEBUG_LEVEL) \
CONFIG_DRIVERS_UART_8250MEM_32=$(CONFIG_DRIVERS_UART_8250MEM_32) \
CONFIG_ENABLE_HSUART=$(CONFIG_ENABLE_HSUART) \
payloads/external/Makefile.inc: Pass hardware IRQ option to SeaBIOS Makefile The hardware IRQ option was not passed to SeaBIOS Makefile and resulted in HARDWARE_IRQ being permanently disabled regardless of Kconfig selection in coreboot. On platforms that need the hardware IRQ it caused hangs at boot menu or iPXE prompts. TEST=enter SeaBIOS boot menu on Libretrend LT1000 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Iafcfd743177bbcd1ee23e227c74dd8268c4c23c6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-07 15:14:24 +02:00
CONFIG_CONSOLE_UART_BASE_ADDRESS=$(CONFIG_CONSOLE_UART_BASE_ADDRESS) \
CONFIG_SEABIOS_HARDWARE_IRQ=$(CONFIG_SEABIOS_HARDWARE_IRQ)
payloads: Reorganize Makefile.incs for external payloads This is not going as far as I would like it to go, but some of the external payloads have to be fixed up first. Long term, I would like to directly add payloads/external/* to subdirs-y and remove one layer of indirection from the build process. For now, moving the payload Makefile targets into payloads/ is already a small improvement. Change-Id: Ie4eb492eb804e0aaaf1a4d90af2f876f27a32a75 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10829 Reviewed-by: Martin Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-01 02:09:17 +02:00
payloads/external: Add more option related to SeaBIOS and GRUB2 Also known as "SeaGRUB", running GRUB2 atop SeaBIOS proves to be a useful configuration, since SeaBIOS has improved its hardware compatibility. For example, some USB drive can work under SeaBIOS but do not work under native GRUB2, and GRUB2 can use BIOS call (provided by SeaBIOS) as a fallback method to access hardware if it is present. But more option is added addition to "SeaGRUB": now GRUB2 and SeaBIOS can be built as secondary payloads, and "SeaGRUB" is now implemented as "Primary SeaBIOS + Secondary GRUB2 (selected) + config files". Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Change-Id: Ie681fa231abfe4a8f1e4510b3c17957550a9d2f8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60640 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-01-01 04:56:00 +01:00
payloads/external/SeaBIOS/seabios/out/vgabios.bin: $(SEABIOS_TARGET_PATH)
payloads/external/SeaBIOS/seabios/.config: $(SEABIOS_TARGET_PATH)
payloads/external/SeaBIOS/seabios/out/autoversion.h: $(SEABIOS_TARGET_PATH)
cbfs-files-$(CONFIG_SEABIOS_SECONDARY_PAYLOAD) += img/seabios
img/seabios-file := $(SEABIOS_TARGET_PATH)
img/seabios-type := payload
img/seabios-compression := $(CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG)
build system: add dependencies for SeaBIOS output Change-Id: I7b9f1574f6d487c0a6e5c9095c25ee973a96fa89 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/12577 Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2015-11-30 20:00:33 +01:00
SeaBIOS: Add option to include a bootorder file in cbfs Including the SeaBIOS bootorder file seems to be a fairly common desire, so let's make it easy. Change-Id: Ib0874dee46215287b09c0b52648072ef3ff06ec5 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15076 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2016-06-05 18:30:34 +02:00
# add a SeaBIOS bootorder file
ifneq ($(strip $(CONFIG_SEABIOS_BOOTORDER_FILE)),)
cbfs-files-y += bootorder
bootorder-file := $(strip $(CONFIG_SEABIOS_BOOTORDER_FILE))
bootorder-type := raw
endif
Makefile.inc: Move adding SeaBIOS cbfs config files Using the INTERMEDIATE target this can be done in the proper dir. Change-Id: Ie105231655ef4b49234f0944f638545fe79f07cb Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46415 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-14 16:46:02 +02:00
ifneq ($(CONFIG_SEABIOS_PS2_TIMEOUT),)
ifneq ($(CONFIG_SEABIOS_PS2_TIMEOUT),0)
build system: Always add coreboot.pre dependency to intermediates They all operate on that file, so just add it globally. Change-Id: I953975a4078d0f4a5ec0b6248f0dcedada69afb2 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-01-13 09:15:07 +01:00
$(call add_intermediate, seabios_ps2_timeout, $(CBFSTOOL))
Makefile.inc: Move adding SeaBIOS cbfs config files Using the INTERMEDIATE target this can be done in the proper dir. Change-Id: Ie105231655ef4b49234f0944f638545fe79f07cb Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46415 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-14 16:46:02 +02:00
@printf " SeaBIOS Wait up to $(CONFIG_SEABIOS_PS2_TIMEOUT) ms for PS/2 keyboard controller initialization\n"
payloads/external: Update cbfs-ints with CONFIG_UPDATE_IMAGE Change-Id: Icfbfff3ba680a85eb2f683867064b19f40b9d40f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48898 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-24 12:15:38 +01:00
$(if $(CONFIG_UPDATE_IMAGE),-$(CBFSTOOL) $< remove -n etc/ps2-keyboard-spinup 2>/dev/null)
Makefile.inc: Move adding SeaBIOS cbfs config files Using the INTERMEDIATE target this can be done in the proper dir. Change-Id: Ie105231655ef4b49234f0944f638545fe79f07cb Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46415 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-14 16:46:02 +02:00
$(CBFSTOOL) $< add-int -i $(CONFIG_SEABIOS_PS2_TIMEOUT) -n etc/ps2-keyboard-spinup
endif
endif
ifeq ($(CONFIG_SEABIOS_ADD_SERCON_PORT_FILE),y)
build system: Always add coreboot.pre dependency to intermediates They all operate on that file, so just add it globally. Change-Id: I953975a4078d0f4a5ec0b6248f0dcedada69afb2 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-01-13 09:15:07 +01:00
$(call add_intermediate, seabios_sercon, $(CBFSTOOL))
Makefile.inc: Move adding SeaBIOS cbfs config files Using the INTERMEDIATE target this can be done in the proper dir. Change-Id: Ie105231655ef4b49234f0944f638545fe79f07cb Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46415 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-14 16:46:02 +02:00
@printf " SeaBIOS Add sercon-port file\n"
payloads/external: Update cbfs-ints with CONFIG_UPDATE_IMAGE Change-Id: Icfbfff3ba680a85eb2f683867064b19f40b9d40f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48898 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-24 12:15:38 +01:00
$(if $(CONFIG_UPDATE_IMAGE),-$(CBFSTOOL) $< remove -n etc/sercon-port 2>/dev/null)
payloads/external/Makefile.inc: Fix SeaBIOS option regressions Commit 14ca7407196 (Makefile.inc: Move adding SeaBIOS cbfs config files) introduced various regressions that were not spotted during review. TEST=Building with SEABIOS_THREAD_OPTIONROMS is working properly again. Change-Id: I4de0b11747e3df8dd31a85160add129d8cc6bd8a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47814 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-20 18:28:38 +01:00
$(CBFSTOOL) $< add-int -i $(CONFIG_SEABIOS_SERCON_PORT_ADDR) -n etc/sercon-port
Makefile.inc: Move adding SeaBIOS cbfs config files Using the INTERMEDIATE target this can be done in the proper dir. Change-Id: Ie105231655ef4b49234f0944f638545fe79f07cb Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46415 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-14 16:46:02 +02:00
endif
ifeq ($(CONFIG_SEABIOS_THREAD_OPTIONROMS),y)
build system: Always add coreboot.pre dependency to intermediates They all operate on that file, so just add it globally. Change-Id: I953975a4078d0f4a5ec0b6248f0dcedada69afb2 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-01-13 09:15:07 +01:00
$(call add_intermediate, seabios_thread_optionroms, $(CBFSTOOL))
Makefile.inc: Move adding SeaBIOS cbfs config files Using the INTERMEDIATE target this can be done in the proper dir. Change-Id: Ie105231655ef4b49234f0944f638545fe79f07cb Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46415 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-14 16:46:02 +02:00
@printf " SeaBIOS Thread optionroms\n"
payloads/external: Update cbfs-ints with CONFIG_UPDATE_IMAGE Change-Id: Icfbfff3ba680a85eb2f683867064b19f40b9d40f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48898 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-24 12:15:38 +01:00
$(if $(CONFIG_UPDATE_IMAGE),-$(CBFSTOOL) $< remove -n etc/threads 2>/dev/null)
payloads/external/Makefile.inc: Fix SeaBIOS option regressions Commit 14ca7407196 (Makefile.inc: Move adding SeaBIOS cbfs config files) introduced various regressions that were not spotted during review. TEST=Building with SEABIOS_THREAD_OPTIONROMS is working properly again. Change-Id: I4de0b11747e3df8dd31a85160add129d8cc6bd8a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47814 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-20 18:28:38 +01:00
$(CBFSTOOL) $< add-int -i 2 -n etc/threads
Makefile.inc: Move adding SeaBIOS cbfs config files Using the INTERMEDIATE target this can be done in the proper dir. Change-Id: Ie105231655ef4b49234f0944f638545fe79f07cb Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46415 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-14 16:46:02 +02:00
endif
payloads/external: Add more option related to SeaBIOS and GRUB2 Also known as "SeaGRUB", running GRUB2 atop SeaBIOS proves to be a useful configuration, since SeaBIOS has improved its hardware compatibility. For example, some USB drive can work under SeaBIOS but do not work under native GRUB2, and GRUB2 can use BIOS call (provided by SeaBIOS) as a fallback method to access hardware if it is present. But more option is added addition to "SeaGRUB": now GRUB2 and SeaBIOS can be built as secondary payloads, and "SeaGRUB" is now implemented as "Primary SeaBIOS + Secondary GRUB2 (selected) + config files". Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Change-Id: Ie681fa231abfe4a8f1e4510b3c17957550a9d2f8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60640 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-01-01 04:56:00 +01:00
ifeq ($(CONFIG_PAYLOAD_SEAGRUB),y)
ifneq ($(CONFIG_SEAGRUB_ALLOW_SEABIOS_BOOTMENU),y)
$(call add_intermediate, seabios_bootmenu, $(CBFSTOOL))
@printf " SeaBIOS Disable boot menu\n"
$(if $(CONFIG_UPDATE_IMAGE),-$(CBFSTOOL) $< remove -n etc/show-boot-menu 2>/dev/null)
$(CBFSTOOL) $< add-int -i 0 -n etc/show-boot-menu
else
$(call add_intermediate, seabios_bootmenu, $(CBFSTOOL))
$(if $(CONFIG_UPDATE_IMAGE),-$(CBFSTOOL) $< remove -n etc/show-boot-menu 2>/dev/null)
endif
endif
payloads/external/Makefile.inc: Clean up makefile - Add comments dividing the payload sections. - Move separate TINT and Memtest sections that were intermingled. Change-Id: If0bbd6e182359c5186a8b958dd2c9ab9f0e0a3f3 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17046 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-10-17 18:11:10 +02:00
# Depthcharge
Makefile: Include $(top) in DOTCONFIG definition to allow override Including $(top) in the DOTCONFIG definition allows getting rid of the $(top) prefix in payloads, which in turns allows providing a full path for DOTCONFIG via the command line. Change-Id: I7546a12cf4a2a146e32fef81121f45f83ba67ac8 Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: https://review.coreboot.org/15826 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-07-24 12:25:07 +02:00
payloads/external/depthcharge/depthcharge/build/depthcharge.elf depthcharge: $(DOTCONFIG) $(CBFSTOOL)
payloads/external: Rename Makefile.inc to Makefile These makefiles are not included by anything, so they shouldn't be named Makefile.inc. Also, having them all be named 'Makefile' makes some other consolidation work I'm doing much easier. Change-Id: I1234539ba6a0a6f47d2eb0c21de3da3607c6b8de Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14130 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-16 17:39:30 +01:00
$(MAKE) -C payloads/external/depthcharge \
depthcharge: add CONFIG_MAINBOARD_DEPTHCHARGE CONFIG_MAINBOARD_DEPTHCHARGE is used to override the Board config for depthcharge which inherit from CONFIG_MAINBOARD_PART_NUMBER. This is mainly to avoid depthcharge config duplication. Signed-off-by: Selma BENSAID <selma.bensaid@intel.com> Change-Id: I6cbc93ca38ad6deeca2c2fb7770024a24233b6f8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35510 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2019-09-21 02:38:59 +02:00
BOARD=$(BOARD) \
payloads/depthcharge: Specify revision to build Add the capability for specifying which version of depthcharge to checkout and build. This is similar to the existing feature for SeaBIOS. The depthcharge makefile already contains some structure for checking out master vs. stable however the calling Makefile.inc ingored this feature. Add the command-line variable assignment for these, along with a tree-ish for any revision. Change-Id: I99a5b088cb0ebb29e5d96a84217b3bfa852de8ac Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/18270 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-23 00:16:48 +01:00
MFLAGS= MAKEFLAGS= \
DEPTHCHARGE_MASTER=$(CONFIG_DEPTHCHARGE_MASTER) \
DEPTHCHARGE_STABLE=$(CONFIG_DEPTHCHARGE_STABLE) \
DEPTHCHARGE_REVISION=$(CONFIG_DEPTHCHARGE_REVISION) \
payloads/depthcharge: Allow generic libpayload config Change depthcharge to not require a board-specific config file for libpayload. If the Kconfig option is selected, use the settings in libpayload/configs/defconfig instead. Change-Id: I4fd1a5915472f28e757c62f3f2415716f1fdfc71 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/18271 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-23 02:25:29 +01:00
DEPTHCHARGE_REVISION_ID=$(CONFIG_DEPTHCHARGE_REVISION_ID) \
OVERRIDE_DEFCONFIG=$(CONFIG_LP_DEFCONFIG_OVERRIDE)
payloads: Enable building depthcharge as part of the coreboot build For CHROMEOS builds, depthcharge can be built automatically. This dependency exists because depthcharge without vboot and subsequent signing of the image doesn't work very well, and both are keyed to that flag as well. Change-Id: Id0195bd3b4e454f382782106d6512469106daac5 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/10924 Tested-by: build bot (Jenkins)
2015-07-15 19:24:18 +02:00
payloads/external/tianocore: build UEFI payload Update the existing tianocore payload (which didn't do any more than adding an elf payload with a specific name) to fetch and build the UEFI corebootPayloadPackage, using the coreboot toolchain for compilation. Only checkout the commit when changing commit IDs or if version is master, instead of every time it builds. Currently working if patches are merged into the upstream edk2 repository (to be included in a follow-on patch). Change-Id: I0bf4cedec2d6821ae2a04184ebb5cf88979ccee3 Signed-off-by: Martin Roth <martinroth@google.com> Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Signed-off-by: Evelyn Huang <evhuang@google.com> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/15057 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-06-03 00:42:29 +02:00
# Tianocore
payloads/tianocore: Rework Makefile Rework edkii makefile so that the various build options are unified between CorebootPayloadPkg, uefipayload_202107 and upstream. This sets the project directory based on the git repository name i.e. https://github.com/mrchromebox/edk2 becomes mrchomebox Also builds to $(obj)/UEFIPAYLOAD.fd and allows using a commit ID without a branch. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I3cc274e7385dd71c2aae315162cc48444b7eaa5f Reviewed-on: https://review.coreboot.org/c/coreboot/+/61620 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Martin Roth - Personal <martinroth@google.com>
2022-02-04 08:41:16 +01:00
$(obj)/UEFIPAYLOAD.fd tianocore: $(DOTCONFIG)
payloads/external/tianocore: build UEFI payload Update the existing tianocore payload (which didn't do any more than adding an elf payload with a specific name) to fetch and build the UEFI corebootPayloadPackage, using the coreboot toolchain for compilation. Only checkout the commit when changing commit IDs or if version is master, instead of every time it builds. Currently working if patches are merged into the upstream edk2 repository (to be included in a follow-on patch). Change-Id: I0bf4cedec2d6821ae2a04184ebb5cf88979ccee3 Signed-off-by: Martin Roth <martinroth@google.com> Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Signed-off-by: Evelyn Huang <evhuang@google.com> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/15057 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-06-03 00:42:29 +02:00
$(MAKE) -C payloads/external/tianocore all \
HOSTCC="$(HOSTCC)" \
CC="$(HOSTCC)" \
payloads/tianocore: Rework Makefile Rework edkii makefile so that the various build options are unified between CorebootPayloadPkg, uefipayload_202107 and upstream. This sets the project directory based on the git repository name i.e. https://github.com/mrchromebox/edk2 becomes mrchomebox Also builds to $(obj)/UEFIPAYLOAD.fd and allows using a commit ID without a branch. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I3cc274e7385dd71c2aae315162cc48444b7eaa5f Reviewed-on: https://review.coreboot.org/c/coreboot/+/61620 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Martin Roth - Personal <martinroth@google.com>
2022-02-04 08:41:16 +01:00
CONFIG_TIANOCORE_REPOSITORY=$(CONFIG_TIANOCORE_REPOSITORY) \
CONFIG_TIANOCORE_TAG_OR_REV=$(CONFIG_TIANOCORE_TAG_OR_REV) \
payloads/tianocore: Enable UEFIPayload corebootpayload package in upstream TianoCore was replaced with UEFIPayload, add external payload build option for UEFIPayload. BUG=N/A TEST=Select TianoCore payload as UEFIPayload, build and able to boot up on QEMU q35 after PCIE_BASE set. Change-Id: I0b7785fde9f4113b2cd91323ac0358b229c5a6e6 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34459 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-20 07:06:03 +02:00
CONFIG_TIANOCORE_UEFIPAYLOAD=$(CONFIG_TIANOCORE_UEFIPAYLOAD) \
payloads/Tianocore: Update default build target, simplify build options Drop the deprecated COREBOOTPAYLOAD option, and replace it with MrChromebox's updated UefiPayloadPkg option. Simplify the Kconfig options to make it easier to build from upstream edk2 master. Drop the TIANOCORE_USE_8254_TIMER Kconfig option since it applied only to CorebootPayloadPkg. Clean up the Makefile now that we're only building from a single Tianocore package/target. Test: build/boot qemu Q35 target with both UefiPayload and Upstream options. Change-Id: If545fbd0c30be6dcc6ff43107b80980fa23a527e Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54019 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-10 18:02:13 +02:00
CONFIG_TIANOCORE_UPSTREAM=$(CONFIG_TIANOCORE_UPSTREAM) \
payloads/tianocore: Allow custom build parameters Currently, custom TianoCore builds are allowed, but those may need different parameters. Add a Kconfig option to specify additional parameters to be appended to build command. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com> Change-Id: I025459ae94592103b4be0c68b422100b7c649d34 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62497 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-02-23 16:55:24 +01:00
CONFIG_TIANOCORE_CUSTOM=$(CONFIG_TIANOCORE_CUSTOM) \
payloads/tianocore/Makefile.inc: Alphabetise Kconfig options Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I12a18acd24a0aede8113e1daa607c852eba67049 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65160 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2022-06-15 23:08:23 +02:00
CONFIG_TIANOCORE_CUSTOM_BUILD_PARAMS=$(CONFIG_TIANOCORE_CUSTOM_BUILD_PARAMS) \
payloads/tianocore: Rework Makefile Rework edkii makefile so that the various build options are unified between CorebootPayloadPkg, uefipayload_202107 and upstream. This sets the project directory based on the git repository name i.e. https://github.com/mrchromebox/edk2 becomes mrchomebox Also builds to $(obj)/UEFIPAYLOAD.fd and allows using a commit ID without a branch. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I3cc274e7385dd71c2aae315162cc48444b7eaa5f Reviewed-on: https://review.coreboot.org/c/coreboot/+/61620 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Martin Roth - Personal <martinroth@google.com>
2022-02-04 08:41:16 +01:00
CONFIG_TIANOCORE_DEBUG=$(CONFIG_TIANOCORE_DEBUG) \
CONFIG_TIANOCORE_RELEASE=$(CONFIG_TIANOCORE_RELEASE) \
payloads/external/tianocore: Add build argument for 4G Decode Add Kconfig option TIANOCORE_ABOVE_4G_DECODE to pass build option to edk2 to enable or disable "Above 4G Decode". Disabling allows certain Linux distributions to boot such as Qubes, Zorin and Proxmox. Requires commit `2f6d4cbcc7fa49462e607baed7626524ccd59ad3` that is present in the `uefipayload_202107` branch of MrChromebox's edk2 repository. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ia3b1d15196c0ec611431af29031682fea626d19d Reviewed-on: https://review.coreboot.org/c/coreboot/+/56223 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2021-07-12 20:35:51 +02:00
CONFIG_TIANOCORE_ABOVE_4G_MEMORY=$(CONFIG_TIANOCORE_ABOVE_4G_MEMORY) \
payloads/tianocore: Rework Makefile Rework edkii makefile so that the various build options are unified between CorebootPayloadPkg, uefipayload_202107 and upstream. This sets the project directory based on the git repository name i.e. https://github.com/mrchromebox/edk2 becomes mrchomebox Also builds to $(obj)/UEFIPAYLOAD.fd and allows using a commit ID without a branch. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I3cc274e7385dd71c2aae315162cc48444b7eaa5f Reviewed-on: https://review.coreboot.org/c/coreboot/+/61620 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Martin Roth - Personal <martinroth@google.com>
2022-02-04 08:41:16 +01:00
CONFIG_TIANOCORE_BOOTSPLASH_FILE=$(CONFIG_TIANOCORE_BOOTSPLASH_FILE) \
payloads/tianocore: Add option to use Escape for Boot Manager Add TIANOCORE_BOOT_MANAGER_ESCAPE which, when enabled, will use Escape as the hot-key to access the Boot Manager. This replaces the default key of F2. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I1e60d116367542f55f0ffa241a6132e4faabe446 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61757 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2022-02-09 09:25:39 +01:00
CONFIG_TIANOCORE_BOOT_MANAGER_ESCAPE=$(CONFIG_TIANOCORE_BOOT_MANAGER_ESCAPE) \
payloads/tianocore: Add Kconfig to set boot timeout Add a Kconfig option to set the tianocore boot timeout, which is passed to the payload via a command line parameter. Allows boards without an internal display (eg) to set a longer boot timeout, in order to ensure the boot splash/menu prompt are visible upon boot. The associated changes on the tianocore side have already been merged into MrChromebox's CorebootPayloadPkg and UefiPayloadPkg branches (coreboot_fb and uefipayloadpkg respectively). Change-Id: Ifeaadff05f6667d642c05b81f53c1d2dbc450af6 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-11-30 05:11:52 +01:00
CONFIG_TIANOCORE_BOOT_TIMEOUT=$(CONFIG_TIANOCORE_BOOT_TIMEOUT) \
payloads/tianocore: Add Kconfig option to enable cbmem logging Logging to coreboot cbmem, instead of a serial console, was added to MrChromebox's uefipayloadpkg branch. Add a Kconfig option to enable this, and restrict it to the UEFIPAYLOAD payload option, since this feature does not exist in upstream edk2. Change-Id: Idef125235dc7ba885eb22ac69c6f752588a9e295 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55144 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
2021-06-02 22:19:38 +02:00
CONFIG_TIANOCORE_CBMEM_LOGGING=$(CONFIG_TIANOCORE_CBMEM_LOGGING) \
payloads/tianocore: Add option to use follow BGRT spec Adds TIANOCORE_FOLLOW_BGRT_SPEC which, when enabled, will follow the BGRT Specification implemented by Microsoft and the Boot Logo will be vertically centered 38.2% from the top of the display. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: If508166fe657d1cc032dd09a0fa231c7b60d9846 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61758 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2022-02-09 09:27:29 +01:00
CONFIG_TIANOCORE_FOLLOW_BGRT_SPEC=$(CONFIG_TIANOCORE_FOLLOW_BGRT_SPEC) \
payloads/tianocore: Bind the PCDs for screen size to Kconfig Bind the PCDs that allow edk2 to use the whole display to a Kconfig option called TIANOCORE_FULL_SCREEN_SETUP. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ic977a199f3b308c566391e37f126c4fe518b2eb6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66162 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-07-26 17:50:00 +02:00
CONFIG_TIANOCORE_FULL_SCREEN_SETUP=$(CONFIG_TIANOCORE_FULL_SCREEN_SETUP) \
payloads/tianocore: Add option to include EFI Shell Add TIANOCORE_HAVE_EFI_SHELL, which when enabled, will build edk2 with the EFI Shell binary. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I1272f514e3f5becfe1fddd58ca0d820c5d1c1b54 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61759 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2022-02-09 09:30:07 +01:00
CONFIG_TIANOCORE_HAVE_EFI_SHELL=$(CONFIG_TIANOCORE_HAVE_EFI_SHELL) \
payloads/tianocore: Add option for to prioritize internal devices Add TIANOCORE_PRIORITIZE_INTERNAL which, when enabled, will build edk2 with boot from internal devices before external devices. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ib1f73c8f3f2f2376cdc197b58d259446dc5f0138 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61797 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2022-02-10 10:21:50 +01:00
CONFIG_TIANOCORE_PRIORITIZE_INTERNAL=$(CONFIG_TIANOCORE_PRIORITIZE_INTERNAL) \
payloads/tianocore: Add option for PS/2 keyboard support Add TIANOCORE_PS2_SUPPORT which, when enabled, will build edk2 with PS/2 keyboard support. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ibabce6ac1ac68ab958610d42c77f3c2c494528ef Reviewed-on: https://review.coreboot.org/c/coreboot/+/61760 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2022-02-09 09:31:24 +01:00
CONFIG_TIANOCORE_PS2_SUPPORT=$(CONFIG_TIANOCORE_PS2_SUPPORT) \
payloads/tianocore: Add missing CONFIG for SERIAL_SUPPORT This caused edk2 serial output to be disabled 100% of the time. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: If272369b405e7745fe82f49026cbed0abc50f355 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66160 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-07-26 17:38:04 +02:00
CONFIG_TIANOCORE_SERIAL_SUPPORT=$(CONFIG_TIANOCORE_SERIAL_SUPPORT) \
payloads/tianocore: Pass SD_MMC_TIMEOUT build option By default, edk2 allows 1000000μs for SD Card Readers and eMMC to initialize which is excessive and causes a boot delay. This makes the value configurable and uses a default of 1000μs which is sufficient for the majority of readers. The value of 1000μs was hardcoded in MrChromeBox's fork for around 2 years with no reported issues. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I873bcddf6f37a9eaae5c84991b3996d51fb460d3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61902 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2022-02-13 22:19:19 +01:00
CONFIG_TIANOCORE_SD_MMC_TIMEOUT=$(CONFIG_TIANOCORE_SD_MMC_TIMEOUT) \
payloads/tianocore: Rework Makefile Rework edkii makefile so that the various build options are unified between CorebootPayloadPkg, uefipayload_202107 and upstream. This sets the project directory based on the git repository name i.e. https://github.com/mrchromebox/edk2 becomes mrchomebox Also builds to $(obj)/UEFIPAYLOAD.fd and allows using a commit ID without a branch. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I3cc274e7385dd71c2aae315162cc48444b7eaa5f Reviewed-on: https://review.coreboot.org/c/coreboot/+/61620 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Martin Roth - Personal <martinroth@google.com>
2022-02-04 08:41:16 +01:00
CONFIG_ECAM_MMCONF_BASE_ADDRESS=$(CONFIG_ECAM_MMCONF_BASE_ADDRESS) \
payloads/tianocore: Hook up PCI Express Base Address and Length Hook up edk2 build options PCIE_BASE_ADDRESS and PCIE_BASE_LENGTH to CONFIG_ECAM_MMCONF_BASE_ADDRESS and CONFIG_ECAM_MMCONF_LENGTH. This patch has been reviewed upstream but not yet merged (2022/07/08). It won't cause any problems for any existing branches or forks that do not have this build option hooked up. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ie5d50cc4619354d3c98adf6cde12c192be759869 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65644 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-07-04 22:44:32 +02:00
CONFIG_ECAM_MMCONF_LENGTH=$(CONFIG_ECAM_MMCONF_LENGTH) \
payloads/tianocore: Use SMMSTORE when branch is MrChromeBox SMMSTORE support in edk2 was not allowed in upstream edk2 as it was bootloader specific. Shortly, it will be built from edk2-platforms and then, it will be retired. For now, the patches exist in the MrChromeBox fork (TIANOCORE_UEFIPAYLOAD), so enable these by default when SMMSTORE_v2 is enabled. Change-Id: I1861bf739c2e25f661b4f06a303348f0537dc8b3 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65867 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-15 01:05:38 +02:00
CONFIG_SMMSTORE_V2=$(CONFIG_SMMSTORE_V2) \
payloads/external/tianocore: build UEFI payload Update the existing tianocore payload (which didn't do any more than adding an elf payload with a specific name) to fetch and build the UEFI corebootPayloadPackage, using the coreboot toolchain for compilation. Only checkout the commit when changing commit IDs or if version is master, instead of every time it builds. Currently working if patches are merged into the upstream edk2 repository (to be included in a follow-on patch). Change-Id: I0bf4cedec2d6821ae2a04184ebb5cf88979ccee3 Signed-off-by: Martin Roth <martinroth@google.com> Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Signed-off-by: Evelyn Huang <evhuang@google.com> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/15057 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-06-03 00:42:29 +02:00
GCC_CC_x86_32=$(GCC_CC_x86_32) \
GCC_CC_x86_64=$(GCC_CC_x86_64) \
GCC_CC_arm=$(GCC_CC_arm) \
GCC_CC_arm64=$(GCC_CC_arm64) \
OBJCOPY_x86_32=$(OBJCOPY_x86_32) \
OBJCOPY_x86_64=$(OBJCOPY_x86_64) \
OBJCOPY_arm=$(OBJCOPY_arm) \
OBJCOPY_arm64=$(OBJCOPY_arm64) \
MFLAGS= MAKEFLAGS=
payloads/tianocore: Rework Makefile Rework edkii makefile so that the various build options are unified between CorebootPayloadPkg, uefipayload_202107 and upstream. This sets the project directory based on the git repository name i.e. https://github.com/mrchromebox/edk2 becomes mrchomebox Also builds to $(obj)/UEFIPAYLOAD.fd and allows using a commit ID without a branch. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I3cc274e7385dd71c2aae315162cc48444b7eaa5f Reviewed-on: https://review.coreboot.org/c/coreboot/+/61620 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Martin Roth - Personal <martinroth@google.com>
2022-02-04 08:41:16 +01:00
mv payloads/external/tianocore/output/UEFIPAYLOAD.fd $@
payloads/external/tianocore: build UEFI payload Update the existing tianocore payload (which didn't do any more than adding an elf payload with a specific name) to fetch and build the UEFI corebootPayloadPackage, using the coreboot toolchain for compilation. Only checkout the commit when changing commit IDs or if version is master, instead of every time it builds. Currently working if patches are merged into the upstream edk2 repository (to be included in a follow-on patch). Change-Id: I0bf4cedec2d6821ae2a04184ebb5cf88979ccee3 Signed-off-by: Martin Roth <martinroth@google.com> Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Signed-off-by: Evelyn Huang <evhuang@google.com> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/15057 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-06-03 00:42:29 +02:00
payloads/external/Makefile.inc: Clean up makefile - Add comments dividing the payload sections. - Move separate TINT and Memtest sections that were intermingled. Change-Id: If0bbd6e182359c5186a8b958dd2c9ab9f0e0a3f3 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17046 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-10-17 18:11:10 +02:00
# FILO
payloads: Reorganize Makefile.incs for external payloads This is not going as far as I would like it to go, but some of the external payloads have to be fixed up first. Long term, I would like to directly add payloads/external/* to subdirs-y and remove one layer of indirection from the build process. For now, moving the payload Makefile targets into payloads/ is already a small improvement. Change-Id: Ie4eb492eb804e0aaaf1a4d90af2f876f27a32a75 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10829 Reviewed-by: Martin Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-01 02:09:17 +02:00
filo:
payloads/external: Rename Makefile.inc to Makefile These makefiles are not included by anything, so they shouldn't be named Makefile.inc. Also, having them all be named 'Makefile' makes some other consolidation work I'm doing much easier. Change-Id: I1234539ba6a0a6f47d2eb0c21de3da3607c6b8de Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14130 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-16 17:39:30 +01:00
$(MAKE) -C payloads/external/FILO \
payloads: Reorganize Makefile.incs for external payloads This is not going as far as I would like it to go, but some of the external payloads have to be fixed up first. Long term, I would like to directly add payloads/external/* to subdirs-y and remove one layer of indirection from the build process. For now, moving the payload Makefile targets into payloads/ is already a small improvement. Change-Id: Ie4eb492eb804e0aaaf1a4d90af2f876f27a32a75 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10829 Reviewed-by: Martin Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-01 02:09:17 +02:00
HOSTCC="$(HOSTCC)" \
CC="$(CC_x86_32)" LD="$(LD_x86_32)" OBJDUMP="$(OBJDUMP_x86_32)" \
OBJCOPY="$(OBJCOPY_x86_32)" STRIP="$(STRIP_x86_32)" \
CONFIG_FILO_MASTER=$(CONFIG_FILO_MASTER) \
payloads: FILO: Hook up autoboot options FILO allows to configure a line to autoboot. Hook this up into coreboot’s build system. TEST=Configure coreboot for QEMU i440fx with FILO as payload and configure: CONFIG_FILO_MASTER=y CONFIG_FILO_USE_AUTOBOOT=y CONFIG_FILO_AUTOBOOT_FILE="hda1:/vmlinuz root=/dev/sda1 console=tty0 console=ttyS0,115200 initrd=hda1:/initrd.img" CONFIG_FILO_AUTOBOOT_DELAY=5 Boot Debian image with: qemu-system-x86_64 -bios /dev/shm/coreboot/build/coreboot.rom -L /dev/shm -enable-kvm -smp cpus=2 -m 1G -hda /dev/shm/debian-32.img -serial stdio -net nic -net user,hostfwd=tcp::22222-:22 Change-Id: Id167e9a144bf466da87469108002672b299b702a Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56213 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-07-08 19:16:17 +02:00
CONFIG_FILO_STABLE=$(CONFIG_FILO_STABLE) \
CONFIG_FILO_USE_AUTOBOOT=$(CONFIG_FILO_USE_AUTOBOOT) \
CONFIG_FILO_AUTOBOOT_FILE=$(CONFIG_FILO_AUTOBOOT_FILE) \
CONFIG_FILO_AUTOBOOT_DELAY=$(CONFIG_FILO_AUTOBOOT_DELAY)
payloads: Reorganize Makefile.incs for external payloads This is not going as far as I would like it to go, but some of the external payloads have to be fixed up first. Long term, I would like to directly add payloads/external/* to subdirs-y and remove one layer of indirection from the build process. For now, moving the payload Makefile targets into payloads/ is already a small improvement. Change-Id: Ie4eb492eb804e0aaaf1a4d90af2f876f27a32a75 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10829 Reviewed-by: Martin Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-01 02:09:17 +02:00
build system: add dependencies for GRUB2 and FILO Make sure the build system knows how to start building the various integrated payloads we support. Change-Id: I2128d09c78795e0a41b055975e9f7052e3d951ee Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: https://review.coreboot.org/12641 Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-04 16:52:18 +01:00
payloads/external/FILO/filo/build/filo.elf: filo
payloads: fix dependencies for seabios and filo config and revision data need to be around before they're added to CBFS. Change-Id: I195156773effd5137c3fda3639c002fbec6e7158 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/12971 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-14 20:41:58 +01:00
payloads/external/FILO/filo/.config: filo
payloads/external/FILO/filo/build/version.h: filo
payloads: Reorganize Makefile.incs for external payloads This is not going as far as I would like it to go, but some of the external payloads have to be fixed up first. Long term, I would like to directly add payloads/external/* to subdirs-y and remove one layer of indirection from the build process. For now, moving the payload Makefile targets into payloads/ is already a small improvement. Change-Id: Ie4eb492eb804e0aaaf1a4d90af2f876f27a32a75 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10829 Reviewed-by: Martin Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-01 02:09:17 +02:00
payloads/external/Makefile.inc: Clean up makefile - Add comments dividing the payload sections. - Move separate TINT and Memtest sections that were intermingled. Change-Id: If0bbd6e182359c5186a8b958dd2c9ab9f0e0a3f3 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17046 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-10-17 18:11:10 +02:00
# Grub
payloads/external: Add more option related to SeaBIOS and GRUB2 Also known as "SeaGRUB", running GRUB2 atop SeaBIOS proves to be a useful configuration, since SeaBIOS has improved its hardware compatibility. For example, some USB drive can work under SeaBIOS but do not work under native GRUB2, and GRUB2 can use BIOS call (provided by SeaBIOS) as a fallback method to access hardware if it is present. But more option is added addition to "SeaGRUB": now GRUB2 and SeaBIOS can be built as secondary payloads, and "SeaGRUB" is now implemented as "Primary SeaBIOS + Secondary GRUB2 (selected) + config files". Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Change-Id: Ie681fa231abfe4a8f1e4510b3c17957550a9d2f8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60640 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-01-01 04:56:00 +01:00
GRUB_TARGET_PATH=payloads/external/GRUB2/grub2/build/default_payload.elf
cbfs-files-$(CONFIG_GRUB2_SECONDARY_PAYLOAD) += img/grub2
img/grub2-file := $(GRUB_TARGET_PATH)
img/grub2-type := payload
img/grub2-compression := $(CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG)
payloads/external/GRUB2: Only rebuild on config changes Change-Id: I376eea9a3e02b03010fc5c5a05199ea7b2813220 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/20991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-14 01:58:28 +02:00
grub2: $(obj)/config.h
payloads/external: Rename Makefile.inc to Makefile These makefiles are not included by anything, so they shouldn't be named Makefile.inc. Also, having them all be named 'Makefile' makes some other consolidation work I'm doing much easier. Change-Id: I1234539ba6a0a6f47d2eb0c21de3da3607c6b8de Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14130 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-16 17:39:30 +01:00
$(MAKE) -C payloads/external/GRUB2 \
payloads: Reorganize Makefile.incs for external payloads This is not going as far as I would like it to go, but some of the external payloads have to be fixed up first. Long term, I would like to directly add payloads/external/* to subdirs-y and remove one layer of indirection from the build process. For now, moving the payload Makefile targets into payloads/ is already a small improvement. Change-Id: Ie4eb492eb804e0aaaf1a4d90af2f876f27a32a75 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10829 Reviewed-by: Martin Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-01 02:09:17 +02:00
HOSTCC="$(HOSTCC)" \
payloads/external/GRUB2: Sanitize Makefile We were explicitly passing CC and TARGET_CC to configure but overwrote that decision later by passing CC (with the value of TARGET_CC) directly to a recursive make call. The latter overwrite was introduced because `unexport` alone doesn't work on variables that were specified on a make command line (they are added to MAKEOVERRIDES and passed to further re- cursive make calls). Instead of unexporting random variables, unexport those that were actu- ally passed from payloads/external/Makefile.inc and clear MAKEOVERRIDES. Do not pass OBJDUMP as that is nowhere to be found in the GRUB sources. And, last but not least, add --disable-werror because building GRUB is very susceptible to changes in the flex version. Change-Id: Iaff2c72e89a5a540fe365eacb84811d5cff9d4d4 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/20990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-14 01:38:24 +02:00
CC="$(CC_x86_32)" LD="$(LD_x86_32)" \
payloads: Reorganize Makefile.incs for external payloads This is not going as far as I would like it to go, but some of the external payloads have to be fixed up first. Long term, I would like to directly add payloads/external/* to subdirs-y and remove one layer of indirection from the build process. For now, moving the payload Makefile targets into payloads/ is already a small improvement. Change-Id: Ie4eb492eb804e0aaaf1a4d90af2f876f27a32a75 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10829 Reviewed-by: Martin Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-01 02:09:17 +02:00
OBJCOPY="$(OBJCOPY_x86_32)" STRIP="$(STRIP_x86_32)" \
payloads/external/GRUB2: Only rebuild on config changes Change-Id: I376eea9a3e02b03010fc5c5a05199ea7b2813220 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/20991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-14 01:58:28 +02:00
CONFIG_DEP="$(abspath $(obj)/config.h)" \
payloads/external: Add a stable version of GRUB2 This should make reproducible builds of coreboot with GRUB2 easier. Change-Id: If855042945ab34f34c554e7490c811ec7b256980 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/22527 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-11-20 01:56:41 +01:00
CONFIG_GRUB2_STABLE=$(CONFIG_GRUB2_STABLE) \
payloads/external/GRUB2: Pass CONFIG_GRUB2_EXTRA_MODULES Set CONFIG_GRUB2_EXTRA_MODULES from the Kconfig when building GRUB2. This causes the specified modules to actually enter the built payload. Change-Id: I345026af705ba8af77c6c12aba8e1bd4135e519c Signed-off-by: Benjamin Barenblat <bbaren@google.com> Reviewed-on: https://review.coreboot.org/15203 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2016-06-15 21:08:06 +02:00
CONFIG_GRUB2_MASTER=$(CONFIG_GRUB2_MASTER) \
payloads/external/GRUB2: Add "git revision" to the GRUB2 version menu This change is based on the following commit: 3aa91dc payloads/seabios: Add "git revision" to the SeaBIOS version menu Change-Id: I9987e3673e70b5cb20173d1ddff6060f42a5374a Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: https://review.coreboot.org/18352 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-14 14:41:36 +02:00
CONFIG_GRUB2_REVISION=$(CONFIG_GRUB2_REVISION) \
CONFIG_GRUB2_REVISION_ID=$(CONFIG_GRUB2_REVISION_ID) \
payloads/external/GRUB2: Pass CONFIG_GRUB2_EXTRA_MODULES Set CONFIG_GRUB2_EXTRA_MODULES from the Kconfig when building GRUB2. This causes the specified modules to actually enter the built payload. Change-Id: I345026af705ba8af77c6c12aba8e1bd4135e519c Signed-off-by: Benjamin Barenblat <bbaren@google.com> Reviewed-on: https://review.coreboot.org/15203 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2016-06-15 21:08:06 +02:00
CONFIG_GRUB2_EXTRA_MODULES=$(CONFIG_GRUB2_EXTRA_MODULES)
build system: add dependencies for GRUB2 and FILO Make sure the build system knows how to start building the various integrated payloads we support. Change-Id: I2128d09c78795e0a41b055975e9f7052e3d951ee Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: https://review.coreboot.org/12641 Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-04 16:52:18 +01:00
payloads/external: Add more option related to SeaBIOS and GRUB2 Also known as "SeaGRUB", running GRUB2 atop SeaBIOS proves to be a useful configuration, since SeaBIOS has improved its hardware compatibility. For example, some USB drive can work under SeaBIOS but do not work under native GRUB2, and GRUB2 can use BIOS call (provided by SeaBIOS) as a fallback method to access hardware if it is present. But more option is added addition to "SeaGRUB": now GRUB2 and SeaBIOS can be built as secondary payloads, and "SeaGRUB" is now implemented as "Primary SeaBIOS + Secondary GRUB2 (selected) + config files". Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Change-Id: Ie681fa231abfe4a8f1e4510b3c17957550a9d2f8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60640 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-01-01 04:56:00 +01:00
$(GRUB_TARGET_PATH): grub2
Payloads: Add U-Boot as a coreboot-payload - Add Kconfig and Makefile options to use U-Boot as a payload. - Add Kconfig option for extra cbfstool command line arguments. - Add Kconfig & Makefile option to load the payload as a flat binary. - Add u-boot directory to .gitignore. This is currently working for X-86 only. Graphics worked in U-Boot correctly by initializing the VBIOS and setting up a console mode. Tested in QEMU and on Minnowboard Max. Got into U-Boot, have not booted an OS yet. Change-Id: Ia122a4ad7cd7d96107c1552b0376c8106ca8fb92 Signed-off-by: Martin Roth <martinroth@google.com> Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/12714 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-11 20:24:33 +01:00
payloads/external/Makefile.inc: Clean up makefile - Add comments dividing the payload sections. - Move separate TINT and Memtest sections that were intermingled. Change-Id: If0bbd6e182359c5186a8b958dd2c9ab9f0e0a3f3 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17046 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-10-17 18:11:10 +02:00
# U-Boot
payloads/U-Boot: Fix various build errors 1. Fix the inconsistence of the target path of U-Boot payload between Kconfig and Makefile.inc. 2. Perform full clone (to the destined commit) in order to get tags. 3. Move stable commit id of U-Boot payload from Makefile to Kconfig, and make prompt consistent with it. Change-Id: Ic0f11c16274456a452a0422e19fab0c61d8b5d5b Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60028 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-12-11 10:37:57 +01:00
payloads/external/U-Boot/build/u-boot.bin u-boot: $(DOTCONFIG)
payloads/external: Rename Makefile.inc to Makefile These makefiles are not included by anything, so they shouldn't be named Makefile.inc. Also, having them all be named 'Makefile' makes some other consolidation work I'm doing much easier. Change-Id: I1234539ba6a0a6f47d2eb0c21de3da3607c6b8de Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14130 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-16 17:39:30 +01:00
$(MAKE) -C payloads/external/U-Boot \
payloads/U-Boot: Fix various build errors 1. Fix the inconsistence of the target path of U-Boot payload between Kconfig and Makefile.inc. 2. Perform full clone (to the destined commit) in order to get tags. 3. Move stable commit id of U-Boot payload from Makefile to Kconfig, and make prompt consistent with it. Change-Id: Ic0f11c16274456a452a0422e19fab0c61d8b5d5b Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60028 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-12-11 10:37:57 +01:00
STABLE_COMMIT_ID=$(CONFIG_UBOOT_STABLE_COMMIT_ID) \
Payloads: Add U-Boot as a coreboot-payload - Add Kconfig and Makefile options to use U-Boot as a payload. - Add Kconfig option for extra cbfstool command line arguments. - Add Kconfig & Makefile option to load the payload as a flat binary. - Add u-boot directory to .gitignore. This is currently working for X-86 only. Graphics worked in U-Boot correctly by initializing the VBIOS and setting up a console mode. Tested in QEMU and on Minnowboard Max. Got into U-Boot, have not booted an OS yet. Change-Id: Ia122a4ad7cd7d96107c1552b0376c8106ca8fb92 Signed-off-by: Martin Roth <martinroth@google.com> Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/12714 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-11 20:24:33 +01:00
CONFIG_UBOOT_MASTER=$(CONFIG_UBOOT_MASTER) \
CONFIG_UBOOT_STABLE=$(CONFIG_UBOOT_STABLE)
BuildSystem: Add Memtest86+ as a secondary payload This allows memtest86+ to be added to CBFS as a 'secondary' payload on x86 systems, to be loaded by the main payload if desired. Selecting this option, which defaults to no, builds the memtest86+ payload and adds it to CBFS as `img/memtest` which can then be loaded by for example SeaBIOS or GRUB. Change-Id: Iecf876aaf588ba1df7abdf6668cb26f089bf5f42 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13858 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Ben Gardner <gardner.ben@gmail.com>
2016-02-29 00:56:27 +01:00
payloads/external/Makefile.inc: Clean up makefile - Add comments dividing the payload sections. - Move separate TINT and Memtest sections that were intermingled. Change-Id: If0bbd6e182359c5186a8b958dd2c9ab9f0e0a3f3 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17046 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-10-17 18:11:10 +02:00
# TINT
tint: Fix tint and add Kconfig option Fix the compiler errors with tint, improves the Makefile, adds Kconfig integration and secondary payload option. Change-Id: Ia99e30f566d5ccf0d083e52bf174970535daefc5 Signed-off-by: Antonello Dettori <dettori.an@gmail.com> Reviewed-on: https://review.coreboot.org/14989 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-27 23:44:47 +02:00
payloads/external/tint/tint/tint.elf tint:
$(MAKE) -C payloads/external/tint
payloads/external/Makefile.inc: Clean up makefile - Add comments dividing the payload sections. - Move separate TINT and Memtest sections that were intermingled. Change-Id: If0bbd6e182359c5186a8b958dd2c9ab9f0e0a3f3 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17046 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-10-17 18:11:10 +02:00
cbfs-files-$(CONFIG_TINT_SECONDARY_PAYLOAD) += img/tint
img/tint-file := payloads/external/tint/tint/tint.elf
Revert "cbfs/payload type: Fix build warning and whitespace in name" This reverts commit 717ba748366cda19b7532897a5b8d59fc2cd25d9. This breaks seabios and a few other payloads. This is not ready for use. Change-Id: I48ebe2e2628c11e935357b900d01953882cd20dd Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/26310 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-16 03:05:07 +02:00
img/tint-type := payload
payloads: Add an option to compress secondary payloads Both GRUB and SeaBIOS can chainload lzma compressed payloads. Therefore it is beneficial to compress secondary payloads like Memtest86+, coreinfo, nvramcui,... for both size reasons and often also speed reasons since the limiting factor is generally the IO of the boot device. Tested with SeaBIOS and memtest86+ master on Thinkpad X220. Change-Id: Iddfd6fcf4112d255cc7b2b49b99bf5ea4d6f8db4 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23639 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-07 13:01:43 +01:00
img/tint-compression := $(CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG)
payloads/external/Makefile.inc: Clean up makefile - Add comments dividing the payload sections. - Move separate TINT and Memtest sections that were intermingled. Change-Id: If0bbd6e182359c5186a8b958dd2c9ab9f0e0a3f3 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17046 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-10-17 18:11:10 +02:00
# Memtest86+
BuildSystem: Add Memtest86+ as a secondary payload This allows memtest86+ to be added to CBFS as a 'secondary' payload on x86 systems, to be loaded by the main payload if desired. Selecting this option, which defaults to no, builds the memtest86+ payload and adds it to CBFS as `img/memtest` which can then be loaded by for example SeaBIOS or GRUB. Change-Id: Iecf876aaf588ba1df7abdf6668cb26f089bf5f42 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13858 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Ben Gardner <gardner.ben@gmail.com>
2016-02-29 00:56:27 +01:00
cbfs-files-$(CONFIG_MEMTEST_SECONDARY_PAYLOAD) += img/memtest
img/memtest-file := payloads/external/Memtest86Plus/memtest86plus/memtest
Revert "cbfs/payload type: Fix build warning and whitespace in name" This reverts commit 717ba748366cda19b7532897a5b8d59fc2cd25d9. This breaks seabios and a few other payloads. This is not ready for use. Change-Id: I48ebe2e2628c11e935357b900d01953882cd20dd Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/26310 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-16 03:05:07 +02:00
img/memtest-type := payload
payloads: Add an option to compress secondary payloads Both GRUB and SeaBIOS can chainload lzma compressed payloads. Therefore it is beneficial to compress secondary payloads like Memtest86+, coreinfo, nvramcui,... for both size reasons and often also speed reasons since the limiting factor is generally the IO of the boot device. Tested with SeaBIOS and memtest86+ master on Thinkpad X220. Change-Id: Iddfd6fcf4112d255cc7b2b49b99bf5ea4d6f8db4 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23639 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-07 13:01:43 +01:00
img/memtest-compression := $(CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG)
BuildSystem: Add Memtest86+ as a secondary payload This allows memtest86+ to be added to CBFS as a 'secondary' payload on x86 systems, to be loaded by the main payload if desired. Selecting this option, which defaults to no, builds the memtest86+ payload and adds it to CBFS as `img/memtest` which can then be loaded by for example SeaBIOS or GRUB. Change-Id: Iecf876aaf588ba1df7abdf6668cb26f089bf5f42 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13858 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Ben Gardner <gardner.ben@gmail.com>
2016-02-29 00:56:27 +01:00
ifeq ($(CONFIG_CONSOLE_SERIAL)$(CONFIG_DRIVERS_UART_8250IO),yy)
MEMTEST_SERIAL_OPTIONS=SERIAL_CONSOLE_DEFAULT=1 \
SERIAL_TTY=$(CONFIG_UART_FOR_CONSOLE) \
SERIAL_BAUD_RATE=$(CONFIG_TTYS0_BAUD)
endif
Makefile: Include $(top) in DOTCONFIG definition to allow override Including $(top) in the DOTCONFIG definition allows getting rid of the $(top) prefix in payloads, which in turns allows providing a full path for DOTCONFIG via the command line. Change-Id: I7546a12cf4a2a146e32fef81121f45f83ba67ac8 Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: https://review.coreboot.org/15826 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-07-24 12:25:07 +02:00
payloads/external/Memtest86Plus/memtest86plus/memtest: $(DOTCONFIG)
payloads/external: Rename Makefile.inc to Makefile These makefiles are not included by anything, so they shouldn't be named Makefile.inc. Also, having them all be named 'Makefile' makes some other consolidation work I'm doing much easier. Change-Id: I1234539ba6a0a6f47d2eb0c21de3da3607c6b8de Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14130 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-16 17:39:30 +01:00
$(MAKE) -C payloads/external/Memtest86Plus all \
BuildSystem: Add Memtest86+ as a secondary payload This allows memtest86+ to be added to CBFS as a 'secondary' payload on x86 systems, to be loaded by the main payload if desired. Selecting this option, which defaults to no, builds the memtest86+ payload and adds it to CBFS as `img/memtest` which can then be loaded by for example SeaBIOS or GRUB. Change-Id: Iecf876aaf588ba1df7abdf6668cb26f089bf5f42 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13858 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Ben Gardner <gardner.ben@gmail.com>
2016-02-29 00:56:27 +01:00
CC="$(CC_x86_32)" \
LD="$(LD_x86_32)" \
OBJCOPY="$(OBJCOPY_x86_32)" \
AS="$(AS_x86_32)" \
payloads/external/Memtest86Plus: allow for selecting a specific revision Because the Kconfig configuration files for primary payloads are already sourced via a wildcard pattern this change requires to use another file name pattern. Change-Id: I83b89f5e14618e8a487ebb044fcdd3c175662591 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/28217 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-19 17:48:53 +02:00
CONFIG_MEMTEST_REVISION=$(CONFIG_MEMTEST_REVISION) \
CONFIG_MEMTEST_REVISION_ID=$(CONFIG_MEMTEST_REVISION_ID) \
payloads: Add a stable version of Memtest86+ for reproducibility Memtest86+ was pulling origin/master which will change over time. This adds a commit-id as a stable version to allow it to be reproducible. The other secondary payloads, coreinfo and nvramcui, do not need this because they are part of the coreboot repo and not fetched from an external source. Change-Id: I20c516010f76cf03342bd8883d0ee7ac5f8bc7e4 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14520 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-04-26 17:51:41 +02:00
CONFIG_MEMTEST_MASTER=$(CONFIG_MEMTEST_MASTER) \
CONFIG_MEMTEST_STABLE=$(CONFIG_MEMTEST_STABLE) \
BuildSystem: Add Memtest86+ as a secondary payload This allows memtest86+ to be added to CBFS as a 'secondary' payload on x86 systems, to be loaded by the main payload if desired. Selecting this option, which defaults to no, builds the memtest86+ payload and adds it to CBFS as `img/memtest` which can then be loaded by for example SeaBIOS or GRUB. Change-Id: Iecf876aaf588ba1df7abdf6668cb26f089bf5f42 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13858 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Ben Gardner <gardner.ben@gmail.com>
2016-02-29 00:56:27 +01:00
$(MEMTEST_SERIAL_OPTIONS) \
MFLAGS= MAKEFLAGS=
payloads: add iPXE 'payload' build We already have the ability to add a pxe rom to cbfs, but it needs to be configured and built separately. This moves the existing Kconfig options for PXE from device/Kconfig and the top level Makefile.inc to payloads, and adds the option to download and build iPXE as part of the coreboot build process. This configures the serial output of iPXE to match coreboot's serial port configuration by editing the .h files. iPXE doesn't give any real build-time method of setting these configuration options. Change-Id: I3d77b2c6845b7f5f644440f6910c3b4533a0d415 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14085 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-03-13 20:00:43 +01:00
payloads/external/Makefile.inc: Clean up makefile - Add comments dividing the payload sections. - Move separate TINT and Memtest sections that were intermingled. Change-Id: If0bbd6e182359c5186a8b958dd2c9ab9f0e0a3f3 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17046 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-10-17 18:11:10 +02:00
# iPXE
payloads: add iPXE 'payload' build We already have the ability to add a pxe rom to cbfs, but it needs to be configured and built separately. This moves the existing Kconfig options for PXE from device/Kconfig and the top level Makefile.inc to payloads, and adds the option to download and build iPXE as part of the coreboot build process. This configures the serial output of iPXE to match coreboot's serial port configuration by editing the .h files. iPXE doesn't give any real build-time method of setting these configuration options. Change-Id: I3d77b2c6845b7f5f644440f6910c3b4533a0d415 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14085 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-03-13 20:00:43 +01:00
PXE_ROM_PCI_ID:=$(subst $(comma),,$(CONFIG_PXE_ROM_ID))
ifeq ($(CONFIG_PXE_ROM),y)
PXE_ROM_FILE:=$(CONFIG_PXE_ROM_FILE)
endif
ifeq ($(CONFIG_BUILD_IPXE),y)
PXE_ROM_FILE:=payloads/external/iPXE/ipxe/ipxe.rom
endif
payloads/external/iPXE: Add more Kconfig options Add two new options: * Disable the prompt "Press Ctrl+B for the iPXE command line..." Add a boolean that disables the initial 2 second timeout. * Include a script that is executed instead of showing a shell. Allows to add a script that will be included into the iPXE ROM. Tested on Lenovo T500 and PC Engines apu2. Change-Id: Ie1083d8571d9d1f1c7c71659fb6ff0de2eecad0e Signed-off-by: Patrick Rudolph <siro@das-labor.org> Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/20782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-07-25 19:36:25 +02:00
ifeq ($(CONFIG_PXE_ADD_SCRIPT),y)
PXE_CONFIG_SCRIPT:=$(abspath $(patsubst "%",%,$(CONFIG_PXE_SCRIPT)))
endif
payloads: add iPXE 'payload' build We already have the ability to add a pxe rom to cbfs, but it needs to be configured and built separately. This moves the existing Kconfig options for PXE from device/Kconfig and the top level Makefile.inc to payloads, and adds the option to download and build iPXE as part of the coreboot build process. This configures the serial output of iPXE to match coreboot's serial port configuration by editing the .h files. iPXE doesn't give any real build-time method of setting these configuration options. Change-Id: I3d77b2c6845b7f5f644440f6910c3b4533a0d415 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14085 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-03-13 20:00:43 +01:00
ifeq ($(CONFIG_CONSOLE_SERIAL)$(CONFIG_DRIVERS_UART_8250IO),yy)
IPXE_UART=COM$(call int-add,$(CONFIG_UART_FOR_CONSOLE) 1)
endif
payloads/iPXE: add iPXE serial enable option Since SeaBIOS 1.11.0 implements serial console and etc/sercon-port runtime config file is present in CBFS, SeaBIOS additionally redirects iPXE output to configured IO port. For boards which use the same UART for SeaBIOS and iPXE console it causes doubled output. The option is enabled by default and passes UART configuration to iPXE Makefile as before. When unselected, only SeaBIOS handles printing output from iPXE. Change-Id: Ia3c74cfbee4f816782161fcff286a14f46be78c5 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Reviewed-on: https://review.coreboot.org/27302 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-26 13:12:49 +02:00
ifeq ($(CONFIG_PXE_SERIAL_CONSOLE),y)
IPXE_SERIAL_CONSOLE = $(CONFIG_CONSOLE_SERIAL)$(CONFIG_DRIVERS_UART_8250IO)
else
IPXE_SERIAL_CONSOLE = n
endif
payloads: add iPXE 'payload' build We already have the ability to add a pxe rom to cbfs, but it needs to be configured and built separately. This moves the existing Kconfig options for PXE from device/Kconfig and the top level Makefile.inc to payloads, and adds the option to download and build iPXE as part of the coreboot build process. This configures the serial output of iPXE to match coreboot's serial port configuration by editing the .h files. iPXE doesn't give any real build-time method of setting these configuration options. Change-Id: I3d77b2c6845b7f5f644440f6910c3b4533a0d415 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14085 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-03-13 20:00:43 +01:00
cbfs-files-$(CONFIG_PXE_ROM)$(CONFIG_BUILD_IPXE) += pci$(CONFIG_PXE_ROM_ID).rom
pci$(CONFIG_PXE_ROM_ID).rom-file := $(PXE_ROM_FILE)
pci$(CONFIG_PXE_ROM_ID).rom-type := raw
payloads/external/iPXE: Add more Kconfig options Add two new options: * Disable the prompt "Press Ctrl+B for the iPXE command line..." Add a boolean that disables the initial 2 second timeout. * Include a script that is executed instead of showing a shell. Allows to add a script that will be included into the iPXE ROM. Tested on Lenovo T500 and PC Engines apu2. Change-Id: Ie1083d8571d9d1f1c7c71659fb6ff0de2eecad0e Signed-off-by: Patrick Rudolph <siro@das-labor.org> Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/20782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-07-25 19:36:25 +02:00
payloads/external/iPXE/ipxe/ipxe.rom ipxe: $(DOTCONFIG) $(PXE_CONFIG_SCRIPT)
payloads: add iPXE 'payload' build We already have the ability to add a pxe rom to cbfs, but it needs to be configured and built separately. This moves the existing Kconfig options for PXE from device/Kconfig and the top level Makefile.inc to payloads, and adds the option to download and build iPXE as part of the coreboot build process. This configures the serial output of iPXE to match coreboot's serial port configuration by editing the .h files. iPXE doesn't give any real build-time method of setting these configuration options. Change-Id: I3d77b2c6845b7f5f644440f6910c3b4533a0d415 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14085 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-03-13 20:00:43 +01:00
$(MAKE) -C payloads/external/iPXE all \
CROSS_COMPILE="$(CROSS_COMPILE_$(ARCH-ramstage-y))" \
PXE_ROM_PCI_ID=$(PXE_ROM_PCI_ID) \
CONFIG_IPXE_MASTER=$(CONFIG_IPXE_MASTER) \
CONFIG_IPXE_STABLE=$(CONFIG_IPXE_STABLE) \
payloads/iPXE: add iPXE serial enable option Since SeaBIOS 1.11.0 implements serial console and etc/sercon-port runtime config file is present in CBFS, SeaBIOS additionally redirects iPXE output to configured IO port. For boards which use the same UART for SeaBIOS and iPXE console it causes doubled output. The option is enabled by default and passes UART configuration to iPXE Makefile as before. When unselected, only SeaBIOS handles printing output from iPXE. Change-Id: Ia3c74cfbee4f816782161fcff286a14f46be78c5 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Reviewed-on: https://review.coreboot.org/27302 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-26 13:12:49 +02:00
CONSOLE_SERIAL=$(IPXE_SERIAL_CONSOLE) \
payloads: add iPXE 'payload' build We already have the ability to add a pxe rom to cbfs, but it needs to be configured and built separately. This moves the existing Kconfig options for PXE from device/Kconfig and the top level Makefile.inc to payloads, and adds the option to download and build iPXE as part of the coreboot build process. This configures the serial output of iPXE to match coreboot's serial port configuration by editing the .h files. iPXE doesn't give any real build-time method of setting these configuration options. Change-Id: I3d77b2c6845b7f5f644440f6910c3b4533a0d415 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14085 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-03-13 20:00:43 +01:00
IPXE_UART=$(IPXE_UART) \
CONFIG_TTYS0_BAUD=$(CONFIG_TTYS0_BAUD) \
payloads/external/iPXE: Add more Kconfig options Add two new options: * Disable the prompt "Press Ctrl+B for the iPXE command line..." Add a boolean that disables the initial 2 second timeout. * Include a script that is executed instead of showing a shell. Allows to add a script that will be included into the iPXE ROM. Tested on Lenovo T500 and PC Engines apu2. Change-Id: Ie1083d8571d9d1f1c7c71659fb6ff0de2eecad0e Signed-off-by: Patrick Rudolph <siro@das-labor.org> Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/20782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-07-25 19:36:25 +02:00
CONFIG_SCRIPT=$(PXE_CONFIG_SCRIPT) \
CONFIG_HAS_SCRIPT=$(CONFIG_PXE_ADD_SCRIPT) \
payloads/external: s/PROMT/PROMPT/g Change-Id: Id305d9edecac9e9cd305301e9dc5af6678ef7528 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41831 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-05-28 23:40:24 +02:00
CONFIG_PXE_NO_PROMPT=$(CONFIG_PXE_NO_PROMPT) \
payloads/ipxe: Enable HTTPS support Change-Id: Ia25d4ce9260fa8c00fdea0e19f5e927559371af0 Signed-off-by: Felix Singer <migy@darmstadt.ccc.de> Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31086 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2019-01-25 03:44:20 +01:00
CONFIG_PXE_HAS_HTTPS=$(CONFIG_PXE_HAS_HTTPS) \
payloads: add iPXE 'payload' build We already have the ability to add a pxe rom to cbfs, but it needs to be configured and built separately. This moves the existing Kconfig options for PXE from device/Kconfig and the top level Makefile.inc to payloads, and adds the option to download and build iPXE as part of the coreboot build process. This configures the serial output of iPXE to match coreboot's serial port configuration by editing the .h files. iPXE doesn't give any real build-time method of setting these configuration options. Change-Id: I3d77b2c6845b7f5f644440f6910c3b4533a0d415 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14085 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-03-13 20:00:43 +01:00
MFLAGS= MAKEFLAGS=
payloads: Add LinuxBoot payload in u-root mode * Add LinuxBoot support * Add u-root mode * Download kernel and u-root from upstream sources. * Add customization options * Clean kernel only if directory exists Change-Id: I3a25ff6812e046acc688cbbb203cf262ad751659 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/23071 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-19 20:22:32 +02:00
# LinuxBoot
linuxboot:
$(MAKE) -C payloads/external/LinuxBoot \
CPUS=$(CPUS) \
LinuxBoot/targets/linux.mk: refactor kernel compilation Refactor the linux kernel compilation. Change-Id: Iea2e2c8a22a91bdd2e3f83cd3058426acec3eaba Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30053 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-12-05 08:45:26 +01:00
CONFIG_LINUXBOOT_X86_64=$(CONFIG_LINUXBOOT_X86_64) \
CONFIG_LINUXBOOT_X86=$(CONFIG_LINUXBOOT_X86) \
CONFIG_LINUXBOOT_ARM64=$(CONFIG_LINUXBOOT_ARM64) \
LinuxBoot: refactor payload Clean and refactor the structure of the LinuxBoot payload integration, to make it more modular and readable. The kernel and initramfs should handled in separated makefiles. tested with: - qemu-i440fx (x86, x86_64) - cavium CN8100 (arm64) Change-Id: I41d0275a5f7efb920e881f43b0acda29f41ee221 Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com> Reviewed-on: https://review.coreboot.org/c/29581 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-11-11 18:03:26 +01:00
CONFIG_LINUXBOOT_KERNEL=$(CONFIG_PAYLOAD_FILE) \
CONFIG_LINUXBOOT_INITRAMFS=$(CONFIG_LINUX_INITRD) \
LinuxBoot: refactor u-root.mk Clean the u-root initramfs integration and add essential flags as options. Now u-root automatically fetch updates and rebuilts itself to apply changes. Change-Id: Id978ed2ebeff96c5be4f74ae07df9be76e106a1b Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com> Reviewed-on: https://review.coreboot.org/c/29778 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-11-21 17:45:43 +01:00
CONFIG_LINUXBOOT_INITRAMFS_SUFFIX=$(CONFIG_LINUXBOOT_INITRAMFS_SUFFIX) \
LinuxBoot: refactor payload Clean and refactor the structure of the LinuxBoot payload integration, to make it more modular and readable. The kernel and initramfs should handled in separated makefiles. tested with: - qemu-i440fx (x86, x86_64) - cavium CN8100 (arm64) Change-Id: I41d0275a5f7efb920e881f43b0acda29f41ee221 Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com> Reviewed-on: https://review.coreboot.org/c/29581 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-11-11 18:03:26 +01:00
CONFIG_LINUXBOOT_COMPILE_KERNEL=$(CONFIG_LINUXBOOT_COMPILE_KERNEL) \
CONFIG_LINUXBOOT_BUILD_INITRAMFS=$(CONFIG_LINUXBOOT_BUILD_INITRAMFS) \
LinuxBoot/targets/linux.mk: refactor kernel compilation Refactor the linux kernel compilation. Change-Id: Iea2e2c8a22a91bdd2e3f83cd3058426acec3eaba Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30053 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-12-05 08:45:26 +01:00
CONFIG_LINUXBOOT_KERNEL_MAINLINE=$(CONFIG_LINUXBOOT_KERNEL_MAINLINE) \
CONFIG_LINUXBOOT_KERNEL_STABLE=$(CONFIG_LINUXBOOT_KERNEL_STABLE) \
CONFIG_LINUXBOOT_KERNEL_LONGTERM=$(CONFIG_LINUXBOOT_KERNEL_LONGTERM) \
CONFIG_LINUXBOOT_KERNEL_CUSTOM=$(CONFIG_LINUXBOOT_KERNEL_CUSTOM) \
CONFIG_LINUXBOOT_KERNEL_CUSTOM_VERSION=$(CONFIG_LINUXBOOT_KERNEL_CUSTOM_VERSION) \
CONFIG_LINUXBOOT_KERNEL_CUSTOM_CONFIG=$(CONFIG_LINUXBOOT_KERNEL_CUSTOM_CONFIG) \
CONFIG_LINUXBOOT_KERNEL_BZIMAGE=$(CONFIG_LINUXBOOT_KERNEL_BZIMAGE) \
CONFIG_LINUXBOOT_KERNEL_UIMAGE=$(CONFIG_LINUXBOOT_KERNEL_UIMAGE) \
payloads: Add LinuxBoot payload in u-root mode * Add LinuxBoot support * Add u-root mode * Download kernel and u-root from upstream sources. * Add customization options * Clean kernel only if directory exists Change-Id: I3a25ff6812e046acc688cbbb203cf262ad751659 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/23071 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-19 20:22:32 +02:00
CONFIG_LINUXBOOT_KERNEL_CONFIGFILE=$(CONFIG_LINUXBOOT_KERNEL_CONFIGFILE) \
LinuxBoot: refactor u-root.mk Clean the u-root initramfs integration and add essential flags as options. Now u-root automatically fetch updates and rebuilts itself to apply changes. Change-Id: Id978ed2ebeff96c5be4f74ae07df9be76e106a1b Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com> Reviewed-on: https://review.coreboot.org/c/29778 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-11-21 17:45:43 +01:00
CONFIG_LINUXBOOT_INITRAMFS_COMPRESSION_XZ=$(CONFIG_LINUXBOOT_INITRAMFS_COMPRESSION_XZ) \
LinuxBoot: refactor payload Clean and refactor the structure of the LinuxBoot payload integration, to make it more modular and readable. The kernel and initramfs should handled in separated makefiles. tested with: - qemu-i440fx (x86, x86_64) - cavium CN8100 (arm64) Change-Id: I41d0275a5f7efb920e881f43b0acda29f41ee221 Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com> Reviewed-on: https://review.coreboot.org/c/29581 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-11-11 18:03:26 +01:00
CONFIG_LINUXBOOT_UROOT=$(CONFIG_LINUXBOOT_UROOT) \
payloads: Add LinuxBoot payload in u-root mode * Add LinuxBoot support * Add u-root mode * Download kernel and u-root from upstream sources. * Add customization options * Clean kernel only if directory exists Change-Id: I3a25ff6812e046acc688cbbb203cf262ad751659 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/23071 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-19 20:22:32 +02:00
CONFIG_LINUXBOOT_UROOT_VERSION=$(CONFIG_LINUXBOOT_UROOT_VERSION) \
LinuxBoot: refactor u-root.mk Clean the u-root initramfs integration and add essential flags as options. Now u-root automatically fetch updates and rebuilts itself to apply changes. Change-Id: Id978ed2ebeff96c5be4f74ae07df9be76e106a1b Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com> Reviewed-on: https://review.coreboot.org/c/29778 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-11-21 17:45:43 +01:00
CONFIG_LINUXBOOT_UROOT_FORMAT=$(CONFIG_LINUXBOOT_UROOT_FORMAT) \
CONFIG_LINUXBOOT_UROOT_INITCMD=$(CONFIG_LINUXBOOT_UROOT_INITCMD) \
payloads/external/LinuxBoot: Adopt u-root change The u-root toolkit dropped the original uinit bootloader in the master branch and respectively the systemboot-option in templates.go. In consequence the LinuxBoot builds will boot into the u-root shell and waiting for input. This commit enables the reuse of the -uinitcmd flag to specify a command, which runs after the u-root init-process. Systemboot as a bootloader wrapper will mimic a BIOS/UEFI boot device selection. Other preselections, i.e. stboot and boot2 are implemented as well. Custom strings or programs can be set as well, but they cannot contain program flags. E.g. 'fbnetboot -class linuxboot' will not work, because they aren't symlinkable. This commit and its respective LinuxBoot builds with systemboot, none and one custom option have been tested successfully on a UP squared single board computer with the intended behavior. Change-Id: I4ac3409040ea77a1836f90f43fba07d2cd05a952 Signed-off-by: Patrik Tesarik <mail@patrik-tesarik.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40316 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-04-11 16:17:35 +02:00
CONFIG_LINUXBOOT_UROOT_UINITCMD=$(CONFIG_LINUXBOOT_UROOT_UINITCMD)\
LinuxBoot: refactor u-root.mk Clean the u-root initramfs integration and add essential flags as options. Now u-root automatically fetch updates and rebuilts itself to apply changes. Change-Id: Id978ed2ebeff96c5be4f74ae07df9be76e106a1b Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com> Reviewed-on: https://review.coreboot.org/c/29778 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-11-21 17:45:43 +01:00
CONFIG_LINUXBOOT_UROOT_SHELL=$(CONFIG_LINUXBOOT_UROOT_SHELL) \
linuxboot: remove curley brace expansion from u-root commands Curley brace expansion is a bash-ism, so we can't use it for the u-root command list. This unfortunately also breaks the current Kconfig option since the list needs to be separated by space instead of commas. Change-Id: I429a52c1673e29b7180ee6f53deaa7a551a1a9b3 Signed-off-by: David Hendricks <dhendricks@fb.com> Reviewed-on: https://review.coreboot.org/27967 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-09 04:16:55 +02:00
CONFIG_LINUXBOOT_UROOT_COMMANDS=$(CONFIG_LINUXBOOT_UROOT_COMMANDS) \
payloads/LinuxBoot: Add ARM64 support Add support for ARCH=ARM64 and introduce CROSS_COMPILE for all architectures. * Always compress kernel Image using xz * Create FIT uImage containing the kernel, initramfs and DTB * Add ARM64 defconfig for all SoCs Change-Id: I9a0cc248283432fb2384956ca55e687d4127398c Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25152 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-03-13 11:22:26 +01:00
CONFIG_LINUXBOOT_UROOT_FILES=$(CONFIG_LINUXBOOT_UROOT_FILES) \
LinuxBoot: refactor payload Clean and refactor the structure of the LinuxBoot payload integration, to make it more modular and readable. The kernel and initramfs should handled in separated makefiles. tested with: - qemu-i440fx (x86, x86_64) - cavium CN8100 (arm64) Change-Id: I41d0275a5f7efb920e881f43b0acda29f41ee221 Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com> Reviewed-on: https://review.coreboot.org/c/29581 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-11-11 18:03:26 +01:00
CONFIG_LINUXBOOT_DTB_FILE=$(CONFIG_LINUXBOOT_DTB_FILE)
payloads/LinuxBoot: Add ARM64 support Add support for ARCH=ARM64 and introduce CROSS_COMPILE for all architectures. * Always compress kernel Image using xz * Create FIT uImage containing the kernel, initramfs and DTB * Add ARM64 defconfig for all SoCs Change-Id: I9a0cc248283432fb2384956ca55e687d4127398c Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25152 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-03-13 11:22:26 +01:00
LinuxBoot: refactor payload Clean and refactor the structure of the LinuxBoot payload integration, to make it more modular and readable. The kernel and initramfs should handled in separated makefiles. tested with: - qemu-i440fx (x86, x86_64) - cavium CN8100 (arm64) Change-Id: I41d0275a5f7efb920e881f43b0acda29f41ee221 Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com> Reviewed-on: https://review.coreboot.org/c/29581 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-11-11 18:03:26 +01:00
payloads/external/LinuxBoot/linuxboot/bzImage: linuxboot
payloads/external/LinuxBoot/linuxboot/uImage: linuxboot
LinuxBoot: refactor u-root.mk Clean the u-root initramfs integration and add essential flags as options. Now u-root automatically fetch updates and rebuilts itself to apply changes. Change-Id: Id978ed2ebeff96c5be4f74ae07df9be76e106a1b Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com> Reviewed-on: https://review.coreboot.org/c/29778 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-11-21 17:45:43 +01:00
payloads/external/LinuxBoot/linuxboot/initramfs_u-root.cpio: linuxboot
payloads: Add LinuxBoot payload in u-root mode * Add LinuxBoot support * Add u-root mode * Download kernel and u-root from upstream sources. * Add customization options * Clean kernel only if directory exists Change-Id: I3a25ff6812e046acc688cbbb203cf262ad751659 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/23071 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-19 20:22:32 +02:00
LinuxBoot: refactor payload Clean and refactor the structure of the LinuxBoot payload integration, to make it more modular and readable. The kernel and initramfs should handled in separated makefiles. tested with: - qemu-i440fx (x86, x86_64) - cavium CN8100 (arm64) Change-Id: I41d0275a5f7efb920e881f43b0acda29f41ee221 Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com> Reviewed-on: https://review.coreboot.org/c/29581 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-11-11 18:03:26 +01:00
# Yabits
payloads/external: Add yabits payload Yabits (Yet another UEFI bootloader) is designed to be a slim and quick alternative to Tianocore. It is still under heavy development. https://web.archive.org/web/https://yabits.github.io/ Change-Id: I132970e952c605c73cfe33dc47f20170ae8aa899 Signed-off-by: Martin Roth <martin@coreboot.org> Reviewed-on: https://review.coreboot.org/28590 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2018-09-13 12:06:39 +02:00
payloads/external/Yabits/uefi/build/uefi.elf yabits:
$(MAKE) -C payloads/external/Yabits all \
payloads/external/Yabits: Pass XGCCPATH Pass `XGCCPATH` instead of individual programs as that is what the Makefile expects. Change-Id: I3267ec5259e9d37b2f3b0b8c126d173fc8b5a3ca Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34556 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-24 20:17:14 +02:00
XGCCPATH="$(XGCCPATH)" \
payloads/external: Add yabits payload Yabits (Yet another UEFI bootloader) is designed to be a slim and quick alternative to Tianocore. It is still under heavy development. https://web.archive.org/web/https://yabits.github.io/ Change-Id: I132970e952c605c73cfe33dc47f20170ae8aa899 Signed-off-by: Martin Roth <martin@coreboot.org> Reviewed-on: https://review.coreboot.org/28590 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2018-09-13 12:06:39 +02:00
CONFIG_YABITS_REVISION=$(CONFIG_YABITS_REVISION) \
CONFIG_YABITS_REVISION_ID=$(CONFIG_YABITS_REVISION_ID) \
CONFIG_YABITS_MASTER=$(CONFIG_YABITS_MASTER) \
CONFIG_YABITS_STABLE=$(CONFIG_YABITS_STABLE) \
MFLAGS= MAKEFLAGS=
payloads/external: add support for BOOTBOOT payload BOOTBOOT is a multi-platform, architecture agnostic boot protocol. The protocol describes how to boot an ELF64 or PE32+ executable inside an initial ram disk image into clean 64 bit mode. This version uses libpayload to do that. Depending on the lib's configuration, initrd can be in ROM as a cbfs file or a Flashmap partition; on disk a GPT partition or a file on a FAT formatted ESP partition. For more information see https://gitlab.com/bztsrc/bootboot Change-Id: I8692cde0730338026a7760a293c1e37f66004bc0 Signed-off-by: Zoltan Baldaszti <bztemail@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45482 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-09-17 19:45:21 +02:00
# BOOTBOOT
payloads/external/BOOTBOOT/bootboot/dist/bootbootcb.elf:
$(MAKE) -C payloads/external/BOOTBOOT all
payloads/external: add skiboot (for QEMU/Power9) Add an option to build skiboot as a payload. This makes QEMU Power9 board simpler to use as skiboot is necessary anyway. Change-Id: I0b49ea7464c97cc2ff0d5030629deed549851372 Signed-off-by: Igor Bagnucki <igor.bagnucki@3mdeb.com> Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com> Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58656 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2021-10-26 23:23:14 +02:00
# skiboot
payloads/external/skiboot/build/skiboot.elf:
$(MAKE) -C payloads/external/skiboot all \
CONFIG_SKIBOOT_GIT_REPO=$(CONFIG_SKIBOOT_GIT_REPO) \
CONFIG_SKIBOOT_REVISION=$(CONFIG_SKIBOOT_REVISION)
payloads/external: Add support for coreDOOM payload coreDOOM is a port of DOOM to libpayload, based on the doomgeneric source port. It renders the game to the coreboot linear framebuffer, and loads WAD files from CBFS. Tested with QEMU i440fx/q35 and a Dell Latitude E6400 using the libgfxinit provided linear framebuffer. Project page: https://github.com/nic3-14159/coreDOOM Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Change-Id: Ice0403b003a4b2717afee585f28303c2f5abea5d Reviewed-on: https://review.coreboot.org/c/coreboot/+/57222 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com>
2021-08-28 17:40:41 +02:00
# COREDOOM
payloads/external/coreDOOM/coredoom/doomgeneric/coredoom.elf coredoom:
$(MAKE) -C payloads/external/coreDOOM
cbfs-files-$(CONFIG_COREDOOM_SECONDARY_PAYLOAD) += img/coreDOOM
img/coreDOOM-file := payloads/external/coreDOOM/coredoom/doomgeneric/coredoom.elf
img/coreDOOM-type := payload
img/coreDOOM-compression := $(CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG)
# WAD file
ifneq ($(strip $(CONFIG_COREDOOM_WAD_FILE)),)
cbfs-files-y += doom.wad
doom.wad-file := $(strip $(CONFIG_COREDOOM_WAD_FILE))
doom.wad-type := raw
doom.wad-compression := $(CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG)
endif