coreboot-kgpe-d16/payloads/libpayload/drivers/usb/ehci.c

365 lines
10 KiB
C
Raw Normal View History

/*
* This file is part of the libpayload project.
*
* Copyright (C) 2010 coresystems GmbH
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <libpayload.h>
#include "ehci.h"
#include "ehci_private.h"
static void dump_td(u32 addr)
{
qtd_t *td = phys_to_virt(addr);
printf("td at phys(%x): active: %x, halted: %x, data_buf_err: %x\n babble: %x, xact_err: %x, missed_mframe: %x\n splitxstate: %x, perr: %x\n\n",
addr, td->active, td->halted, td->data_buf_err, td->babble, td->xact_err, td->missed_mframe, td->splitxstate, td->perr);
printf("- cerr: %x, total_len: %x\n\n", td->cerr, td->total_len);
}
static void ehci_start (hci_t *controller)
{
EHCI_INST(controller)->operation->rs = 1;
}
static void ehci_stop (hci_t *controller)
{
EHCI_INST(controller)->operation->rs = 0;
}
static void ehci_reset (hci_t *controller)
{
}
static void ehci_shutdown (hci_t *controller)
{
}
enum { EHCI_OUT=0, EHCI_IN=1, EHCI_SETUP=2 };
/* returns handled bytes */
int fill_td(qtd_t *td, void* data, int datalen)
{
u32 total_len = 0;
u32 page_minus_1 = 0;
u32 start = virt_to_phys(data);
u32 page = start & ~4095;
u32 offset = start & 4095;
u32 page_len = 4096 - offset;
td->c_page = 0;
td->bufptr0 = page;
td->cur_off = offset;
if (datalen <= page_len) {
total_len = datalen;
} else {
datalen -= page_len;
total_len += page_len;
do {
/* we have a continguous mapping between virtual and physical memory */
page += 4096;
td->bufptrs[page_minus_1] = page;
if (datalen <= 4096) {
total_len += datalen;
break;
}
page_minus_1++;
datalen -= 4096;
total_len += 4096;
} while (page_minus_1<4);
}
td->total_len = total_len;
return total_len;
}
/* free up data structures */
void free_qh_and_tds(ehci_qh_t *qh, qtd_t *cur)
{
qtd_t *next;
while (cur) {
next = (qtd_t*)phys_to_virt(cur->next_qtd & ~31);
free(cur);
cur = next;
}
free(qh);
}
int wait_for_tds(qtd_t *head)
{
int result = 0;
qtd_t *cur = head;
while (1) {
if (0) dump_td(virt_to_phys(cur));
while (cur->active && !cur->halted) udelay(60);
if (cur->halted) {
printf("ERROR with packet\n");
dump_td(virt_to_phys(cur));
printf("-----------------\n");
return 1;
}
if (cur->next_qtd & 1) {
return 0;
}
if (0) dump_td(virt_to_phys(cur));
/* helps debugging the TD chain */
if (0) printf("\nmoving from %x to %x\n", cur, phys_to_virt(cur->next_qtd));
cur = phys_to_virt(cur->next_qtd);
}
return result;
}
static int ehci_bulk (endpoint_t *ep, int size, u8 *data, int finalize)
{
int result = 0;
int endp = ep->endpoint & 0xf;
int pid = (ep->direction==IN)?EHCI_IN:EHCI_OUT;
qtd_t *head = memalign(32, sizeof(qtd_t));
qtd_t *cur = head;
while (1) {
memset(cur, 0, sizeof(qtd_t));
cur->active = 1;
cur->pid = pid;
cur->cerr = 0;
u32 chunk = fill_td(cur, data, size);
size -= chunk;
data += chunk;
cur->alt_terminate = 1;
if (size == 0) {
cur->next_qtd = virt_to_phys(0);
cur->terminate = 1;
break;
} else {
qtd_t *next = memalign(32, sizeof(qtd_t));
cur->next_qtd = virt_to_phys(next);
cur = next;
}
}
/* create QH */
ehci_qh_t *qh = memalign(32, sizeof(ehci_qh_t));
memset(qh, 0, sizeof(ehci_qh_t));
qh->horiz_link_ptr = virt_to_phys(qh);
qh->type = 1; // FIXME: proper symbols for type. this is QH
qh->addr = ep->dev->address;
qh->ep = endp;
qh->eps = ep->dev->speed;
qh->dtc = 0;
qh->reclaim_head = 1;
qh->max_packet_len = ep->maxpacketsize;
qh->nak_cnt_reload = 0;
qh->pipe_multiplier = 3;
qh->td.next_qtd = virt_to_phys(head);
qh->td.dt = ep->toggle;
head->dt = ep->toggle;
/* hook up QH */
EHCI_INST(ep->dev->controller)->operation->asynclistaddr = virt_to_phys(qh);
/* start async schedule */
EHCI_INST(ep->dev->controller)->operation->async_sched_enable = 1;
while (!EHCI_INST(ep->dev->controller)->operation->async_sched_status) ; /* wait */
/* wait for result */
result = wait_for_tds(head);
/* disable async schedule */
EHCI_INST(ep->dev->controller)->operation->async_sched_enable = 0;
while (EHCI_INST(ep->dev->controller)->operation->async_sched_status) ; /* wait */
ep->toggle = cur->dt;
free_qh_and_tds(qh, head);
return result;
}
/* FIXME: Handle control transfers as 3 QHs, so the 2nd stage can be >0x4000 bytes */
static int ehci_control (usbdev_t *dev, direction_t dir, int drlen, void *devreq,
int dalen, u8 *data)
{
int endp = 0; // this is control. always 0 (for now)
int toggle = 0;
int mlen = dev->endpoints[0].maxpacketsize;
int result = 0;
/* create qTDs */
qtd_t *head = memalign(32, sizeof(qtd_t));
qtd_t *cur = head;
memset(cur, 0, sizeof(qtd_t));
cur->active = 1;
cur->dt = toggle;
cur->pid = EHCI_SETUP;
cur->cerr = 3;
if (fill_td(cur, devreq, drlen) != drlen) {
printf("ERROR: couldn't send the entire device request\n");
}
qtd_t *next = memalign(32, sizeof(qtd_t));
cur->next_qtd = virt_to_phys(next);
cur->alt_terminate = 1;
/* FIXME: We're limited to 16-20K (depending on alignment) for payload for now.
* Figure out, how toggle can be set sensibly in this scenario */
if (dalen > 0) {
toggle ^= 1;
cur = next;
memset(cur, 0, sizeof(qtd_t));
cur->active = 1;
cur->dt = toggle;
cur->pid = (dir == OUT)?EHCI_OUT:EHCI_IN;
cur->cerr = 3;
if (fill_td(cur, data, dalen) != dalen) {
printf("ERROR: couldn't send the entire control payload\n");
}
next = memalign(32, sizeof(qtd_t));
cur->next_qtd = virt_to_phys(next);
cur->alt_terminate = 1;
}
toggle = 1;
cur = next;
memset(cur, 0, sizeof(qtd_t));
cur->active = 1;
cur->dt = toggle;
cur->pid = (dir == OUT)?EHCI_IN:EHCI_OUT;
cur->cerr = 0;
fill_td(cur, NULL, 0);
cur->next_qtd = virt_to_phys(0);
cur->terminate = 1;
cur->alt_terminate = 1;
/* create QH */
ehci_qh_t *qh = memalign(32, sizeof(ehci_qh_t));
memset(qh, 0, sizeof(ehci_qh_t));
qh->horiz_link_ptr = virt_to_phys(qh);
qh->type = 1; // FIXME: proper symbols for type. this is QH
qh->addr = dev->address;
qh->ep = endp;
qh->eps = dev->speed;
qh->dtc = 1; /* Take data toggle from TD, as control transfers are special */
qh->reclaim_head = 1;
qh->max_packet_len = mlen;
qh->non_hs_control_ep = 0; // no support for non-HS devices at this time
qh->nak_cnt_reload = 0;
qh->pipe_multiplier = 3;
qh->td.next_qtd = virt_to_phys(head);
/* hook up QH */
EHCI_INST(dev->controller)->operation->asynclistaddr = virt_to_phys(qh);
/* start async schedule */
EHCI_INST(dev->controller)->operation->async_sched_enable = 1;
while (!EHCI_INST(dev->controller)->operation->async_sched_status) ; /* wait */
result = wait_for_tds(head);
/* disable async schedule */
EHCI_INST(dev->controller)->operation->async_sched_enable = 0;
while (EHCI_INST(dev->controller)->operation->async_sched_status) ; /* wait */
free_qh_and_tds(qh, head);
return result;
}
static void* ehci_create_intr_queue (endpoint_t *ep, int reqsize, int reqcount, int reqtiming)
{
return NULL;
}
static void ehci_destroy_intr_queue (endpoint_t *ep, void *queue)
{
}
static u8* ehci_poll_intr_queue (void *queue)
{
return NULL;
}
hci_t *
ehci_init (pcidev_t addr)
{
int i;
hci_t *controller = new_controller ();
if (!controller)
usb_fatal("Could not create USB controller instance.\n");
controller->instance = malloc (sizeof (ehci_t));
if(!controller->instance)
usb_fatal("Not enough memory creating USB controller instance.\n");
#define PCI_COMMAND 4
#define PCI_COMMAND_IO 1
#define PCI_COMMAND_MEMORY 2
#define PCI_COMMAND_MASTER 4
u32 pci_command = pci_read_config32(addr, PCI_COMMAND);
pci_command = (pci_command | PCI_COMMAND_MEMORY) & ~PCI_COMMAND_IO ;
pci_write_config32(addr, PCI_COMMAND, pci_command);
controller->start = ehci_start;
controller->stop = ehci_stop;
controller->reset = ehci_reset;
controller->shutdown = ehci_shutdown;
controller->bulk = ehci_bulk;
controller->control = ehci_control;
controller->create_intr_queue = ehci_create_intr_queue;
controller->destroy_intr_queue = ehci_destroy_intr_queue;
controller->poll_intr_queue = ehci_poll_intr_queue;
controller->bus_address = addr;
for (i = 0; i < 128; i++) {
controller->devices[i] = 0;
}
init_device_entry (controller, 0);
EHCI_INST(controller)->capabilities = phys_to_virt(pci_read_config32(addr, USBBASE));
EHCI_INST(controller)->operation = (hc_op_t *)(phys_to_virt(pci_read_config32(addr, USBBASE)) + EHCI_INST(controller)->capabilities->caplength);
/* default value for frame length adjust */
pci_write_config8(addr, FLADJ, FLADJ_framelength(60000));
/* Enable operation of controller */
controller->start(controller);
/* take over all ports. USB1 should be blind now */
EHCI_INST(controller)->operation->configflag = 1;
/* TODO lots of stuff missing */
controller->devices[0]->controller = controller;
controller->devices[0]->init = ehci_rh_init;
controller->devices[0]->init (controller->devices[0]);
return controller;
}