coreboot-kgpe-d16/src/arch/x86/boot/mpspec.c

514 lines
16 KiB
C
Raw Normal View History

#include <console/console.h>
#include <device/path.h>
#include <device/pci_ids.h>
#include <cpu/cpu.h>
#include <arch/smp/mpspec.h>
#include <string.h>
#include <arch/cpu.h>
#include <cpu/x86/lapic.h>
#include <drivers/generic/ioapic/chip.h>
Factor out common mptable code to mptable_init(). - Drop sig[], oem[], and productid[] fields in all mptable.c files, no longer needed. The sig[] is always the same ("PCMP"), the oem[] is currently also always the same ("COREBOOT"), and productid is being passed into mptable_init() directly as string now. - LAPIC_ADDR is passed in as parameter, too. While at the moment it's always the same value that is passed in, the LAPIC base address could also be relocated theoretically, so keep it as parameter for now. - Fix a few productid entries, they were (partially) incorrect: - DK8S2 (was "DK8X", copypaste) - 939A785GMH (was "MAHOGANY", copypaste) - X6DHE-G (was "X6DHE", incomplete board name) - H8DME-2 (was "H8DMR", copypaste) - H8QME-2+ (was "H8QME", incomplete board name) - X6DHE-G2 (was "X6DHE", incomplete board name) - X6DHR-iG2 (was "X6DHR-iG", incomplete board name) - GA-M57SLI-S4 (was "M57SLI", incomplete board name) - KINO-780AM2 (was "KINO", incomplete board name) - DL145 G1 (was "DL145G1", small fix as per vendor website) - DL145 G3 (was "TREX", wrong board name) - DL165 G6 (was "HP DL165 G6", drop vendor) - S2912 (was "S2895", copypaste) - VT8454c (was "VIA VT8454C", drop vendor, lower-case "c") - EPIA-N (was "P4DPE", copypaste) - pc2500e (was "PC2500", incorrect name) - S1850 (was "S2850", copy-paste) - MS-7135 (was "MS7135") - MS-9282 (was "MS9282") - MS-9185 (was "MS9185") - MS-9652 (was "K9ND MS-9652") - Ultra 40 (was "ultra40") - E326 (was "E325", copypaste) - M4A785-M (was "TILAPIA", copypaste) - P2B-D (was "ASUS P2B-D", drop vendor) - P2B-DS (was "ASUS P2B-DS", drop vendor) - Adapt the mptable utility to use mptable_init() too. Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5987 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-25 17:32:07 +02:00
/* Initialize the specified "mc" struct with initial values. */
void mptable_init(struct mp_config_table *mc, u32 lapic_addr)
Factor out common mptable code to mptable_init(). - Drop sig[], oem[], and productid[] fields in all mptable.c files, no longer needed. The sig[] is always the same ("PCMP"), the oem[] is currently also always the same ("COREBOOT"), and productid is being passed into mptable_init() directly as string now. - LAPIC_ADDR is passed in as parameter, too. While at the moment it's always the same value that is passed in, the LAPIC base address could also be relocated theoretically, so keep it as parameter for now. - Fix a few productid entries, they were (partially) incorrect: - DK8S2 (was "DK8X", copypaste) - 939A785GMH (was "MAHOGANY", copypaste) - X6DHE-G (was "X6DHE", incomplete board name) - H8DME-2 (was "H8DMR", copypaste) - H8QME-2+ (was "H8QME", incomplete board name) - X6DHE-G2 (was "X6DHE", incomplete board name) - X6DHR-iG2 (was "X6DHR-iG", incomplete board name) - GA-M57SLI-S4 (was "M57SLI", incomplete board name) - KINO-780AM2 (was "KINO", incomplete board name) - DL145 G1 (was "DL145G1", small fix as per vendor website) - DL145 G3 (was "TREX", wrong board name) - DL165 G6 (was "HP DL165 G6", drop vendor) - S2912 (was "S2895", copypaste) - VT8454c (was "VIA VT8454C", drop vendor, lower-case "c") - EPIA-N (was "P4DPE", copypaste) - pc2500e (was "PC2500", incorrect name) - S1850 (was "S2850", copy-paste) - MS-7135 (was "MS7135") - MS-9282 (was "MS9282") - MS-9185 (was "MS9185") - MS-9652 (was "K9ND MS-9652") - Ultra 40 (was "ultra40") - E326 (was "E325", copypaste) - M4A785-M (was "TILAPIA", copypaste) - P2B-D (was "ASUS P2B-D", drop vendor) - P2B-DS (was "ASUS P2B-DS", drop vendor) - Adapt the mptable utility to use mptable_init() too. Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5987 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-25 17:32:07 +02:00
{
int i;
Factor out common mptable code to mptable_init(). - Drop sig[], oem[], and productid[] fields in all mptable.c files, no longer needed. The sig[] is always the same ("PCMP"), the oem[] is currently also always the same ("COREBOOT"), and productid is being passed into mptable_init() directly as string now. - LAPIC_ADDR is passed in as parameter, too. While at the moment it's always the same value that is passed in, the LAPIC base address could also be relocated theoretically, so keep it as parameter for now. - Fix a few productid entries, they were (partially) incorrect: - DK8S2 (was "DK8X", copypaste) - 939A785GMH (was "MAHOGANY", copypaste) - X6DHE-G (was "X6DHE", incomplete board name) - H8DME-2 (was "H8DMR", copypaste) - H8QME-2+ (was "H8QME", incomplete board name) - X6DHE-G2 (was "X6DHE", incomplete board name) - X6DHR-iG2 (was "X6DHR-iG", incomplete board name) - GA-M57SLI-S4 (was "M57SLI", incomplete board name) - KINO-780AM2 (was "KINO", incomplete board name) - DL145 G1 (was "DL145G1", small fix as per vendor website) - DL145 G3 (was "TREX", wrong board name) - DL165 G6 (was "HP DL165 G6", drop vendor) - S2912 (was "S2895", copypaste) - VT8454c (was "VIA VT8454C", drop vendor, lower-case "c") - EPIA-N (was "P4DPE", copypaste) - pc2500e (was "PC2500", incorrect name) - S1850 (was "S2850", copy-paste) - MS-7135 (was "MS7135") - MS-9282 (was "MS9282") - MS-9185 (was "MS9185") - MS-9652 (was "K9ND MS-9652") - Ultra 40 (was "ultra40") - E326 (was "E325", copypaste) - M4A785-M (was "TILAPIA", copypaste) - P2B-D (was "ASUS P2B-D", drop vendor) - P2B-DS (was "ASUS P2B-DS", drop vendor) - Adapt the mptable utility to use mptable_init() too. Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5987 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-25 17:32:07 +02:00
memset(mc, 0, sizeof(*mc));
Factor out common mptable code to mptable_init(). - Drop sig[], oem[], and productid[] fields in all mptable.c files, no longer needed. The sig[] is always the same ("PCMP"), the oem[] is currently also always the same ("COREBOOT"), and productid is being passed into mptable_init() directly as string now. - LAPIC_ADDR is passed in as parameter, too. While at the moment it's always the same value that is passed in, the LAPIC base address could also be relocated theoretically, so keep it as parameter for now. - Fix a few productid entries, they were (partially) incorrect: - DK8S2 (was "DK8X", copypaste) - 939A785GMH (was "MAHOGANY", copypaste) - X6DHE-G (was "X6DHE", incomplete board name) - H8DME-2 (was "H8DMR", copypaste) - H8QME-2+ (was "H8QME", incomplete board name) - X6DHE-G2 (was "X6DHE", incomplete board name) - X6DHR-iG2 (was "X6DHR-iG", incomplete board name) - GA-M57SLI-S4 (was "M57SLI", incomplete board name) - KINO-780AM2 (was "KINO", incomplete board name) - DL145 G1 (was "DL145G1", small fix as per vendor website) - DL145 G3 (was "TREX", wrong board name) - DL165 G6 (was "HP DL165 G6", drop vendor) - S2912 (was "S2895", copypaste) - VT8454c (was "VIA VT8454C", drop vendor, lower-case "c") - EPIA-N (was "P4DPE", copypaste) - pc2500e (was "PC2500", incorrect name) - S1850 (was "S2850", copy-paste) - MS-7135 (was "MS7135") - MS-9282 (was "MS9282") - MS-9185 (was "MS9185") - MS-9652 (was "K9ND MS-9652") - Ultra 40 (was "ultra40") - E326 (was "E325", copypaste) - M4A785-M (was "TILAPIA", copypaste) - P2B-D (was "ASUS P2B-D", drop vendor) - P2B-DS (was "ASUS P2B-DS", drop vendor) - Adapt the mptable utility to use mptable_init() too. Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5987 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-25 17:32:07 +02:00
memcpy(mc->mpc_signature, MPC_SIGNATURE, 4);
Factor out common mptable code to mptable_init(). - Drop sig[], oem[], and productid[] fields in all mptable.c files, no longer needed. The sig[] is always the same ("PCMP"), the oem[] is currently also always the same ("COREBOOT"), and productid is being passed into mptable_init() directly as string now. - LAPIC_ADDR is passed in as parameter, too. While at the moment it's always the same value that is passed in, the LAPIC base address could also be relocated theoretically, so keep it as parameter for now. - Fix a few productid entries, they were (partially) incorrect: - DK8S2 (was "DK8X", copypaste) - 939A785GMH (was "MAHOGANY", copypaste) - X6DHE-G (was "X6DHE", incomplete board name) - H8DME-2 (was "H8DMR", copypaste) - H8QME-2+ (was "H8QME", incomplete board name) - X6DHE-G2 (was "X6DHE", incomplete board name) - X6DHR-iG2 (was "X6DHR-iG", incomplete board name) - GA-M57SLI-S4 (was "M57SLI", incomplete board name) - KINO-780AM2 (was "KINO", incomplete board name) - DL145 G1 (was "DL145G1", small fix as per vendor website) - DL145 G3 (was "TREX", wrong board name) - DL165 G6 (was "HP DL165 G6", drop vendor) - S2912 (was "S2895", copypaste) - VT8454c (was "VIA VT8454C", drop vendor, lower-case "c") - EPIA-N (was "P4DPE", copypaste) - pc2500e (was "PC2500", incorrect name) - S1850 (was "S2850", copy-paste) - MS-7135 (was "MS7135") - MS-9282 (was "MS9282") - MS-9185 (was "MS9185") - MS-9652 (was "K9ND MS-9652") - Ultra 40 (was "ultra40") - E326 (was "E325", copypaste) - M4A785-M (was "TILAPIA", copypaste) - P2B-D (was "ASUS P2B-D", drop vendor) - P2B-DS (was "ASUS P2B-DS", drop vendor) - Adapt the mptable utility to use mptable_init() too. Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5987 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-25 17:32:07 +02:00
mc->mpc_length = sizeof(*mc); /* Initially just the header size. */
mc->mpc_spec = 0x04; /* MultiProcessor specification 1.4 */
mc->mpc_checksum = 0; /* Not yet computed. */
mc->mpc_oemptr = 0;
mc->mpc_oemsize = 0;
mc->mpc_entry_count = 0; /* No entries yet... */
mc->mpc_lapic = lapic_addr;
mc->mpe_length = 0;
mc->mpe_checksum = 0;
mc->reserved = 0;
strncpy(mc->mpc_oem, CONFIG_MAINBOARD_VENDOR, 8);
strncpy(mc->mpc_productid, CONFIG_MAINBOARD_PART_NUMBER, 12);
/*
* The oem/productid fields are exactly 8/12 bytes long. If the resp.
* entry is shorter, the remaining bytes are filled with spaces.
*/
for (i = MIN(strlen(CONFIG_MAINBOARD_VENDOR), 8); i < 8; i++)
mc->mpc_oem[i] = ' ';
for (i = MIN(strlen(CONFIG_MAINBOARD_PART_NUMBER), 12); i < 12; i++)
mc->mpc_productid[i] = ' ';
Factor out common mptable code to mptable_init(). - Drop sig[], oem[], and productid[] fields in all mptable.c files, no longer needed. The sig[] is always the same ("PCMP"), the oem[] is currently also always the same ("COREBOOT"), and productid is being passed into mptable_init() directly as string now. - LAPIC_ADDR is passed in as parameter, too. While at the moment it's always the same value that is passed in, the LAPIC base address could also be relocated theoretically, so keep it as parameter for now. - Fix a few productid entries, they were (partially) incorrect: - DK8S2 (was "DK8X", copypaste) - 939A785GMH (was "MAHOGANY", copypaste) - X6DHE-G (was "X6DHE", incomplete board name) - H8DME-2 (was "H8DMR", copypaste) - H8QME-2+ (was "H8QME", incomplete board name) - X6DHE-G2 (was "X6DHE", incomplete board name) - X6DHR-iG2 (was "X6DHR-iG", incomplete board name) - GA-M57SLI-S4 (was "M57SLI", incomplete board name) - KINO-780AM2 (was "KINO", incomplete board name) - DL145 G1 (was "DL145G1", small fix as per vendor website) - DL145 G3 (was "TREX", wrong board name) - DL165 G6 (was "HP DL165 G6", drop vendor) - S2912 (was "S2895", copypaste) - VT8454c (was "VIA VT8454C", drop vendor, lower-case "c") - EPIA-N (was "P4DPE", copypaste) - pc2500e (was "PC2500", incorrect name) - S1850 (was "S2850", copy-paste) - MS-7135 (was "MS7135") - MS-9282 (was "MS9282") - MS-9185 (was "MS9185") - MS-9652 (was "K9ND MS-9652") - Ultra 40 (was "ultra40") - E326 (was "E325", copypaste) - M4A785-M (was "TILAPIA", copypaste) - P2B-D (was "ASUS P2B-D", drop vendor) - P2B-DS (was "ASUS P2B-DS", drop vendor) - Adapt the mptable utility to use mptable_init() too. Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5987 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-25 17:32:07 +02:00
}
static unsigned char smp_compute_checksum(void *v, int len)
{
unsigned char *bytes;
unsigned char checksum;
int i;
bytes = v;
checksum = 0;
for(i = 0; i < len; i++) {
checksum -= bytes[i];
}
return checksum;
}
static void *smp_write_floating_table_physaddr(unsigned long addr, unsigned long mpf_physptr, unsigned int virtualwire)
{
struct intel_mp_floating *mf;
void *v;
v = (void *)addr;
mf = v;
mf->mpf_signature[0] = '_';
mf->mpf_signature[1] = 'M';
mf->mpf_signature[2] = 'P';
mf->mpf_signature[3] = '_';
mf->mpf_physptr = mpf_physptr;
mf->mpf_length = 1;
mf->mpf_specification = 4;
mf->mpf_checksum = 0;
mf->mpf_feature1 = 0;
mf->mpf_feature2 = virtualwire?MP_FEATURE_VIRTUALWIRE:0;
mf->mpf_feature3 = 0;
mf->mpf_feature4 = 0;
mf->mpf_feature5 = 0;
mf->mpf_checksum = smp_compute_checksum(mf, mf->mpf_length*16);
return v;
}
void *smp_write_floating_table(unsigned long addr, unsigned int virtualwire)
{
/* 16 byte align the table address */
addr = (addr + 0xf) & (~0xf);
return smp_write_floating_table_physaddr(addr, addr + SMP_FLOATING_TABLE_LEN, virtualwire);
}
void *smp_next_mpc_entry(struct mp_config_table *mc)
{
void *v;
v = (void *)(((char *)mc) + mc->mpc_length);
return v;
}
static void smp_add_mpc_entry(struct mp_config_table *mc, unsigned length)
{
mc->mpc_length += length;
mc->mpc_entry_count++;
}
void *smp_next_mpe_entry(struct mp_config_table *mc)
{
void *v;
v = (void *)(((char *)mc) + mc->mpc_length + mc->mpe_length);
return v;
}
static void smp_add_mpe_entry(struct mp_config_table *mc, mpe_t mpe)
{
mc->mpe_length += mpe->mpe_length;
}
void smp_write_processor(struct mp_config_table *mc,
unsigned char apicid, unsigned char apicver,
unsigned char cpuflag, unsigned int cpufeature,
unsigned int featureflag)
{
struct mpc_config_processor *mpc;
mpc = smp_next_mpc_entry(mc);
memset(mpc, '\0', sizeof(*mpc));
mpc->mpc_type = MP_PROCESSOR;
mpc->mpc_apicid = apicid;
mpc->mpc_apicver = apicver;
mpc->mpc_cpuflag = cpuflag;
mpc->mpc_cpufeature = cpufeature;
mpc->mpc_featureflag = featureflag;
smp_add_mpc_entry(mc, sizeof(*mpc));
}
/* If we assume a symmetric processor configuration we can
* get all of the information we need to write the processor
* entry from the bootstrap processor.
* Plus I don't think linux really even cares.
* Having the proper apicid's in the table so the non-bootstrap
* processors can be woken up should be enough.
*/
void smp_write_processors(struct mp_config_table *mc)
{
int boot_apic_id;
int order_id;
unsigned apic_version;
unsigned cpu_features;
unsigned cpu_feature_flags;
struct cpuid_result result;
device_t cpu;
boot_apic_id = lapicid();
apic_version = lapic_read(LAPIC_LVR) & 0xff;
result = cpuid(1);
cpu_features = result.eax;
cpu_feature_flags = result.edx;
/* order the output of the cpus to fix a bug in kernel 2.6.11 */
for(order_id = 0;order_id <256; order_id++) {
for(cpu = all_devices; cpu; cpu = cpu->next) {
unsigned long cpu_flag;
if ((cpu->path.type != DEVICE_PATH_APIC) ||
(cpu->bus->dev->path.type != DEVICE_PATH_APIC_CLUSTER))
{
continue;
}
if (!cpu->enabled) {
continue;
}
cpu_flag = MPC_CPU_ENABLED;
if (boot_apic_id == cpu->path.apic.apic_id) {
cpu_flag = MPC_CPU_ENABLED | MPC_CPU_BOOTPROCESSOR;
}
if(cpu->path.apic.apic_id == order_id) {
smp_write_processor(mc,
cpu->path.apic.apic_id, apic_version,
cpu_flag, cpu_features, cpu_feature_flags
);
break;
}
}
}
}
static void smp_write_bus(struct mp_config_table *mc,
unsigned char id, const char *bustype)
{
struct mpc_config_bus *mpc;
mpc = smp_next_mpc_entry(mc);
memset(mpc, '\0', sizeof(*mpc));
mpc->mpc_type = MP_BUS;
mpc->mpc_busid = id;
memcpy(mpc->mpc_bustype, bustype, sizeof(mpc->mpc_bustype));
smp_add_mpc_entry(mc, sizeof(*mpc));
}
void smp_write_ioapic(struct mp_config_table *mc,
unsigned char id, unsigned char ver,
unsigned long apicaddr)
{
struct mpc_config_ioapic *mpc;
mpc = smp_next_mpc_entry(mc);
memset(mpc, '\0', sizeof(*mpc));
mpc->mpc_type = MP_IOAPIC;
mpc->mpc_apicid = id;
mpc->mpc_apicver = ver;
mpc->mpc_flags = MPC_APIC_USABLE;
mpc->mpc_apicaddr = apicaddr;
smp_add_mpc_entry(mc, sizeof(*mpc));
}
void smp_write_intsrc(struct mp_config_table *mc,
unsigned char irqtype, unsigned short irqflag,
unsigned char srcbus, unsigned char srcbusirq,
unsigned char dstapic, unsigned char dstirq)
{
struct mpc_config_intsrc *mpc;
mpc = smp_next_mpc_entry(mc);
memset(mpc, '\0', sizeof(*mpc));
mpc->mpc_type = MP_INTSRC;
mpc->mpc_irqtype = irqtype;
mpc->mpc_irqflag = irqflag;
mpc->mpc_srcbus = srcbus;
mpc->mpc_srcbusirq = srcbusirq;
mpc->mpc_dstapic = dstapic;
mpc->mpc_dstirq = dstirq;
smp_add_mpc_entry(mc, sizeof(*mpc));
#ifdef DEBUG_MPTABLE
printk(BIOS_DEBUG, "add intsrc srcbus 0x%x srcbusirq 0x%x, dstapic 0x%x, dstirq 0x%x\n",
srcbus, srcbusirq, dstapic, dstirq);
hexdump(__func__, mpc, sizeof(*mpc));
#endif
}
void smp_write_intsrc_pci_bridge(struct mp_config_table *mc,
unsigned char irqtype, unsigned short irqflag,
struct device *dev,
unsigned char dstapic, unsigned char *dstirq)
{
struct device *child;
int i;
int srcbus;
int slot;
struct bus *link;
unsigned char dstirq_x[4];
for (link = dev->link_list; link; link = link->next) {
child = link->children;
srcbus = link->secondary;
while (child) {
if (child->path.type != DEVICE_PATH_PCI)
goto next;
slot = (child->path.pci.devfn >> 3);
/* round pins */
for (i = 0; i < 4; i++)
dstirq_x[i] = dstirq[(i + slot) % 4];
if ((child->class >> 16) != PCI_BASE_CLASS_BRIDGE) {
/* pci device */
printk(BIOS_DEBUG, "route irq: %s\n", dev_path(child));
for (i = 0; i < 4; i++)
smp_write_intsrc(mc, irqtype, irqflag, srcbus, (slot<<2)|i, dstapic, dstirq_x[i]);
goto next;
}
switch (child->class>>8) {
case PCI_CLASS_BRIDGE_PCI:
case PCI_CLASS_BRIDGE_PCMCIA:
case PCI_CLASS_BRIDGE_CARDBUS:
printk(BIOS_DEBUG, "route irq bridge: %s\n", dev_path(child));
smp_write_intsrc_pci_bridge(mc, irqtype, irqflag, child, dstapic, dstirq_x);
}
next:
child = child->sibling;
}
}
}
void smp_write_lintsrc(struct mp_config_table *mc,
unsigned char irqtype, unsigned short irqflag,
unsigned char srcbusid, unsigned char srcbusirq,
unsigned char destapic, unsigned char destapiclint)
{
struct mpc_config_lintsrc *mpc;
mpc = smp_next_mpc_entry(mc);
memset(mpc, '\0', sizeof(*mpc));
mpc->mpc_type = MP_LINTSRC;
mpc->mpc_irqtype = irqtype;
mpc->mpc_irqflag = irqflag;
mpc->mpc_srcbusid = srcbusid;
mpc->mpc_srcbusirq = srcbusirq;
mpc->mpc_destapic = destapic;
mpc->mpc_destapiclint = destapiclint;
smp_add_mpc_entry(mc, sizeof(*mpc));
}
void smp_write_address_space(struct mp_config_table *mc,
unsigned char busid, unsigned char address_type,
unsigned int address_base_low, unsigned int address_base_high,
unsigned int address_length_low, unsigned int address_length_high)
{
struct mp_exten_system_address_space *mpe;
mpe = smp_next_mpe_entry(mc);
memset(mpe, '\0', sizeof(*mpe));
mpe->mpe_type = MPE_SYSTEM_ADDRESS_SPACE;
mpe->mpe_length = sizeof(*mpe);
mpe->mpe_busid = busid;
mpe->mpe_address_type = address_type;
mpe->mpe_address_base_low = address_base_low;
mpe->mpe_address_base_high = address_base_high;
mpe->mpe_address_length_low = address_length_low;
mpe->mpe_address_length_high = address_length_high;
smp_add_mpe_entry(mc, (mpe_t)mpe);
}
void smp_write_bus_hierarchy(struct mp_config_table *mc,
unsigned char busid, unsigned char bus_info,
unsigned char parent_busid)
{
struct mp_exten_bus_hierarchy *mpe;
mpe = smp_next_mpe_entry(mc);
memset(mpe, '\0', sizeof(*mpe));
mpe->mpe_type = MPE_BUS_HIERARCHY;
mpe->mpe_length = sizeof(*mpe);
mpe->mpe_busid = busid;
mpe->mpe_bus_info = bus_info;
mpe->mpe_parent_busid = parent_busid;
smp_add_mpe_entry(mc, (mpe_t)mpe);
}
void smp_write_compatibility_address_space(struct mp_config_table *mc,
unsigned char busid, unsigned char address_modifier,
unsigned int range_list)
{
struct mp_exten_compatibility_address_space *mpe;
mpe = smp_next_mpe_entry(mc);
memset(mpe, '\0', sizeof(*mpe));
mpe->mpe_type = MPE_COMPATIBILITY_ADDRESS_SPACE;
mpe->mpe_length = sizeof(*mpe);
mpe->mpe_busid = busid;
mpe->mpe_address_modifier = address_modifier;
mpe->mpe_range_list = range_list;
smp_add_mpe_entry(mc, (mpe_t)mpe);
}
mptable: Refactor lintsrc generation We copied pretty much the same code for generating mptable entries for local interrupts (with some notable exceptions). This change moves these lines into a generic function "mptable_lintsrc" and makes use of it in many places. The remaining uses of smp_write_lintsrc should be reviewed and replaced by mptable_lintsrc calls where possible, and smp_write_lintsrc made static. This patch was generated using Coccinelle: @@ expression mc; expression isa_bus; @@ -smp_write_lintsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x0, MP_APIC_ALL, 0x0); -smp_write_lintsrc(mc, mp_NMI, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x0, MP_APIC_ALL, 0x1); +mptable_lintsrc(mc, isa_bus); @@ expression mc; expression isa_bus; @@ -smp_write_lintsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, isa_bus, 0x0, MP_APIC_ALL, 0x0); -smp_write_lintsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, isa_bus, 0x0, MP_APIC_ALL, 0x1); +mptable_lintsrc(mc, isa_bus); @m@ identifier mc; expression BUS; @@ -#define IO_LOCAL_INT(type, intr, apicid, pin) smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, BUS, (intr), (apicid), (pin)); ... -IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); -IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); +mptable_lintsrc(mc, BUS); Change-Id: I97421f820cd039f5fd753cb0da5c1cca68819bb4 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/244 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-07 21:42:52 +02:00
void mptable_lintsrc(struct mp_config_table *mc, unsigned long bus_isa)
{
smp_write_lintsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x0);
smp_write_lintsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x1);
}
void mptable_add_isa_interrupts(struct mp_config_table *mc, unsigned long bus_isa, unsigned long apicid, int external_int2)
{
/*I/O Ints: Type Trigger Polarity Bus ID IRQ APIC ID PIN# */
smp_write_intsrc(mc, external_int2?mp_INT:mp_ExtINT,
MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid, 0x0);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, apicid, 0x1);
smp_write_intsrc(mc, external_int2?mp_ExtINT:mp_INT,
MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid, 0x2);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x3, apicid, 0x3);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x4, apicid, 0x4);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x6, apicid, 0x6);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x7, apicid, 0x7);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x8, apicid, 0x8);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x9, apicid, 0x9);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xa, apicid, 0xa);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xb, apicid, 0xb);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xc, apicid, 0xc);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xd, apicid, 0xd);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xe, apicid, 0xe);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid, 0xf);
}
void mptable_write_buses(struct mp_config_table *mc, int *max_pci_bus, int *isa_bus) {
int dummy, i, highest;
char buses[256];
struct device *dev;
if (!max_pci_bus) max_pci_bus = &dummy;
if (!isa_bus) isa_bus = &dummy;
*max_pci_bus = 0;
highest = 0;
memset(buses, 0, sizeof(buses));
for (dev = all_devices; dev; dev = dev->next) {
struct bus *bus;
for (bus = dev->link_list; bus; bus = bus->next) {
if (bus->secondary > 255) {
printk(BIOS_ERR, "A bus claims to have a bus ID > 255?!? Aborting");
return;
}
buses[bus->secondary] = 1;
if (highest < bus->secondary) highest = bus->secondary;
}
}
for (i=0; i <= highest; i++) {
if (buses[i]) {
smp_write_bus(mc, i, "PCI ");
*max_pci_bus = i;
}
}
*isa_bus = *max_pci_bus + 1;
smp_write_bus(mc, *isa_bus, "ISA ");
}
void *mptable_finalize(struct mp_config_table *mc)
{
mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc));
return smp_next_mpe_entry(mc);
}
unsigned long __attribute__((weak)) write_smp_table(unsigned long addr)
{
struct drivers_generic_ioapic_config *ioapic_config;
struct mp_config_table *mc;
int isa_bus, pin, parentpin;
device_t dev, parent, oldparent;
void *tmp, *v;
int isaioapic = -1;
v = smp_write_floating_table(addr, 0);
mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
mptable_init(mc, LOCAL_APIC_ADDR);
smp_write_processors(mc);
mptable_write_buses(mc, NULL, &isa_bus);
for(dev = all_devices; dev; dev = dev->next) {
if (dev->path.type != DEVICE_PATH_IOAPIC)
continue;
if (!(ioapic_config = dev->chip_info)) {
printk(BIOS_ERR, "%s has no config, ignoring\n", dev_path(dev));
continue;
}
smp_write_ioapic(mc, dev->path.ioapic.ioapic_id,
ioapic_config->version,
ioapic_config->base);
if (ioapic_config->have_isa_interrupts) {
if (isaioapic >= 0)
printk(BIOS_ERR, "More than one IOAPIC with ISA interrupts?\n");
else
isaioapic = dev->path.ioapic.ioapic_id;
}
}
if (isaioapic >= 0) {
/* Legacy Interrupts */
printk(BIOS_DEBUG, "Writing ISA IRQs\n");
mptable_add_isa_interrupts(mc, isa_bus, isaioapic, 0);
}
for(dev = all_devices; dev; dev = dev->next) {
if (dev->path.type != DEVICE_PATH_PCI || !dev->enabled)
continue;
pin = (dev->path.pci.devfn & 7) % 4;
if (dev->pci_irq_info[pin].ioapic_dst_id) {
printk(BIOS_DEBUG, "fixed IRQ entry for: %s: INT%c# -> IOAPIC %d PIN %d\n", dev_path(dev),
pin + 'A',
dev->pci_irq_info[pin].ioapic_dst_id,
dev->pci_irq_info[pin].ioapic_irq_pin);
smp_write_intsrc(mc, mp_INT,
dev->pci_irq_info[pin].ioapic_flags,
dev->bus->secondary,
((dev->path.pci.devfn & 0xf8) >> 1) | pin,
dev->pci_irq_info[pin].ioapic_dst_id,
dev->pci_irq_info[pin].ioapic_irq_pin);
} else {
oldparent = parent = dev;
while((parent = parent->bus->dev)) {
parentpin = (oldparent->path.pci.devfn >> 3) + (oldparent->path.pci.devfn & 7);
parentpin += dev->path.pci.devfn & 7;
parentpin += dev->path.pci.devfn >> 3;
parentpin %= 4;
if (parent->pci_irq_info[parentpin].ioapic_dst_id) {
printk(BIOS_DEBUG, "automatic IRQ entry for %s: INT%c# -> IOAPIC %d PIN %d\n",
dev_path(dev), pin + 'A',
parent->pci_irq_info[parentpin].ioapic_dst_id,
parent->pci_irq_info[parentpin].ioapic_irq_pin);
smp_write_intsrc(mc, mp_INT,
parent->pci_irq_info[parentpin].ioapic_flags,
dev->bus->secondary,
((dev->path.pci.devfn & 0xf8) >> 1) | pin,
parent->pci_irq_info[parentpin].ioapic_dst_id,
parent->pci_irq_info[parentpin].ioapic_irq_pin);
break;
}
if (parent->path.type == DEVICE_PATH_PCI_DOMAIN) {
printk(BIOS_WARNING, "no IRQ found for %s\n", dev_path(dev));
break;
}
oldparent = parent;
}
}
}
mptable_lintsrc(mc, isa_bus);
tmp = mptable_finalize(mc);
printk(BIOS_INFO, "MPTABLE len: %d\n", (unsigned int)tmp - (unsigned int)v);
return (unsigned long)tmp;
}