coreboot-kgpe-d16/src/pc80/keyboard.c

61 lines
1.5 KiB
C
Raw Normal View History

- Moved hlt() to it's own header. - Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11 16:01:31 +01:00
#include <console/console.h>
#include <pc80/keyboard.h>
#include <device/device.h>
#include <arch/io.h>
/* much better keyboard init courtesy ollie@sis.com.tw
TODO: Typematic Setting, the keyboard is too slow for me */
mpspec.h: Tweak the write_smp_table macro so that it is safe if passed a complex expression. crt0.S.lb: Modified so that it is safe to include console.inc console.c: Added print_debug_ and frieds which are non inline variants of the normal console functions div64.h: Only include limits.h if ULONG_MAX is not defined and define ULONG_MAX on ppc socket_754/Config.lb Conditionally set config chip.h socket_940.c We don't need and #if CONFIG_CHIP_NAME we won't be linked in if there are no references. slot_2/chip.h: The operations struct need to be spelled cpu_intelt_slot_2_ops slot_2/slot2.c: The same spelling fix socket_mPGA603/chip.h: again socket_mPGA603/socket_mPGA603_400Mhz.c: and again socket_mPGA604_533Mhz/Config.lb: Conditionally defing CONFIG_CHIP_NAME socket_mPGA604_800Mhz/chip.h: Another spelling fix socket_mPGA604_800Mhz.c and again via/model_centaur/model_centaur_init.c: It's not an intel CPU so don't worry about Intel microcode uptdates earlymtrr.c: Remove work around for older versions of romcc pci_ids.h: More ids. malloc.c: We don't need string.h any longer uart8250.c: Be consistent when delcaring functions static inline arima/hdama/mptable.c: Cleanup to be a little more consistent amdk8/coherent_ht.c: - Talk about nodes not cpus (In preparation for dual cores) - Remove clear_temp_row (as it is no longer needed) - Demoted the failure messages to spew. - Modified to gracefully handle failure (It should work now if cpus are removed) - Handle the non-SMP case in verify_mp_capabilities - Add clear_dead_routes which replaces clear_temp_row and does more - Reorganize setup_coherent_ht_domain to cleanly handle failure. - incoherent_ht.c: Clean up the indenation a little. i8259.c: remove blank lines at the start of the file. keyboard.c: Make pc_keyboard_init static ramtest.c: Add a print out limiter, and cleanup the printout a little. amd8111/Config.lb: Mention amd8111_smbus.c amd8111_usb.c: Call the structure usb_ops not smbus_ops. NSC/pc97307/chip.h: Fix spelling issue pc97307/superio.c: Use &ops no &pnp_ops. w83627hf/suerio.c: ditto w83627thf/suerio.c: ditto buildrom.c: Use braces around the body of a for loop. It's more maintainable. git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1778 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-11-11 07:53:24 +01:00
static void pc_keyboard_init(struct pc_keyboard *keyboard)
{
volatile unsigned char regval;
/* send cmd = 0xAA, self test 8042 */
outb(0xaa, 0x64);
/* empty input buffer or any other command/data will be lost */
while ((inb(0x64) & 0x02))
post_code(0);
/* empty output buffer or any other command/data will be lost */
while ((inb(0x64) & 0x01) == 0)
post_code(1);
/* read self-test result, 0x55 should be returned form 0x60 */
if ((regval = inb(0x60) != 0x55))
return;
/* enable keyboard interface */
outb(0x60, 0x64);
while ((inb(0x64) & 0x02))
post_code(2);
/* send cmd: enable IRQ 1 */
outb(0x61, 0x60);
while ((inb(0x64) & 0x02))
post_code(3);
/* reset kerboard and self test (keyboard side) */
outb(0xff, 0x60);
/* empty inut bufferm or any other command/data will be lost */
while ((inb(0x64) & 0x02))
post_code(4);
/* empty output buffer or any other command/data will be lost */
while ((inb(0x64) & 0x01) == 0)
post_code(5);
if ((regval = inb(0x60) != 0xfa))
return;
while ((inb(0x64) & 0x01) == 0)
post_code(6);
if ((regval = inb(0x60) != 0xaa))
return;
}
- Moved hlt() to it's own header. - Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11 16:01:31 +01:00
void init_pc_keyboard(unsigned port0, unsigned port1, struct pc_keyboard *kbd)
{
if ((port0 == 0x60) && (port1 == 0x64)) {
pc_keyboard_init(kbd);
}
}