GNUBoot/coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
coreboot-kgpe-d16/src/mainboard/pcengines/apu2/cmos.layout

66 lines
2 KiB
Text
Raw Normal View History

pcengines/apu2: add board support Initial work based on db-ft3b-ls and code released by Eltan. Board boots with some limitation. Now the AGESA binary is harcoded and board specific until it's fixed by the SoC vendor. memtest86+ from external repo skips looking for SPD on SMBus, which when performed cause memtest86+ to hang. Still didn't tried whole test suit. SeaBIOS 1.9.3 have some problems with USB which lead to no booting in some cases. Full log: https://gist.github.com/pietrushnic/787cbf63f610ff4f6b4ac13e5c20b872 SeaBIOS from PC Engines repository (https://github.com/pcengines/seabios) works fine. Those changes are planned for upstream. Information about obtaining and booting Voyage Linux: https://github.com/pcengines/apu2-documentation#building-firmware-using-apu2-image-builder Change-Id: Id23e448e27f4bba47b7e9e7fa7679e2690c6e4bc Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/14138 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-05-27 12:04:13 +02:00
#*****************************************************************************
#
# This file is part of the coreboot project.
#
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; version 2 of the License.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#*****************************************************************************
entries
0 384 r 0 reserved_memory
384 1 e 4 boot_option
388 4 r 0 reboot_bits
mb/*/*: Remove rtc nvram configurable baud rate There have been discussions about removing this since it does not seem to be used much and only creates troubles for boards without defaults, not to mention that it was configurable on many boards that do not even feature uart. It is still possible to configure the baudrate through the Kconfig option. Change-Id: I71698d9b188eeac73670b18b757dff5fcea0df41 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-12 21:16:41 +02:00
#392 3 r 0 unused
pcengines/apu2: add board support Initial work based on db-ft3b-ls and code released by Eltan. Board boots with some limitation. Now the AGESA binary is harcoded and board specific until it's fixed by the SoC vendor. memtest86+ from external repo skips looking for SPD on SMBus, which when performed cause memtest86+ to hang. Still didn't tried whole test suit. SeaBIOS 1.9.3 have some problems with USB which lead to no booting in some cases. Full log: https://gist.github.com/pietrushnic/787cbf63f610ff4f6b4ac13e5c20b872 SeaBIOS from PC Engines repository (https://github.com/pcengines/seabios) works fine. Those changes are planned for upstream. Information about obtaining and booting Voyage Linux: https://github.com/pcengines/apu2-documentation#building-firmware-using-apu2-image-builder Change-Id: Id23e448e27f4bba47b7e9e7fa7679e2690c6e4bc Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/14138 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-05-27 12:04:13 +02:00
395 1 e 1 hw_scrubber
396 1 e 1 interleave_chip_selects
397 2 e 8 max_mem_clock
399 1 e 2 multi_core
400 1 e 1 power_on_after_fail
412 4 e 6 debug_level
440 4 e 9 slow_cpu
444 1 e 1 nmi
445 1 e 1 iommu
456 1 e 1 ECC_memory
728 256 h 0 user_data
984 16 h 0 check_sum
# Reserve the extended AMD configuration registers
1000 24 r 0 amd_reserved
enumerations
#ID value text
1 0 Disable
1 1 Enable
2 0 Enable
2 1 Disable
4 0 Fallback
4 1 Normal
mb/*/*/cmos.layout: Fix the values for the console level Fix the values that were off by one. This was discovered when using postcar stage that prints with debuglevel BIOS_NEVER. Change-Id: I73a077950ed0dc735d89c9747a8da0a25f30822d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23186 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-09 16:51:33 +01:00
6 5 Notice
6 6 Info
6 7 Debug
6 8 Spew
pcengines/apu2: add board support Initial work based on db-ft3b-ls and code released by Eltan. Board boots with some limitation. Now the AGESA binary is harcoded and board specific until it's fixed by the SoC vendor. memtest86+ from external repo skips looking for SPD on SMBus, which when performed cause memtest86+ to hang. Still didn't tried whole test suit. SeaBIOS 1.9.3 have some problems with USB which lead to no booting in some cases. Full log: https://gist.github.com/pietrushnic/787cbf63f610ff4f6b4ac13e5c20b872 SeaBIOS from PC Engines repository (https://github.com/pcengines/seabios) works fine. Those changes are planned for upstream. Information about obtaining and booting Voyage Linux: https://github.com/pcengines/apu2-documentation#building-firmware-using-apu2-image-builder Change-Id: Id23e448e27f4bba47b7e9e7fa7679e2690c6e4bc Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/14138 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-05-27 12:04:13 +02:00
8 0 400Mhz
8 1 333Mhz
8 2 266Mhz
8 3 200Mhz
9 0 off
9 1 87.5%
9 2 75.0%
9 3 62.5%
9 4 50.0%
9 5 37.5%
9 6 25.0%
9 7 12.5%
checksums
checksum 392 983 984
Reference in a new issue Copy permalink