GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
coreboot-kgpe-d16/Documentation/mainboard/portwell/pq7-m107.md

81 lines
2.4 KiB
Markdown
Raw Normal View History

mainboard/portwell/m107: Do initial mainboard commit Initial support for Portwell PQ7-M107 (Q7) module. Code based on Intel Strago mainboard. BUG=N/A TEST=booting SeaBIOS and Linux 4.20 kernel on PQ7-M107 Change-Id: I7d3173fdcf881f894a75cd9798ba173b425d4e62 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29470 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-15 08:48:55 +02:00
# Portwell PQ7-M107
This page describes how to run coreboot on the [Portwell PQ7-M107].
PQ7-M107 are assembled with different onboard memory modules:
Rev 1.0 Onboard Samsung K4B8G1646D-MYKO memory
mb/portwell/m107: Add Kingston memory support Add support for board revision 1.3 containing Kingston memory. BUG=N/A TEST=tested on portwell m107 module Change-Id: I436698ee079952580c764e840ee0ad2e18ea8d3b Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36502 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-10-31 10:13:17 +01:00
Rev 1.1 and 1.2 Onboard Micron MT41K512M16HA-125A memory
Rev 1.3 Onboard Kingston B5116ECMDXGGB memory
mainboard/portwell/m107: Do initial mainboard commit Initial support for Portwell PQ7-M107 (Q7) module. Code based on Intel Strago mainboard. BUG=N/A TEST=booting SeaBIOS and Linux 4.20 kernel on PQ7-M107 Change-Id: I7d3173fdcf881f894a75cd9798ba173b425d4e62 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29470 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-15 08:48:55 +02:00
mb/portwell/m107: Add Kingston memory support Add support for board revision 1.3 containing Kingston memory. BUG=N/A TEST=tested on portwell m107 module Change-Id: I436698ee079952580c764e840ee0ad2e18ea8d3b Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36502 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-10-31 10:13:17 +01:00
Use 'make menuconfig' to configure `onboard memory manufacturer` in Mainboard
mainboard/portwell/m107: Do initial mainboard commit Initial support for Portwell PQ7-M107 (Q7) module. Code based on Intel Strago mainboard. BUG=N/A TEST=booting SeaBIOS and Linux 4.20 kernel on PQ7-M107 Change-Id: I7d3173fdcf881f894a75cd9798ba173b425d4e62 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29470 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-15 08:48:55 +02:00
menu.
## Required blobs
This board currently requires:
fsp blob 3rdparty/fsp/BraswellFspBinPkg/FspBin/BSWFSP.fd
Microcode Intel Braswell cpuid 1046C4 version 410
(Used pre-built binary retrieved from Intel site)
## Flashing coreboot
### Internal programming
The main SPI flash can be accessed using [flashrom].
### External programming
The system has an internal flash chip which is a 8 MiB soldered SOIC-8 chip.
This chip is located on the top middle side of the board. It's located
between SoC and Q7 connector. Use clip (or solder wires) to program
the chip.
Specifically, it's a Winbond W25Q64FW (1.8V), whose datasheet can be found
[here][W25Q64FW].
## Known issues
- The PQ7 module contains Q7 connector only. Depending on the carrier
serial/video/pcie ports might be available.
## Untested
- hardware monitor
- SDIO
- Full Embedded Controller support
## Working (using carrier)
- USB
- Gigabit Ethernet
- integrated graphics
- flashrom
- external graphics
- PCIe
- eMMC
- SATA
- serial port
mb/portwell/m107: Add Kingston memory support Add support for board revision 1.3 containing Kingston memory. BUG=N/A TEST=tested on portwell m107 module Change-Id: I436698ee079952580c764e840ee0ad2e18ea8d3b Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36502 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-10-31 10:13:17 +01:00
- SMBus
mainboard/portwell/m107: Do initial mainboard commit Initial support for Portwell PQ7-M107 (Q7) module. Code based on Intel Strago mainboard. BUG=N/A TEST=booting SeaBIOS and Linux 4.20 kernel on PQ7-M107 Change-Id: I7d3173fdcf881f894a75cd9798ba173b425d4e62 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29470 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-15 08:48:55 +02:00
- HDA (codec on carrier)
- initialization with FSP MR2
- SeaBIOS payload (version rel-1.11.0-44-g7961917)
- Embedded Linux (Ubuntu 4.15+)
## Technology
```eval_rst
+------------------+--------------------------------------------------+
| SoC | Intel Atom Processor N3710 |
+------------------+--------------------------------------------------+
| CPU | Intel Braswell (N3710) |
+------------------+--------------------------------------------------+
| Super I/O, EC | ITE8256 |
+------------------+--------------------------------------------------+
| Coprocessor | Intel Management Engine |
+------------------+--------------------------------------------------+
```
[Portwell PQ7-M107]: http://portwell.com/products/detail.php?CUSTCHAR1=PQ7-M107
[W25Q64FW]: https://www.winbond.com/resource-files/w25q64fw%20revn%2005182017%20sfdp.pdf
[flashrom]: https://flashrom.org/Flashrom
[Board manual]: www.portwell.com/pdf/embedded/PQ7-M107.pdf