coreboot-kgpe-d16/payloads/libpayload/gdb/stub.c

125 lines
2.9 KiB
C
Raw Normal View History

libpayload: Add remote GDB support This patch adds the ability to attach a GDB host through the UART to a running payload. Libpayload implements a small stub that can parse and respond to the GDB remote protocol and provide the required primitives (reading/writing registers/memory, etc.) to allow GDB to control execution. The goal of this implementation is to be as small and uninvasive as possible. It implements only the minimum amount of primitives required, and relies on GDB's impressive workaround capabilities (such as emulating breakpoints by temporarily replacing instructions) for the more complicated features. This way, a relatively tiny amount of code on the firmware side opens a vast range of capabilities to the user, not just in debugging but also in remote-controlling the firmware to change its behavior (e.g. through GDBs ability to modify variables and call functions). By default, a system with the REMOTEGDB Kconfig will only trap into GDB when executing halt() (including the calls from die_if(), assert(), and exception handlers). In addition, payloads can manually call gdb_enter() if desired. It will print a final "Ready for GDB connection." on the serial, detach the normal serial output driver and wait for the commands that GDB starts sending on attach. Based on original implementation by Gabe Black <gabeblack@chromium.org>. BUG=chrome-os-partner:18390 TEST=Boot a GDB enabled image in recovery mode (or get it to hit a halt()), close your terminal, execute '<toolchain>-gdb --symbols /build/<board>/firmware/depthcharge_gdb/depthcharge.elf --directory ~/trunk/src/third_party/coreboot/payloads/libpayload --directory ~/trunk/src/platform/depthcharge --directory ~/trunk/src/platform/vboot_reference --ex "target remote <cpu_uart_pty>"' and behold the magic. (You can also SIGSTOP your terminal's parent shell and the terminal itself, and SIGCONT them in reverse order after GDB exits. More convenient wrapper tools to do all this automatically coming soon.) Original-Change-Id: Ib440d1804126cdfdac4a8801f5015b4487e25269 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/202563 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 9c4a642c7be2faf122fef39bdfaddd64aec68b77) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I9238b4eb19d3ab2c98e4e1c5946cd7d252ca3c3b Reviewed-on: http://review.coreboot.org/8119 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-05-15 20:57:38 +02:00
/*
* Copyright 2014 Google Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but without any warranty; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <gdb.h>
#include <libpayload.h>
struct gdb_state gdb_state;
static u8 reply_buf[2048];
static u8 command_buf[2048];
static struct gdb_message command = {
.buf = command_buf,
.used = 0,
.size = sizeof(command_buf),
};
static struct gdb_message reply = {
.buf = reply_buf,
.used = 0,
.size = sizeof(reply_buf),
};
void gdb_command_loop(u8 signal)
{
if (gdb_state.resumed) {
/* We were just running. Send a stop reply. */
reply.used = 0;
gdb_message_add_string(&reply, "S");
gdb_message_encode_bytes(&reply, &signal, 1);
gdb_send_reply(&reply);
}
gdb_state.signal = signal;
gdb_state.resumed = 0;
gdb_state.connected = 1;
while (1) {
int i;
gdb_get_command(&command);
reply.used = 0;
for (i = 0; i < gdb_command_count; i++) {
int clen = strlen(gdb_commands[i].str);
if (!strncmp(gdb_commands[i].str, (char *)command.buf,
MIN(clen, command.used))) {
gdb_commands[i].handler(&command, clen, &reply);
break;
}
}
/* If we're resuming, we won't send a reply until we stop. */
if (gdb_state.resumed)
return;
gdb_send_reply(&reply);
}
}
static void gdb_output_write(const void *buffer, size_t count)
{
if (!gdb_state.resumed) {
/* Must be a die_if() in GDB (or a bug), so bail out and die. */
gdb_exit(-1);
video_console_init();
puts("GDB died, redirecting its last words to the screen:\n");
console_write(buffer, count);
} else {
reply.used = 0;
reply.buf[reply.used++] = 'O';
gdb_message_encode_bytes(&reply, buffer, count);
gdb_send_reply(&reply);
}
}
static struct console_output_driver gdb_output_driver = {
.write = &gdb_output_write
};
static void gdb_init(void)
{
printf("Ready for GDB connection.\n");
gdb_transport_init();
gdb_arch_init();
console_add_output_driver(&gdb_output_driver);
}
void gdb_enter(void)
{
if (!gdb_state.connected)
gdb_init();
gdb_arch_enter();
}
void gdb_exit(s8 exit_status)
{
if (!gdb_state.connected)
return;
reply.used = 0;
gdb_message_add_string(&reply, "W");
gdb_message_encode_bytes(&reply, &exit_status, 1);
gdb_send_reply(&reply);
console_remove_output_driver(&gdb_output_write);
gdb_transport_teardown();
gdb_state.connected = 0;
printf("Detached from GDB connection.\n");
}