GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
coreboot-kgpe-d16/util/sconfig/sconfig.tab.h_shipped

127 lines
4.8 KiB
Plaintext
Raw Normal View History

device + util/sconfig: introduce new device `gpio` Introduce a new device `gpio` that is going to be used for generic abstraction of gpio operations in the devicetree. The general idea behind this is that every chip can have gpios that shall be accessible in a very generic way by any driver through the devicetree. The chip that implements the chip-specific gpio operations has to assign them to the generic device operations struct, which then gets assigned to the gpio device during device probing. See CB:48583 for how this gets done for the SoCs using intelblocks/gpio. The gpio device then can be added to the devicetree with an alias name like in the following example: chip soc/whateverlake device gpio 0 alias soc_gpio on end ... end Any driver that requires access to this gpio device needs to have a device pointer (or multiple) and an option for specifying the gpio to be used in its chip config like this: struct drivers_ipmi_config { ... DEVTREE_CONST struct device *gpio_dev; u16 post_complete_gpio; ... }; The device `soc_gpio` can then be linked to the chip driver's `gpio_dev` above by using the syntax `use ... as ...`, which was introduced in commit 8e1ea52: chip drivers/ipmi use soc_gpio as gpio_dev register "bmc_jumper_gpio" = "GPP_D22" ... end The IPMI driver can then use the generic gpio operations without any knowlege of the chip's specifics: unsigned int gpio_val; const struct gpio_operations *gpio_ops; gpio_ops = dev_get_gpio_ops(conf->gpio_dev); gpio_val = gpio_ops->get(conf->bmc_jumper_gpio); For a full example have a look at CB:48096 and CB:48095. This change adds the new device type to sconfig and adds generic gpio operations to the `device_operations` struct. Also, a helper for getting the gpio operations from a device after checking them for NULL pointers gets added. Successfully tested on Supermicro X11SSM-F with CB:48097, X11SSH-TF with CB:48711 and OCP DeltaLake with CB:48672. Change-Id: Ic4572ad8b37bd1afd2fb213b2c67fb8aec536786 Tested-by: Johnny Lin <Johnny_Lin@wiwynn.com> Tested-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: Patrick Rudolph <siro@das-labor.org> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-12-11 21:26:02 +01:00
/* A Bison parser, made by GNU Bison 3.7.2. */
Replace sconfig with a C implementation. (smaller, faster, standard parser generator, no more python) Provide precompiled parser, so bison and flex are optional dependencies. Adapt Makefile and abuild (which uses some sconfig file as a magic path) to match. Drop python as dependency from README, and add bison and flex as optional dependencies Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5373 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-08 13:37:43 +02:00
MPTAPLE: generate from devicetree.cb This patch adds support for autogenerating the MPTABLE from devicetree.cb. This is done by a write_smp_table() declared weak in mpspec.c. If the mainboard doesn't provide it's own function, this generic implementation is called. Syntax in devicetree.cb: ioapic_irq <APICID> <INTA|INTB|INTC|INTD> <INTPIN> The ioapic_irq directive can be used in pci and pci_domain devices. If there's no directive, the autogen code traverses the tree back to the pci_domain and stops at the first device which such a directive, and use that information to generate the entry according to PCI IRQ routing rules. Change-Id: I4df5b198e8430f939d477c14c798414e398a2027 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1138 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-06-21 22:19:48 +02:00
/* Bison interface for Yacc-like parsers in C
util/sconfig: Fix warnings and re-generate _shipped files Change-Id: I7a18824d64d3f6212e8566695376bf97e2196ee2 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14733 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-05-07 10:11:14 +02:00
sconfig: Allow `register` entries below devices, too Every device belongs to a chip. And we already keep that relation by inheriting the `.chip_info` pointer if downstream devices don't have another chip specified. So we can also allow to specify `register` settings at the device level. Change-Id: I44e6b95d0cd708fef69b152ebc46b869b2bb9205 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40803 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-28 16:28:03 +02:00
Copyright (C) 1984, 1989-1990, 2000-2015, 2018-2020 Free Software Foundation,
Inc.
util/sconfig: Fix warnings and re-generate _shipped files Change-Id: I7a18824d64d3f6212e8566695376bf97e2196ee2 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14733 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-05-07 10:11:14 +02:00
Replace sconfig with a C implementation. (smaller, faster, standard parser generator, no more python) Provide precompiled parser, so bison and flex are optional dependencies. Adapt Makefile and abuild (which uses some sconfig file as a magic path) to match. Drop python as dependency from README, and add bison and flex as optional dependencies Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5373 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-08 13:37:43 +02:00
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
util/sconfig: Fix warnings and re-generate _shipped files Change-Id: I7a18824d64d3f6212e8566695376bf97e2196ee2 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14733 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-05-07 10:11:14 +02:00
Replace sconfig with a C implementation. (smaller, faster, standard parser generator, no more python) Provide precompiled parser, so bison and flex are optional dependencies. Adapt Makefile and abuild (which uses some sconfig file as a magic path) to match. Drop python as dependency from README, and add bison and flex as optional dependencies Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5373 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-08 13:37:43 +02:00
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
util/sconfig: Fix warnings and re-generate _shipped files Change-Id: I7a18824d64d3f6212e8566695376bf97e2196ee2 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14733 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-05-07 10:11:14 +02:00
Replace sconfig with a C implementation. (smaller, faster, standard parser generator, no more python) Provide precompiled parser, so bison and flex are optional dependencies. Adapt Makefile and abuild (which uses some sconfig file as a magic path) to match. Drop python as dependency from README, and add bison and flex as optional dependencies Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5373 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-08 13:37:43 +02:00
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
/* As a special exception, you may create a larger work that contains
part or all of the Bison parser skeleton and distribute that work
under terms of your choice, so long as that work isn't itself a
parser generator using the skeleton or a modified version thereof
as a parser skeleton. Alternatively, if you modify or redistribute
the parser skeleton itself, you may (at your option) remove this
special exception, which will cause the skeleton and the resulting
Bison output files to be licensed under the GNU General Public
License without this special exception.
util/sconfig: Fix warnings and re-generate _shipped files Change-Id: I7a18824d64d3f6212e8566695376bf97e2196ee2 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14733 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-05-07 10:11:14 +02:00
Replace sconfig with a C implementation. (smaller, faster, standard parser generator, no more python) Provide precompiled parser, so bison and flex are optional dependencies. Adapt Makefile and abuild (which uses some sconfig file as a magic path) to match. Drop python as dependency from README, and add bison and flex as optional dependencies Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5373 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-08 13:37:43 +02:00
This special exception was added by the Free Software Foundation in
version 2.2 of Bison. */
sconfig: Allow chipset to provide a base devicetree This change extends the devicetree override one more layer and allows the chipset to provide the base devicetree. This allows the chipset to assign alias names to devices as well as set default register values. This works for both the baseboard devicetree.cb as well as variant overridetree.cb. chipset.cb: device pci 15.0 alias i2c0 off end devicetree.cb: device ref i2c0 on end BUG=b:156957424 Change-Id: Ia7500a62f6211243b519424ef3834b9e7615e2fd Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44037 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-30 01:28:43 +02:00
/* DO NOT RELY ON FEATURES THAT ARE NOT DOCUMENTED in the manual,
especially those whose name start with YY_ or yy_. They are
private implementation details that can be changed or removed. */
sconfig: Allow `register` entries below devices, too Every device belongs to a chip. And we already keep that relation by inheriting the `.chip_info` pointer if downstream devices don't have another chip specified. So we can also allow to specify `register` settings at the device level. Change-Id: I44e6b95d0cd708fef69b152ebc46b869b2bb9205 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40803 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-28 16:28:03 +02:00
device + util/sconfig: introduce new device `gpio` Introduce a new device `gpio` that is going to be used for generic abstraction of gpio operations in the devicetree. The general idea behind this is that every chip can have gpios that shall be accessible in a very generic way by any driver through the devicetree. The chip that implements the chip-specific gpio operations has to assign them to the generic device operations struct, which then gets assigned to the gpio device during device probing. See CB:48583 for how this gets done for the SoCs using intelblocks/gpio. The gpio device then can be added to the devicetree with an alias name like in the following example: chip soc/whateverlake device gpio 0 alias soc_gpio on end ... end Any driver that requires access to this gpio device needs to have a device pointer (or multiple) and an option for specifying the gpio to be used in its chip config like this: struct drivers_ipmi_config { ... DEVTREE_CONST struct device *gpio_dev; u16 post_complete_gpio; ... }; The device `soc_gpio` can then be linked to the chip driver's `gpio_dev` above by using the syntax `use ... as ...`, which was introduced in commit 8e1ea52: chip drivers/ipmi use soc_gpio as gpio_dev register "bmc_jumper_gpio" = "GPP_D22" ... end The IPMI driver can then use the generic gpio operations without any knowlege of the chip's specifics: unsigned int gpio_val; const struct gpio_operations *gpio_ops; gpio_ops = dev_get_gpio_ops(conf->gpio_dev); gpio_val = gpio_ops->get(conf->bmc_jumper_gpio); For a full example have a look at CB:48096 and CB:48095. This change adds the new device type to sconfig and adds generic gpio operations to the `device_operations` struct. Also, a helper for getting the gpio operations from a device after checking them for NULL pointers gets added. Successfully tested on Supermicro X11SSM-F with CB:48097, X11SSH-TF with CB:48711 and OCP DeltaLake with CB:48672. Change-Id: Ic4572ad8b37bd1afd2fb213b2c67fb8aec536786 Tested-by: Johnny Lin <Johnny_Lin@wiwynn.com> Tested-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: Patrick Rudolph <siro@das-labor.org> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-12-11 21:26:02 +01:00
#ifndef YY_YY_HOME_C0D3_SRC_COREBOOT_GIT_UTIL_SCONFIG_SCONFIG_TAB_H_SHIPPED_INCLUDED
# define YY_YY_HOME_C0D3_SRC_COREBOOT_GIT_UTIL_SCONFIG_SCONFIG_TAB_H_SHIPPED_INCLUDED
util/sconfig: Fix warnings and re-generate _shipped files Change-Id: I7a18824d64d3f6212e8566695376bf97e2196ee2 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14733 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-05-07 10:11:14 +02:00
/* Debug traces. */
#ifndef YYDEBUG
# define YYDEBUG 0
#endif
#if YYDEBUG
extern int yydebug;
#endif
Replace sconfig with a C implementation. (smaller, faster, standard parser generator, no more python) Provide precompiled parser, so bison and flex are optional dependencies. Adapt Makefile and abuild (which uses some sconfig file as a magic path) to match. Drop python as dependency from README, and add bison and flex as optional dependencies Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5373 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-08 13:37:43 +02:00
sconfig: Allow chipset to provide a base devicetree This change extends the devicetree override one more layer and allows the chipset to provide the base devicetree. This allows the chipset to assign alias names to devices as well as set default register values. This works for both the baseboard devicetree.cb as well as variant overridetree.cb. chipset.cb: device pci 15.0 alias i2c0 off end devicetree.cb: device ref i2c0 on end BUG=b:156957424 Change-Id: Ia7500a62f6211243b519424ef3834b9e7615e2fd Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44037 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-30 01:28:43 +02:00
/* Token kinds. */
Replace sconfig with a C implementation. (smaller, faster, standard parser generator, no more python) Provide precompiled parser, so bison and flex are optional dependencies. Adapt Makefile and abuild (which uses some sconfig file as a magic path) to match. Drop python as dependency from README, and add bison and flex as optional dependencies Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5373 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-08 13:37:43 +02:00
#ifndef YYTOKENTYPE
# define YYTOKENTYPE
util/sconfig: Fix warnings and re-generate _shipped files Change-Id: I7a18824d64d3f6212e8566695376bf97e2196ee2 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14733 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-05-07 10:11:14 +02:00
enum yytokentype
{
sconfig: Allow chipset to provide a base devicetree This change extends the devicetree override one more layer and allows the chipset to provide the base devicetree. This allows the chipset to assign alias names to devices as well as set default register values. This works for both the baseboard devicetree.cb as well as variant overridetree.cb. chipset.cb: device pci 15.0 alias i2c0 off end devicetree.cb: device ref i2c0 on end BUG=b:156957424 Change-Id: Ia7500a62f6211243b519424ef3834b9e7615e2fd Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44037 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-30 01:28:43 +02:00
YYEMPTY = -2,
YYEOF = 0, /* "end of file" */
YYerror = 256, /* error */
YYUNDEF = 257, /* "invalid token" */
CHIP = 258, /* CHIP */
DEVICE = 259, /* DEVICE */
REGISTER = 260, /* REGISTER */
ALIAS = 261, /* ALIAS */
REFERENCE = 262, /* REFERENCE */
ASSOCIATION = 263, /* ASSOCIATION */
BOOL = 264, /* BOOL */
STATUS = 265, /* STATUS */
MANDATORY = 266, /* MANDATORY */
BUS = 267, /* BUS */
RESOURCE = 268, /* RESOURCE */
END = 269, /* END */
EQUALS = 270, /* EQUALS */
HEX = 271, /* HEX */
STRING = 272, /* STRING */
PCI = 273, /* PCI */
PNP = 274, /* PNP */
I2C = 275, /* I2C */
APIC = 276, /* APIC */
CPU_CLUSTER = 277, /* CPU_CLUSTER */
CPU = 278, /* CPU */
DOMAIN = 279, /* DOMAIN */
IRQ = 280, /* IRQ */
DRQ = 281, /* DRQ */
SLOT_DESC = 282, /* SLOT_DESC */
IO = 283, /* IO */
NUMBER = 284, /* NUMBER */
SUBSYSTEMID = 285, /* SUBSYSTEMID */
INHERIT = 286, /* INHERIT */
IOAPIC_IRQ = 287, /* IOAPIC_IRQ */
IOAPIC = 288, /* IOAPIC */
PCIINT = 289, /* PCIINT */
GENERIC = 290, /* GENERIC */
SPI = 291, /* SPI */
USB = 292, /* USB */
MMIO = 293, /* MMIO */
LPC = 294, /* LPC */
ESPI = 295, /* ESPI */
device + util/sconfig: introduce new device `gpio` Introduce a new device `gpio` that is going to be used for generic abstraction of gpio operations in the devicetree. The general idea behind this is that every chip can have gpios that shall be accessible in a very generic way by any driver through the devicetree. The chip that implements the chip-specific gpio operations has to assign them to the generic device operations struct, which then gets assigned to the gpio device during device probing. See CB:48583 for how this gets done for the SoCs using intelblocks/gpio. The gpio device then can be added to the devicetree with an alias name like in the following example: chip soc/whateverlake device gpio 0 alias soc_gpio on end ... end Any driver that requires access to this gpio device needs to have a device pointer (or multiple) and an option for specifying the gpio to be used in its chip config like this: struct drivers_ipmi_config { ... DEVTREE_CONST struct device *gpio_dev; u16 post_complete_gpio; ... }; The device `soc_gpio` can then be linked to the chip driver's `gpio_dev` above by using the syntax `use ... as ...`, which was introduced in commit 8e1ea52: chip drivers/ipmi use soc_gpio as gpio_dev register "bmc_jumper_gpio" = "GPP_D22" ... end The IPMI driver can then use the generic gpio operations without any knowlege of the chip's specifics: unsigned int gpio_val; const struct gpio_operations *gpio_ops; gpio_ops = dev_get_gpio_ops(conf->gpio_dev); gpio_val = gpio_ops->get(conf->bmc_jumper_gpio); For a full example have a look at CB:48096 and CB:48095. This change adds the new device type to sconfig and adds generic gpio operations to the `device_operations` struct. Also, a helper for getting the gpio operations from a device after checking them for NULL pointers gets added. Successfully tested on Supermicro X11SSM-F with CB:48097, X11SSH-TF with CB:48711 and OCP DeltaLake with CB:48672. Change-Id: Ic4572ad8b37bd1afd2fb213b2c67fb8aec536786 Tested-by: Johnny Lin <Johnny_Lin@wiwynn.com> Tested-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: Patrick Rudolph <siro@das-labor.org> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-12-11 21:26:02 +01:00
GPIO = 296, /* GPIO */
FW_CONFIG_TABLE = 297, /* FW_CONFIG_TABLE */
FW_CONFIG_FIELD = 298, /* FW_CONFIG_FIELD */
FW_CONFIG_OPTION = 299, /* FW_CONFIG_OPTION */
FW_CONFIG_PROBE = 300 /* FW_CONFIG_PROBE */
util/sconfig: Fix warnings and re-generate _shipped files Change-Id: I7a18824d64d3f6212e8566695376bf97e2196ee2 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14733 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-05-07 10:11:14 +02:00
};
sconfig: Allow chipset to provide a base devicetree This change extends the devicetree override one more layer and allows the chipset to provide the base devicetree. This allows the chipset to assign alias names to devices as well as set default register values. This works for both the baseboard devicetree.cb as well as variant overridetree.cb. chipset.cb: device pci 15.0 alias i2c0 off end devicetree.cb: device ref i2c0 on end BUG=b:156957424 Change-Id: Ia7500a62f6211243b519424ef3834b9e7615e2fd Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44037 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-30 01:28:43 +02:00
typedef enum yytokentype yytoken_kind_t;
Replace sconfig with a C implementation. (smaller, faster, standard parser generator, no more python) Provide precompiled parser, so bison and flex are optional dependencies. Adapt Makefile and abuild (which uses some sconfig file as a magic path) to match. Drop python as dependency from README, and add bison and flex as optional dependencies Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5373 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-08 13:37:43 +02:00
#endif
util/sconfig: Fix warnings and re-generate _shipped files Change-Id: I7a18824d64d3f6212e8566695376bf97e2196ee2 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14733 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-05-07 10:11:14 +02:00
/* Value type. */
Replace sconfig with a C implementation. (smaller, faster, standard parser generator, no more python) Provide precompiled parser, so bison and flex are optional dependencies. Adapt Makefile and abuild (which uses some sconfig file as a magic path) to match. Drop python as dependency from README, and add bison and flex as optional dependencies Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5373 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-08 13:37:43 +02:00
#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED
util/sconfig: Fix warnings and re-generate _shipped files Change-Id: I7a18824d64d3f6212e8566695376bf97e2196ee2 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14733 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-05-07 10:11:14 +02:00
union YYSTYPE
Replace sconfig with a C implementation. (smaller, faster, standard parser generator, no more python) Provide precompiled parser, so bison and flex are optional dependencies. Adapt Makefile and abuild (which uses some sconfig file as a magic path) to match. Drop python as dependency from README, and add bison and flex as optional dependencies Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5373 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-08 13:37:43 +02:00
{
util/sconfig: Re-factor device structure in parse tree This change re-factors the device structure in parse tree to be able to support multidev devices just like non-multidev devices. With this change, every device has a bus under it which is the parent of all devices that fall on the bus. If there are duplicate entries in the devicetree, then there will be multiple buses under the device and each bus will have its own set of children. The tree starts out with a root device which has a root bus under it. This is a special device which is created statically and its parent is its own root bus. When parsing the device tree file, devices get added under the root bus as children. Since this change re-organizes the way devicetree is represented, it gets rid of latestchild and next_sibling pointers from struct device. Also, the tree traversal to generate static.c is changed to breadth-first walk instead of using the next_sibling. BUG=b:80081934 TEST=Verified using abuild that all boards compile successfully. Change-Id: Ic8c8a73a247e8e992ab6b1b2cc3131e06fa2e5a1 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/26800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-03 13:22:17 +02:00
struct device *dev;
util/sconfig: Get rid of struct header Now that chips and devices are treated differently in sconfig, this change gets rid of struct header and add_header function which were responsible for maintaining list of headers that need to be added to static.c. Instead, struct chip is re-factored into struct chip and struct chip_instance, where chip is a list of unique chips required by the mainboard whereas chip_instance is an instance of the chip. One chip can have multiple instances dependending upon the devices in the system. Also, struct device is updated to hold a pointer to chip instance instead of the chip structure. This unique list of chips is then used to add appropriate headers to static.c BUG=b:80081934 TEST=Verified using abuild that all boards compile successfully. Change-Id: I6fccdf7c361b4f55a831195adcda9b21932755aa Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/26739 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-31 19:33:16 +02:00
struct chip_instance *chip_instance;
Replace sconfig with a C implementation. (smaller, faster, standard parser generator, no more python) Provide precompiled parser, so bison and flex are optional dependencies. Adapt Makefile and abuild (which uses some sconfig file as a magic path) to match. Drop python as dependency from README, and add bison and flex as optional dependencies Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5373 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-08 13:37:43 +02:00
char *string;
device + util/sconfig: introduce new device `gpio` Introduce a new device `gpio` that is going to be used for generic abstraction of gpio operations in the devicetree. The general idea behind this is that every chip can have gpios that shall be accessible in a very generic way by any driver through the devicetree. The chip that implements the chip-specific gpio operations has to assign them to the generic device operations struct, which then gets assigned to the gpio device during device probing. See CB:48583 for how this gets done for the SoCs using intelblocks/gpio. The gpio device then can be added to the devicetree with an alias name like in the following example: chip soc/whateverlake device gpio 0 alias soc_gpio on end ... end Any driver that requires access to this gpio device needs to have a device pointer (or multiple) and an option for specifying the gpio to be used in its chip config like this: struct drivers_ipmi_config { ... DEVTREE_CONST struct device *gpio_dev; u16 post_complete_gpio; ... }; The device `soc_gpio` can then be linked to the chip driver's `gpio_dev` above by using the syntax `use ... as ...`, which was introduced in commit 8e1ea52: chip drivers/ipmi use soc_gpio as gpio_dev register "bmc_jumper_gpio" = "GPP_D22" ... end The IPMI driver can then use the generic gpio operations without any knowlege of the chip's specifics: unsigned int gpio_val; const struct gpio_operations *gpio_ops; gpio_ops = dev_get_gpio_ops(conf->gpio_dev); gpio_val = gpio_ops->get(conf->bmc_jumper_gpio); For a full example have a look at CB:48096 and CB:48095. This change adds the new device type to sconfig and adds generic gpio operations to the `device_operations` struct. Also, a helper for getting the gpio operations from a device after checking them for NULL pointers gets added. Successfully tested on Supermicro X11SSM-F with CB:48097, X11SSH-TF with CB:48711 and OCP DeltaLake with CB:48672. Change-Id: Ic4572ad8b37bd1afd2fb213b2c67fb8aec536786 Tested-by: Johnny Lin <Johnny_Lin@wiwynn.com> Tested-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: Patrick Rudolph <siro@das-labor.org> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-12-11 21:26:02 +01:00
uint64_t number;
Replace sconfig with a C implementation. (smaller, faster, standard parser generator, no more python) Provide precompiled parser, so bison and flex are optional dependencies. Adapt Makefile and abuild (which uses some sconfig file as a magic path) to match. Drop python as dependency from README, and add bison and flex as optional dependencies Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5373 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-08 13:37:43 +02:00
util/sconfig: Fix warnings and re-generate _shipped files Change-Id: I7a18824d64d3f6212e8566695376bf97e2196ee2 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14733 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-05-07 10:11:14 +02:00
};
typedef union YYSTYPE YYSTYPE;
Replace sconfig with a C implementation. (smaller, faster, standard parser generator, no more python) Provide precompiled parser, so bison and flex are optional dependencies. Adapt Makefile and abuild (which uses some sconfig file as a magic path) to match. Drop python as dependency from README, and add bison and flex as optional dependencies Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5373 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-08 13:37:43 +02:00
# define YYSTYPE_IS_TRIVIAL 1
# define YYSTYPE_IS_DECLARED 1
#endif
util/sconfig: Fix warnings and re-generate _shipped files Change-Id: I7a18824d64d3f6212e8566695376bf97e2196ee2 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14733 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-05-07 10:11:14 +02:00
Replace sconfig with a C implementation. (smaller, faster, standard parser generator, no more python) Provide precompiled parser, so bison and flex are optional dependencies. Adapt Makefile and abuild (which uses some sconfig file as a magic path) to match. Drop python as dependency from README, and add bison and flex as optional dependencies Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5373 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-08 13:37:43 +02:00
extern YYSTYPE yylval;
util/sconfig: Fix warnings and re-generate _shipped files Change-Id: I7a18824d64d3f6212e8566695376bf97e2196ee2 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14733 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-05-07 10:11:14 +02:00
int yyparse (void);
device + util/sconfig: introduce new device `gpio` Introduce a new device `gpio` that is going to be used for generic abstraction of gpio operations in the devicetree. The general idea behind this is that every chip can have gpios that shall be accessible in a very generic way by any driver through the devicetree. The chip that implements the chip-specific gpio operations has to assign them to the generic device operations struct, which then gets assigned to the gpio device during device probing. See CB:48583 for how this gets done for the SoCs using intelblocks/gpio. The gpio device then can be added to the devicetree with an alias name like in the following example: chip soc/whateverlake device gpio 0 alias soc_gpio on end ... end Any driver that requires access to this gpio device needs to have a device pointer (or multiple) and an option for specifying the gpio to be used in its chip config like this: struct drivers_ipmi_config { ... DEVTREE_CONST struct device *gpio_dev; u16 post_complete_gpio; ... }; The device `soc_gpio` can then be linked to the chip driver's `gpio_dev` above by using the syntax `use ... as ...`, which was introduced in commit 8e1ea52: chip drivers/ipmi use soc_gpio as gpio_dev register "bmc_jumper_gpio" = "GPP_D22" ... end The IPMI driver can then use the generic gpio operations without any knowlege of the chip's specifics: unsigned int gpio_val; const struct gpio_operations *gpio_ops; gpio_ops = dev_get_gpio_ops(conf->gpio_dev); gpio_val = gpio_ops->get(conf->bmc_jumper_gpio); For a full example have a look at CB:48096 and CB:48095. This change adds the new device type to sconfig and adds generic gpio operations to the `device_operations` struct. Also, a helper for getting the gpio operations from a device after checking them for NULL pointers gets added. Successfully tested on Supermicro X11SSM-F with CB:48097, X11SSH-TF with CB:48711 and OCP DeltaLake with CB:48672. Change-Id: Ic4572ad8b37bd1afd2fb213b2c67fb8aec536786 Tested-by: Johnny Lin <Johnny_Lin@wiwynn.com> Tested-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: Patrick Rudolph <siro@das-labor.org> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-12-11 21:26:02 +01:00
#endif /* !YY_YY_HOME_C0D3_SRC_COREBOOT_GIT_UTIL_SCONFIG_SCONFIG_TAB_H_SHIPPED_INCLUDED */