coreboot-kgpe-d16/src/ec/lenovo/pmh7/Makefile.inc

ramstage-y += pmh7.c
smm-$(CONFIG_HAVE_SMI_HANDLER) += pmh7.c
romstage-y += pmh7.c
Get rid of drivers class The use of ramstage.a required the build system to handle some object files in a special way, which were put in the drivers class. These object files didn't provide any symbols that were used directly (but only via linker magic), and so the linker never considered them for inclusion. With ramstage.a gone, we can drop this special class, too. Change-Id: I6f1369e08d7d12266b506a5597c3a139c5c41a55 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1872 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> 2012-11-16 14:50:32 +01:00			`ramstage-y += pmh7.c`
T60: Add support for Ultrabay Legacy I/O devices (40Y8122) Those modules have basically the same Super I/O capabilities as the Docking station. Unfortunately, the Super I/O in the module shares the same I/O address as the Docking station, so we're not allowed to connect the LPC Docking Bus if such a module is present. To be able to detect this device and use it as early console for coreboot, we have to initialize the GPIO Controller before, as this device is detected via GPIO06. Change-Id: If7c38bb6797f76cf28f09f3614ab9a33878571fb Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/282 Tested-by: build bot (Jenkins) 2011-10-15 17:31:01 +02:00			`smm-$(CONFIG_HAVE_SMI_HANDLER) += pmh7.c`
			`romstage-y += pmh7.c`