GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
coreboot-kgpe-d16/Documentation/mainboard/supermicro/x11-lga1151-series/x11ssm-f/x11ssm-f.md

93 lines
4.0 KiB
Markdown
Raw Normal View History

mb/supermicro/x11-lga1151-series: add x11ssm-f board This adds another x11 series board, the X11SSM-F, which is similiar to X11SSH-TF but differs in PCIe interfaces/devices, GPIO settings and Ethernet interfaces. Change-Id: I24e6f0f41a844652f88b562285b26beef311a2c9 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35427 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Michael Niewöhner
2019-09-19 09:22:04 +02:00
# Supermicro X11SSM-F
This section details how to run coreboot on the [Supermicro X11SSM-F].
## Flashing coreboot
docs/mb/supermicro/x11ssm-f: Update board documentation - Drop vanished issue on PCIe warning - Drop TODO section, since the TODOs are done - Document the jumper J6, that was not documented by the vendor. Its function has been determined by dissecting a dead board. - The flash is not socketed anymore. Drop that note and compress the whole paragraph. Also add a note about flashing via the BMC web interface. Change-Id: I2b5a08a6b6d80717621d6a30f31829fe4b84891a Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-11-26 19:43:08 +01:00
The board can be flashed externally. FTDI FT2232H and FT232H based programmers worked. For this,
one needs to add a diode between VCC and the flash chip. The flash IC [MX25L12873F] can be found
near PCH PCIe Slot 4.
mb/supermicro/x11-lga1151-series: add x11ssm-f board This adds another x11 series board, the X11SSM-F, which is similiar to X11SSH-TF but differs in PCIe interfaces/devices, GPIO settings and Ethernet interfaces. Change-Id: I24e6f0f41a844652f88b562285b26beef311a2c9 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35427 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Michael Niewöhner
2019-09-19 09:22:04 +02:00
docs/mb/supermicro/x11ssm-f: Update board documentation - Drop vanished issue on PCIe warning - Drop TODO section, since the TODOs are done - Document the jumper J6, that was not documented by the vendor. Its function has been determined by dissecting a dead board. - The flash is not socketed anymore. Drop that note and compress the whole paragraph. Also add a note about flashing via the BMC web interface. Change-Id: I2b5a08a6b6d80717621d6a30f31829fe4b84891a Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-11-26 19:43:08 +01:00
Flashing is also possible through the BMC web interface, when a valid license was entered.
mb/supermicro/x11-lga1151-series: add x11ssm-f board This adds another x11 series board, the X11SSM-F, which is similiar to X11SSH-TF but differs in PCIe interfaces/devices, GPIO settings and Ethernet interfaces. Change-Id: I24e6f0f41a844652f88b562285b26beef311a2c9 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35427 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Michael Niewöhner
2019-09-19 09:22:04 +02:00
## BMC (IPMI)
This board has an ASPEED [AST2400], which has BMC/[IPMI] functionality. The BMC firmware resides in a
32 MiB SOIC-16 chip in the corner of the mainboard near the PCH PCIe Slot 4. This chip is a
[MX25L25635F].
docs/mb/supermicro/x11ssm-f: Update board documentation - Drop vanished issue on PCIe warning - Drop TODO section, since the TODOs are done - Document the jumper J6, that was not documented by the vendor. Its function has been determined by dissecting a dead board. - The flash is not socketed anymore. Drop that note and compress the whole paragraph. Also add a note about flashing via the BMC web interface. Change-Id: I2b5a08a6b6d80717621d6a30f31829fe4b84891a Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-11-26 19:43:08 +01:00
## Disabling LAN firmware
To disable the proprietary LAN firmware, the undocumented jumper J6 can be set to 2-3.
mb/supermicro/x11-lga1151-series: add x11ssm-f board This adds another x11 series board, the X11SSM-F, which is similiar to X11SSH-TF but differs in PCIe interfaces/devices, GPIO settings and Ethernet interfaces. Change-Id: I24e6f0f41a844652f88b562285b26beef311a2c9 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35427 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Michael Niewöhner
2019-09-19 09:22:04 +02:00
## Tested and working
- GRUB2 payload with Debian testing and kernel 5.2
- ECC ram (Linux' ie31200 driver works)
- USB ports
- Ethernet
- SATA ports
- RS232 external
- PCIe slots
- BMC (IPMI)
- VGA on Aspeed
- TPM on TPM expansion header
## Known issues
- See general issue section
- LNXTHERM missing
- S3 resume not working
## Technology
```eval_rst
+------------------+--------------------------------------------------+
| CPU | Intel Kaby Lake |
+------------------+--------------------------------------------------+
| PCH | Intel C236 |
+------------------+--------------------------------------------------+
| Coprocessor | Intel SPS (server version of the ME) |
+------------------+--------------------------------------------------+
| Super I/O | ASPEED AST2400 |
+------------------+--------------------------------------------------+
| Ethernet | 2x Intel I210-AT 1 GbE |
| | 1x dedicated BMC |
+------------------+--------------------------------------------------+
| PCIe slots | 1x 3.0 x8 |
| | 1x 3.0 x8 (in x16) |
| | 2x 3.0 x4 (in x8) |
+------------------+--------------------------------------------------+
| USB slots | 2x USB 2.0 (ext) |
| | 2x USB 3.0 (ext) |
| | 1x USB 3.0 (int) |
| | 1x dual USB 3.0 header |
| | 2x dual USB 2.0 header |
+------------------+--------------------------------------------------+
| SATA slots | 8x S-ATA III |
+------------------+--------------------------------------------------+
| Other slots | 1x RS232 (ext) |
| | 1x RS232 header |
| | 1x TPM header |
| | 1x Power SMB header |
| | 5x PWM Fan connector |
| | 2x I-SGPIO |
| | 2x S-ATA DOM Power connector |
| | 1x XDP Port |
| | 1x External BMC I2C Header (for IPMI card) |
| | 1x Chassis Intrusion Header |
+------------------+--------------------------------------------------+
```
## Extra links
- [Supermicro X11SSM-F]
- [Board manual]
[Supermicro X11SSM-F]: https://www.supermicro.com/en/products/motherboard/X11SSM-F
[Board manual]: https://www.supermicro.com/manuals/motherboard/C236/MNL-1785.pdf
[AST2400]: https://www.aspeedtech.com/products.php?fPath=20&rId=376
[IPMI]: ../../../../drivers/ipmi_kcs.md
[MX25L25635F]: https://media.digikey.com/pdf/Data%20Sheets/Macronix/MX25L25635F.pdf
[MX25L12873F]: https://media.digikey.com/pdf/Data%20Sheets/Macronix/MX25L12873F.pdf