coreboot-kgpe-d16/configs/config.prodrive_hermes

17 lines
546 B
Plaintext
Raw Normal View History

# Settings used by Prodrive to build coreboot for the Hermes
CONFIG_VENDOR_PRODRIVE=y
CONFIG_BOARD_PRODRIVE_HERMES=y
CONFIG_MAINBOARD_SMBIOS_MANUFACTURER="Prodrive Technologies B.V."
CONFIG_POST_IO=y
CONFIG_USE_LEGACY_8254_TIMER=y
CONFIG_HERMES_USES_SPS_FIRMWARE=y
CONFIG_GENERIC_LINEAR_FRAMEBUFFER=y
CONFIG_SMMSTORE=y
CONFIG_SMMSTORE_V2=y
CONFIG_DEFAULT_CONSOLE_LOGLEVEL_3=y
CONFIG_POST_DEVICE_LPC=y
CONFIG_MAINBOARD_SERIAL_NUMBER="N/A"
CONFIG_PCIEXP_SUPPORT_RESIZABLE_BARS=y
CONFIG_PCIEXP_DEFAULT_MAX_RESIZABLE_BAR_BITS=36
mb/prodrive/hermes: Allow using the Intel iGPU as primary Configure the Intel iGPU as primary video adapter if enabled according to EEPROM settings. The default is to use the ASPEED BMC as primary video adapter, which only has a VGA output and the remote KVM output. For now, use the FSP GOP driver to light up the iGPU. There are several issues with libgfxinit on the Hermes, probably due to the unusual setup of the iGPU's display outputs. They are routed to a mezzanine connector for a piggy-back sub-board, of which there are two models. The Poseidon piggy-back has two DisplayPort outputs and an HDMI output coming from a MegaChips LSPCON. The Avalanche piggy-back routes all three DisplayPort outputs from the iGPU into a FPGA, which acts as a DisplayPort sink. Note that the FSP GOP only initializes at most 2 iGPU display outputs. However, all three outputs function properly once OS (Windows, Linux) graphics drivers take over. Additionally, update the config file that Prodrive uses to build coreboot images so that the iGPU can be used as primary. TEST=Verify that the iGPU's outputs work properly in pre-OS, Windows and Linux, on both the Poseidon and Avalanche piggy-backs. Change-Id: I24d9ebc2055dc246e7f257aa2f3853b22c8af370 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62649 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-07 17:39:53 +01:00
CONFIG_RUN_FSP_GOP=y