coreboot-kgpe-d16/payloads/libpayload/bin/lpgcc

219 lines
5.8 KiB
Plaintext
Raw Normal View History

#!/bin/sh
##
## Copyright (C) 2008 Advanced Micro Devices, Inc.
##
## Redistribution and use in source and binary forms, with or without
## modification, are permitted provided that the following conditions
## are met:
## 1. Redistributions of source code must retain the above copyright
## notice, this list of conditions and the following disclaimer.
## 2. Redistributions in binary form must reproduce the above copyright
## notice, this list of conditions and the following disclaimer in the
## documentation and/or other materials provided with the distribution.
## 3. The name of the author may not be used to endorse or promote products
## derived from this software without specific prior written permission.
##
## THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
## ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
## IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
## ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
## FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
## DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
## OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
## HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
## LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
## OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
## SUCH DAMAGE.
# GCC wrapper for libpayload
if [ "${V}" = "1" ]; then
DEBUGME=1
else
DEBUGME=0
fi
if [ $DEBUGME -eq 1 ]; then
echo "CC = $CC"
fi
# let's not recurse.
# This is a hack, I know, but it makes sure that really simple user errors
# don't fork-bomb your machine.
if [ -n "$CC" ]; then
b=`basename "$CC"`
if [ "$b" = "lpgcc" ]; then
CC=""
fi
fi
if [ "$CC" != "" ]; then
DEFAULT_CC=$CC
else
DEFAULT_CC=gcc
fi
BASE=`dirname $0`
# This will set the _LIBDIR and _INCDIR variables used below
. $BASE/lp.functions
if [ $_LIBDIR != $_OBJ ]; then
_DOTCONFIG=$BASE/../libpayload.config
_XCOMPILE=$BASE/../libpayload.xcompile
else
_DOTCONFIG=$_OBJ/libpayload.config
_XCOMPILE=$_OBJ/xcompile
fi
# include libpayload config
if [ -f $_DOTCONFIG ]; then
. $_DOTCONFIG
else
echo "Can't find config"
exit 1
fi
ARM: Generalize armv7 as arm. There are ARM systems which are essentially heterogeneous multicores where some cores implement a different ARM architecture version than other cores. A specific example is the tegra124 which boots on an ARMv4 coprocessor while most code, including most of the firmware, runs on the main ARMv7 core. To support SOCs like this, the plan is to generalize the ARM architecture so that all versions are available, and an SOC/CPU can then select what architecture variant should be used for each component of the firmware; bootblock, romstage, and ramstage. Old-Change-Id: I22e048c3bc72bd56371e14200942e436c1e312c2 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/171338 Reviewed-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 8423a41529da0ff67fb9873be1e2beb30b09ae2d) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> ARM: Split out ARMv7 code and make it possible to have other arch versions. We don't always want to use ARMv7 code when building for ARM, so we should separate out the ARMv7 code so it can be excluded, and also make it possible to include code for some other version of the architecture instead, all per build component for cases where we need more than one architecture version at a time. The tegra124 bootblock will ultimately need to be ARMv4, but until we have some ARMv4 code to switch over to we can leave it set to ARMv7. Old-Change-Id: Ia982c91057fac9c252397b7c866224f103761cc7 Reviewed-on: https://chromium-review.googlesource.com/171400 Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 799514e6060aa97acdcf081b5c48f965be134483) Squashed two related patches for splitting ARM support into general ARM support and ARMv7 specific pieces. Change-Id: Ic6511507953a2223c87c55f90252c4a4e1dd6010 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6782 Tested-by: build bot (Jenkins)
2013-10-01 08:00:33 +02:00
if [ "$CONFIG_LP_ARCH_ARM" = "y" ]; then
_ARCHINCDIR=$_INCDIR/arm
_ARCHLIBDIR=$_LIBDIR/arm
_ARCHEXTRA=""
ARM: Generalize armv7 as arm. There are ARM systems which are essentially heterogeneous multicores where some cores implement a different ARM architecture version than other cores. A specific example is the tegra124 which boots on an ARMv4 coprocessor while most code, including most of the firmware, runs on the main ARMv7 core. To support SOCs like this, the plan is to generalize the ARM architecture so that all versions are available, and an SOC/CPU can then select what architecture variant should be used for each component of the firmware; bootblock, romstage, and ramstage. Old-Change-Id: I22e048c3bc72bd56371e14200942e436c1e312c2 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/171338 Reviewed-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 8423a41529da0ff67fb9873be1e2beb30b09ae2d) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> ARM: Split out ARMv7 code and make it possible to have other arch versions. We don't always want to use ARMv7 code when building for ARM, so we should separate out the ARMv7 code so it can be excluded, and also make it possible to include code for some other version of the architecture instead, all per build component for cases where we need more than one architecture version at a time. The tegra124 bootblock will ultimately need to be ARMv4, but until we have some ARMv4 code to switch over to we can leave it set to ARMv7. Old-Change-Id: Ia982c91057fac9c252397b7c866224f103761cc7 Reviewed-on: https://chromium-review.googlesource.com/171400 Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 799514e6060aa97acdcf081b5c48f965be134483) Squashed two related patches for splitting ARM support into general ARM support and ARMv7 specific pieces. Change-Id: Ic6511507953a2223c87c55f90252c4a4e1dd6010 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6782 Tested-by: build bot (Jenkins)
2013-10-01 08:00:33 +02:00
_ARCH=arm
fi
if [ "$CONFIG_LP_ARCH_ARM64" = "y" ]; then
_ARCHINCDIR=$_INCDIR/arm64
_ARCHLIBDIR=$_LIBDIR/arm64
_ARCHEXTRA=""
_ARCH=arm64
fi
if [ "$CONFIG_LP_ARCH_X86" = "y" ]; then
_ARCHINCDIR=$_INCDIR/x86
_ARCHLIBDIR=$_LIBDIR/x86
_ARCHEXTRA="-m32 "
_ARCH=x86
fi
if [ "$CONFIG_LP_ARCH_MOCK" = "y" ]; then
_ARCHINCDIR=$_INCDIR/mock
_ARCHLIBDIR=$_LIBDIR/mock
_ARCHEXTRA=""
_ARCH=mock
fi
if [ -f $_LIBDIR/libpayload.ldscript ]; then
_LDDIR=$_LIBDIR
elif [ -f $BASE/../arch/$_ARCH/libpayload.ldscript ]; then
_LDDIR=$BASE/../arch/$_ARCH
fi
# Host arch should youse default linker script
if [ "$CONFIG_LP_ARCH_MOCK" = "y" ]; then
_LDSCRIPT=""
else
_LDSCRIPT="-Wl,-T,$_LDDIR/libpayload.ldscript"
fi
trygccoption() {
$DEFAULT_CC $1 -S -xc /dev/null -o /dev/null &> /dev/null
return $?
}
DOLINK=1
# This variable will contain the command line that the user wants to
# pass to gas
CMDLINE=
# Process various flags that would change our behavior
while [ $# -gt 0 ]; do
case $1 in
-m32|-fno-stack-protector)
shift
continue
;;
-m64)
error "Invalid option --64 - only 32 bit architectures are supported"
;;
-c)
DOLINK=0
;;
-debug-wrapper)
DEBUGME=1
shift
continue
;;
-Wl,-T,*)
_LDSCRIPT="$1"
shift
continue
;;
*)
;;
esac
CMDLINE="$CMDLINE $1"
shift
done
_CFLAGS="$_ARCHEXTRA -nostdinc -nostdlib -I$_INCDIR -I$_ARCHINCDIR -D__LIBPAYLOAD__=1"
if [ $_LIBDIR = $_OBJ ]; then
_CFLAGS="$_CFLAGS -I$_OBJ"
if [ "$CONFIG_LP_PDCURSES" = y ]; then
_CFLAGS="$_CFLAGS -I$BASE/../curses/PDCurses -I$BASE/../curses/pdcurses-backend"
_CFLAGS="$_CFLAGS -I$BASE/../curses/form -I$BASE/../curses/menu"
fi
if [ "$CONFIG_LP_TINYCURSES" = y ]; then
_CFLAGS="$_CFLAGS -I$BASE/../curses"
fi
fi
# Check for the -fno-stack-protector silliness
trygccoption -fno-stack-protector
[ $? -eq 0 ] && _CFLAGS="$_CFLAGS -fno-stack-protector"
_CFLAGS="$_CFLAGS -include $BASE/../include/kconfig.h -include $BASE/../include/compiler.h"
_CFLAGS="$_CFLAGS -I`$DEFAULT_CC $_ARCHEXTRA -print-search-dirs | head -n 1 | cut -d' ' -f2`include"
_LDFLAGS="-L$_LIBDIR $_LDSCRIPT -static"
if [ $DOLINK -eq 0 ]; then
if [ $DEBUGME -eq 1 ]; then
echo "$DEFAULT_CC $CMDLINE $_CFLAGS"
fi
$DEFAULT_CC $CMDLINE $_CFLAGS
else
_LIBGCC=`$DEFAULT_CC $_ARCHEXTRA -print-libgcc-file-name`
if [ -f $_ARCHLIBDIR/head.o ]; then
HEAD_O=$_ARCHLIBDIR/head.o
elif [ -f $_OBJ/head.o ]; then
HEAD_O=$_OBJ/head.o
else
echo "Could not find head.o"
exit 1
fi
if [ "$CONFIG_LP_ARM64_A53_ERRATUM_843419" = y ] &&
grep -q fix-cortex-a53-843419 $_XCOMPILE; then
_LDFLAGS="$_LDFLAGS -Wl,--fix-cortex-a53-843419"
fi
_LDFLAGS="$_LDFLAGS -Wl,--defsym=CONFIG_LP_BASE_ADDRESS=$CONFIG_LP_BASE_ADDRESS"
_LDFLAGS="$_LDFLAGS -Wl,--defsym=CONFIG_LP_HEAP_SIZE=$CONFIG_LP_HEAP_SIZE"
_LDFLAGS="$_LDFLAGS -Wl,--defsym=CONFIG_LP_STACK_SIZE=$CONFIG_LP_STACK_SIZE"
if [ $DEBUGME -eq 1 ]; then
echo "$DEFAULT_CC $_LDFLAGS $HEAD_O $CMDLINE $_CFLAGS -lpayload $_LIBGCC"
fi
# Note: $_ARCHLIBDIR/head.o must be the first object being linked, because it
# contains a Multiboot header. The Multiboot standard requires this
# header to be placed below 0x2000 in the resulting image. See:
# http://www.gnu.org/software/grub/manual/multiboot/html_node/OS-image-format.html
$DEFAULT_CC $_LDFLAGS $HEAD_O $CMDLINE $_CFLAGS -lpayload $_LIBGCC
fi