coreboot-kgpe-d16/util/spd_tools/lp4x/README.md

# LPDDR4x SPD tools README

Tools for generating SPD files for LPDDR4x memory used in memory down
configurations on Intel Tiger Lake (TGL) and Jasper Lake (JSL) based
platforms. These tools generate SPDs following JESD209-4C
specification and Intel recommendations (doc #616599, #610202) for
LPDDR4x SPD.

There are two tools provided that assist TGL and JSL based mainboards
to generate SPDs and Makefile to integrate these SPDs in coreboot
build. These tools can also be used to allocate DRAM IDs (configure
DRAM hardware straps) for any LPDDR4x memory part used by the board.

* gen_spd.go: Generates de-duplicated SPD files using a global memory
  part list provided by the mainboard in JSON format. Additionally,
  generates a SPD manifest file(in CSV format) with information about
  what memory part from the global list uses which of the generated
  SPD files.

* gen_part_id.go: Allocates DRAM strap IDs for different LPDDR4x
  memory parts used by the board. Takes as input list of memory parts
  used by the board (with one memory part on each line) and the SPD
  manifest file generated by gen_spd.go. Generates Makefile.inc for
  integrating the generated SPD files in the coreboot build.

## Tool 1 - gen_spd.go

This program takes as input:
* Pointer to directory where the generated SPD files and manifest will
  be placed.
* JSON file containing a global list of memory parts with their
  attributes as per the datasheet. This is the list of all known
  LPDDR4x memory parts irrespective of their usage on the board.
* SoC platform name for which the SPDs are being generated. Currently
  supported platform names are `TGL` and `JSL`.

Input JSON file requires the following two fields for every memory part:
* `name`: Name of the memory part
* `attribs`: List of attributes of the memory part as per its
  datasheet. These attributes match the part specifications and are
  independent of any SoC expectations. Tool takes care of translating
  the physical attributes of the memory part to match JEDEC and Intel
  MRC expectations.

`attribs` field further contains two types of sub-fields:
* Mandatory: These attributes have to be provided for a memory part.
* Optional: These attributes can be provided by memory part if it wants
  to override the defaults.

### Mandatory `attribs`

* `densityPerChannelGb`: Density in Gb of the physical channel.

* `banks`: Number of banks per physical channel. This is typically 8
  for LPDDR4x memory parts.

* `channelsPerDie`: Number of physical channels per die. Valid values:
  `1, 2, 4`. For a part with x16 bit width, number of channels per die
  is 1 or 2.  For a part with x8 bit width, number of channels can be
  2 or 4 (4 is basically when two dual-channel byte mode devices are
  combined as shown in Figure 3 in JESD209-4C).

* `diesPerPackage`: Number of physical dies in each SDRAM
  package. As per JESD209-4C, "Standard LPDDR4 package ballmaps
  allocate one ZQ ball per die." Thus, number of diesPerPackage is the
  number of ZQ balls on the package.

* `bitWidthPerChannel`: Width of each physical channel. Valid values:
  `8, 16` bits.

* `ranksPerChannel`: Number of ranks per physical channel. Valid
  values: `1, 2`. If the channels across multiple dies share the same
  DQ/DQS pins but use a separate CS, then ranks is 2 else it is 1.

* `speedMbps`: Maximum data rate supported by the part in Mbps. Valid
  values: `3200, 3733, 4267` Mbps.

### Optional `attribs`

* `trfcabNs`: Minimum Refresh Recovery Delay Time (tRFCab) for all
  banks in nanoseconds. As per JESD209-4C, this is dependent on the
  density per channel. Default values used:
    * 6Gb : 280ns
    * 8Gb : 280ns
    * 12Gb: 380ns
    * 16Gb: 380ns

* `trfcpbNs`: Minimum Refresh Recovery Delay Time (tRFCab) per
  bank in nanoseconds. As per JESD209-4C, this is dependent on the
  density per channel. Default values used:
    * 6Gb : 140ns
    * 8Gb : 140ns
    * 12Gb: 190ns
    * 16Gb: 190ns

* `trpabMinNs`: Minimum Row Precharge Delay Time (tRPab) for all banks
  in nanoseconds. As per JESD209-4C, this is max(21ns, 4nck) which
  defaults to `21ns`.

* `trppbMinNs`: Minimum Row Precharge Delay Time (tRPpb) per bank in
  nanoseconds. As per JESD209-4C, this is max(18ns, 4nck) which
  defaults to `18ns`.

* `tckMinPs`: SDRAM minimum cycle time (tckMin) value in
  picoseconds. This is typically calculated based on the `speedMbps`
  attribute. `(1 / speedMbps) * 2`. Default values used(taken from
  JESD209-4C):
    * 4267 Mbps: 468ps
    * 3733 Mbps: 535ps
    * 3200 Mbps: 625ps

* `tckMaxPs`: SDRAM maximum cycle time (tckMax) value in
  picoseconds. Default value used: `31875ps`. As per JESD209-4C,
  TCKmax should be 100ns (100000ps) for all speed grades. But the SPD
  byte to encode this field is only 1 byte. Hence, the maximum value
  that can be encoded is 31875ps.

* `taaMinPs`: Minimum CAS Latency Time(taaMin) in picoseconds. This
  value defaults to nck * tckMin, where nck is minimum CAS latency.

* `trcdMinNs`: Minimum RAS# to CAS# Delay Time (tRCDmin) in
  nanoseconds. As per JESD209-4C, this is max(18ns, 4nck) which
  defaults to `18ns`.

* `casLatencies`: List of CAS latencies supported by the
  part. This is dependent on the attrib `speedMbps`. Default values
  used:
    * 4267: `"6 10 14 20 24 28 32 36"`.
    * 3733: `"6 10 14 20 24 28 32"`.
    * 3200: `"6 10 14 20 24 28"`.

### Example JSON file
```
{
    "parts": [
        {
            "name": "MEMORY_PART_A",
            "attribs": {
                "densityPerChannelGb": 8,
                "banks": 8,
                "channelsPerDie": 2,
                "diesPerPackage": 2,
                "bitWidthPerChannel": 16,
                "ranksPerChannel": 1,
                "speedMbps": 4267
            }
        },
        {
            "name": "MEMORY_PART_B",
            "attribs": {
                "densityPerChannelGb": 8,
                "banks": 8,
                "channelsPerDie": 1,
                "diesPerPackage": 2,
                "bitWidthPerChannel": 16,
                "ranksPerChannel": 1,
                "speedMbps": 3733,
                "casLatencies": "14 20 24 28 32",
                "tckMaxPs": "1250"
            }
        }
    ]
}
```

### Output

This tool generates the following files using the global list of
memory parts in JSON format as described above:
  * De-duplicated SPDs required for the different memory parts. These
    SPD files are named (spd_1.bin, spd_2.bin, spd_3.bin and so on)
    and placed in the directory provided as an input to the tool.
  * CSV file representing which of the deduplicated SPD files is used
    by which memory part. This file is named as
    `spd_manifest.generated.txt` and placed in the directory provided
    as an input to the tool along with the generated SPD
    files. Example CSV file:
    ```
    MEMORY_PART_A, spd_1.bin
    MEMORY_PART_B, spd_2.bin
    MEMORY_PART_C, spd_3.bin
    MEMORY_PART_D, spd_2.bin
    MEMORY_PART_E, spd_2.bin
    ```

## Tool 2 - gen_part_id.go

This program takes as input:
* Pointer to directory where the SPD files and the manifest file
  `spd_manifest.generated.txt` (in CSV format) are placed by
  gen_spd.go
* File containing list of memory parts used by the board. Each line of
  the file is supposed to contain one memory part `name` as present in
  the global list of memory parts provided to gen_spd.go
* Pointer to directory where the generated Makefile.inc should be
  placed by the tool.

### Output

This program provides the following:

* Prints out the list of DRAM hardware strap IDs that should be
  allocated to each memory part listed in the input file.
* Makefile.inc is generated in the provided directory to integrate
  SPDs generated by gen_spd.go with the coreboot build for the board.
* dram_id.generated.txt is generated in the same directory as
  Makefile. This contains the part IDs assigned to the different
  memory parts. (Useful to integrate in board schematics).

Sample output (dram_id.generated.txt):
```
DRAM Part Name                 ID to assign
MEMORY_PART_A                  0 (0000)
MEMORY_PART_B                  1 (0001)
MEMORY_PART_C                  2 (0010)
MEMORY_PART_D                  1 (0001)
```

Sample Makefile.inc:
```
## SPDX-License-Identifier: GPL-2.0-or-later
## This is an auto-generated file. Do not edit!!

SPD_SOURCES =
SPD_SOURCES += spd_1.bin      # ID = 0(0b0000)  Parts = MEMORY_PART_A
SPD_SOURCES += spd_2.bin      # ID = 1(0b0001)  Parts = MEMORY_PART_B, MEMORY_PART_D
SPD_SOURCES += spd_3.bin      # ID = 2(0b0010)  Parts = MEMORY_PART_C
```

### Note of caution

This program assigns DRAM IDs using the order of DRAM part names
provided in the input file. Thus, when adding a new memory part to the
list, it should always go to the end of the input text file. This
guarantees that the memory parts that were already assigned IDs do not
change.

## How to build the tools?
```
# go build gen_spd.go
# go build gen_part_id.go
```

## How to use the tools?
```
# ./gen_spd <spd_dir> <mem_parts_list_json> <platform>
# ./gen_part_id <spd_dir> <makefile_dir> <mem_parts_used_file>
```

### Need to add a new memory part for a board?

* If the memory part is not present in the global list of memory
  parts, then add the memory part name and attributes as per the
  datasheet to the file containing the global list.
  * Use `gen_spd.go` with input as the file containing the global list
    of memory parts to generate de-duplicated SPDs.
  * If a new SPD file is generated, use `git add` to add it to the
    tree and push a CL for review.
* Update the file containing memory parts used by board (variant) to
  add the new memory part name at the end of the file.
  * Use gen_part_id.go providing it pointer to the location where SPD
    files are stored and file containing the list of memory parts used
    by the board(variant).
  * Use `git add` to add `Makefile.inc` and `dram_id.generated.txt`
    with updated changes and push a CL for review.