coreboot-kgpe-d16/payloads/libpayload/libc/malloc.c

610 lines
14 KiB
C
Raw Normal View History

/*
*
* Copyright (C) 2008 Advanced Micro Devices, Inc.
* Copyright (C) 2008-2010 coresystems GmbH
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* This is a classically weak malloc() implementation. We have a relatively
* small and static heap, so we take the easy route with an O(N) loop
* through the tree for every malloc() and free(). Obviously, this doesn't
* scale past a few hundred KB (if that).
*
* We're also susceptible to the usual buffer overrun poisoning, though the
* risk is within acceptable ranges for this implementation (don't overrun
* your buffers, kids!).
*/
#define IN_MALLOC_C
#include <libpayload.h>
#include <stdint.h>
arm: libpayload: Add cache coherent DMA memory definition and management This patch adds a mechanism to set aside a region of cache-coherent (i.e. usually uncached) virtual memory, which can be used to communicate with DMA devices without automatic cache snooping (common on ARM) without the need of explicit flush/invalidation instructions in the driver code. This works by setting aside said region in the (board-specific) page table setup, as exemplary done in this patch for the Snow and Pit boards. It uses a new mechanism for adding board-specific Coreboot table entries to describe this region in an entry with the LB_DMA tag. Libpayload's memory allocator is enhanced to be able to operate on distinct types/regions of memory. It provides dma_malloc() and dma_memalign() functions for use in drivers, which by default just operate on the same heap as their traditional counterparts. However, if the Coreboot table parsing code finds a CB_DMA section, further requests through the dma_xxx() functions will return memory from the region described therein instead. Change-Id: Ia9c249249e936bbc3eb76e7b4822af2230ffb186 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167155 (cherry picked from commit d142ccdcd902a9d6ab4d495fbe6cbe85c61a5f01) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-08-28 00:48:32 +02:00
struct memory_type {
void *start;
void *end;
struct align_region_t* align_regions;
#if CONFIG(LP_DEBUG_MALLOC)
int magic_initialized;
size_t minimal_free;
const char *name;
#endif
arm: libpayload: Add cache coherent DMA memory definition and management This patch adds a mechanism to set aside a region of cache-coherent (i.e. usually uncached) virtual memory, which can be used to communicate with DMA devices without automatic cache snooping (common on ARM) without the need of explicit flush/invalidation instructions in the driver code. This works by setting aside said region in the (board-specific) page table setup, as exemplary done in this patch for the Snow and Pit boards. It uses a new mechanism for adding board-specific Coreboot table entries to describe this region in an entry with the LB_DMA tag. Libpayload's memory allocator is enhanced to be able to operate on distinct types/regions of memory. It provides dma_malloc() and dma_memalign() functions for use in drivers, which by default just operate on the same heap as their traditional counterparts. However, if the Coreboot table parsing code finds a CB_DMA section, further requests through the dma_xxx() functions will return memory from the region described therein instead. Change-Id: Ia9c249249e936bbc3eb76e7b4822af2230ffb186 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167155 (cherry picked from commit d142ccdcd902a9d6ab4d495fbe6cbe85c61a5f01) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-08-28 00:48:32 +02:00
};
extern char _heap, _eheap; /* Defined in the ldscript. */
static struct memory_type default_type =
{ (void *)&_heap, (void *)&_eheap, NULL
#if CONFIG(LP_DEBUG_MALLOC)
, 0, 0, "HEAP"
#endif
};
arm: libpayload: Add cache coherent DMA memory definition and management This patch adds a mechanism to set aside a region of cache-coherent (i.e. usually uncached) virtual memory, which can be used to communicate with DMA devices without automatic cache snooping (common on ARM) without the need of explicit flush/invalidation instructions in the driver code. This works by setting aside said region in the (board-specific) page table setup, as exemplary done in this patch for the Snow and Pit boards. It uses a new mechanism for adding board-specific Coreboot table entries to describe this region in an entry with the LB_DMA tag. Libpayload's memory allocator is enhanced to be able to operate on distinct types/regions of memory. It provides dma_malloc() and dma_memalign() functions for use in drivers, which by default just operate on the same heap as their traditional counterparts. However, if the Coreboot table parsing code finds a CB_DMA section, further requests through the dma_xxx() functions will return memory from the region described therein instead. Change-Id: Ia9c249249e936bbc3eb76e7b4822af2230ffb186 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167155 (cherry picked from commit d142ccdcd902a9d6ab4d495fbe6cbe85c61a5f01) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-08-28 00:48:32 +02:00
static struct memory_type *const heap = &default_type;
static struct memory_type *dma = &default_type;
typedef u64 hdrtype_t;
#define HDRSIZE (sizeof(hdrtype_t))
#define SIZE_BITS ((HDRSIZE << 3) - 7)
#define MAGIC (((hdrtype_t)0x2a) << (SIZE_BITS + 1))
#define FLAG_FREE (((hdrtype_t)0x01) << (SIZE_BITS + 0))
#define MAX_SIZE ((((hdrtype_t)0x01) << SIZE_BITS) - 1)
#define SIZE(_h) ((_h) & MAX_SIZE)
#define _HEADER(_s, _f) ((hdrtype_t) (MAGIC | (_f) | ((_s) & MAX_SIZE)))
#define FREE_BLOCK(_s) _HEADER(_s, FLAG_FREE)
#define USED_BLOCK(_s) _HEADER(_s, 0)
#define IS_FREE(_h) (((_h) & (MAGIC | FLAG_FREE)) == (MAGIC | FLAG_FREE))
#define HAS_MAGIC(_h) (((_h) & MAGIC) == MAGIC)
arm: libpayload: Add cache coherent DMA memory definition and management This patch adds a mechanism to set aside a region of cache-coherent (i.e. usually uncached) virtual memory, which can be used to communicate with DMA devices without automatic cache snooping (common on ARM) without the need of explicit flush/invalidation instructions in the driver code. This works by setting aside said region in the (board-specific) page table setup, as exemplary done in this patch for the Snow and Pit boards. It uses a new mechanism for adding board-specific Coreboot table entries to describe this region in an entry with the LB_DMA tag. Libpayload's memory allocator is enhanced to be able to operate on distinct types/regions of memory. It provides dma_malloc() and dma_memalign() functions for use in drivers, which by default just operate on the same heap as their traditional counterparts. However, if the Coreboot table parsing code finds a CB_DMA section, further requests through the dma_xxx() functions will return memory from the region described therein instead. Change-Id: Ia9c249249e936bbc3eb76e7b4822af2230ffb186 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167155 (cherry picked from commit d142ccdcd902a9d6ab4d495fbe6cbe85c61a5f01) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-08-28 00:48:32 +02:00
static int free_aligned(void* addr, struct memory_type *type);
void print_malloc_map(void);
arm: libpayload: Add cache coherent DMA memory definition and management This patch adds a mechanism to set aside a region of cache-coherent (i.e. usually uncached) virtual memory, which can be used to communicate with DMA devices without automatic cache snooping (common on ARM) without the need of explicit flush/invalidation instructions in the driver code. This works by setting aside said region in the (board-specific) page table setup, as exemplary done in this patch for the Snow and Pit boards. It uses a new mechanism for adding board-specific Coreboot table entries to describe this region in an entry with the LB_DMA tag. Libpayload's memory allocator is enhanced to be able to operate on distinct types/regions of memory. It provides dma_malloc() and dma_memalign() functions for use in drivers, which by default just operate on the same heap as their traditional counterparts. However, if the Coreboot table parsing code finds a CB_DMA section, further requests through the dma_xxx() functions will return memory from the region described therein instead. Change-Id: Ia9c249249e936bbc3eb76e7b4822af2230ffb186 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167155 (cherry picked from commit d142ccdcd902a9d6ab4d495fbe6cbe85c61a5f01) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-08-28 00:48:32 +02:00
void init_dma_memory(void *start, u32 size)
{
libpayload: Make EHCI driver cache-aware This patch makes the EHCI driver work on ARM platforms which usually do not support automatic cache snooping. It uses the new DMA memory mechanism (which needs to be correctly set up in the Coreboot mainboard code) to allocate all EHCI-internal communication structures in cache-coherent memory, and cleans/invalidates the externally supplied transfer buffers in Bulk and Control functions with explicit calls as necessary. Old-Change-Id: Ie8a62545d905b7a4fdd2a56b9405774be69779e5 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167339 (cherry picked from commit 322338934add36a5372ffe7d2a45e61a4fdd4a54) libpayload: ehci: Cache management is hard, let's go copying... It turns out that my previous commit to make the EHCI stack cache aware on ARM devices wasn't quite correct, and the problem is actually much trickier than I thought. After having some fun with more weird transfer problems that appear/disappear based on stack alignment, this is my current worst-case threat model that any cache managing implementation would need to handle correctly: Some upper layer calls ehci_bulk() with a transfer buffer on its stack. Due to stack alignment, it happens to start just at the top of a cache line, so up to 64 - 4 bytes of ehci_bulk's stack will share that line. ehci_bulk() calls dcache_clean() and initializes the USB transfer. Between that point and the call to dcache_invalidate() at the end of ehci_bulk(), any access to the stack variables in that cache line (even a speculative prefetch) will refetch the line into the cache. Afterwards any other access to a random memory location that just happens to get aliased to the same cache line may evict it again, causing the processor to write out stale data to the transfer buffer and possibly overwrite data that has already been received over USB. In short, any dcache_clean/dcache_invalidate-based implementation that preserves correctness while allowing any arbitrary (non cache-aligned) memory location as a transfer buffer is presumed to be impossible. Instead, this patch causes all transfer data to be copied to/from a cache-coherent bounce buffer. It will still transfer directly if the supplied buffer is already cache-coherent, which can be used by callers to optimize their transfers (and is true by default on x86). Old-Change-Id: I112908410bdbc8ca028d44f2f5d388c529f8057f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169231 Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 702dc50f1d56fe206442079fa443437f4336daed) Squashed the initial commit and a follow up fix. Change-Id: Idf7e5aa855b4f0221f82fa380a76049f273e4c88 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6633 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-08-28 21:29:28 +02:00
if (dma_initialized()) {
printf("ERROR: %s called twice!\n", __func__);
arm: libpayload: Add cache coherent DMA memory definition and management This patch adds a mechanism to set aside a region of cache-coherent (i.e. usually uncached) virtual memory, which can be used to communicate with DMA devices without automatic cache snooping (common on ARM) without the need of explicit flush/invalidation instructions in the driver code. This works by setting aside said region in the (board-specific) page table setup, as exemplary done in this patch for the Snow and Pit boards. It uses a new mechanism for adding board-specific Coreboot table entries to describe this region in an entry with the LB_DMA tag. Libpayload's memory allocator is enhanced to be able to operate on distinct types/regions of memory. It provides dma_malloc() and dma_memalign() functions for use in drivers, which by default just operate on the same heap as their traditional counterparts. However, if the Coreboot table parsing code finds a CB_DMA section, further requests through the dma_xxx() functions will return memory from the region described therein instead. Change-Id: Ia9c249249e936bbc3eb76e7b4822af2230ffb186 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167155 (cherry picked from commit d142ccdcd902a9d6ab4d495fbe6cbe85c61a5f01) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-08-28 00:48:32 +02:00
return;
}
/*
* DMA memory might not be zeroed by coreboot on stage loading, so make
* sure we clear the magic cookie from last boot.
*/
*(hdrtype_t *)start = 0;
arm: libpayload: Add cache coherent DMA memory definition and management This patch adds a mechanism to set aside a region of cache-coherent (i.e. usually uncached) virtual memory, which can be used to communicate with DMA devices without automatic cache snooping (common on ARM) without the need of explicit flush/invalidation instructions in the driver code. This works by setting aside said region in the (board-specific) page table setup, as exemplary done in this patch for the Snow and Pit boards. It uses a new mechanism for adding board-specific Coreboot table entries to describe this region in an entry with the LB_DMA tag. Libpayload's memory allocator is enhanced to be able to operate on distinct types/regions of memory. It provides dma_malloc() and dma_memalign() functions for use in drivers, which by default just operate on the same heap as their traditional counterparts. However, if the Coreboot table parsing code finds a CB_DMA section, further requests through the dma_xxx() functions will return memory from the region described therein instead. Change-Id: Ia9c249249e936bbc3eb76e7b4822af2230ffb186 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167155 (cherry picked from commit d142ccdcd902a9d6ab4d495fbe6cbe85c61a5f01) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-08-28 00:48:32 +02:00
dma = malloc(sizeof(*dma));
dma->start = start;
dma->end = start + size;
dma->align_regions = NULL;
#if CONFIG(LP_DEBUG_MALLOC)
dma->minimal_free = 0;
dma->magic_initialized = 0;
dma->name = "DMA";
printf("Initialized cache-coherent DMA memory at [%p:%p]\n", start, start + size);
#endif
arm: libpayload: Add cache coherent DMA memory definition and management This patch adds a mechanism to set aside a region of cache-coherent (i.e. usually uncached) virtual memory, which can be used to communicate with DMA devices without automatic cache snooping (common on ARM) without the need of explicit flush/invalidation instructions in the driver code. This works by setting aside said region in the (board-specific) page table setup, as exemplary done in this patch for the Snow and Pit boards. It uses a new mechanism for adding board-specific Coreboot table entries to describe this region in an entry with the LB_DMA tag. Libpayload's memory allocator is enhanced to be able to operate on distinct types/regions of memory. It provides dma_malloc() and dma_memalign() functions for use in drivers, which by default just operate on the same heap as their traditional counterparts. However, if the Coreboot table parsing code finds a CB_DMA section, further requests through the dma_xxx() functions will return memory from the region described therein instead. Change-Id: Ia9c249249e936bbc3eb76e7b4822af2230ffb186 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167155 (cherry picked from commit d142ccdcd902a9d6ab4d495fbe6cbe85c61a5f01) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-08-28 00:48:32 +02:00
}
libpayload: Make EHCI driver cache-aware This patch makes the EHCI driver work on ARM platforms which usually do not support automatic cache snooping. It uses the new DMA memory mechanism (which needs to be correctly set up in the Coreboot mainboard code) to allocate all EHCI-internal communication structures in cache-coherent memory, and cleans/invalidates the externally supplied transfer buffers in Bulk and Control functions with explicit calls as necessary. Old-Change-Id: Ie8a62545d905b7a4fdd2a56b9405774be69779e5 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167339 (cherry picked from commit 322338934add36a5372ffe7d2a45e61a4fdd4a54) libpayload: ehci: Cache management is hard, let's go copying... It turns out that my previous commit to make the EHCI stack cache aware on ARM devices wasn't quite correct, and the problem is actually much trickier than I thought. After having some fun with more weird transfer problems that appear/disappear based on stack alignment, this is my current worst-case threat model that any cache managing implementation would need to handle correctly: Some upper layer calls ehci_bulk() with a transfer buffer on its stack. Due to stack alignment, it happens to start just at the top of a cache line, so up to 64 - 4 bytes of ehci_bulk's stack will share that line. ehci_bulk() calls dcache_clean() and initializes the USB transfer. Between that point and the call to dcache_invalidate() at the end of ehci_bulk(), any access to the stack variables in that cache line (even a speculative prefetch) will refetch the line into the cache. Afterwards any other access to a random memory location that just happens to get aliased to the same cache line may evict it again, causing the processor to write out stale data to the transfer buffer and possibly overwrite data that has already been received over USB. In short, any dcache_clean/dcache_invalidate-based implementation that preserves correctness while allowing any arbitrary (non cache-aligned) memory location as a transfer buffer is presumed to be impossible. Instead, this patch causes all transfer data to be copied to/from a cache-coherent bounce buffer. It will still transfer directly if the supplied buffer is already cache-coherent, which can be used by callers to optimize their transfers (and is true by default on x86). Old-Change-Id: I112908410bdbc8ca028d44f2f5d388c529f8057f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169231 Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 702dc50f1d56fe206442079fa443437f4336daed) Squashed the initial commit and a follow up fix. Change-Id: Idf7e5aa855b4f0221f82fa380a76049f273e4c88 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6633 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-08-28 21:29:28 +02:00
int dma_initialized()
{
return dma != heap;
}
/* For boards that don't initialize DMA we assume all locations are coherent */
int dma_coherent(void *ptr)
{
return !dma_initialized() || (dma->start <= ptr && dma->end > ptr);
}
/* Find free block of size >= len */
static hdrtype_t volatile *find_free_block(int len, struct memory_type *type)
{
hdrtype_t header;
arm: libpayload: Add cache coherent DMA memory definition and management This patch adds a mechanism to set aside a region of cache-coherent (i.e. usually uncached) virtual memory, which can be used to communicate with DMA devices without automatic cache snooping (common on ARM) without the need of explicit flush/invalidation instructions in the driver code. This works by setting aside said region in the (board-specific) page table setup, as exemplary done in this patch for the Snow and Pit boards. It uses a new mechanism for adding board-specific Coreboot table entries to describe this region in an entry with the LB_DMA tag. Libpayload's memory allocator is enhanced to be able to operate on distinct types/regions of memory. It provides dma_malloc() and dma_memalign() functions for use in drivers, which by default just operate on the same heap as their traditional counterparts. However, if the Coreboot table parsing code finds a CB_DMA section, further requests through the dma_xxx() functions will return memory from the region described therein instead. Change-Id: Ia9c249249e936bbc3eb76e7b4822af2230ffb186 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167155 (cherry picked from commit d142ccdcd902a9d6ab4d495fbe6cbe85c61a5f01) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-08-28 00:48:32 +02:00
hdrtype_t volatile *ptr = (hdrtype_t volatile *)type->start;
/* Align the size. */
len = ALIGN_UP(len, HDRSIZE);
if (!len || len > MAX_SIZE)
return (void *)NULL;
/* Make sure the region is setup correctly. */
if (!HAS_MAGIC(*ptr)) {
size_t size = (type->end - type->start) - HDRSIZE;
*ptr = FREE_BLOCK(size);
#if CONFIG(LP_DEBUG_MALLOC)
type->magic_initialized = 1;
type->minimal_free = size;
#endif
}
/* Find some free space. */
do {
header = *ptr;
int size = SIZE(header);
if (!HAS_MAGIC(header) || size == 0) {
printf("memory allocator panic. (%s%s)\n",
!HAS_MAGIC(header) ? " no magic " : "",
size == 0 ? " size=0 " : "");
halt();
}
if ((header & FLAG_FREE) && len <= size)
return ptr;
ptr = (hdrtype_t volatile *)((uintptr_t)ptr + HDRSIZE + size);
arm: libpayload: Add cache coherent DMA memory definition and management This patch adds a mechanism to set aside a region of cache-coherent (i.e. usually uncached) virtual memory, which can be used to communicate with DMA devices without automatic cache snooping (common on ARM) without the need of explicit flush/invalidation instructions in the driver code. This works by setting aside said region in the (board-specific) page table setup, as exemplary done in this patch for the Snow and Pit boards. It uses a new mechanism for adding board-specific Coreboot table entries to describe this region in an entry with the LB_DMA tag. Libpayload's memory allocator is enhanced to be able to operate on distinct types/regions of memory. It provides dma_malloc() and dma_memalign() functions for use in drivers, which by default just operate on the same heap as their traditional counterparts. However, if the Coreboot table parsing code finds a CB_DMA section, further requests through the dma_xxx() functions will return memory from the region described therein instead. Change-Id: Ia9c249249e936bbc3eb76e7b4822af2230ffb186 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167155 (cherry picked from commit d142ccdcd902a9d6ab4d495fbe6cbe85c61a5f01) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-08-28 00:48:32 +02:00
} while (ptr < (hdrtype_t *) type->end);
/* Nothing available. */
return NULL;
}
/* Mark the block with length 'len' as used */
static void use_block(hdrtype_t volatile *ptr, int len)
{
/* Align the size. */
len = ALIGN_UP(len, HDRSIZE);
hdrtype_t volatile *nptr = (hdrtype_t volatile *)
((uintptr_t)ptr + HDRSIZE + len);
int size = SIZE(*ptr);
int nsize = size - (HDRSIZE + len);
/*
* If there is still room in this block, then mark it as such otherwise
* account the whole space for that block.
*/
if (nsize > 0) {
/* Mark the block as used. */
*ptr = USED_BLOCK(len);
/* Create a new free block. */
*nptr = FREE_BLOCK(nsize);
} else {
/* Mark the block as used. */
*ptr = USED_BLOCK(size);
}
}
static void *alloc(int len, struct memory_type *type)
{
hdrtype_t volatile *ptr = find_free_block(len, type);
if (ptr == NULL)
return NULL;
use_block(ptr, len);
return (void *)((uintptr_t)ptr + HDRSIZE);
}
arm: libpayload: Add cache coherent DMA memory definition and management This patch adds a mechanism to set aside a region of cache-coherent (i.e. usually uncached) virtual memory, which can be used to communicate with DMA devices without automatic cache snooping (common on ARM) without the need of explicit flush/invalidation instructions in the driver code. This works by setting aside said region in the (board-specific) page table setup, as exemplary done in this patch for the Snow and Pit boards. It uses a new mechanism for adding board-specific Coreboot table entries to describe this region in an entry with the LB_DMA tag. Libpayload's memory allocator is enhanced to be able to operate on distinct types/regions of memory. It provides dma_malloc() and dma_memalign() functions for use in drivers, which by default just operate on the same heap as their traditional counterparts. However, if the Coreboot table parsing code finds a CB_DMA section, further requests through the dma_xxx() functions will return memory from the region described therein instead. Change-Id: Ia9c249249e936bbc3eb76e7b4822af2230ffb186 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167155 (cherry picked from commit d142ccdcd902a9d6ab4d495fbe6cbe85c61a5f01) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-08-28 00:48:32 +02:00
static void _consolidate(struct memory_type *type)
{
arm: libpayload: Add cache coherent DMA memory definition and management This patch adds a mechanism to set aside a region of cache-coherent (i.e. usually uncached) virtual memory, which can be used to communicate with DMA devices without automatic cache snooping (common on ARM) without the need of explicit flush/invalidation instructions in the driver code. This works by setting aside said region in the (board-specific) page table setup, as exemplary done in this patch for the Snow and Pit boards. It uses a new mechanism for adding board-specific Coreboot table entries to describe this region in an entry with the LB_DMA tag. Libpayload's memory allocator is enhanced to be able to operate on distinct types/regions of memory. It provides dma_malloc() and dma_memalign() functions for use in drivers, which by default just operate on the same heap as their traditional counterparts. However, if the Coreboot table parsing code finds a CB_DMA section, further requests through the dma_xxx() functions will return memory from the region described therein instead. Change-Id: Ia9c249249e936bbc3eb76e7b4822af2230ffb186 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167155 (cherry picked from commit d142ccdcd902a9d6ab4d495fbe6cbe85c61a5f01) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-08-28 00:48:32 +02:00
void *ptr = type->start;
arm: libpayload: Add cache coherent DMA memory definition and management This patch adds a mechanism to set aside a region of cache-coherent (i.e. usually uncached) virtual memory, which can be used to communicate with DMA devices without automatic cache snooping (common on ARM) without the need of explicit flush/invalidation instructions in the driver code. This works by setting aside said region in the (board-specific) page table setup, as exemplary done in this patch for the Snow and Pit boards. It uses a new mechanism for adding board-specific Coreboot table entries to describe this region in an entry with the LB_DMA tag. Libpayload's memory allocator is enhanced to be able to operate on distinct types/regions of memory. It provides dma_malloc() and dma_memalign() functions for use in drivers, which by default just operate on the same heap as their traditional counterparts. However, if the Coreboot table parsing code finds a CB_DMA section, further requests through the dma_xxx() functions will return memory from the region described therein instead. Change-Id: Ia9c249249e936bbc3eb76e7b4822af2230ffb186 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167155 (cherry picked from commit d142ccdcd902a9d6ab4d495fbe6cbe85c61a5f01) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-08-28 00:48:32 +02:00
while (ptr < type->end) {
void *nptr;
hdrtype_t hdr = *((hdrtype_t *) ptr);
unsigned int size = 0;
if (!IS_FREE(hdr)) {
ptr += HDRSIZE + SIZE(hdr);
continue;
}
size = SIZE(hdr);
nptr = ptr + HDRSIZE + SIZE(hdr);
arm: libpayload: Add cache coherent DMA memory definition and management This patch adds a mechanism to set aside a region of cache-coherent (i.e. usually uncached) virtual memory, which can be used to communicate with DMA devices without automatic cache snooping (common on ARM) without the need of explicit flush/invalidation instructions in the driver code. This works by setting aside said region in the (board-specific) page table setup, as exemplary done in this patch for the Snow and Pit boards. It uses a new mechanism for adding board-specific Coreboot table entries to describe this region in an entry with the LB_DMA tag. Libpayload's memory allocator is enhanced to be able to operate on distinct types/regions of memory. It provides dma_malloc() and dma_memalign() functions for use in drivers, which by default just operate on the same heap as their traditional counterparts. However, if the Coreboot table parsing code finds a CB_DMA section, further requests through the dma_xxx() functions will return memory from the region described therein instead. Change-Id: Ia9c249249e936bbc3eb76e7b4822af2230ffb186 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167155 (cherry picked from commit d142ccdcd902a9d6ab4d495fbe6cbe85c61a5f01) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-08-28 00:48:32 +02:00
while (nptr < type->end) {
hdrtype_t nhdr = *((hdrtype_t *) nptr);
if (!(IS_FREE(nhdr)))
break;
size += SIZE(nhdr) + HDRSIZE;
*((hdrtype_t *) nptr) = 0;
nptr += (HDRSIZE + SIZE(nhdr));
}
*((hdrtype_t *) ptr) = FREE_BLOCK(size);
ptr = nptr;
}
}
void free(void *ptr)
{
hdrtype_t hdr;
arm: libpayload: Add cache coherent DMA memory definition and management This patch adds a mechanism to set aside a region of cache-coherent (i.e. usually uncached) virtual memory, which can be used to communicate with DMA devices without automatic cache snooping (common on ARM) without the need of explicit flush/invalidation instructions in the driver code. This works by setting aside said region in the (board-specific) page table setup, as exemplary done in this patch for the Snow and Pit boards. It uses a new mechanism for adding board-specific Coreboot table entries to describe this region in an entry with the LB_DMA tag. Libpayload's memory allocator is enhanced to be able to operate on distinct types/regions of memory. It provides dma_malloc() and dma_memalign() functions for use in drivers, which by default just operate on the same heap as their traditional counterparts. However, if the Coreboot table parsing code finds a CB_DMA section, further requests through the dma_xxx() functions will return memory from the region described therein instead. Change-Id: Ia9c249249e936bbc3eb76e7b4822af2230ffb186 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167155 (cherry picked from commit d142ccdcd902a9d6ab4d495fbe6cbe85c61a5f01) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-08-28 00:48:32 +02:00
struct memory_type *type = heap;
/* Sanity check. */
arm: libpayload: Add cache coherent DMA memory definition and management This patch adds a mechanism to set aside a region of cache-coherent (i.e. usually uncached) virtual memory, which can be used to communicate with DMA devices without automatic cache snooping (common on ARM) without the need of explicit flush/invalidation instructions in the driver code. This works by setting aside said region in the (board-specific) page table setup, as exemplary done in this patch for the Snow and Pit boards. It uses a new mechanism for adding board-specific Coreboot table entries to describe this region in an entry with the LB_DMA tag. Libpayload's memory allocator is enhanced to be able to operate on distinct types/regions of memory. It provides dma_malloc() and dma_memalign() functions for use in drivers, which by default just operate on the same heap as their traditional counterparts. However, if the Coreboot table parsing code finds a CB_DMA section, further requests through the dma_xxx() functions will return memory from the region described therein instead. Change-Id: Ia9c249249e936bbc3eb76e7b4822af2230ffb186 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167155 (cherry picked from commit d142ccdcd902a9d6ab4d495fbe6cbe85c61a5f01) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-08-28 00:48:32 +02:00
if (ptr < type->start || ptr >= type->end) {
type = dma;
if (ptr < type->start || ptr >= type->end)
return;
}
arm: libpayload: Add cache coherent DMA memory definition and management This patch adds a mechanism to set aside a region of cache-coherent (i.e. usually uncached) virtual memory, which can be used to communicate with DMA devices without automatic cache snooping (common on ARM) without the need of explicit flush/invalidation instructions in the driver code. This works by setting aside said region in the (board-specific) page table setup, as exemplary done in this patch for the Snow and Pit boards. It uses a new mechanism for adding board-specific Coreboot table entries to describe this region in an entry with the LB_DMA tag. Libpayload's memory allocator is enhanced to be able to operate on distinct types/regions of memory. It provides dma_malloc() and dma_memalign() functions for use in drivers, which by default just operate on the same heap as their traditional counterparts. However, if the Coreboot table parsing code finds a CB_DMA section, further requests through the dma_xxx() functions will return memory from the region described therein instead. Change-Id: Ia9c249249e936bbc3eb76e7b4822af2230ffb186 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167155 (cherry picked from commit d142ccdcd902a9d6ab4d495fbe6cbe85c61a5f01) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-08-28 00:48:32 +02:00
if (free_aligned(ptr, type)) return;
ptr -= HDRSIZE;
hdr = *((hdrtype_t *) ptr);
/* Not our header (we're probably poisoned). */
if (!HAS_MAGIC(hdr))
return;
/* Double free. */
if (hdr & FLAG_FREE)
return;
*((hdrtype_t *) ptr) = FREE_BLOCK(SIZE(hdr));
arm: libpayload: Add cache coherent DMA memory definition and management This patch adds a mechanism to set aside a region of cache-coherent (i.e. usually uncached) virtual memory, which can be used to communicate with DMA devices without automatic cache snooping (common on ARM) without the need of explicit flush/invalidation instructions in the driver code. This works by setting aside said region in the (board-specific) page table setup, as exemplary done in this patch for the Snow and Pit boards. It uses a new mechanism for adding board-specific Coreboot table entries to describe this region in an entry with the LB_DMA tag. Libpayload's memory allocator is enhanced to be able to operate on distinct types/regions of memory. It provides dma_malloc() and dma_memalign() functions for use in drivers, which by default just operate on the same heap as their traditional counterparts. However, if the Coreboot table parsing code finds a CB_DMA section, further requests through the dma_xxx() functions will return memory from the region described therein instead. Change-Id: Ia9c249249e936bbc3eb76e7b4822af2230ffb186 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167155 (cherry picked from commit d142ccdcd902a9d6ab4d495fbe6cbe85c61a5f01) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-08-28 00:48:32 +02:00
_consolidate(type);
}
void *malloc(size_t size)
{
arm: libpayload: Add cache coherent DMA memory definition and management This patch adds a mechanism to set aside a region of cache-coherent (i.e. usually uncached) virtual memory, which can be used to communicate with DMA devices without automatic cache snooping (common on ARM) without the need of explicit flush/invalidation instructions in the driver code. This works by setting aside said region in the (board-specific) page table setup, as exemplary done in this patch for the Snow and Pit boards. It uses a new mechanism for adding board-specific Coreboot table entries to describe this region in an entry with the LB_DMA tag. Libpayload's memory allocator is enhanced to be able to operate on distinct types/regions of memory. It provides dma_malloc() and dma_memalign() functions for use in drivers, which by default just operate on the same heap as their traditional counterparts. However, if the Coreboot table parsing code finds a CB_DMA section, further requests through the dma_xxx() functions will return memory from the region described therein instead. Change-Id: Ia9c249249e936bbc3eb76e7b4822af2230ffb186 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167155 (cherry picked from commit d142ccdcd902a9d6ab4d495fbe6cbe85c61a5f01) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-08-28 00:48:32 +02:00
return alloc(size, heap);
}
void *dma_malloc(size_t size)
{
return alloc(size, dma);
}
void *calloc(size_t nmemb, size_t size)
{
size_t total = nmemb * size;
arm: libpayload: Add cache coherent DMA memory definition and management This patch adds a mechanism to set aside a region of cache-coherent (i.e. usually uncached) virtual memory, which can be used to communicate with DMA devices without automatic cache snooping (common on ARM) without the need of explicit flush/invalidation instructions in the driver code. This works by setting aside said region in the (board-specific) page table setup, as exemplary done in this patch for the Snow and Pit boards. It uses a new mechanism for adding board-specific Coreboot table entries to describe this region in an entry with the LB_DMA tag. Libpayload's memory allocator is enhanced to be able to operate on distinct types/regions of memory. It provides dma_malloc() and dma_memalign() functions for use in drivers, which by default just operate on the same heap as their traditional counterparts. However, if the Coreboot table parsing code finds a CB_DMA section, further requests through the dma_xxx() functions will return memory from the region described therein instead. Change-Id: Ia9c249249e936bbc3eb76e7b4822af2230ffb186 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167155 (cherry picked from commit d142ccdcd902a9d6ab4d495fbe6cbe85c61a5f01) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-08-28 00:48:32 +02:00
void *ptr = alloc(total, heap);
if (ptr)
memset(ptr, 0, total);
return ptr;
}
void *realloc(void *ptr, size_t size)
{
void *ret, *pptr;
hdrtype_t volatile *block;
unsigned int osize;
arm: libpayload: Add cache coherent DMA memory definition and management This patch adds a mechanism to set aside a region of cache-coherent (i.e. usually uncached) virtual memory, which can be used to communicate with DMA devices without automatic cache snooping (common on ARM) without the need of explicit flush/invalidation instructions in the driver code. This works by setting aside said region in the (board-specific) page table setup, as exemplary done in this patch for the Snow and Pit boards. It uses a new mechanism for adding board-specific Coreboot table entries to describe this region in an entry with the LB_DMA tag. Libpayload's memory allocator is enhanced to be able to operate on distinct types/regions of memory. It provides dma_malloc() and dma_memalign() functions for use in drivers, which by default just operate on the same heap as their traditional counterparts. However, if the Coreboot table parsing code finds a CB_DMA section, further requests through the dma_xxx() functions will return memory from the region described therein instead. Change-Id: Ia9c249249e936bbc3eb76e7b4822af2230ffb186 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167155 (cherry picked from commit d142ccdcd902a9d6ab4d495fbe6cbe85c61a5f01) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-08-28 00:48:32 +02:00
struct memory_type *type = heap;
if (ptr == NULL)
arm: libpayload: Add cache coherent DMA memory definition and management This patch adds a mechanism to set aside a region of cache-coherent (i.e. usually uncached) virtual memory, which can be used to communicate with DMA devices without automatic cache snooping (common on ARM) without the need of explicit flush/invalidation instructions in the driver code. This works by setting aside said region in the (board-specific) page table setup, as exemplary done in this patch for the Snow and Pit boards. It uses a new mechanism for adding board-specific Coreboot table entries to describe this region in an entry with the LB_DMA tag. Libpayload's memory allocator is enhanced to be able to operate on distinct types/regions of memory. It provides dma_malloc() and dma_memalign() functions for use in drivers, which by default just operate on the same heap as their traditional counterparts. However, if the Coreboot table parsing code finds a CB_DMA section, further requests through the dma_xxx() functions will return memory from the region described therein instead. Change-Id: Ia9c249249e936bbc3eb76e7b4822af2230ffb186 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167155 (cherry picked from commit d142ccdcd902a9d6ab4d495fbe6cbe85c61a5f01) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-08-28 00:48:32 +02:00
return alloc(size, type);
pptr = ptr - HDRSIZE;
if (!HAS_MAGIC(*((hdrtype_t *) pptr)))
return NULL;
arm: libpayload: Add cache coherent DMA memory definition and management This patch adds a mechanism to set aside a region of cache-coherent (i.e. usually uncached) virtual memory, which can be used to communicate with DMA devices without automatic cache snooping (common on ARM) without the need of explicit flush/invalidation instructions in the driver code. This works by setting aside said region in the (board-specific) page table setup, as exemplary done in this patch for the Snow and Pit boards. It uses a new mechanism for adding board-specific Coreboot table entries to describe this region in an entry with the LB_DMA tag. Libpayload's memory allocator is enhanced to be able to operate on distinct types/regions of memory. It provides dma_malloc() and dma_memalign() functions for use in drivers, which by default just operate on the same heap as their traditional counterparts. However, if the Coreboot table parsing code finds a CB_DMA section, further requests through the dma_xxx() functions will return memory from the region described therein instead. Change-Id: Ia9c249249e936bbc3eb76e7b4822af2230ffb186 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167155 (cherry picked from commit d142ccdcd902a9d6ab4d495fbe6cbe85c61a5f01) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-08-28 00:48:32 +02:00
if (ptr < type->start || ptr >= type->end)
type = dma;
/* Get the original size of the block. */
osize = SIZE(*((hdrtype_t *) pptr));
/*
* Free the memory to update the tables - this won't touch the actual
* memory, so we can still use it for the copy after we have
* reallocated the new space.
*/
free(ptr);
block = find_free_block(size, type);
if (block == NULL)
return NULL;
ret = (void *)((uintptr_t)block + HDRSIZE);
/*
* If ret == ptr, then no copy is needed. Otherwise, move the memory to
* the new location, which might be before the old one and overlap since
* the free() above includes a _consolidate().
*/
if (ret != ptr)
memmove(ret, ptr, osize > size ? size : osize);
/* Mark the block as used. */
use_block(block, size);
return ret;
}
struct align_region_t
{
/* If alignment is 0 then the region represents a large region which
* has no metadata for tracking subelements. */
int alignment;
/* start in memory, and size in bytes */
void* start;
int size;
/* layout within a region:
- num_elements bytes, 0: free, 1: used, 2: used, combines with next
- padding to alignment
- data section
- waste space
start_data points to the start of the data section
*/
void* start_data;
/* number of free blocks sized "alignment" */
int free;
struct align_region_t *next;
};
static inline int region_is_large(const struct align_region_t *r)
{
return r->alignment == 0;
}
static inline int addr_in_region(const struct align_region_t *r, void *addr)
{
return ((addr >= r->start_data) && (addr < r->start_data + r->size));
}
/* num_elements == 0 indicates a large aligned region instead of a smaller
* region comprised of alignment-sized chunks. */
static struct align_region_t *allocate_region(int alignment, int num_elements,
size_t size, struct memory_type *type)
{
struct align_region_t *r;
size_t extra_space;
#if CONFIG(LP_DEBUG_MALLOC)
printf("%s(old align_regions=%p, alignment=%u, num_elements=%u, size=%zu)\n",
__func__, type->align_regions, alignment, num_elements, size);
#endif
r = malloc(sizeof(*r));
if (r == NULL)
return NULL;
memset(r, 0, sizeof(*r));
if (num_elements != 0) {
r->alignment = alignment;
r->size = num_elements * alignment;
r->free = num_elements;
/* Allocate enough memory for alignment requirements and
* metadata for each chunk. */
extra_space = num_elements;
} else {
/* Large aligned allocation. Set alignment = 0. */
r->alignment = 0;
r->size = size;
extra_space = 0;
}
r->start = alloc(r->size + alignment + extra_space, type);
if (r->start == NULL) {
free(r);
return NULL;
}
r->start_data = (void *)ALIGN_UP((uintptr_t)r->start + extra_space,
alignment);
/* Clear any (if requested) metadata. */
memset(r->start, 0, extra_space);
/* Link the region with the rest. */
r->next = type->align_regions;
type->align_regions = r;
return r;
}
static void try_free_region(struct align_region_t **prev_link)
{
struct align_region_t *r = *prev_link;
/* All large regions are immediately free-able. Non-large regions
* need to be checked for the fully freed state. */
if (!region_is_large(r)) {
if (r->free != r->size / r->alignment)
return;
}
/* Unlink region from link list. */
*prev_link = r->next;
/* Free the data and metadata. */
free(r->start);
free(r);
}
arm: libpayload: Add cache coherent DMA memory definition and management This patch adds a mechanism to set aside a region of cache-coherent (i.e. usually uncached) virtual memory, which can be used to communicate with DMA devices without automatic cache snooping (common on ARM) without the need of explicit flush/invalidation instructions in the driver code. This works by setting aside said region in the (board-specific) page table setup, as exemplary done in this patch for the Snow and Pit boards. It uses a new mechanism for adding board-specific Coreboot table entries to describe this region in an entry with the LB_DMA tag. Libpayload's memory allocator is enhanced to be able to operate on distinct types/regions of memory. It provides dma_malloc() and dma_memalign() functions for use in drivers, which by default just operate on the same heap as their traditional counterparts. However, if the Coreboot table parsing code finds a CB_DMA section, further requests through the dma_xxx() functions will return memory from the region described therein instead. Change-Id: Ia9c249249e936bbc3eb76e7b4822af2230ffb186 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167155 (cherry picked from commit d142ccdcd902a9d6ab4d495fbe6cbe85c61a5f01) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-08-28 00:48:32 +02:00
static int free_aligned(void* addr, struct memory_type *type)
{
struct align_region_t **prev_link = &type->align_regions;
while (*prev_link != NULL)
{
if (!addr_in_region(*prev_link, addr)) {
prev_link = &((*prev_link)->next);
continue;
}
if (region_is_large(*prev_link)) {
try_free_region(prev_link);
return 1;
}
int i = (addr-(*prev_link)->start_data)/(*prev_link)->alignment;
u8 *meta = (*prev_link)->start;
while (meta[i] == 2)
{
meta[i++] = 0;
(*prev_link)->free++;
}
meta[i] = 0;
(*prev_link)->free++;
try_free_region(prev_link);
return 1;
}
return 0;
}
arm: libpayload: Add cache coherent DMA memory definition and management This patch adds a mechanism to set aside a region of cache-coherent (i.e. usually uncached) virtual memory, which can be used to communicate with DMA devices without automatic cache snooping (common on ARM) without the need of explicit flush/invalidation instructions in the driver code. This works by setting aside said region in the (board-specific) page table setup, as exemplary done in this patch for the Snow and Pit boards. It uses a new mechanism for adding board-specific Coreboot table entries to describe this region in an entry with the LB_DMA tag. Libpayload's memory allocator is enhanced to be able to operate on distinct types/regions of memory. It provides dma_malloc() and dma_memalign() functions for use in drivers, which by default just operate on the same heap as their traditional counterparts. However, if the Coreboot table parsing code finds a CB_DMA section, further requests through the dma_xxx() functions will return memory from the region described therein instead. Change-Id: Ia9c249249e936bbc3eb76e7b4822af2230ffb186 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167155 (cherry picked from commit d142ccdcd902a9d6ab4d495fbe6cbe85c61a5f01) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-08-28 00:48:32 +02:00
static void *alloc_aligned(size_t align, size_t size, struct memory_type *type)
{
/* Define a large request to be 1024 bytes for either alignment or
* size of allocation. */
const size_t large_request = 1024;
if (size == 0) return 0;
arm: libpayload: Add cache coherent DMA memory definition and management This patch adds a mechanism to set aside a region of cache-coherent (i.e. usually uncached) virtual memory, which can be used to communicate with DMA devices without automatic cache snooping (common on ARM) without the need of explicit flush/invalidation instructions in the driver code. This works by setting aside said region in the (board-specific) page table setup, as exemplary done in this patch for the Snow and Pit boards. It uses a new mechanism for adding board-specific Coreboot table entries to describe this region in an entry with the LB_DMA tag. Libpayload's memory allocator is enhanced to be able to operate on distinct types/regions of memory. It provides dma_malloc() and dma_memalign() functions for use in drivers, which by default just operate on the same heap as their traditional counterparts. However, if the Coreboot table parsing code finds a CB_DMA section, further requests through the dma_xxx() functions will return memory from the region described therein instead. Change-Id: Ia9c249249e936bbc3eb76e7b4822af2230ffb186 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167155 (cherry picked from commit d142ccdcd902a9d6ab4d495fbe6cbe85c61a5f01) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-08-28 00:48:32 +02:00
if (type->align_regions == 0) {
type->align_regions = malloc(sizeof(struct align_region_t));
if (type->align_regions == NULL)
return NULL;
arm: libpayload: Add cache coherent DMA memory definition and management This patch adds a mechanism to set aside a region of cache-coherent (i.e. usually uncached) virtual memory, which can be used to communicate with DMA devices without automatic cache snooping (common on ARM) without the need of explicit flush/invalidation instructions in the driver code. This works by setting aside said region in the (board-specific) page table setup, as exemplary done in this patch for the Snow and Pit boards. It uses a new mechanism for adding board-specific Coreboot table entries to describe this region in an entry with the LB_DMA tag. Libpayload's memory allocator is enhanced to be able to operate on distinct types/regions of memory. It provides dma_malloc() and dma_memalign() functions for use in drivers, which by default just operate on the same heap as their traditional counterparts. However, if the Coreboot table parsing code finds a CB_DMA section, further requests through the dma_xxx() functions will return memory from the region described therein instead. Change-Id: Ia9c249249e936bbc3eb76e7b4822af2230ffb186 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167155 (cherry picked from commit d142ccdcd902a9d6ab4d495fbe6cbe85c61a5f01) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-08-28 00:48:32 +02:00
memset(type->align_regions, 0, sizeof(struct align_region_t));
}
arm: libpayload: Add cache coherent DMA memory definition and management This patch adds a mechanism to set aside a region of cache-coherent (i.e. usually uncached) virtual memory, which can be used to communicate with DMA devices without automatic cache snooping (common on ARM) without the need of explicit flush/invalidation instructions in the driver code. This works by setting aside said region in the (board-specific) page table setup, as exemplary done in this patch for the Snow and Pit boards. It uses a new mechanism for adding board-specific Coreboot table entries to describe this region in an entry with the LB_DMA tag. Libpayload's memory allocator is enhanced to be able to operate on distinct types/regions of memory. It provides dma_malloc() and dma_memalign() functions for use in drivers, which by default just operate on the same heap as their traditional counterparts. However, if the Coreboot table parsing code finds a CB_DMA section, further requests through the dma_xxx() functions will return memory from the region described therein instead. Change-Id: Ia9c249249e936bbc3eb76e7b4822af2230ffb186 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167155 (cherry picked from commit d142ccdcd902a9d6ab4d495fbe6cbe85c61a5f01) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-08-28 00:48:32 +02:00
struct align_region_t *reg = type->align_regions;
if (size >= large_request || align >= large_request) {
reg = allocate_region(align, 0, size, type);
if (reg == NULL)
return NULL;
return reg->start_data;
}
look_further:
while (reg != 0)
{
if ((reg->alignment == align) && (reg->free >= (size + align - 1)/align))
{
#if CONFIG(LP_DEBUG_MALLOC)
printf(" found memalign region. %u free, %zu required\n", reg->free, (size + align - 1)/align);
#endif
break;
}
reg = reg->next;
}
if (reg == 0)
{
#if CONFIG(LP_DEBUG_MALLOC)
printf(" need to allocate a new memalign region\n");
#endif
/* get align regions */
reg = allocate_region(align, large_request/align, size, type);
#if CONFIG(LP_DEBUG_MALLOC)
arm: libpayload: Add cache coherent DMA memory definition and management This patch adds a mechanism to set aside a region of cache-coherent (i.e. usually uncached) virtual memory, which can be used to communicate with DMA devices without automatic cache snooping (common on ARM) without the need of explicit flush/invalidation instructions in the driver code. This works by setting aside said region in the (board-specific) page table setup, as exemplary done in this patch for the Snow and Pit boards. It uses a new mechanism for adding board-specific Coreboot table entries to describe this region in an entry with the LB_DMA tag. Libpayload's memory allocator is enhanced to be able to operate on distinct types/regions of memory. It provides dma_malloc() and dma_memalign() functions for use in drivers, which by default just operate on the same heap as their traditional counterparts. However, if the Coreboot table parsing code finds a CB_DMA section, further requests through the dma_xxx() functions will return memory from the region described therein instead. Change-Id: Ia9c249249e936bbc3eb76e7b4822af2230ffb186 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167155 (cherry picked from commit d142ccdcd902a9d6ab4d495fbe6cbe85c61a5f01) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-08-28 00:48:32 +02:00
printf(" ... returned %p\n", reg);
#endif
}
if (reg == 0) {
/* Nothing available. */
return (void *)NULL;
}
int i, count = 0, target = (size+align-1)/align;
for (i = 0; i < (reg->size/align); i++)
{
if (((u8*)reg->start)[i] == 0)
{
count++;
if (count == target) {
count = i+1-count;
for (i=0; i<target-1; i++)
{
((u8*)reg->start)[count+i]=2;
}
((u8*)reg->start)[count+target-1]=1;
reg->free -= target;
return reg->start_data+(align*count);
}
} else {
count = 0;
}
}
/* The free space in this region is fragmented,
so we will move on and try the next one: */
reg = reg->next;
goto look_further; // end condition is once a new region is allocated - it always has enough space
}
arm: libpayload: Add cache coherent DMA memory definition and management This patch adds a mechanism to set aside a region of cache-coherent (i.e. usually uncached) virtual memory, which can be used to communicate with DMA devices without automatic cache snooping (common on ARM) without the need of explicit flush/invalidation instructions in the driver code. This works by setting aside said region in the (board-specific) page table setup, as exemplary done in this patch for the Snow and Pit boards. It uses a new mechanism for adding board-specific Coreboot table entries to describe this region in an entry with the LB_DMA tag. Libpayload's memory allocator is enhanced to be able to operate on distinct types/regions of memory. It provides dma_malloc() and dma_memalign() functions for use in drivers, which by default just operate on the same heap as their traditional counterparts. However, if the Coreboot table parsing code finds a CB_DMA section, further requests through the dma_xxx() functions will return memory from the region described therein instead. Change-Id: Ia9c249249e936bbc3eb76e7b4822af2230ffb186 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167155 (cherry picked from commit d142ccdcd902a9d6ab4d495fbe6cbe85c61a5f01) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-08-28 00:48:32 +02:00
void *memalign(size_t align, size_t size)
{
return alloc_aligned(align, size, heap);
}
void *dma_memalign(size_t align, size_t size)
{
return alloc_aligned(align, size, dma);
}
/* This is for debugging purposes. */
#if CONFIG(LP_DEBUG_MALLOC)
void print_malloc_map(void)
{
struct memory_type *type = heap;
void *ptr;
int free_memory;
again:
ptr = type->start;
free_memory = 0;
while (ptr < type->end) {
hdrtype_t hdr = *((hdrtype_t *) ptr);
if (!HAS_MAGIC(hdr)) {
if (type->magic_initialized)
printf("%s: Poisoned magic - we're toast\n", type->name);
else
printf("%s: No magic yet - going to initialize\n", type->name);
break;
}
/* FIXME: Verify the size of the block. */
printf("%s %x: %s (%llx bytes)\n", type->name,
(unsigned int)(ptr - type->start),
hdr & FLAG_FREE ? "FREE" : "USED", SIZE(hdr));
if (hdr & FLAG_FREE)
free_memory += SIZE(hdr);
ptr += HDRSIZE + SIZE(hdr);
}
if (free_memory && (type->minimal_free > free_memory))
type->minimal_free = free_memory;
printf("%s: Maximum memory consumption: %zu bytes\n", type->name,
(type->end - type->start) - HDRSIZE - type->minimal_free);
if (type != dma) {
type = dma;
goto again;
}
}
#endif