coreboot-kgpe-d16/src/devices/device_util.c

859 lines
21 KiB
C
Raw Normal View History

/*
* This file is part of the coreboot project.
*
* Copyright (C) 2003-2004 Linux Networx
* (Written by Eric Biederman <ebiederman@lnxi.com> for Linux Networx)
* Copyright (C) 2003 Greg Watson <jarrah@users.sourceforge.net>
* Copyright (C) 2004 Li-Ta Lo <ollie@lanl.gov>
* Copyright (C) 2005-2006 Tyan
* (Written by Yinghai Lu <yhlu@tyan.com> for Tyan)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <console/console.h>
#include <device/device.h>
#include <device/path.h>
#include <device/pci.h>
#include <device/resource.h>
#include <string.h>
/**
* See if a device structure exists for path.
*
* @param parent The bus to find the device on.
* @param path The relative path from the bus to the appropriate device.
* @return Pointer to a device structure for the device on bus at path
* or 0/NULL if no device is found.
*/
device_t find_dev_path(struct bus *parent, struct device_path *path)
{
device_t child;
for (child = parent->children; child; child = child->sibling) {
if (path_eq(path, &child->path))
break;
}
return child;
}
/**
* Given a PCI bus and a devfn number, find the device structure.
*
* @param bus The bus number.
* @param devfn A device/function number.
* @return Pointer to the device structure (if found), 0 otherwise.
*/
struct device *dev_find_slot(unsigned int bus, unsigned int devfn)
{
struct device *dev, *result;
result = 0;
for (dev = all_devices; dev; dev = dev->next) {
- Moved hlt() to it's own header. - Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11 16:01:31 +01:00
if ((dev->path.type == DEVICE_PATH_PCI) &&
(dev->bus->secondary == bus) &&
(dev->path.pci.devfn == devfn)) {
result = dev;
break;
}
}
return result;
}
/**
* Given an SMBus bus and a device number, find the device structure.
*
* @param bus The bus number.
* @param addr A device number.
* @return Pointer to the device structure (if found), 0 otherwise.
*/
struct device *dev_find_slot_on_smbus(unsigned int bus, unsigned int addr)
{
struct device *dev, *result;
result = 0;
for (dev = all_devices; dev; dev = dev->next) {
if ((dev->path.type == DEVICE_PATH_I2C) &&
(dev->bus->secondary == bus) &&
(dev->path.i2c.device == addr)) {
result = dev;
break;
}
}
return result;
}
/**
* Given a Local APIC ID, find the device structure.
*
* @param apic_id The Local APIC ID number.
* @return Pointer to the device structure (if found), 0 otherwise.
*/
device_t dev_find_lapic(unsigned apic_id)
{
device_t dev, result = NULL;
for (dev = all_devices; dev; dev = dev->next) {
if (dev->path.type == DEVICE_PATH_APIC &&
dev->path.apic.apic_id == apic_id) {
result = dev;
break;
}
}
return result;
}
/**
* Find a device of a given vendor and type.
*
* @param vendor A PCI vendor ID (e.g. 0x8086 for Intel).
* @param device A PCI device ID.
* @param from Pointer to the device structure, used as a starting point in
* the linked list of all_devices, which can be 0 to start at the
* head of the list (i.e. all_devices).
* @return Pointer to the device struct.
*/
struct device *dev_find_device(u16 vendor, u16 device, struct device *from)
{
if (!from)
from = all_devices;
else
from = from->next;
while (from && (from->vendor != vendor || from->device != device))
from = from->next;
return from;
}
/**
* Find a device of a given class.
*
* @param class Class of the device.
* @param from Pointer to the device structure, used as a starting point in
* the linked list of all_devices, which can be 0 to start at the
* head of the list (i.e. all_devices).
* @return Pointer to the device struct.
*/
struct device *dev_find_class(unsigned int class, struct device *from)
{
if (!from)
from = all_devices;
else
from = from->next;
while (from && (from->class & 0xffffff00) != class)
from = from->next;
return from;
}
/*
* Warning: This function uses a static buffer. Don't call it more than once
* from the same print statement!
*/
const char *dev_path(device_t dev)
{
static char buffer[DEVICE_PATH_MAX];
buffer[0] = '\0';
if (!dev) {
memcpy(buffer, "<null>", 7);
} else {
switch(dev->path.type) {
case DEVICE_PATH_ROOT:
memcpy(buffer, "Root Device", 12);
break;
case DEVICE_PATH_PCI:
#if CONFIG_PCI_BUS_SEGN_BITS
sprintf(buffer, "PCI: %04x:%02x:%02x.%01x",
dev->bus->secondary >> 8,
dev->bus->secondary & 0xff,
PCI_SLOT(dev->path.pci.devfn),
PCI_FUNC(dev->path.pci.devfn));
#else
sprintf(buffer, "PCI: %02x:%02x.%01x",
dev->bus->secondary,
PCI_SLOT(dev->path.pci.devfn),
PCI_FUNC(dev->path.pci.devfn));
#endif
break;
case DEVICE_PATH_PNP:
sprintf(buffer, "PNP: %04x.%01x",
dev->path.pnp.port, dev->path.pnp.device);
break;
case DEVICE_PATH_I2C:
sprintf(buffer, "I2C: %02x:%02x",
dev->bus->secondary,
dev->path.i2c.device);
break;
case DEVICE_PATH_APIC:
sprintf(buffer, "APIC: %02x",
dev->path.apic.apic_id);
break;
case DEVICE_PATH_IOAPIC:
sprintf(buffer, "IOAPIC: %02x",
dev->path.ioapic.ioapic_id);
break;
case DEVICE_PATH_PCI_DOMAIN:
sprintf(buffer, "PCI_DOMAIN: %04x",
dev->path.pci_domain.domain);
break;
case DEVICE_PATH_APIC_CLUSTER:
sprintf(buffer, "APIC_CLUSTER: %01x",
dev->path.apic_cluster.cluster);
break;
case DEVICE_PATH_CPU:
sprintf(buffer, "CPU: %02x", dev->path.cpu.id);
break;
case DEVICE_PATH_CPU_BUS:
sprintf(buffer, "CPU_BUS: %02x", dev->path.cpu_bus.id);
break;
default:
printk(BIOS_ERR, "Unknown device path type: %d\n",
dev->path.type);
break;
}
}
return buffer;
}
const char *bus_path(struct bus *bus)
{
static char buffer[BUS_PATH_MAX];
sprintf(buffer, "%s,%d", dev_path(bus->dev), bus->link_num);
return buffer;
}
int path_eq(struct device_path *path1, struct device_path *path2)
{
int equal = 0;
if (path1->type != path2->type)
return 0;
switch (path1->type) {
case DEVICE_PATH_NONE:
break;
case DEVICE_PATH_ROOT:
equal = 1;
break;
case DEVICE_PATH_PCI:
equal = (path1->pci.devfn == path2->pci.devfn);
break;
case DEVICE_PATH_PNP:
equal = (path1->pnp.port == path2->pnp.port) &&
(path1->pnp.device == path2->pnp.device);
break;
case DEVICE_PATH_I2C:
equal = (path1->i2c.device == path2->i2c.device);
break;
case DEVICE_PATH_APIC:
equal = (path1->apic.apic_id == path2->apic.apic_id);
break;
case DEVICE_PATH_PCI_DOMAIN:
equal = (path1->pci_domain.domain == path2->pci_domain.domain);
break;
case DEVICE_PATH_APIC_CLUSTER:
equal = (path1->apic_cluster.cluster
== path2->apic_cluster.cluster);
break;
case DEVICE_PATH_CPU:
equal = (path1->cpu.id == path2->cpu.id);
break;
case DEVICE_PATH_CPU_BUS:
equal = (path1->cpu_bus.id == path2->cpu_bus.id);
break;
default:
printk(BIOS_ERR, "Uknown device type: %d\n", path1->type);
break;
}
return equal;
}
- Moved hlt() to it's own header. - Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11 16:01:31 +01:00
/**
* Allocate 64 more resources to the free list.
*
* @return TODO.
*/
static int allocate_more_resources(void)
{
int i;
struct resource *new_res_list;
new_res_list = malloc(64 * sizeof(*new_res_list));
if (new_res_list == NULL)
return 0;
memset(new_res_list, 0, 64 * sizeof(*new_res_list));
for (i = 0; i < 64 - 1; i++)
new_res_list[i].next = &new_res_list[i+1];
free_resources = new_res_list;
return 1;
}
/**
* Remove resource res from the device's list and add it to the free list.
*
* @param dev TODO
* @param res TODO
* @param prev TODO
* @return TODO.
*/
static void free_resource(device_t dev, struct resource *res,
struct resource *prev)
{
if (prev)
prev->next = res->next;
else
dev->resource_list = res->next;
res->next = free_resources;
free_resources = res;
}
- Moved hlt() to it's own header. - Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11 16:01:31 +01:00
/**
* See if we have unused but allocated resource structures.
*
- Moved hlt() to it's own header. - Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11 16:01:31 +01:00
* If so remove the allocation.
*
* @param dev The device to find the resource on.
- Moved hlt() to it's own header. - Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11 16:01:31 +01:00
*/
void compact_resources(device_t dev)
{
struct resource *res, *next, *prev = NULL;
- Moved hlt() to it's own header. - Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11 16:01:31 +01:00
/* Move all of the free resources to the end */
for (res = dev->resource_list; res; res = next) {
next = res->next;
if (!res->flags)
free_resource(dev, res, prev);
else
prev = res;
- Moved hlt() to it's own header. - Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11 16:01:31 +01:00
}
}
/**
* See if a resource structure already exists for a given index.
*
* @param dev The device to find the resource on.
* @param index The index of the resource on the device.
* @return The resource, if it already exists.
- Moved hlt() to it's own header. - Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11 16:01:31 +01:00
*/
struct resource *probe_resource(device_t dev, unsigned index)
- Moved hlt() to it's own header. - Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11 16:01:31 +01:00
{
struct resource *res;
- Moved hlt() to it's own header. - Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11 16:01:31 +01:00
/* See if there is a resource with the appropriate index */
for (res = dev->resource_list; res; res = res->next) {
if (res->index == index)
- Moved hlt() to it's own header. - Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11 16:01:31 +01:00
break;
}
return res;
}
/**
* See if a resource structure already exists for a given index and if not
* allocate one.
*
* Then initialize the initialize the resource to default values.
*
* @param dev The device to find the resource on.
* @param index The index of the resource on the device.
* @return TODO.
*/
struct resource *new_resource(device_t dev, unsigned index)
{
struct resource *resource, *tail;
/* First move all of the free resources to the end. */
compact_resources(dev);
/* See if there is a resource with the appropriate index. */
resource = probe_resource(dev, index);
- Moved hlt() to it's own header. - Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11 16:01:31 +01:00
if (!resource) {
if (free_resources == NULL && !allocate_more_resources())
die("Couldn't allocate more resources.");
resource = free_resources;
free_resources = free_resources->next;
- Moved hlt() to it's own header. - Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11 16:01:31 +01:00
memset(resource, 0, sizeof(*resource));
resource->next = NULL;
tail = dev->resource_list;
if (tail) {
while (tail->next) tail = tail->next;
tail->next = resource;
} else {
dev->resource_list = resource;
}
- Moved hlt() to it's own header. - Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11 16:01:31 +01:00
}
/* Initialize the resource values. */
- Moved hlt() to it's own header. - Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11 16:01:31 +01:00
if (!(resource->flags & IORESOURCE_FIXED)) {
resource->flags = 0;
resource->base = 0;
}
resource->size = 0;
resource->limit = 0;
resource->index = index;
resource->align = 0;
resource->gran = 0;
return resource;
}
/**
* Return an existing resource structure for a given index.
*
* @param dev The device to find the resource on.
* @param index The index of the resource on the device.
* return TODO.
*/
struct resource *find_resource(device_t dev, unsigned index)
{
struct resource *resource;
/* See if there is a resource with the appropriate index. */
resource = probe_resource(dev, index);
if (!resource) {
printk(BIOS_EMERG, "%s missing resource: %02x\n",
dev_path(dev), index);
die("");
}
return resource;
}
/**
* Round a number up to the next multiple of gran.
*
* @param val The starting value.
* @param gran Granularity we are aligning the number to.
* @return The aligned value.
*/
static resource_t align_up(resource_t val, unsigned long gran)
{
resource_t mask;
mask = (1ULL << gran) - 1ULL;
val += mask;
val &= ~mask;
return val;
}
/**
* Round a number up to the previous multiple of gran.
*
* @param val The starting value.
* @param gran Granularity we are aligning the number to.
* @return The aligned value.
*/
static resource_t align_down(resource_t val, unsigned long gran)
{
resource_t mask;
mask = (1ULL << gran) - 1ULL;
val &= ~mask;
return val;
}
/**
* Compute the maximum address that is part of a resource.
*
* @param resource The resource whose limit is desired.
* @return The end.
*/
resource_t resource_end(struct resource *resource)
{
resource_t base, end;
/* Get the base address. */
base = resource->base;
/*
* For a non bridge resource granularity and alignment are the same.
* For a bridge resource align is the largest needed alignment below
* the bridge. While the granularity is simply how many low bits of
* the address cannot be set.
*/
/* Get the end (rounded up). */
end = base + align_up(resource->size, resource->gran) - 1;
return end;
}
/**
* Compute the maximum legal value for resource->base.
*
* @param resource The resource whose maximum is desired.
* @return The maximum.
*/
resource_t resource_max(struct resource *resource)
{
resource_t max;
max = align_down(resource->limit - resource->size + 1, resource->align);
return max;
}
/**
* Return the resource type of a resource.
*
* @param resource The resource type to decode.
* @return TODO.
*/
const char *resource_type(struct resource *resource)
{
static char buffer[RESOURCE_TYPE_MAX];
sprintf(buffer, "%s%s%s%s",
((resource->flags & IORESOURCE_READONLY) ? "ro" : ""),
((resource->flags & IORESOURCE_PREFETCH) ? "pref" : ""),
((resource->flags == 0) ? "unused" :
(resource->flags & IORESOURCE_IO) ? "io" :
(resource->flags & IORESOURCE_DRQ) ? "drq" :
(resource->flags & IORESOURCE_IRQ) ? "irq" :
(resource->flags & IORESOURCE_MEM) ? "mem" : "??????"),
((resource->flags & IORESOURCE_PCI64) ? "64" : ""));
return buffer;
}
/**
* Print the resource that was just stored.
*
* @param dev The device the stored resorce lives on.
* @param resource The resource that was just stored.
* @param comment TODO
*/
void report_resource_stored(device_t dev, struct resource *resource,
const char *comment)
{
char buf[10];
unsigned long long base, end;
if (!(resource->flags & IORESOURCE_STORED))
return;
base = resource->base;
end = resource_end(resource);
buf[0] = '\0';
if (resource->flags & IORESOURCE_PCI_BRIDGE) {
#if CONFIG_PCI_BUS_SEGN_BITS
sprintf(buf, "bus %04x:%02x ", dev->bus->secondary >> 8,
dev->link_list->secondary & 0xff);
#else
sprintf(buf, "bus %02x ", dev->link_list->secondary);
#endif
}
printk(BIOS_DEBUG, "%s %02lx <- [0x%010llx - 0x%010llx] size 0x%08llx "
"gran 0x%02x %s%s%s\n", dev_path(dev), resource->index,
base, end, resource->size, resource->gran, buf,
resource_type(resource), comment);
}
void search_bus_resources(struct bus *bus, unsigned long type_mask,
unsigned long type, resource_search_t search,
void *gp)
{
struct device *curdev;
for (curdev = bus->children; curdev; curdev = curdev->sibling) {
struct resource *res;
/* Ignore disabled devices. */
if (!curdev->enabled)
continue;
for (res = curdev->resource_list; res; res = res->next) {
/* If it isn't the right kind of resource ignore it. */
if ((res->flags & type_mask) != type)
continue;
/* If it is a subtractive resource recurse. */
if (res->flags & IORESOURCE_SUBTRACTIVE) {
struct bus * subbus;
for (subbus = curdev->link_list; subbus;
subbus = subbus->next)
if (subbus->link_num
== IOINDEX_SUBTRACTIVE_LINK(res->index))
break;
if (!subbus) /* Why can subbus be NULL? */
break;
search_bus_resources(subbus, type_mask, type,
search, gp);
continue;
}
search(gp, curdev, res);
}
}
}
void search_global_resources(unsigned long type_mask, unsigned long type,
resource_search_t search, void *gp)
{
struct device *curdev;
for (curdev = all_devices; curdev; curdev = curdev->next) {
struct resource *res;
/* Ignore disabled devices. */
if (!curdev->enabled)
continue;
for (res = curdev->resource_list; res; res = res->next) {
/* If it isn't the right kind of resource ignore it. */
if ((res->flags & type_mask) != type)
continue;
/* If it is a subtractive resource ignore it. */
if (res->flags & IORESOURCE_SUBTRACTIVE)
continue;
search(gp, curdev, res);
}
}
}
void dev_set_enabled(device_t dev, int enable)
{
if (dev->enabled == enable)
return;
dev->enabled = enable;
if (dev->ops && dev->ops->enable) {
dev->ops->enable(dev);
} else if (dev->chip_ops && dev->chip_ops->enable_dev) {
dev->chip_ops->enable_dev(dev);
}
}
void disable_children(struct bus *bus)
{
device_t child;
for (child = bus->children; child; child = child->sibling) {
struct bus *link;
for (link = child->link_list; link; link = link->next)
disable_children(link);
dev_set_enabled(child, 0);
}
}
static void resource_tree(struct device *root, int debug_level, int depth)
{
int i = 0;
struct device *child;
struct bus *link;
struct resource *res;
char indent[30]; /* If your tree has more levels, it's wrong. */
for (i = 0; i < depth + 1 && i < 29; i++)
indent[i] = ' ';
indent[i] = '\0';
do_printk(BIOS_DEBUG, "%s%s", indent, dev_path(root));
if (root->link_list && root->link_list->children)
do_printk(BIOS_DEBUG, " child on link 0 %s",
dev_path(root->link_list->children));
do_printk(BIOS_DEBUG, "\n");
for (res = root->resource_list; res; res = res->next) {
do_printk(debug_level, "%s%s resource base %llx size %llx "
"align %d gran %d limit %llx flags %lx index %lx\n",
indent, dev_path(root), res->base, res->size,
res->align, res->gran, res->limit, res->flags,
res->index);
}
for (link = root->link_list; link; link = link->next) {
for (child = link->children; child; child = child->sibling)
resource_tree(child, debug_level, depth + 1);
}
}
void print_resource_tree(struct device *root, int debug_level, const char *msg)
{
/* Bail if root is null. */
if (!root) {
do_printk(debug_level, "%s passed NULL for root!\n", __func__);
return;
}
/* Bail if not printing to screen. */
if (!do_printk(debug_level, "Show resources in subtree (%s)...%s\n",
dev_path(root), msg))
return;
resource_tree(root, debug_level, 0);
}
void show_devs_tree(struct device *dev, int debug_level, int depth, int linknum)
{
char depth_str[20] = "";
int i;
struct device *sibling;
struct bus *link;
for (i = 0; i < depth; i++)
depth_str[i] = ' ';
depth_str[i] = '\0';
do_printk(debug_level, "%s%s: enabled %d\n",
depth_str, dev_path(dev), dev->enabled);
for (link = dev->link_list; link; link = link->next) {
for (sibling = link->children; sibling;
sibling = sibling->sibling)
show_devs_tree(sibling, debug_level, depth + 1, i);
}
}
void show_all_devs_tree(int debug_level, const char *msg)
{
/* Bail if not printing to screen. */
if (!do_printk(debug_level, "Show all devs in tree form...%s\n", msg))
return;
show_devs_tree(all_devices, debug_level, 0, -1);
}
void show_devs_subtree(struct device *root, int debug_level, const char *msg)
{
/* Bail if not printing to screen. */
if (!do_printk(debug_level, "Show all devs in subtree %s...%s\n",
dev_path(root), msg))
return;
do_printk(debug_level, "%s\n", msg);
show_devs_tree(root, debug_level, 0, -1);
}
void show_all_devs(int debug_level, const char *msg)
{
struct device *dev;
/* Bail if not printing to screen. */
if (!do_printk(debug_level, "Show all devs...%s\n", msg))
return;
for (dev = all_devices; dev; dev = dev->next) {
do_printk(debug_level, "%s: enabled %d\n",
dev_path(dev), dev->enabled);
}
}
void show_one_resource(int debug_level, struct device *dev,
struct resource *resource, const char *comment)
{
char buf[10];
unsigned long long base, end;
base = resource->base;
end = resource_end(resource);
buf[0] = '\0';
/*
if (resource->flags & IORESOURCE_BRIDGE) {
#if CONFIG_PCI_BUS_SEGN_BITS
sprintf(buf, "bus %04x:%02x ", dev->bus->secondary >> 8,
dev->link[0].secondary & 0xff);
#else
sprintf(buf, "bus %02x ", dev->link[0].secondary);
#endif
}
*/
do_printk(debug_level, "%s %02lx <- [0x%010llx - 0x%010llx] "
"size 0x%08llx gran 0x%02x %s%s%s\n", dev_path(dev),
resource->index, base, end, resource->size, resource->gran,
buf, resource_type(resource), comment);
}
void show_all_devs_resources(int debug_level, const char* msg)
{
struct device *dev;
if (!do_printk(debug_level, "Show all devs with resources...%s\n", msg))
return;
for (dev = all_devices; dev; dev = dev->next) {
struct resource *res;
do_printk(debug_level, "%s: enabled %d\n",
dev_path(dev), dev->enabled);
for (res = dev->resource_list; res; res = res->next)
show_one_resource(debug_level, dev, res, "");
}
}
void ram_resource(device_t dev, unsigned long index,
unsigned long basek, unsigned long sizek)
{
struct resource *resource;
if (!sizek)
return;
resource = new_resource(dev, index);
resource->base = ((resource_t)basek) << 10;
resource->size = ((resource_t)sizek) << 10;
resource->flags = IORESOURCE_MEM | IORESOURCE_CACHEABLE | \
IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED;
}
void tolm_test(void *gp, struct device *dev, struct resource *new)
{
struct resource **best_p = gp;
struct resource *best;
best = *best_p;
if (!best || (best->base > new->base))
best = new;
*best_p = best;
}
u32 find_pci_tolm(struct bus *bus)
{
struct resource *min = NULL;
u32 tolm;
search_bus_resources(bus, IORESOURCE_MEM, IORESOURCE_MEM,
tolm_test, &min);
tolm = 0xffffffffUL;
if (min && tolm > min->base)
tolm = min->base;
return tolm;
}
/* Count of enabled CPUs */
int dev_count_cpu(void)
{
device_t cpu;
int count = 0;
for (cpu = all_devices; cpu; cpu = cpu->next) {
if ((cpu->path.type != DEVICE_PATH_APIC) ||
(cpu->bus->dev->path.type != DEVICE_PATH_APIC_CLUSTER))
continue;
if (!cpu->enabled)
continue;
count++;
}
return count;
}