GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
coreboot-kgpe-d16/payloads/libpayload/include/gdb.h

242 lines
8.6 KiB
C
Raw Normal View History

libpayload: Add remote GDB support This patch adds the ability to attach a GDB host through the UART to a running payload. Libpayload implements a small stub that can parse and respond to the GDB remote protocol and provide the required primitives (reading/writing registers/memory, etc.) to allow GDB to control execution. The goal of this implementation is to be as small and uninvasive as possible. It implements only the minimum amount of primitives required, and relies on GDB's impressive workaround capabilities (such as emulating breakpoints by temporarily replacing instructions) for the more complicated features. This way, a relatively tiny amount of code on the firmware side opens a vast range of capabilities to the user, not just in debugging but also in remote-controlling the firmware to change its behavior (e.g. through GDBs ability to modify variables and call functions). By default, a system with the REMOTEGDB Kconfig will only trap into GDB when executing halt() (including the calls from die_if(), assert(), and exception handlers). In addition, payloads can manually call gdb_enter() if desired. It will print a final "Ready for GDB connection." on the serial, detach the normal serial output driver and wait for the commands that GDB starts sending on attach. Based on original implementation by Gabe Black <gabeblack@chromium.org>. BUG=chrome-os-partner:18390 TEST=Boot a GDB enabled image in recovery mode (or get it to hit a halt()), close your terminal, execute '<toolchain>-gdb --symbols /build/<board>/firmware/depthcharge_gdb/depthcharge.elf --directory ~/trunk/src/third_party/coreboot/payloads/libpayload --directory ~/trunk/src/platform/depthcharge --directory ~/trunk/src/platform/vboot_reference --ex "target remote <cpu_uart_pty>"' and behold the magic. (You can also SIGSTOP your terminal's parent shell and the terminal itself, and SIGCONT them in reverse order after GDB exits. More convenient wrapper tools to do all this automatically coming soon.) Original-Change-Id: Ib440d1804126cdfdac4a8801f5015b4487e25269 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/202563 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 9c4a642c7be2faf122fef39bdfaddd64aec68b77) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I9238b4eb19d3ab2c98e4e1c5946cd7d252ca3c3b Reviewed-on: http://review.coreboot.org/8119 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-05-15 20:57:38 +02:00
/*
* Copyright 2014 Google Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but without any warranty; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
Remove address from GPLv2 headers As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-03-26 15:17:45 +01:00
* Foundation, Inc.
libpayload: Add remote GDB support This patch adds the ability to attach a GDB host through the UART to a running payload. Libpayload implements a small stub that can parse and respond to the GDB remote protocol and provide the required primitives (reading/writing registers/memory, etc.) to allow GDB to control execution. The goal of this implementation is to be as small and uninvasive as possible. It implements only the minimum amount of primitives required, and relies on GDB's impressive workaround capabilities (such as emulating breakpoints by temporarily replacing instructions) for the more complicated features. This way, a relatively tiny amount of code on the firmware side opens a vast range of capabilities to the user, not just in debugging but also in remote-controlling the firmware to change its behavior (e.g. through GDBs ability to modify variables and call functions). By default, a system with the REMOTEGDB Kconfig will only trap into GDB when executing halt() (including the calls from die_if(), assert(), and exception handlers). In addition, payloads can manually call gdb_enter() if desired. It will print a final "Ready for GDB connection." on the serial, detach the normal serial output driver and wait for the commands that GDB starts sending on attach. Based on original implementation by Gabe Black <gabeblack@chromium.org>. BUG=chrome-os-partner:18390 TEST=Boot a GDB enabled image in recovery mode (or get it to hit a halt()), close your terminal, execute '<toolchain>-gdb --symbols /build/<board>/firmware/depthcharge_gdb/depthcharge.elf --directory ~/trunk/src/third_party/coreboot/payloads/libpayload --directory ~/trunk/src/platform/depthcharge --directory ~/trunk/src/platform/vboot_reference --ex "target remote <cpu_uart_pty>"' and behold the magic. (You can also SIGSTOP your terminal's parent shell and the terminal itself, and SIGCONT them in reverse order after GDB exits. More convenient wrapper tools to do all this automatically coming soon.) Original-Change-Id: Ib440d1804126cdfdac4a8801f5015b4487e25269 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/202563 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 9c4a642c7be2faf122fef39bdfaddd64aec68b77) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I9238b4eb19d3ab2c98e4e1c5946cd7d252ca3c3b Reviewed-on: http://review.coreboot.org/8119 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-05-15 20:57:38 +02:00
*/
#ifndef _GDB_H_
#define _GDB_H_
#include <stdint.h>
struct gdb_message
{
u8 *buf;
int used;
const int size;
};
struct gdb_state
{
u8 signal;
u8 resumed : 1;
u8 connected : 1;
};
extern struct gdb_state gdb_state;
typedef void (*gdb_command_handler)(struct gdb_message *command,
int offset, struct gdb_message *reply);
struct gdb_command
{
const char *str;
gdb_command_handler handler;
};
extern struct gdb_command gdb_commands[];
extern const int gdb_command_count;
/* arch/gdb.c */
void gdb_arch_init(void);
void gdb_arch_enter(void);
int gdb_arch_set_single_step(int on);
void gdb_arch_encode_regs(struct gdb_message *message);
void gdb_arch_decode_regs(int offset, struct gdb_message *message);
/* gdb/transport.c */
void gdb_transport_init(void);
void gdb_transport_teardown(void);
void gdb_message_encode_bytes(struct gdb_message *message, const void *data,
int length);
void gdb_message_decode_bytes(const struct gdb_message *message, int offset,
void *data, int length);
void gdb_message_encode_zero_bytes(struct gdb_message *message, int length);
void gdb_message_add_string(struct gdb_message *message, const char *string);
void gdb_message_encode_int(struct gdb_message *message, uintptr_t val);
uintptr_t gdb_message_decode_int(const struct gdb_message *message, int offset,
int length);
int gdb_message_tokenize(const struct gdb_message *message, int *offset);
void gdb_get_command(struct gdb_message *command);
void gdb_send_reply(const struct gdb_message *reply);
/* gdb/stub.c */
void gdb_command_loop(uint8_t signal);
enum {
GDB_SIG0 = 0, /* Signal 0 */
GDB_SIGHUP = 1, /* Hangup */
GDB_SIGINT = 2, /* Interrupt */
GDB_SIGQUIT = 3, /* Quit */
GDB_SIGILL = 4, /* Illegal instruction */
GDB_SIGTRAP = 5, /* Trace/breakpoint trap */
GDB_SIGABRT = 6, /* Aborted */
GDB_SIGEMT = 7, /* Emulation trap */
GDB_SIGFPE = 8, /* Arithmetic exception */
GDB_SIGKILL = 9, /* Killed */
GDB_SIGBUS = 10, /* Bus error */
GDB_SIGSEGV = 11, /* Segmentation fault */
GDB_SIGSYS = 12, /* Bad system call */
GDB_SIGPIPE = 13, /* Broken pipe */
GDB_SIGALRM = 14, /* Alarm clock */
GDB_SIGTERM = 15, /* Terminated */
GDB_SIGURG = 16, /* Urgent I/O condition */
GDB_SIGSTOP = 17, /* Stopped (signal) */
GDB_SIGTSTP = 18, /* Stopped (user) */
GDB_SIGCONT = 19, /* Continued */
GDB_SIGCHLD = 20, /* Child status changed */
GDB_SIGTTIN = 21, /* Stopped (ttyinput) */
GDB_SIGTTOU = 22, /* Stopped (ttyoutput) */
GDB_SIGIO = 23, /* I/O possible */
GDB_SIGXCPU = 24, /* CPU time limit exceeded */
GDB_SIGXFSZ = 25, /* File size limit exceeded */
GDB_SIGVTALRM = 26, /* Virtual timer expired */
GDB_SIGPROF = 27, /* Profiling timer expired */
GDB_SIGWINCH = 28, /* Window size changed */
GDB_SIGLOST = 29, /* Resource lost */
GDB_SIGUSR1 = 30, /* User defined signal1 */
GDB_SUGUSR2 = 31, /* User defined signal2 */
GDB_SIGPWR = 32, /* Powerfail/restart */
GDB_SIGPOLL = 33, /* Pollable event occurred */
GDB_SIGWIND = 34, /* SIGWIND */
GDB_SIGPHONE = 35, /* SIGPHONE */
GDB_SIGWAITING = 36, /* Process's LWPs are blocked */
GDB_SIGLWP = 37, /* Signal LWP */
GDB_SIGDANGER = 38, /* Swap space dangerously low */
GDB_SIGGRANT = 39, /* Monitor mode granted */
GDB_SIGRETRACT = 40, /* Need to relinquish monitor mode */
GDB_SIGMSG = 41, /* Monitor mode data available */
GDB_SIGSOUND = 42, /* Sound completed */
GDB_SIGSAK = 43, /* Secure attention */
GDB_SIGPRIO = 44, /* SIGPRIO */
GDB_SIG33 = 45, /* Real-timeevent 33 */
GDB_SIG34 = 46, /* Real-timeevent 34 */
GDB_SIG35 = 47, /* Real-timeevent 35 */
GDB_SIG36 = 48, /* Real-timeevent 36 */
GDB_SIG37 = 49, /* Real-timeevent 37 */
GDB_SIG38 = 50, /* Real-timeevent 38 */
GDB_SIG39 = 51, /* Real-timeevent 39 */
GDB_SIG40 = 52, /* Real-timeevent 40 */
GDB_SIG41 = 53, /* Real-timeevent 41 */
GDB_SIG42 = 54, /* Real-timeevent 42 */
GDB_SIG43 = 55, /* Real-timeevent 43 */
GDB_SIG44 = 56, /* Real-timeevent 44 */
GDB_SIG45 = 57, /* Real-timeevent 45 */
GDB_SIG46 = 58, /* Real-timeevent 46 */
GDB_SIG47 = 59, /* Real-timeevent 47 */
GDB_SIG48 = 60, /* Real-timeevent 48 */
GDB_SIG49 = 61, /* Real-timeevent 49 */
GDB_SIG50 = 62, /* Real-timeevent 50 */
GDB_SIG51 = 63, /* Real-timeevent 51 */
GDB_SIG52 = 64, /* Real-timeevent 52 */
GDB_SIG53 = 65, /* Real-timeevent 53 */
GDB_SIG54 = 66, /* Real-timeevent 54 */
GDB_SIG55 = 67, /* Real-timeevent 55 */
GDB_SIG56 = 68, /* Real-timeevent 56 */
GDB_SIG57 = 69, /* Real-timeevent 57 */
GDB_SIG58 = 70, /* Real-timeevent 58 */
GDB_SIG59 = 71, /* Real-timeevent 59 */
GDB_SIG60 = 72, /* Real-timeevent 60 */
GDB_SIG61 = 73, /* Real-timeevent 61 */
GDB_SIG62 = 74, /* Real-timeevent 62 */
GDB_SIG63 = 75, /* Real-timeevent 63 */
GDB_SIGCANCEL = 76, /* LWP internal signal */
GDB_SIG32 = 77, /* Real-timeevent 32 */
GDB_SIG64 = 78, /* Real-timeevent 64 */
GDB_SIG65 = 79, /* Real-timeevent 65 */
GDB_SIG66 = 80, /* Real-timeevent 66 */
GDB_SIG67 = 81, /* Real-timeevent 67 */
GDB_SIG68 = 82, /* Real-timeevent 68 */
GDB_SIG69 = 83, /* Real-timeevent 69 */
GDB_SIG70 = 84, /* Real-timeevent 70 */
GDB_SIG71 = 85, /* Real-timeevent 71 */
GDB_SIG72 = 86, /* Real-timeevent 72 */
GDB_SIG73 = 87, /* Real-timeevent 73 */
GDB_SIG74 = 88, /* Real-timeevent 74 */
GDB_SIG75 = 89, /* Real-timeevent 75 */
GDB_SIG76 = 90, /* Real-timeevent 76 */
GDB_SIG77 = 91, /* Real-timeevent 77 */
GDB_SIG78 = 92, /* Real-timeevent 78 */
GDB_SIG79 = 93, /* Real-timeevent 79 */
GDB_SIG80 = 94, /* Real-timeevent 80 */
GDB_SIG81 = 95, /* Real-timeevent 81 */
GDB_SIG82 = 96, /* Real-timeevent 82 */
GDB_SIG83 = 97, /* Real-timeevent 83 */
GDB_SIG84 = 98, /* Real-timeevent 84 */
GDB_SIG85 = 99, /* Real-timeevent 85 */
GDB_SIG86 = 100, /* Real-timeevent 86 */
GDB_SIG87 = 101, /* Real-timeevent 87 */
GDB_SIG88 = 102, /* Real-timeevent 88 */
GDB_SIG89 = 103, /* Real-timeevent 89 */
GDB_SIG90 = 104, /* Real-timeevent 90 */
GDB_SIG91 = 105, /* Real-timeevent 91 */
GDB_SIG92 = 106, /* Real-timeevent 92 */
GDB_SIG93 = 107, /* Real-timeevent 93 */
GDB_SIG94 = 108, /* Real-timeevent 94 */
GDB_SIG95 = 109, /* Real-timeevent 95 */
GDB_SIG96 = 110, /* Real-timeevent 96 */
GDB_SIG97 = 111, /* Real-timeevent 97 */
GDB_SIG98 = 112, /* Real-timeevent 98 */
GDB_SIG99 = 113, /* Real-timeevent 99 */
GDB_SIG100 = 114, /* Real-timeevent 100 */
GDB_SIG101 = 115, /* Real-timeevent 101 */
GDB_SIG102 = 116, /* Real-timeevent 102 */
GDB_SIG103 = 117, /* Real-timeevent 103 */
GDB_SIG104 = 118, /* Real-timeevent 104 */
GDB_SIG105 = 119, /* Real-timeevent 105 */
GDB_SIG106 = 120, /* Real-timeevent 106 */
GDB_SIG107 = 121, /* Real-timeevent 107 */
GDB_SIG108 = 122, /* Real-timeevent 108 */
GDB_SIG109 = 123, /* Real-timeevent 109 */
GDB_SIG110 = 124, /* Real-timeevent 110 */
GDB_SIG111 = 125, /* Real-timeevent 111 */
GDB_SIG112 = 126, /* Real-timeevent 112 */
GDB_SIG113 = 127, /* Real-timeevent 113 */
GDB_SIG114 = 128, /* Real-timeevent 114 */
GDB_SIG115 = 129, /* Real-timeevent 115 */
GDB_SIG116 = 130, /* Real-timeevent 116 */
GDB_SIG117 = 131, /* Real-timeevent 117 */
GDB_SIG118 = 132, /* Real-timeevent 118 */
GDB_SIG119 = 133, /* Real-timeevent 119 */
GDB_SIG120 = 134, /* Real-timeevent 120 */
GDB_SIG121 = 135, /* Real-timeevent 121 */
GDB_SIG122 = 136, /* Real-timeevent 122 */
GDB_SIG123 = 137, /* Real-timeevent 123 */
GDB_SIG124 = 138, /* Real-timeevent 124 */
GDB_SIG125 = 139, /* Real-timeevent 125 */
GDB_SIG126 = 140, /* Real-timeevent 126 */
GDB_SIG127 = 141, /* Real-timeevent 127 */
GDB_SIGINFO = 142, /* Information request */
GDB_UNKNOWN1 = 43, /* Unknownsignal */
GDB_DEFAULT = 144, /* error:defaultsignal */
/* Machexceptions */
GDB_EXC_BAD_ACCESS = 145, /* Could not access memory */
GDB_EXC_BAD_INSTRCTION = 146, /* Illegal instruction/operand */
GDB_EXC_ARITHMETIC = 147, /* Arithmetic exception */
GDB_EXC_EMULATION = 148, /* Emulation instruction */
GDB_EXC_SOFTWARE = 149, /* Software generated exception */
GDB_EXC_BREAKPOINT = 150, /* Breakpoint */
};
#endif /* _GDB_H_ */