coreboot-kgpe-d16/src/mainboard/intel/d510mo/Makefile.inc

ramstage-y += cstates.c
romstage-y += gpio.c
mainboard/intel/d510mo: Add Intel D510MO mainboard Board uses Pineview native raminit Board boots from grub to linux kernel VGA needs work, currently headless machine Change-Id: I8e459c6d40e0711fac8fb8cfbf31d9cb2aaab3aa Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/10074 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> 2015-05-04 02:41:21 +02:00			`ramstage-y += cstates.c`
sb/ich7: Use common/gpio.h to set up GPIOs This is more consistent with newer Intel targets. This a static struct so it is initialized to 0 by default. To make it more readable: * only setting to GPIO mode is made explicit; * only pins in GPIO mode are either set to input or output since this is ignored in native mode; * only output pins are set high or low, since this is read-only on input; * blink is only operational on output pins, non-blink is not set explicitly; * invert is only operational on input pins, non-invert is not set explicitly. Change-Id: I05f9c52dee78b7120b225982c040e3dcc8ee3e4e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17639 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> 2016-11-29 14:13:43 +01:00			`romstage-y += gpio.c`