GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
coreboot-kgpe-d16/payloads/libpayload/Makefile.inc

159 lines
6.3 KiB
PHP
Raw Normal View History

Use coreboot build system for libpayload, too. This change makes building coreboot related projects more unified. Change-Id: I0f1181e2fffde1e03675523f7dc9eef3119052c3 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/71 Tested-by: build bot (Jenkins) Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
2011-04-21 18:48:50 +02:00
##
## This file is part of the libpayload project.
##
## Copyright (C) 2008 Advanced Micro Devices, Inc.
## Copyright (C) 2008 Uwe Hermann <uwe@hermann-uwe.de>
## Copyright (C) 2011 secunet Security Networks AG
##
## Redistribution and use in source and binary forms, with or without
## modification, are permitted provided that the following conditions
## are met:
## 1. Redistributions of source code must retain the above copyright
## notice, this list of conditions and the following disclaimer.
## 2. Redistributions in binary form must reproduce the above copyright
## notice, this list of conditions and the following disclaimer in the
## documentation and/or other materials provided with the distribution.
## 3. The name of the author may not be used to endorse or promote products
## derived from this software without specific prior written permission.
##
## THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
## ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
## IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
## ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
## FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
## DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
## OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
## HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
## LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
## OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
## SUCH DAMAGE.
##
export KERNELVERSION := 0.2.0
ARM: Generalize armv7 as arm. There are ARM systems which are essentially heterogeneous multicores where some cores implement a different ARM architecture version than other cores. A specific example is the tegra124 which boots on an ARMv4 coprocessor while most code, including most of the firmware, runs on the main ARMv7 core. To support SOCs like this, the plan is to generalize the ARM architecture so that all versions are available, and an SOC/CPU can then select what architecture variant should be used for each component of the firmware; bootblock, romstage, and ramstage. Old-Change-Id: I22e048c3bc72bd56371e14200942e436c1e312c2 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/171338 Reviewed-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 8423a41529da0ff67fb9873be1e2beb30b09ae2d) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> ARM: Split out ARMv7 code and make it possible to have other arch versions. We don't always want to use ARMv7 code when building for ARM, so we should separate out the ARMv7 code so it can be excluded, and also make it possible to include code for some other version of the architecture instead, all per build component for cases where we need more than one architecture version at a time. The tegra124 bootblock will ultimately need to be ARMv4, but until we have some ARMv4 code to switch over to we can leave it set to ARMv7. Old-Change-Id: Ia982c91057fac9c252397b7c866224f103761cc7 Reviewed-on: https://chromium-review.googlesource.com/171400 Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 799514e6060aa97acdcf081b5c48f965be134483) Squashed two related patches for splitting ARM support into general ARM support and ARMv7 specific pieces. Change-Id: Ic6511507953a2223c87c55f90252c4a4e1dd6010 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6782 Tested-by: build bot (Jenkins)
2013-10-01 08:00:33 +02:00
ARCHDIR-$(CONFIG_LP_ARCH_ARM) := arm
libpayload: Add support for arm64 in libpayload Basic support for arm64 is enabled in libpayload. Features added: 1) mem* operations in assembly. 2) Basic exception handling and support for testing exceptions. 3) Caching support. Tested with arm64-generic board compilation. BUG=None BRANCH=None TEST=Compilation successful Original-Change-Id: I4e86301f9c6383abc078e2b70071fb84bd6e4741 Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/187067 Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> (cherry picked from commit a70d13f3d225535843ab352290eab2e1ec7a9b4b) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ie3affe6a2bdd4fed3058de739d4c6aa573e5b251 Reviewed-on: http://review.coreboot.org/8063 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2014-02-19 20:35:30 +01:00
ARCHDIR-$(CONFIG_LP_ARCH_ARM64) := arm64
libpayload: arch/mips: Add basic MIPS architecture support Add the basic build infrastructure and architectural support required to build for targets using the MIPS architecture. This will require the addition of cache maintenance. BUG=chrome-os-partner:31438 TEST=tested on Pistachio FPGA with Depthcharge as payload; successfully executed payload. BRANCH=none Change-Id: I75cfd0536860b6d84b53a567940fe6668d9b2cbb Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 758c8cb9a6846e6ca32be409ec5f7a888ac9c888 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Change-Id: I0b9af983bf5032335a519ce2510a0b3aca082edf Original-Reviewed-on: https://chromium-review.googlesource.com/219740 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/8741 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-09-24 18:05:33 +02:00
ARCHDIR-$(CONFIG_LP_ARCH_MIPS) := mips
libpayload: Change CONFIG_* to CONFIG_LP_* in the kconfig. When libpayload header files are included in the payload itself, it's possible that the payloads config settings will conflict with the ones in libpayload. It's also possible for the libpayload config settings to conflict with the payloads. To avoid that, the libpayload config settings have _LP_ (for libpayload) added to them. The symbols themselves as defined in the Config.in files are still the same, but the prefix added to them is now CONFIG_LP_ instead of just CONFIG_. Change-Id: Ib8a46d202e7880afdeac7924d69a949bfbcc5f97 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/65303 Reviewed-by: Stefan Reinauer <reinauer@google.com> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 23e866da20862cace0ed2a67d6fb74056bc9ea9a) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6427 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-08-09 13:27:35 +02:00
ARCHDIR-$(CONFIG_LP_ARCH_X86) := x86
Libpayload: default DESTDIR for 'make install' If you would try download FILO via svn, then you probably get error message about libpayload install. This enables manually installing libpayload in legacy style :) Change-Id: I9f52be939303c5913611f21477d681e11d286382 Signed-off-by: Tadas Slotkus <devtadas@gmail.com> Reviewed-on: http://review.coreboot.org/102 Tested-by: build bot (Jenkins) Reviewed-by: Frank Vibrans III <frank.vibrans@amd.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-07-15 02:41:11 +02:00
DESTDIR ?= install
Use coreboot build system for libpayload, too. This change makes building coreboot related projects more unified. Change-Id: I0f1181e2fffde1e03675523f7dc9eef3119052c3 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/71 Tested-by: build bot (Jenkins) Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
2011-04-21 18:48:50 +02:00
real-target: lib
libpayload: Change CONFIG_* to CONFIG_LP_* in the kconfig. When libpayload header files are included in the payload itself, it's possible that the payloads config settings will conflict with the ones in libpayload. It's also possible for the libpayload config settings to conflict with the payloads. To avoid that, the libpayload config settings have _LP_ (for libpayload) added to them. The symbols themselves as defined in the Config.in files are still the same, but the prefix added to them is now CONFIG_LP_ instead of just CONFIG_. Change-Id: Ib8a46d202e7880afdeac7924d69a949bfbcc5f97 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/65303 Reviewed-by: Stefan Reinauer <reinauer@google.com> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 23e866da20862cace0ed2a67d6fb74056bc9ea9a) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6427 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-08-09 13:27:35 +02:00
classes-$(CONFIG_LP_PCI) += libpci
classes-$(CONFIG_LP_LIBC) += libc
classes-$(CONFIG_LP_CURSES) += libcurses
classes-$(CONFIG_LP_PDCURSES) += libmenu libform libpanel
classes-$(CONFIG_LP_CBFS) += libcbfs
classes-$(CONFIG_LP_LZMA) += liblzma
libpayload: Add LZ4 decompression algorithm This patch adds support for the LZ4 decompression algorithm to libpayload. It's what all the cool kids are using for decompression these days and has many interesting advantages over LZMA (and everything else I know of): blazing fast decompression (20(!) times faster than LZMA, twice as fast as LZO on my Cortex-A72), no memory requirements on decompression, and possibly in-place decompression support. It pays for that with a lower compression ratio (about 50% larger compressed size than LZMA, 10% larger than LZO for an ARM64 Linux kernel binary), but the boot time math still works in its favor for our IO speeds. This patch only adds the raw decompression functions for use by external payloads, we can later try integrating them in CBFS. It copies the decompression code itself unmodified from the upstream LZ4 library at github.com/Cyan4973/lz4 which will hopefully make it easy to update. The frame format parsing is reimplemented since the upstream version looks unnecessarily complex and unreadable for our needs. BRANCH=smaug BUG=chrome-os-partner:32184 TEST=With other patches, booted ARM64 kernel that got compressed from 15M to 5.1M and decompresses in 44ms. Change-Id: I65bdc4b2b19bd51c7b7e17a4e4b79da301a2a014 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f8a1fc996d5b0234d07f567fa8163d0f802d5144 Original-Change-Id: I15c0620da05561ade2552b15ffdf6bb3afd7eb26 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/282743 Original-Reviewed-by: Stefan Reinauer <reinauer@google.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/10845 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-30 19:30:30 +02:00
classes-$(CONFIG_LP_LZ4) += liblz4
libpayload: Add remote GDB support This patch adds the ability to attach a GDB host through the UART to a running payload. Libpayload implements a small stub that can parse and respond to the GDB remote protocol and provide the required primitives (reading/writing registers/memory, etc.) to allow GDB to control execution. The goal of this implementation is to be as small and uninvasive as possible. It implements only the minimum amount of primitives required, and relies on GDB's impressive workaround capabilities (such as emulating breakpoints by temporarily replacing instructions) for the more complicated features. This way, a relatively tiny amount of code on the firmware side opens a vast range of capabilities to the user, not just in debugging but also in remote-controlling the firmware to change its behavior (e.g. through GDBs ability to modify variables and call functions). By default, a system with the REMOTEGDB Kconfig will only trap into GDB when executing halt() (including the calls from die_if(), assert(), and exception handlers). In addition, payloads can manually call gdb_enter() if desired. It will print a final "Ready for GDB connection." on the serial, detach the normal serial output driver and wait for the commands that GDB starts sending on attach. Based on original implementation by Gabe Black <gabeblack@chromium.org>. BUG=chrome-os-partner:18390 TEST=Boot a GDB enabled image in recovery mode (or get it to hit a halt()), close your terminal, execute '<toolchain>-gdb --symbols /build/<board>/firmware/depthcharge_gdb/depthcharge.elf --directory ~/trunk/src/third_party/coreboot/payloads/libpayload --directory ~/trunk/src/platform/depthcharge --directory ~/trunk/src/platform/vboot_reference --ex "target remote <cpu_uart_pty>"' and behold the magic. (You can also SIGSTOP your terminal's parent shell and the terminal itself, and SIGCONT them in reverse order after GDB exits. More convenient wrapper tools to do all this automatically coming soon.) Original-Change-Id: Ib440d1804126cdfdac4a8801f5015b4487e25269 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/202563 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 9c4a642c7be2faf122fef39bdfaddd64aec68b77) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I9238b4eb19d3ab2c98e4e1c5946cd7d252ca3c3b Reviewed-on: http://review.coreboot.org/8119 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-05-15 20:57:38 +02:00
classes-$(CONFIG_LP_REMOTEGDB) += libgdb
Use coreboot build system for libpayload, too. This change makes building coreboot related projects more unified. Change-Id: I0f1181e2fffde1e03675523f7dc9eef3119052c3 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/71 Tested-by: build bot (Jenkins) Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
2011-04-21 18:48:50 +02:00
libraries := $(classes-y)
classes-y += head.o
subdirs-y := arch/$(ARCHDIR-y)
libpayload: Add remote GDB support This patch adds the ability to attach a GDB host through the UART to a running payload. Libpayload implements a small stub that can parse and respond to the GDB remote protocol and provide the required primitives (reading/writing registers/memory, etc.) to allow GDB to control execution. The goal of this implementation is to be as small and uninvasive as possible. It implements only the minimum amount of primitives required, and relies on GDB's impressive workaround capabilities (such as emulating breakpoints by temporarily replacing instructions) for the more complicated features. This way, a relatively tiny amount of code on the firmware side opens a vast range of capabilities to the user, not just in debugging but also in remote-controlling the firmware to change its behavior (e.g. through GDBs ability to modify variables and call functions). By default, a system with the REMOTEGDB Kconfig will only trap into GDB when executing halt() (including the calls from die_if(), assert(), and exception handlers). In addition, payloads can manually call gdb_enter() if desired. It will print a final "Ready for GDB connection." on the serial, detach the normal serial output driver and wait for the commands that GDB starts sending on attach. Based on original implementation by Gabe Black <gabeblack@chromium.org>. BUG=chrome-os-partner:18390 TEST=Boot a GDB enabled image in recovery mode (or get it to hit a halt()), close your terminal, execute '<toolchain>-gdb --symbols /build/<board>/firmware/depthcharge_gdb/depthcharge.elf --directory ~/trunk/src/third_party/coreboot/payloads/libpayload --directory ~/trunk/src/platform/depthcharge --directory ~/trunk/src/platform/vboot_reference --ex "target remote <cpu_uart_pty>"' and behold the magic. (You can also SIGSTOP your terminal's parent shell and the terminal itself, and SIGCONT them in reverse order after GDB exits. More convenient wrapper tools to do all this automatically coming soon.) Original-Change-Id: Ib440d1804126cdfdac4a8801f5015b4487e25269 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/202563 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 9c4a642c7be2faf122fef39bdfaddd64aec68b77) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I9238b4eb19d3ab2c98e4e1c5946cd7d252ca3c3b Reviewed-on: http://review.coreboot.org/8119 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-05-15 20:57:38 +02:00
subdirs-y += crypto libc drivers libpci gdb
libpayload: Change CONFIG_* to CONFIG_LP_* in the kconfig. When libpayload header files are included in the payload itself, it's possible that the payloads config settings will conflict with the ones in libpayload. It's also possible for the libpayload config settings to conflict with the payloads. To avoid that, the libpayload config settings have _LP_ (for libpayload) added to them. The symbols themselves as defined in the Config.in files are still the same, but the prefix added to them is now CONFIG_LP_ instead of just CONFIG_. Change-Id: Ib8a46d202e7880afdeac7924d69a949bfbcc5f97 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/65303 Reviewed-by: Stefan Reinauer <reinauer@google.com> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 23e866da20862cace0ed2a67d6fb74056bc9ea9a) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6427 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-08-09 13:27:35 +02:00
subdirs-$(CONFIG_LP_CURSES) += curses
subdirs-$(CONFIG_LP_CBFS) += libcbfs
subdirs-$(CONFIG_LP_LZMA) += liblzma
libpayload: Add LZ4 decompression algorithm This patch adds support for the LZ4 decompression algorithm to libpayload. It's what all the cool kids are using for decompression these days and has many interesting advantages over LZMA (and everything else I know of): blazing fast decompression (20(!) times faster than LZMA, twice as fast as LZO on my Cortex-A72), no memory requirements on decompression, and possibly in-place decompression support. It pays for that with a lower compression ratio (about 50% larger compressed size than LZMA, 10% larger than LZO for an ARM64 Linux kernel binary), but the boot time math still works in its favor for our IO speeds. This patch only adds the raw decompression functions for use by external payloads, we can later try integrating them in CBFS. It copies the decompression code itself unmodified from the upstream LZ4 library at github.com/Cyan4973/lz4 which will hopefully make it easy to update. The frame format parsing is reimplemented since the upstream version looks unnecessarily complex and unreadable for our needs. BRANCH=smaug BUG=chrome-os-partner:32184 TEST=With other patches, booted ARM64 kernel that got compressed from 15M to 5.1M and decompresses in 44ms. Change-Id: I65bdc4b2b19bd51c7b7e17a4e4b79da301a2a014 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f8a1fc996d5b0234d07f567fa8163d0f802d5144 Original-Change-Id: I15c0620da05561ade2552b15ffdf6bb3afd7eb26 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/282743 Original-Reviewed-by: Stefan Reinauer <reinauer@google.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/10845 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-30 19:30:30 +02:00
subdirs-$(CONFIG_LP_LZ4) += liblz4
Use coreboot build system for libpayload, too. This change makes building coreboot related projects more unified. Change-Id: I0f1181e2fffde1e03675523f7dc9eef3119052c3 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/71 Tested-by: build bot (Jenkins) Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
2011-04-21 18:48:50 +02:00
libpayload: Make Kconfig bools use IS_ENABLED() This will make the code work with the different styles of Kconfig (emit unset bools vs don't emit unset bools) Roughly, the patch does this, and a little bit of fixing up: perl -pi -e 's,ifdef (CONFIG_LP_.+?)\b,if IS_ENABLED\($1\),g' `find . -name *.[ch]` perl -pi -e 's,ifndef (CONFIG_LP_.+?)\b,if !IS_ENABLED\($1\),g' `find . -name *.[ch]` Change-Id: Ib8a839b056a1f806a8597052e1b571ea3d18a79f Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10711 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-30 00:47:34 +02:00
INCLUDES := -Iinclude -Iinclude/$(ARCHDIR-y) -I$(obj) -include include/kconfig.h
libpayload: don't overwrite CFLAGS Makefile already sets it to contain the architecture specific flags, don't drop them, but add to that instead. Change-Id: I147e6480ab2b3c1ee4f4ace511197b4ba94280b8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10804 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-06 11:09:30 +02:00
CFLAGS += $(EXTRA_CFLAGS) $(INCLUDES) -Os -pipe -nostdinc -ggdb3
libpayload: Clean up CFLAGS - Add -ffreestanding and -fomit-frame-pointer for all platforms. - Add ARMv7 specific flags to the armv7 Makefile Change-Id: I71ab1b096e505940cc20c266bccd43917bcfad3a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/56104 Commit-Queue: Stefan Reinauer <reinauer@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Tested-by: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: http://review.coreboot.org/4317 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-05-21 23:45:28 +02:00
CFLAGS += -nostdlib -fno-builtin -ffreestanding -fomit-frame-pointer
libpayload: always compile with -ffunction-sections Always compile with -ffunction-sections and -fdata-sections This does not hurt, and it allows the linker to produce much smaller binaries in some circumstances. Change-Id: Ibf9f24c210d6d2ed40451b4cf0d68ce88220bc5f Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10750 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-01 20:30:03 +02:00
CFLAGS += -ffunction-sections -fdata-sections
libpayload: Clean up CFLAGS - Add -ffreestanding and -fomit-frame-pointer for all platforms. - Add ARMv7 specific flags to the armv7 Makefile Change-Id: I71ab1b096e505940cc20c266bccd43917bcfad3a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/56104 Commit-Queue: Stefan Reinauer <reinauer@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Tested-by: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: http://review.coreboot.org/4317 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-05-21 23:45:28 +02:00
CFLAGS += -Wall -Wundef -Wstrict-prototypes -Wmissing-prototypes
Use coreboot build system for libpayload, too. This change makes building coreboot related projects more unified. Change-Id: I0f1181e2fffde1e03675523f7dc9eef3119052c3 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/71 Tested-by: build bot (Jenkins) Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
2011-04-21 18:48:50 +02:00
CFLAGS += -Wwrite-strings -Wredundant-decls -Wno-trigraphs
libpayload: Do not tolerate compilation warnings when building Make sure the build breaks in case of warnings. BUG=none TEST= All builds succeed with the restored patch and fail when a compilation warning is thrown. Original-Change-Id: I9bdcd8938f59913e4ba86df5e4921b3f821ef920 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/200110 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit 16dde875950d6806cc770cdbee4d3ff456ed6f02) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I86988f8d3f1acaa6ceeabdcbfa3cede1e67c28fe Reviewed-on: http://review.coreboot.org/7911 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2014-05-15 23:12:54 +02:00
CFLAGS += -Wstrict-aliasing -Wshadow -Werror
Use coreboot build system for libpayload, too. This change makes building coreboot related projects more unified. Change-Id: I0f1181e2fffde1e03675523f7dc9eef3119052c3 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/71 Tested-by: build bot (Jenkins) Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
2011-04-21 18:48:50 +02:00
$(obj)/libpayload-config.h: $(KCONFIG_AUTOHEADER)
cmp $@ $< 2>/dev/null || cp $< $@
library-targets = $(addsuffix .a,$(addprefix $(obj)/,$(libraries))) $(obj)/libpayload.a
lib: $$(library-targets) $(obj)/head.o
libpayload: Add PDCurses and ncurses' libform/libmenu PDCurses provides an alternative implementation of the curses library standard in addition to tinycurses. Where tinycurses is really tiny, PDCurses is more complete and provides virtually unlimited windows and the full API. The PDCurses code is brought in "vanilla", with all local changes residing in curses/pdcurses-backend/ In addition to a curses library, this change also provides libpanel (as part of the PDCurses code), and libform and libmenu which were derived from ncurses-5.9. As they rely on ncurses internals (and PDCurses is not ncurses), more changes were required for these libraries to work. The build system is extended to install the right set of header files depending on the selected curses implementation. Change-Id: I9e5b920f94b6510da01da2f656196a993170d1c5 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/106 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-07-07 15:41:53 +02:00
extract_nth=$(word $(1), $(subst |, ,$(2)))
#######################################################################
codebase: Change makefile $(shell pwd) commands to $(CURDIR) - Change the makefile command $(shell pwd) to $(CURDIR) to find the current directory without going out to the shell. Change-Id: I4890eba6129630acd2883b92de77308d39949443 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13967 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-03-08 20:32:40 +01:00
# Add handler for special include files
libpayload: Add PDCurses and ncurses' libform/libmenu PDCurses provides an alternative implementation of the curses library standard in addition to tinycurses. Where tinycurses is really tiny, PDCurses is more complete and provides virtually unlimited windows and the full API. The PDCurses code is brought in "vanilla", with all local changes residing in curses/pdcurses-backend/ In addition to a curses library, this change also provides libpanel (as part of the PDCurses code), and libform and libmenu which were derived from ncurses-5.9. As they rely on ncurses internals (and PDCurses is not ncurses), more changes were required for these libraries to work. The build system is extended to install the right set of header files depending on the selected curses implementation. Change-Id: I9e5b920f94b6510da01da2f656196a993170d1c5 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/106 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-07-07 15:41:53 +02:00
$(call add-special-class,includes)
includes-handler= \
$(if $(wildcard $(1)$(call extract_nth,1,$(2))), \
$(eval includes += $(1)$(2)))
Use coreboot build system for libpayload, too. This change makes building coreboot related projects more unified. Change-Id: I0f1181e2fffde1e03675523f7dc9eef3119052c3 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/71 Tested-by: build bot (Jenkins) Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
2011-04-21 18:48:50 +02:00
$(obj)/libpayload.a: $(foreach class,$(libraries),$$($(class)-objs))
codebase: Change makefile $(shell pwd) commands to $(CURDIR) - Change the makefile command $(shell pwd) to $(CURDIR) to find the current directory without going out to the shell. Change-Id: I4890eba6129630acd2883b92de77308d39949443 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13967 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-03-08 20:32:40 +01:00
printf " AR $(subst $(CURDIR)/,,$(@))\n"
Use coreboot build system for libpayload, too. This change makes building coreboot related projects more unified. Change-Id: I0f1181e2fffde1e03675523f7dc9eef3119052c3 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/71 Tested-by: build bot (Jenkins) Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
2011-04-21 18:48:50 +02:00
$(AR) rc $@ $^
$(obj)/%.a: $$(%-objs)
codebase: Change makefile $(shell pwd) commands to $(CURDIR) - Change the makefile command $(shell pwd) to $(CURDIR) to find the current directory without going out to the shell. Change-Id: I4890eba6129630acd2883b92de77308d39949443 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13967 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-03-08 20:32:40 +01:00
printf " AR $(subst $(CURDIR)/,,$(@))\n"
Use coreboot build system for libpayload, too. This change makes building coreboot related projects more unified. Change-Id: I0f1181e2fffde1e03675523f7dc9eef3119052c3 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/71 Tested-by: build bot (Jenkins) Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
2011-04-21 18:48:50 +02:00
$(AR) rc $@ $^
$(obj)/head.o: $(obj)/arch/$(ARCHDIR-y)/head.head.o.o
codebase: Change makefile $(shell pwd) commands to $(CURDIR) - Change the makefile command $(shell pwd) to $(CURDIR) to find the current directory without going out to the shell. Change-Id: I4890eba6129630acd2883b92de77308d39949443 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13967 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-03-08 20:32:40 +01:00
printf " CP $(subst $(CURDIR)/,,$(@))\n"
Use coreboot build system for libpayload, too. This change makes building coreboot related projects more unified. Change-Id: I0f1181e2fffde1e03675523f7dc9eef3119052c3 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/71 Tested-by: build bot (Jenkins) Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
2011-04-21 18:48:50 +02:00
cp $^ $@
install: real-target
printf " INSTALL $(DESTDIR)/libpayload/lib\n"
install -m 755 -d $(DESTDIR)/libpayload/lib
for lib in $(library-targets); do \
install -m 644 $$lib $(DESTDIR)/libpayload/lib/; \
done
libpayload; put the ldscript into an arch-dependent directory path Since it's utterly architecture-dependent, put it in arch/x86. Avoid the temptation to make yet another directory with just one file in it. Fix the makefile to pick up the proper arch-dependent script. Change-Id: I21ea02551a97bdcbc38419714f3b38cf8335c178 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2389 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-02-14 20:32:29 +01:00
install -m 644 arch/$(ARCHDIR-y)/libpayload.ldscript $(DESTDIR)/libpayload/lib/
Use coreboot build system for libpayload, too. This change makes building coreboot related projects more unified. Change-Id: I0f1181e2fffde1e03675523f7dc9eef3119052c3 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/71 Tested-by: build bot (Jenkins) Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
2011-04-21 18:48:50 +02:00
install -m 755 -d $(DESTDIR)/libpayload/lib/$(ARCHDIR-y)
install -m 644 $(obj)/head.o $(DESTDIR)/libpayload/lib/$(ARCHDIR-y)
printf " INSTALL $(DESTDIR)/libpayload/include\n"
install -m 755 -d $(DESTDIR)/libpayload/include
for file in `find include -name *.h -type f`; do \
install -m 755 -d $(DESTDIR)/libpayload/`dirname $$file`; \
install -m 644 $$file $(DESTDIR)/libpayload/$$file; \
done
install -m 644 $(obj)/libpayload-config.h $(DESTDIR)/libpayload/include
libpayload: Add PDCurses and ncurses' libform/libmenu PDCurses provides an alternative implementation of the curses library standard in addition to tinycurses. Where tinycurses is really tiny, PDCurses is more complete and provides virtually unlimited windows and the full API. The PDCurses code is brought in "vanilla", with all local changes residing in curses/pdcurses-backend/ In addition to a curses library, this change also provides libpanel (as part of the PDCurses code), and libform and libmenu which were derived from ncurses-5.9. As they rely on ncurses internals (and PDCurses is not ncurses), more changes were required for these libraries to work. The build system is extended to install the right set of header files depending on the selected curses implementation. Change-Id: I9e5b920f94b6510da01da2f656196a993170d1c5 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/106 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-07-07 15:41:53 +02:00
$(foreach item,$(includes), \
install -m 755 -d $(DESTDIR)/libpayload/include/$(call extract_nth,2,$(item)); \
install -m 644 $(call extract_nth,1,$(item)) $(DESTDIR)/libpayload/include/$(call extract_nth,2,$(item)); )
Use coreboot build system for libpayload, too. This change makes building coreboot related projects more unified. Change-Id: I0f1181e2fffde1e03675523f7dc9eef3119052c3 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/71 Tested-by: build bot (Jenkins) Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
2011-04-21 18:48:50 +02:00
printf " INSTALL $(DESTDIR)/libpayload/bin\n"
install -m 755 -d $(DESTDIR)/libpayload/bin
install -m 755 bin/lpgcc $(DESTDIR)/libpayload/bin
install -m 755 bin/lpas $(DESTDIR)/libpayload/bin
install -m 644 bin/lp.functions $(DESTDIR)/libpayload/bin
libpayload: use $(DOTCONFIG) instead of .config When overriding the DOTCONFIG variable, make install will fail in libpayload. Change-Id: I332be3a4ca2620a32a6f5fbe683e6c71f0d6a9e9 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2178 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-01-17 21:29:51 +01:00
install -m 644 $(DOTCONFIG) $(DESTDIR)/libpayload/libpayload.config
libpayload: Have make install save .xcompile file Useful information, record it in the destination directory, together with .config. Change-Id: Icf3282f61f502b37f9f06d7d5a0a630f49c96ed2 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10864 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-09 02:09:49 +02:00
install -m 755 .xcompile $(DESTDIR)/libpayload/libpayload.xcompile
Use coreboot build system for libpayload, too. This change makes building coreboot related projects more unified. Change-Id: I0f1181e2fffde1e03675523f7dc9eef3119052c3 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/71 Tested-by: build bot (Jenkins) Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
2011-04-21 18:48:50 +02:00
clean-for-update-target:
rm -f $(addsuffix .a,$(addprefix $(obj)/,$(libraries))) $(obj)/libpayload.a
clean-target:
prepare:
libpayload: add junit.xml build target It builds all defconfigs/* and logs the results in junit.xml, suitable for consumption by jenkins Change-Id: I86c4022851b47820c95359b2ea9b735a77b1bc2c Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/4551 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-12-21 21:08:53 +01:00
junit.xml:
echo '<?xml version="1.0" encoding="utf-8"?><testsuite>' > $@.tmp
for i in $(filter-out %.old,$(wildcard configs/*)); do \
$(MAKE) clean; \
libpayload: update junit.xml target, clean up output - Copy each config in configs/ to the junit_config, update each, in turn, and clean up when done. This avoids updating the saved config files and creating dirty files in git. - Use 'make olddefconfig' instead of 'yes "" | make oldconfig' - Update clean target to remove junit_config file - Update distclean target to remove junit.xml Change-Id: Ib023eb3197f2d8806c73c9c18464157ce3de958f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14164 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-23 23:07:54 +01:00
cp "$$i" junit_config; \
$(MAKE) olddefconfig DOTCONFIG=junit_config V=$(V) Q=$(Q) 2>/dev/null >/dev/null; \
libpayload: add junit.xml build target It builds all defconfigs/* and logs the results in junit.xml, suitable for consumption by jenkins Change-Id: I86c4022851b47820c95359b2ea9b735a77b1bc2c Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/4551 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-12-21 21:08:53 +01:00
echo "<testcase classname='libpayload' name='$$i'>" >> $@.tmp; \
libpayload: update junit.xml target, clean up output - Copy each config in configs/ to the junit_config, update each, in turn, and clean up when done. This avoids updating the saved config files and creating dirty files in git. - Use 'make olddefconfig' instead of 'yes "" | make oldconfig' - Update clean target to remove junit_config file - Update distclean target to remove junit.xml Change-Id: Ib023eb3197f2d8806c73c9c18464157ce3de958f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14164 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-23 23:07:54 +01:00
$(MAKE) V=$(V) Q=$(Q) CONFIG_LP_CCACHE=$(CONFIG_LP_CCACHE) DOTCONFIG=junit_config >> $@.tmp.2 2>&1 && type="system-out" || type="failure"; \
libpayload: add junit.xml build target It builds all defconfigs/* and logs the results in junit.xml, suitable for consumption by jenkins Change-Id: I86c4022851b47820c95359b2ea9b735a77b1bc2c Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/4551 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-12-21 21:08:53 +01:00
if [ $$type = "failure" ]; then \
echo "<failure type='buildFailed'>" >> $@.tmp; \
else \
echo "<$$type>" >> $@.tmp; \
fi; \
echo '<![CDATA[' >> $@.tmp; \
cat $@.tmp.2 >> $@.tmp; \
echo "]]></$$type>" >>$@.tmp; \
rm -f $@.tmp.2; \
echo "</testcase>" >> $@.tmp; \
done
echo "</testsuite>" >> $@.tmp
mv $@.tmp $@
copy & update test routines from what-jenkins-does Currently the only testing we had was 'what-jenkins-does' and 'make lint'. While the lint testing is suitable for developers, the 'what-jenkins-does' target really isn't, as it was designed specifically for testing on jenkins. This adds the infrastructure for basic tests that are more suitable for the developer. Extended tests and improvements will follow. Add the coreboot-builds directories to .gitignore. TODO: - Save/restore .config - Update test-abuild to use existing COREBOOT_BUILD_DIR variable Change-Id: I19e1256d79531112ff84e47a307f55791533806f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20874 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Chris Ching <chingcodes@google.com>
2017-08-03 17:25:43 +02:00
test-configs:
for config in $(filter-out %.old,$(wildcard configs/*)); do \
$(MAKE) clean; \
cp "$$config" test_config; \
echo "*** Making libpayload config $$config ***"; \
$(MAKE) olddefconfig DOTCONFIG=test_config V=$(V) Q=$(Q) ; \
$(MAKE) V=$(V) Q=$(Q) CONFIG_LP_CCACHE=$(CONFIG_LP_CCACHE) DOTCONFIG=test_config; \
done