mb/lenovo/t520: Switch to overridetree

Change-Id: If6be9cffe97dcd8f733e3bd5a67a408dd817005a
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37295
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
Peter Lemenkov 2019-11-27 15:33:21 +01:00 committed by Patrick Georgi
parent 99035650aa
commit 02b29b9d01
5 changed files with 26 additions and 183 deletions

View File

@ -51,9 +51,9 @@ config MAINBOARD_DIR
string
default "lenovo/t520"
config DEVICETREE
config OVERRIDE_DEVICETREE
string
default "variants/$(CONFIG_VARIANT_DIR)/devicetree.cb"
default "variants/$(CONFIG_VARIANT_DIR)/overridetree.cb"
config FMDFILE
string

View File

@ -90,7 +90,7 @@ chip northbridge/intel/sandybridge
end # PCIe Port #4 Express Card
device pci 1c.4 on end # PCIe Port #5 MMC/SDXC + IEEE1394
device pci 1c.5 off end # PCIe Port #6 Intel Ethernet PHY
device pci 1c.6 on end # PCIe Port #7 USB 3.0 only W520
device pci 1c.6 off end # PCIe Port #7
device pci 1c.7 off end # PCIe Port #8
device pci 1d.0 on end # USB2 EHCI #1

View File

@ -1,180 +0,0 @@
chip northbridge/intel/sandybridge
# IGD Displays
register "gfx.ndid" = "3"
register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410, 0x80000410, 0x00000005 }"
# Enable DisplayPort Hotplug with 6ms pulse
register "gpu_dp_d_hotplug" = "0x06"
# Enable Panel as LVDS and configure power delays
register "gpu_panel_port_select" = "0" # LVDS
register "gpu_panel_power_cycle_delay" = "5"
register "gpu_panel_power_up_delay" = "300" # T1+T2: 30ms
register "gpu_panel_power_down_delay" = "300" # T5+T6: 30ms
register "gpu_panel_power_backlight_on_delay" = "2000" # T3: 200ms
register "gpu_panel_power_backlight_off_delay" = "2000" # T4: 200ms
register "gfx.use_spread_spectrum_clock" = "1"
register "gfx.link_frequency_270_mhz" = "1"
register "gpu_cpu_backlight" = "0x1155"
register "gpu_pch_backlight" = "0x06100610"
device cpu_cluster 0 on
chip cpu/intel/model_206ax
# Magic APIC ID to locate this chip
device lapic 0x0 on end
device lapic 0xacac off end
register "c1_acpower" = "1" # ACPI(C1) = MWAIT(C1)
register "c2_acpower" = "3" # ACPI(C2) = MWAIT(C3)
register "c3_acpower" = "5" # ACPI(C3) = MWAIT(C7)
register "c1_battery" = "1" # ACPI(C1) = MWAIT(C1)
register "c2_battery" = "3" # ACPI(C2) = MWAIT(C3)
register "c3_battery" = "5" # ACPI(C3) = MWAIT(C7)
end
end
register "pci_mmio_size" = "2048"
device domain 0 on
subsystemid 0x17aa 0x21cf inherit
device pci 00.0 on end # host bridge
device pci 01.0 on end # NVIDIA Corporation GF119M [NVS 4200M]
device pci 02.0 on
subsystemid 0x17aa 0x21d1
end # vga controller
chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH
# GPI routing
# 0 No effect (default)
# 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
# 2 SCI (if corresponding GPIO_EN bit is also set)
register "alt_gp_smi_en" = "0x0000"
register "gpi1_routing" = "2"
register "gpi13_routing" = "2"
# Enable SATA ports 0 (HDD bay) & 1 (ODD bay) & 2 (mSATA) & 3 (eSATA) & 4 (dock)
register "sata_port_map" = "0x1f"
# Set max SATA speed to 6.0 Gb/s
register "sata_interface_speed_support" = "0x3"
register "gen1_dec" = "0x7c1601"
register "gen2_dec" = "0x0c15e1"
register "gen4_dec" = "0x0c06a1"
# Enable zero-based linear PCIe root port functions
register "pcie_port_coalesce" = "1"
register "c2_latency" = "101" # c2 not supported
register "pcie_hotplug_map" = "{ 0, 0, 0, 1, 0, 0, 0, 0 }"
register "spi_uvscc" = "0x2005"
register "spi_lvscc" = "0x2005"
device pci 16.0 on end # Management Engine Interface 1
device pci 16.1 off end
device pci 16.2 off end
device pci 16.3 off end
device pci 19.0 on # Intel Gigabit Ethernet
subsystemid 0x17aa 0x21ce
end
device pci 1a.0 on end # USB2 EHCI #2
device pci 1b.0 on end # High Definition Audio
device pci 1c.0 off end # PCIe Port #1
device pci 1c.1 on end # PCIe Port #2 Integrated Wireless LAN
device pci 1c.2 off end # PCIe Port #3
device pci 1c.3 on
smbios_slot_desc "7" "3" "ExpressCard Slot" "8"
end # PCIe Port #4 Express Card
device pci 1c.4 on end # PCIe Port #5 MMC/SDXC + IEEE1394
device pci 1c.5 off end # PCIe Port #6 Intel Ethernet PHY
device pci 1c.6 off end # PCIe Port #7 USB 3.0 only W520
device pci 1c.7 off end # PCIe Port #8
device pci 1d.0 on end # USB2 EHCI #1
device pci 1e.0 off end # PCI-2-PCI bridge
device pci 1f.0 on #LPC bridge
chip ec/lenovo/pmh7
device pnp ff.1 on end # dummy
register "backlight_enable" = "0x01"
register "dock_event_enable" = "0x01"
end
chip drivers/pc80/tpm
device pnp 0c31.0 on end
end
chip ec/lenovo/h8
device pnp ff.2 on # dummy
io 0x60 = 0x62
io 0x62 = 0x66
io 0x64 = 0x1600
io 0x66 = 0x1604
end
register "config0" = "0xa7"
register "config1" = "0x09"
register "config2" = "0xa0"
register "config3" = "0xc2"
register "beepmask0" = "0x00"
register "beepmask1" = "0x86"
register "has_power_management_beeps" = "0"
register "event2_enable" = "0xff"
register "event3_enable" = "0xff"
register "event4_enable" = "0xd0"
register "event5_enable" = "0xfc"
register "event6_enable" = "0x00"
register "event7_enable" = "0x01"
register "event8_enable" = "0x7b"
register "event9_enable" = "0xff"
register "eventa_enable" = "0x01"
register "eventb_enable" = "0x00"
register "eventc_enable" = "0xff"
register "eventd_enable" = "0xff"
register "evente_enable" = "0x0d"
register "has_bdc_detection" = "1"
register "bdc_gpio_num" = "54"
register "bdc_gpio_lvl" = "0"
register "has_wwan_detection" = "1"
register "wwan_gpio_num" = "70"
register "wwan_gpio_lvl" = "0"
end
chip drivers/lenovo/hybrid_graphics
device pnp ff.f on end # dummy
register "detect_gpio" = "21"
register "has_panel_hybrid_gpio" = "1"
register "panel_hybrid_gpio" = "52"
register "panel_integrated_lvl" = "1"
register "has_backlight_gpio" = "0"
register "has_dgpu_power_gpio" = "0"
register "has_thinker1" = "1"
end
end # LPC bridge
device pci 1f.2 on end # SATA Controller 1
device pci 1f.3 on # SMBUS controller
# eeprom, 8 virtual devices, same chip
chip drivers/i2c/at24rf08c
device i2c 54 on end
device i2c 55 on end
device i2c 56 on end
device i2c 57 on end
device i2c 5c on end
device i2c 5d on end
device i2c 5e on end
device i2c 5f on end
end
end # SMBus
device pci 1f.5 off end # IDE controller
device pci 1f.6 off end # Thermal controller
end
end
end

View File

@ -0,0 +1,16 @@
chip northbridge/intel/sandybridge
device domain 0 on
chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH
device pci 1e.0 off end # PCI-2-PCI bridge
device pci 1f.0 on # LPC bridge
chip ec/lenovo/h8
register "has_wwan_detection" = "1"
register "wwan_gpio_num" = "70"
register "wwan_gpio_lvl" = "0"
end
end # LPC bridge
device pci 1f.5 off end # IDE controller
device pci 1f.6 off end # Thermal controller
end
end
end

View File

@ -0,0 +1,7 @@
chip northbridge/intel/sandybridge
device domain 0 on
chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH
device pci 1c.6 on end # PCIe Port #7 USB 3.0
end
end
end