AGESA f15tn: Hook up IDS options to Kconfig

IDS (Integrated Debug Services) options are meant to be enabled when one
wants to debug AGESA. Since they are compile-time options, using Kconfig
is the logical choice. Currently, none of the options builds.

Tested with BUILD_TIMELESS=1 without adding the configuration options
into the binary, and Asus A88XM-E does not change.

Change-Id: I465627c19c9856e58ca94aa0efedbddb6baaf3f6
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/53985
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>

src/cpu/amd/agesa/family15tn/Kconfig

@@ -2,6 +2,7 @@
 
 config CPU_AMD_AGESA_FAMILY15_TN
 	bool
+	select IDS_OPTIONS_HOOKED_UP
 	select X86_AMD_FIXED_MTRRS
 
 if CPU_AMD_AGESA_FAMILY15_TN

src/vendorcode/amd/agesa/Kconfig

@@ -1,5 +1,61 @@
 # SPDX-License-Identifier: GPL-2.0-only
 
+config IDS_OPTIONS_HOOKED_UP
+	bool
+	help
+	  to Kconfig options.
+	  Historically, IDS configuration was defined in a mainboard-specific
+	  `OptionsIds.h` header. Select this on platforms where IDS config is
+	  hooked up to Kconfig options instead.
+
+if IDS_OPTIONS_HOOKED_UP
+
+config IDS_ENABLED
+	bool "Enable AGESA IDS (Integrated Debug Services) support"
+	default y
+	help
+	  This is the master switch for the IDS sub-system. Use this option to
+	  enable or remove the entire IDS feature set. This switch must be TRUE
+	  for any of the other options to function.
+
+comment "Warning: IDS options may not work. Enable at your own risk!"
+	depends on IDS_ENABLED
+
+config IDS_CONTROL_ENABLED
+	bool "Enable IDS User Interface controls"
+	depends on IDS_ENABLED
+	help
+	  This is the main switch for the IDS configuration controls. This
+	  switch must be TRUE for any of the configuration controls to function.
+
+	  This seems to allow AGESA to retrieve settings from CMOS.
+
+config IDS_PERF_ANALYSIS
+	bool "Enable IDS performance analysis"
+	depends on IDS_ENABLED
+	help
+	  This is the main switch for the IDS performance analysis controls,
+	  macros and support code needed to enable time data gathering. This
+	  switch must be TRUE for any of the performance analysis features to
+	  function.
+
+config IDS_TRACING_ENABLED
+	bool "Enable IDS console"
+	depends on IDS_ENABLED
+	help
+	  This is the main switch for the IDS console controls, macros and
+	  support code needed to enable tracing of algorithms. This switch
+	  must be TRUE for any of the tracing features to function.
+
+config IDS_TRACING_CONSOLE_SERIAL
+	bool "Use serial port as IDS console"
+	depends on IDS_TRACING_ENABLED
+	default DRIVERS_UART_8250IO && CONSOLE_SERIAL
+	help
+	  Use an I/O-mapped serial port to output IDS messages.
+
+endif # IDS_OPTIONS_HOOKED_UP
+
 choice
 	prompt "DDR3 memory profile"
 	default CPU_AMD_AGESA_OPENSOURCE_MEM_JEDEC

src/vendorcode/amd/agesa/f15tn/OptionsIds.h

@@ -1,33 +1,12 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 
-/**
- * @file
- *
- * IDS Option File
- *
- * This file is used to switch on/off IDS features.
- */
 #ifndef _OPTION_IDS_H_
 #define _OPTION_IDS_H_
 
-/**
- * This file generates the defaults tables for the Integrated Debug Support
- * Module. The documented build options are imported from a user controlled
- * file for processing. The build options for the Integrated Debug Support
- * Module are listed below:
- *
- *    IDSOPT_IDS_ENABLED
- *    IDSOPT_ERROR_TRAP_ENABLED
- *    IDSOPT_CONTROL_ENABLED
- *    IDSOPT_TRACING_ENABLED
- *    IDSOPT_PERF_ANALYSIS
- *    IDSOPT_CAR_CORRUPTION_CHECK_ENABLED
- **/
-
-#define IDSOPT_IDS_ENABLED     TRUE
-//#define IDSOPT_CONTROL_ENABLED TRUE
-//#define IDSOPT_TRACING_ENABLED TRUE
-#define IDSOPT_TRACING_CONSOLE_SERIALPORT TRUE
-//#define IDSOPT_PERF_ANALYSIS   TRUE
+#define IDSOPT_IDS_ENABLED			CONFIG(IDS_ENABLED)
+#define IDSOPT_CONTROL_ENABLED			CONFIG(IDS_CONTROL_ENABLED)
+#define IDSOPT_PERF_ANALYSIS			CONFIG(IDS_PERF_ANALYSIS)
+#define IDSOPT_TRACING_ENABLED			CONFIG(IDS_TRACING_ENABLED)
+#define IDSOPT_TRACING_CONSOLE_SERIALPORT	CONFIG(IDS_TRACING_CONSOLE_SERIAL)
 
 #endif