soc/intel/elkhartlake/chip.h: Drop unused members

Remove devicetree options that aren't used anywhere in the code.

Change-Id: I7eace61079e14423325332d277fdda4f986fd133
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64403
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
Angel Pons 2022-05-16 16:32:06 +02:00 committed by Felix Held
parent da541327d2
commit 035c6c8559
1 changed files with 1 additions and 81 deletions

View File

@ -234,21 +234,13 @@ struct soc_intel_elkhartlake_config {
/* Enable if SD Card Power Enable Signal is Active High */ /* Enable if SD Card Power Enable Signal is Active High */
uint8_t SdCardPowerEnableActiveHigh; uint8_t SdCardPowerEnableActiveHigh;
/* Gfx related */ /* HECI related */
uint8_t Heci2Enable; uint8_t Heci2Enable;
uint8_t Heci3Enable; uint8_t Heci3Enable;
/* Gfx related */
uint8_t SkipExtGfxScan;
uint8_t Device4Enable;
/* Enable/Disable EIST. 1b:Enabled, 0b:Disabled */ /* Enable/Disable EIST. 1b:Enabled, 0b:Disabled */
uint8_t eist_enable; uint8_t eist_enable;
/* Enable C6 DRAM */
uint8_t enable_c6dram;
/* /*
* SerialIO device mode selection: * SerialIO device mode selection:
* PchSerialIoDisabled, * PchSerialIoDisabled,
@ -308,9 +300,6 @@ struct soc_intel_elkhartlake_config {
/* GPIO SD card detect pin */ /* GPIO SD card detect pin */
unsigned int sdcard_cd_gpio; unsigned int sdcard_cd_gpio;
/* CNVi BT Audio Offload: Enable/Disable BT Audio Offload. */
bool CnviBtAudioOffload;
/* /*
* Override GPIO PM configuration: * Override GPIO PM configuration:
* 0: Use FSP default GPIO PM program, * 0: Use FSP default GPIO PM program,
@ -356,22 +345,6 @@ struct soc_intel_elkhartlake_config {
uint8_t DdiPort3Ddc; uint8_t DdiPort3Ddc;
uint8_t DdiPort4Ddc; uint8_t DdiPort4Ddc;
/* Hybrid storage mode enable (1) / disable (0)
* This mode makes FSP detect Optane and NVME and set PCIe lane mode
* accordingly */
uint8_t HybridStorageMode;
/*
* Override CPU flex ratio value:
* CPU ratio value controls the maximum processor non-turbo ratio.
* Valid Range 0 to 63.
* In general descriptor provides option to set default cpu flex ratio.
* Default cpu flex ratio 0 ensures booting with non-turbo max frequency.
* That's the reason FSP skips cpu_ratio override if cpu_ratio is 0.
* Only override CPU flex ratio to not boot with non-turbo max.
*/
uint8_t cpu_ratio_override;
/* Skip CPU replacement check /* Skip CPU replacement check
* 0: disable * 0: disable
* 1: enable * 1: enable
@ -404,59 +377,6 @@ struct soc_intel_elkhartlake_config {
unsigned int spread_spectrum; unsigned int spread_spectrum;
} fivr; } fivr;
/*
* SLP_S3 Minimum Assertion Width Policy
* 1 = 60us
* 2 = 1ms
* 3 = 50ms (default)
* 4 = 2s
*/
uint8_t PchPmSlpS3MinAssert;
/*
* SLP_S4 Minimum Assertion Width Policy
* 1 = 1s (default)
* 2 = 2s
* 3 = 3s
* 4 = 4s
*/
uint8_t PchPmSlpS4MinAssert;
/*
* SLP_SUS Minimum Assertion Width Policy
* 1 = 0ms
* 2 = 500ms
* 3 = 1s
* 4 = 4s (default)
*/
uint8_t PchPmSlpSusMinAssert;
/*
* SLP_A Minimum Assertion Width Policy
* 1 = 0ms
* 2 = 4s
* 3 = 98ms
* 4 = 2s (default)
*/
uint8_t PchPmSlpAMinAssert;
/*
* PCH PM Reset Power Cycle Duration
* 0 = 4s (default)
* 1 = 1s
* 2 = 2s
* 3 = 3s
* 4 = 4s
*
* NOTE: Duration programmed in the PchPmPwrCycDur should never be smaller than the
* stretch duration programmed in the following registers:
* - GEN_PMCON_A.SLP_S3_MIN_ASST_WDTH (PchPmSlpS3MinAssert)
* - GEN_PMCON_A.S4MAW (PchPmSlpS4MinAssert)
* - PM_CFG.SLP_A_MIN_ASST_WDTH (PchPmSlpAMinAssert)
* - PM_CFG.SLP_LAN_MIN_ASST_WDTH
*/
uint8_t PchPmPwrCycDur;
/* /*
* PCH power button override period. * PCH power button override period.
* Values: 0x0 - 4s, 0x1 - 6s, 0x2 - 8s, 0x3 - 10s, 0x4 - 12s, 0x5 - 14s * Values: 0x0 - 4s, 0x1 - 6s, 0x2 - 8s, 0x3 - 10s, 0x4 - 12s, 0x5 - 14s