GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

This patch cleans up \r left in the print strings. They were required for romcc code but no longer needed in cache as ram code. 

Signed-off-by: Marc Jones <marc.jones@amd.com>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2657 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Marc Jones 2007-05-10 23:13:18 +00:00 committed by Peter Stuge
parent a909ee6185
commit 03625f4daf
2 changed files with 10 additions and 10 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
src/northbridge/amd/lx/pll_reset.c
View File

@ -30,7 +30,7 @@ static void pll_reset(char manualconf)
print_debug_hex32(msrGlcpSysRstpll.hi);
print_debug(":");
print_debug_hex32(msrGlcpSysRstpll.lo);
print_debug("\r\n");
print_debug("\n");
POST_CODE(POST_PLL_INIT);
if (!(msrGlcpSysRstpll.lo & (1 << RSTPLL_LOWER_SWFLAGS_SHIFT))) {

18
src/northbridge/amd/lx/raminit.c
View File

@ -45,7 +45,7 @@ static void auto_size_dimm(unsigned int dimm)
/* EEPROM byte usage: (5) Number of DIMM Banks */
spd_byte = spd_read_byte(dimm, SPD_NUM_DIMM_BANKS);
if ((MIN_MOD_BANKS > spd_byte) && (spd_byte > MAX_MOD_BANKS)) {
print_debug("Number of module banks not compatible\r\n");
print_debug("Number of module banks not compatible\n");
POST_CODE(ERROR_BANK_SET);
__asm__ __volatile__("hlt\n");
}
@ -55,7 +55,7 @@ static void auto_size_dimm(unsigned int dimm)
/* EEPROM byte usage: (17) Number of Banks on SDRAM Device */
spd_byte = spd_read_byte(dimm, SPD_NUM_BANKS_PER_SDRAM);
if ((MIN_DEV_BANKS > spd_byte) && (spd_byte > MAX_DEV_BANKS)) {
print_debug("Number of device banks not compatible\r\n");
print_debug("Number of device banks not compatible\n");
POST_CODE(ERROR_BANK_SET);
__asm__ __volatile__("hlt\n");
}
@ -70,7 +70,7 @@ static void auto_size_dimm(unsigned int dimm)
*/
if ((spd_read_byte(dimm, SPD_NUM_ROWS) & 0xF0)
|| (spd_read_byte(dimm, SPD_NUM_COLUMNS) & 0xF0)) {
print_debug("Assymetirc DIMM not compatible\r\n");
print_debug("Assymetirc DIMM not compatible\n");
POST_CODE(ERROR_UNSUPPORTED_DIMM);
__asm__ __volatile__("hlt\n");
}
@ -83,7 +83,7 @@ static void auto_size_dimm(unsigned int dimm)
dimm_size <<= (dimm_setting >> CF07_UPPER_D0_MB_SHIFT) & 1; /* shift to multiply by # DIMM banks */
dimm_size = __builtin_ctz(dimm_size);
if (dimm_size > 8) { /* 8 is 1GB only support 1GB per DIMM */
print_debug("Only support up to 1 GB per DIMM\r\n");
print_debug("Only support up to 1 GB per DIMM\n");
POST_CODE(ERROR_DENSITY_DIMM);
__asm__ __volatile__("hlt\n");
}
@ -114,7 +114,7 @@ static void auto_size_dimm(unsigned int dimm)
spd_byte = NumColAddr[spd_read_byte(dimm, SPD_NUM_COLUMNS) & 0xF];
if (spd_byte > MAX_COL_ADDR) {
print_debug("DIMM page size not compatible\r\n");
print_debug("DIMM page size not compatible\n");
POST_CODE(ERROR_SET_PAGE);
__asm__ __volatile__("hlt\n");
}
@ -152,7 +152,7 @@ static void checkDDRMax(void)
/* I don't think you need this check.
if (spd_byte0 < 0xA0 || spd_byte0 < 0xA0){
print_debug("DIMM overclocked. Check GeodeLink Speed\r\n");
print_debug("DIMM overclocked. Check GeodeLink Speed\n");
POST_CODE(POST_PLL_MEM_FAIL);
__asm__ __volatile__("hlt\n");
} */
@ -549,7 +549,7 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl)
}
spd_byte = spd_read_byte(DIMM1, SPD_MODULE_ATTRIBUTES);
if ((spd_byte != 0xFF) && (spd_byte & 3)) {
print_debug("DIMM1 NOT COMPATIBLE\r\n");
print_debug("DIMM1 NOT COMPATIBLE\n");
POST_CODE(ERROR_UNSUPPORTED_DIMM);
__asm__ __volatile__("hlt\n");
}
@ -718,7 +718,7 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl)
msr.lo |= (209 << 8); /* bits[15:8] = 209 */
wrmsr(msrnum, msr);
print_debug("DRAM controller init done.\r\n");
print_debug("DRAM controller init done.\n");
POST_CODE(POST_MEM_SETUP_GOOD); //0x7E
/* make sure there is nothing stale in the cache */
@ -750,6 +750,6 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl)
msr.lo |= 1;
wrmsr(msrnum, msr);
}
print_debug("RAM DLL lock\r\n");
print_debug("RAM DLL lock\n");
}