mb/google/kohaku: Enable stylus pen device

Enabling stylus pen device and pen_eject event.
- Adding enable_gpio for power sequencing
- Configuring GPP_H4 and GPP_H5 as native function
- Adding PENH device node for pen ejection event

BUG=b:137326841
BRANCH=none
TEST=Verified pen input operation and pen_eject event (pop-up and wake
     from s0ix on pen ejection)

Change-Id: Ic252a1f90c0fc6cb9b1e426d75a8b503824681f3
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com>
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34581
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
This commit is contained in:
Seunghwan Kim 2019-07-26 14:45:49 +09:00 committed by Shelley Chen
parent cafbbf5261
commit 042e46f6c8
2 changed files with 24 additions and 12 deletions

View File

@ -24,7 +24,7 @@ static const struct pad_config gpio_table[] = {
/* A6 : SERIRQ ==> NC */ /* A6 : SERIRQ ==> NC */
PAD_NC(GPP_A6, NONE), PAD_NC(GPP_A6, NONE),
/* A10 : PEN_RESET_ODL */ /* A10 : PEN_RESET_ODL */
PAD_CFG_GPO(GPP_A10, 0, DEEP), PAD_CFG_GPO(GPP_A10, 1, DEEP),
/* A17 : PIRQA# ==> NC */ /* A17 : PIRQA# ==> NC */
PAD_NC(GPP_A17, NONE), PAD_NC(GPP_A17, NONE),
/* A18 : ISH_GP0 ==> NC */ /* A18 : ISH_GP0 ==> NC */
@ -39,15 +39,9 @@ static const struct pad_config gpio_table[] = {
PAD_NC(GPP_B8, NONE), PAD_NC(GPP_B8, NONE),
/* C1 : SMBDATA: NC */ /* C1 : SMBDATA: NC */
PAD_NC(GPP_C1, NONE), PAD_NC(GPP_C1, NONE),
/* /* C7 : PEN_IRQ_OD_L */
* C12 : EMR_GARAGE_INT PAD_CFG_GPI_APIC(GPP_C7, NONE, PLTRST, LEVEL, INVERT),
* The same signal is routed to both A8 and C12. Currently C12 /* C15 : EN_PP3300_DIG_DX */
* is the interrupt source, and A8 is the wake source.
* Hoping that GPP_A8 can be used for both interrupt (SCI) and wake
* (GPIO). Keeping as GPI for now.
*/
PAD_CFG_GPI_SCI(GPP_C12, NONE, DEEP, EDGE_SINGLE, INVERT),
/* C15 : EN_PP3300_TSP_DIG_DX */
PAD_CFG_GPO(GPP_C15, 0, DEEP), PAD_CFG_GPO(GPP_C15, 0, DEEP),
/* C23 : UART2_CTS# ==> NC */ /* C23 : UART2_CTS# ==> NC */
PAD_NC(GPP_C23, NONE), PAD_NC(GPP_C23, NONE),
@ -69,6 +63,10 @@ static const struct pad_config gpio_table[] = {
PAD_NC(GPP_G5, NONE), PAD_NC(GPP_G5, NONE),
/* G6 : GPP_G6 ==> NC */ /* G6 : GPP_G6 ==> NC */
PAD_NC(GPP_G6, NONE), PAD_NC(GPP_G6, NONE),
/* H4 : PCH_I2C_PEN_SDA */
PAD_CFG_NF(GPP_H4, NONE, DEEP, NF1),
/* H5 : PCH_I2C_PEN_SCL */
PAD_CFG_NF(GPP_H5, NONE, DEEP, NF1),
}; };
const struct pad_config *override_gpio_table(size_t *num) const struct pad_config *override_gpio_table(size_t *num)

View File

@ -86,12 +86,26 @@ chip soc/intel/cannonlake
register "generic.hid" = ""WCOM50C1"" register "generic.hid" = ""WCOM50C1""
register "generic.desc" = ""WCOM Digitizer"" register "generic.desc" = ""WCOM Digitizer""
register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)" register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A10)" register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C15)"
register "generic.reset_delay_ms" = "1" # TODO: We can't use GPP_A10 as reset_gpio due to its voltage level,
# so we need to reassign it or remove it.
#register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A10)"
#register "generic.reset_delay_ms" = "1"
register "generic.has_power_resource" = "1" register "generic.has_power_resource" = "1"
register "hid_desc_reg_offset" = "0x1" register "hid_desc_reg_offset" = "0x1"
device i2c 0x09 on end device i2c 0x09 on end
end end
chip drivers/generic/gpio_keys
register "name" = ""PENH""
register "gpio" = "ACPI_GPIO_INPUT_ACTIVE_LOW(GPP_A8)"
register "key.wake" = "GPE0_DW0_08"
register "key.wakeup_event_action" = "EV_ACT_DEASSERTED"
register "key.dev_name" = ""EJCT""
register "key.linux_code" = "SW_PEN_INSERTED"
register "key.linux_input_type" = "EV_SW"
register "key.label" = ""pen_eject""
device generic 0 on end
end
end # I2C #2 end # I2C #2
device pci 19.0 on device pci 19.0 on
chip drivers/i2c/da7219 chip drivers/i2c/da7219