mb/google/nissa/var/yaviks: Update devicetree based on FW_CONFIG for yavilla

Yavilla will leverage yaviks FW build.
It has one additional USB Type-A0 port, support stylus and support WWAN.

Here update devicetree based on FW_CONFIG for yavilla's design.
-Enable USB2 port3 and USB3 port1 for USB2/3 Type-A0
-Enable USB2 port5 and USB3 port3 for WWAN
-Enable pen garage
-Enable rear mipi cam
-Enable Synaptics touchpad

BUG=b:277148122, b:276369170
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot

Change-Id: I38dbcf5920d12adb1f84885bdfa4c2f2faf2eb9e
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74261
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>

src/mainboard/google/brya/Kconfig.name

@@ -295,6 +295,9 @@ config BOARD_GOOGLE_YAVIKS
 	select BOARD_GOOGLE_BASEBOARD_NISSA
 	select DRIVERS_GENESYSLOGIC_GL9750
 	select CHROMEOS_WIFI_SAR if CHROMEOS
+	select DRIVERS_GENERIC_GPIO_KEYS
+	select DRIVERS_INTEL_MIPI_CAMERA
+	select HAVE_WWAN_POWER_SEQUENCE
 
 config BOARD_GOOGLE_LISBON
 	bool "->  Lisbon"

src/mainboard/google/brya/variants/yaviks/include/variant/gpio.h

@@ -5,4 +5,8 @@
 
 #include <baseboard/gpio.h>
 
+#define WWAN_FCPO	GPP_D6
+#define WWAN_RST	GPP_F12
+#define T2_OFF_MS	20
+
 #endif

src/mainboard/google/brya/variants/yaviks/overridetree.cb

@@ -2,10 +2,32 @@ fw_config
 	field DB_USB 0 1
 		option DB_NONE			0
 		option DB_1C_1A			1
+		option DB_1C			2
+		option DB_1C_LTE		3
 	end
 	field WIFI_SAR_ID 2 3
 		option SAR_ID_0			0
 	end
+	field STYLUS 9
+		option STYLUS_ABSENT		0
+		option STYLUS_PRESENT		1
+	end
+	field SD_CARD 10
+		option SD_PRESENT		0
+		option SD_ABSENT		1
+	end
+	field WFC 11
+		option WFC_ABSENT		0
+		option WFC_MIPI_OVTI8856	1
+	end
+	field MB_HDMI 12
+		option HDMI_ABSENT		0
+		option HDMI_PRESENT		1
+	end
+	field MB_USB 15
+		option MB_1C			0
+		option MB_1C_2A			1
+	end
 end
 
 chip soc/intel/alderlake
@@ -63,9 +85,12 @@ chip soc/intel/alderlake
 
 	register "typec_aux_bias_pads[0]" = "{.pad_auxp_dc = GPP_E22, .pad_auxn_dc = GPP_E23}"
 
+	register "usb2_ports[4]" = "USB2_PORT_MID(OC_SKIP)"	# USB2 WWAN
 	register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)"	# Bluetooth port for PCIe WLAN
 	register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)"	# Bluetooth port for CNVi WLAN
 
+	register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB3 WWAN
+
 	# Configure external V1P05/Vnn/VnnSx Rails
 	register "ext_fivr_settings" = "{
 		.configure_ext_fivr = 1,
@@ -79,6 +104,7 @@ chip soc/intel/alderlake
 	#|                   | required to set up a BAR  |
 	#|                   | for TPM communication     |
 	#| I2C1              | Touchscreen               |
+	#| I2C2              | WCAM                      |
 	#| I2C3              | Audio                     |
 	#| I2C5              | Trackpad                  |
 	#+-------------------+---------------------------+
@@ -102,6 +128,15 @@ chip soc/intel/alderlake
 				.sda_hold = 30,
 			}
 		},
+		.i2c[2] = {
+			.speed = I2C_SPEED_FAST,
+			.speed_config[0] = {
+				.speed = I2C_SPEED_FAST,
+				.scl_lcnt = 158,
+				.scl_hcnt = 79,
+				.sda_hold = 7,
+			}
+		},
 		.i2c[3] = {
 			.speed = I2C_SPEED_FAST,
 			.speed_config[0] = {
@@ -175,6 +210,20 @@ chip soc/intel/alderlake
 				device generic 0 on end
 			end
 		end
+		device ref ipu on
+			chip drivers/intel/mipi_camera
+				register "acpi_uid" = "0x50000"
+				register "acpi_name" = ""IPU0""
+				register "device_type" = "INTEL_ACPI_CAMERA_CIO2"
+
+				register "cio2_num_ports" = "1"
+				register "cio2_lanes_used" = "{2}" # 2 CSI Camera lanes are used
+				register "cio2_lane_endpoint[0]" = ""^I2C2.CAM0""
+				register "cio2_prt[0]" = "1"
+				device generic 0 on end
+			end
+			probe WFC WFC_MIPI_OVTI8856
+		end
 		device ref i2c1 on
 			chip drivers/i2c/hid
 				register "generic.hid" = ""ELAN2513""
@@ -193,6 +242,23 @@ chip soc/intel/alderlake
 				register "hid_desc_reg_offset" = "0x01"
 				device i2c 10 on end
 			end
+			chip drivers/i2c/hid
+				register "generic.hid" = ""ELAN900C""
+				register "generic.desc" = ""ELAN Touchscreen""
+				register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
+				register "generic.probed" = "1"
+				register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
+				register "generic.reset_delay_ms" = "20"
+				register "generic.reset_off_delay_ms" = "2"
+				register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)"
+				register "generic.stop_delay_ms" = "280"
+				register "generic.stop_off_delay_ms" = "2"
+				register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
+				register "generic.enable_delay_ms" = "1"
+				register "generic.has_power_resource" = "1"
+				register "hid_desc_reg_offset" = "0x01"
+				device i2c 15 on end
+			end
 			chip drivers/i2c/hid
 				register "generic.hid" = ""GTCH7503""
 				register "generic.desc" = ""G2TOUCH Touchscreen""
@@ -208,6 +274,98 @@ chip soc/intel/alderlake
 				register "hid_desc_reg_offset" = "0x01"
 				device i2c 40 on end
 			end
+			chip drivers/generic/gpio_keys
+				register "name" = ""PENH""
+				register "gpio" = "ACPI_GPIO_INPUT_ACTIVE_LOW(GPP_F13)"
+				register "key.wake_gpe" = "GPE0_DW2_15"
+				register "key.wakeup_route" = "WAKEUP_ROUTE_SCI"
+				register "key.wakeup_event_action" = "EV_ACT_DEASSERTED"
+				register "key.dev_name" = ""EJCT""
+				register "key.linux_code" = "SW_PEN_INSERTED"
+				register "key.linux_input_type" = "EV_SW"
+				register "key.label" = ""pen_eject""
+				device generic 0 on
+					probe STYLUS STYLUS_PRESENT
+				end
+			end
+		end
+		device ref i2c2 on
+			chip drivers/intel/mipi_camera
+				register "acpi_hid" = ""OVTI8856""
+				register "acpi_uid" = "0"
+				register "acpi_name" = ""CAM0""
+				register "chip_name" = ""Ov 8856 Camera""
+				register "device_type" = "INTEL_ACPI_CAMERA_SENSOR"
+				register "has_power_resource" = "1"
+
+				register "ssdb.lanes_used" = "2"
+				register "ssdb.link_used" = "1"
+				register "ssdb.vcm_type" = "0x0C"
+				register "vcm_name" = ""VCM0""
+				register "num_freq_entries" = "2"
+				register "link_freq[0]" = "360000000"
+				register "link_freq[1]" = "180000000"
+				register "remote_name" = ""IPU0""
+
+				#Controls
+				register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3"
+				register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ"
+
+				register "gpio_panel.gpio[0].gpio_num" = "GPP_D15"  # EN_PP2800_WCAM_X
+				register "gpio_panel.gpio[1].gpio_num" = "GPP_D16"  # EN_PP1800_PP1200_WCAM_X
+				register "gpio_panel.gpio[2].gpio_num" = "GPP_D3"   # WCAM_RST_L
+
+				#_ON
+				register "on_seq.ops_cnt" = "5"
+				register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)"
+				register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)"
+				register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)"
+				register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)"
+				register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)"
+
+				#_OFF
+				register "off_seq.ops_cnt" = "4"
+				register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)"
+				register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)"
+				register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)"
+				register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
+
+				device i2c 10 on
+					probe WFC WFC_MIPI_OVTI8856
+				end
+			end
+			chip drivers/intel/mipi_camera
+				register "acpi_uid" = "3"
+				register "acpi_name" = ""VCM0""
+				register "chip_name" = ""DW AF DAC""
+				register "device_type" = "INTEL_ACPI_CAMERA_VCM"
+
+				register "pr0" = ""\\_SB.PCI0.I2C2.CAM0.PRIC""
+				register "vcm_compat" = ""dongwoon,dw9714""
+
+				device i2c 0C on
+					probe WFC WFC_MIPI_OVTI8856
+				end
+			end
+			chip drivers/intel/mipi_camera
+				register "acpi_hid" = "ACPI_DT_NAMESPACE_HID"
+				register "acpi_uid" = "1"
+				register "acpi_name" = ""NVM0""
+				register "chip_name" = ""GT24C08""
+				register "device_type" = "INTEL_ACPI_CAMERA_NVM"
+
+				register "pr0" = ""\\_SB.PCI0.I2C2.CAM0.PRIC""
+
+				register "nvm_size" = "0x2000"
+				register "nvm_pagesize" = "1"
+				register "nvm_readonly" = "1"
+				register "nvm_width" = "0x10"
+				register "nvm_compat" = ""atmel,24c08""
+
+				device i2c 50 on
+					probe WFC WFC_MIPI_OVTI8856
+				end
+			end
 		end
 		device ref i2c3 on
 			chip drivers/i2c/generic
@@ -232,6 +390,16 @@ chip soc/intel/alderlake
 				register "detect" = "1"
 				device i2c 15 on end
 			end
+			chip drivers/i2c/hid
+				register "generic.hid" = ""SYNA0000""
+				register "generic.cid" = ""ACPI0C50""
+				register "generic.desc" = ""Synaptics Touchpad""
+				register "generic.irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)"
+				register "generic.wake" = "GPE0_DW2_14"
+				register "generic.detect" = "1"
+				register "hid_desc_reg_offset" = "0x20"
+				device i2c 0x2c on end
+			end
 		end
 		device ref hda on
 			chip drivers/generic/max98357a
@@ -254,6 +422,21 @@ chip soc/intel/alderlake
 				device pci 00.0 on end
 			end
 		end
+		device ref pcie_rp7 on
+			# Enable SD Card PCIe 7 using clk 3
+			register "pch_pcie_rp[PCH_RP(7)]" = "{
+				.clk_src = 3,
+				.clk_req = 3,
+				.flags = PCIE_RP_HOTPLUG | PCIE_RP_LTR | PCIE_RP_AER,
+			}"
+			chip soc/intel/common/block/pcie/rtd3
+				register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_H13)"
+				register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H12)"
+				register "srcclk_pin" = "3"
+				device generic 0 on end
+			end
+			probe SD_CARD SD_PRESENT
+		end
 		device ref emmc on end
 		device ref ish on
 			chip drivers/intel/ish
@@ -322,17 +505,46 @@ chip soc/intel/alderlake
                                                 register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(2, 1))"
 						device ref usb2_port2 on end
 					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-A Port A0 (MLB)""
+						register "type" = "UPC_TYPE_A"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, RIGHT, ACPI_PLD_GROUP(4, 1))"
+						device ref usb2_port3 on
+							probe MB_USB MB_1C_2A
+						end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-A Port A1 (MLB)""
+						register "type" = "UPC_TYPE_A"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, LEFT, ACPI_PLD_GROUP(3, 1))"
+						device ref usb2_port4 on
+							probe MB_USB MB_1C_2A
+						end
+					end
 					chip drivers/usb/acpi
 						register "desc" = ""USB2 Type-A Port A1 (DB)""
 						register "type" = "UPC_TYPE_A"
 						register "use_custom_pld" = "true"
 						register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, RIGHT, ACPI_PLD_GROUP(3, 1))"
-						device ref usb2_port4 on end
+						device ref usb2_port4 on
+							probe DB_USB DB_1C_1A
+						end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 WWAN""
+						register "type" = "UPC_TYPE_INTERNAL"
+						device ref usb2_port5 on
+							probe DB_USB DB_1C_LTE
+						end
 					end
 					chip drivers/usb/acpi
 						register "desc" = ""USB2 UFC""
 						register "type" = "UPC_TYPE_INTERNAL"
-						device ref usb2_port6 on end
+						device ref usb2_port6 on
+							probe WFC WFC_MIPI_OVTI8856
+						end
 					end
 					chip drivers/usb/acpi
 						register "desc" = ""USB2 Bluetooth""
@@ -348,12 +560,39 @@ chip soc/intel/alderlake
 							"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)"
 						device ref usb2_port10 on end
 					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-A Port A0 (MLB)""
+						register "type" = "UPC_TYPE_USB3_A"
+                                                register "use_custom_pld" = "true"
+                                                register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, RIGHT, ACPI_PLD_GROUP(4, 1))"
+						device ref usb3_port1 on
+							probe MB_USB MB_1C_2A
+						end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-A Port A1 (MLB)""
+						register "type" = "UPC_TYPE_USB3_A"
+                                                register "use_custom_pld" = "true"
+                                                register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, LEFT, ACPI_PLD_GROUP(3, 1))"
+						device ref usb3_port2 on
+							probe MB_USB MB_1C_2A
+						end
+					end
 					chip drivers/usb/acpi
 						register "desc" = ""USB3 Type-A Port A1 (DB)""
 						register "type" = "UPC_TYPE_USB3_A"
                                                 register "use_custom_pld" = "true"
                                                 register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, RIGHT, ACPI_PLD_GROUP(3, 1))"
-						device ref usb3_port1 on end
+						device ref usb3_port2 on
+							probe DB_USB DB_1C_1A
+						end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 WWAN""
+						register "type" = "UPC_TYPE_INTERNAL"
+						device ref usb3_port3 on
+							probe DB_USB DB_1C_LTE
+						end
 					end
 				end
 			end