Drop unused and useless CONFIG_MAX_PCI_BUSES.

It was added by rsmith in r2273 on 20060424, when pci_locate_device() in
src/arch/i386/include/arch/romcc_io.h in fact scanned all busses:

 - for(; dev <= PCI_DEV(255, 31, 7); dev += PCI_DEV(0,0,1)) {
 + for(; dev <= PCI_DEV(CONFIG_MAX_PCI_BUSES, 31, 7); dev += PCI_DEV(0,0,1)) {

Today this looks like:

   for(; dev <= PCI_DEV(255|(((1<<CONFIG_PCI_BUS_SEGN_BITS)-1)<<8), 31, 7); dev += PCI_DEV(0,0,1)) {

and CONFIG_MAX_PCI_BUSES is never used anywhere.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Peter Stuge <peter@stuge.se>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4789 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Uwe Hermann 2009-10-16 16:39:40 +00:00
parent 0f61a4fc98
commit 04b9b92952
9 changed files with 0 additions and 65 deletions

View File

@ -562,11 +562,6 @@ define CONFIG_SYS_CLK_FREQ
export used export used
comment "System clock frequency in MHz" comment "System clock frequency in MHz"
end end
define CONFIG_MAX_PCI_BUSES
default 255
export always
comment "Maximum number of PCI buses to search for devices"
end
define CONFIG_EPIA_VT8237R_INIT define CONFIG_EPIA_VT8237R_INIT
default none default none
export used export used

View File

@ -61,7 +61,6 @@ uses CONFIG_UDELAY_TSC
uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
uses CONFIG_PCI_ROM_RUN uses CONFIG_PCI_ROM_RUN
uses CONFIG_CONSOLE_VGA uses CONFIG_CONSOLE_VGA
uses CONFIG_MAX_PCI_BUSES
uses CONFIG_VIDEO_MB uses CONFIG_VIDEO_MB
uses CONFIG_IOAPIC uses CONFIG_IOAPIC
@ -93,11 +92,4 @@ default CONFIG_CROSS_COMPILE = ""
default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32 -fno-stack-protector" default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32 -fno-stack-protector"
default HOSTCC = "gcc" default HOSTCC = "gcc"
##
## Set this to the max PCI bus number you would ever use for PCI config I/O.
## Setting this number very high will make pci_locate_device() take a long
## time when it can't find a device.
##
default CONFIG_MAX_PCI_BUSES = 3
end end

View File

@ -61,7 +61,6 @@ uses CONFIG_UDELAY_TSC
uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
uses CONFIG_PCI_ROM_RUN uses CONFIG_PCI_ROM_RUN
uses CONFIG_CONSOLE_VGA uses CONFIG_CONSOLE_VGA
uses CONFIG_MAX_PCI_BUSES
uses CONFIG_TTYS0_BAUD uses CONFIG_TTYS0_BAUD
uses CONFIG_VIDEO_MB uses CONFIG_VIDEO_MB
uses CONFIG_IOAPIC uses CONFIG_IOAPIC
@ -94,11 +93,4 @@ default CONFIG_CROSS_COMPILE = ""
default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32 -fno-stack-protector" default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32 -fno-stack-protector"
default HOSTCC = "gcc" default HOSTCC = "gcc"
##
## Set this to the max PCI bus number you would ever use for PCI config I/O.
## Setting this number very high will make pci_locate_device() take a long
## time when it can't find a device.
##
default CONFIG_MAX_PCI_BUSES = 3
end end

View File

@ -61,7 +61,6 @@ uses CONFIG_UDELAY_TSC
uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
uses CONFIG_PCI_ROM_RUN uses CONFIG_PCI_ROM_RUN
uses CONFIG_CONSOLE_VGA uses CONFIG_CONSOLE_VGA
uses CONFIG_MAX_PCI_BUSES
uses CONFIG_TTYS0_BAUD uses CONFIG_TTYS0_BAUD
uses CONFIG_VIDEO_MB uses CONFIG_VIDEO_MB
uses CONFIG_IOAPIC uses CONFIG_IOAPIC
@ -94,10 +93,4 @@ default CONFIG_CROSS_COMPILE = ""
default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32 -fno-stack-protector" default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32 -fno-stack-protector"
default HOSTCC = "gcc" default HOSTCC = "gcc"
##
## Set this to the max PCI bus number you would ever use for PCI config I/O.
## Setting this number very high will make pci_locate_device() take a long
## time when it can't find a device.
##
default CONFIG_MAX_PCI_BUSES = 3
end end

View File

@ -41,7 +41,6 @@ uses CONFIG_UDELAY_TSC
uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
uses CONFIG_PCI_ROM_RUN uses CONFIG_PCI_ROM_RUN
uses CONFIG_CONSOLE_VGA uses CONFIG_CONSOLE_VGA
uses CONFIG_MAX_PCI_BUSES
uses CONFIG_TTYS0_BAUD uses CONFIG_TTYS0_BAUD
## CONFIG_ROM_SIZE is the size of boot ROM that this board will use. ## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
@ -127,15 +126,6 @@ default CONFIG_CROSS_COMPILE=""
default CC="$(CONFIG_CROSS_COMPILE)gcc -m32" default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
default HOSTCC="gcc" default HOSTCC="gcc"
##
## Set this to the max PCI bus number you
## would ever use for PCI config IO.
## Setting this number very high will make
## pci_locate_device take a long time when
## it can't find a device.
##
default CONFIG_MAX_PCI_BUSES = 5
default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
default CONFIG_CONSOLE_SERIAL8250=1 default CONFIG_CONSOLE_SERIAL8250=1

View File

@ -59,7 +59,6 @@ uses CONFIG_UDELAY_TSC
uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
uses CONFIG_PCI_ROM_RUN uses CONFIG_PCI_ROM_RUN
uses CONFIG_CONSOLE_VGA uses CONFIG_CONSOLE_VGA
uses CONFIG_MAX_PCI_BUSES
uses CONFIG_TTYS0_BAUD uses CONFIG_TTYS0_BAUD
uses CONFIG_VIDEO_MB uses CONFIG_VIDEO_MB
uses CONFIG_IOAPIC uses CONFIG_IOAPIC
@ -136,11 +135,4 @@ default HOSTCC = "gcc"
default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9 default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
##
## Set this to the max PCI bus number you would ever use for PCI config I/O.
## Setting this number very high will make pci_locate_device() take a long
## time when it can't find a device.
##
default CONFIG_MAX_PCI_BUSES = 3
end end

View File

@ -64,7 +64,6 @@ uses CONFIG_UDELAY_TSC
uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
uses CONFIG_PCI_ROM_RUN uses CONFIG_PCI_ROM_RUN
uses CONFIG_CONSOLE_VGA uses CONFIG_CONSOLE_VGA
uses CONFIG_MAX_PCI_BUSES
uses CONFIG_TTYS0_BAUD uses CONFIG_TTYS0_BAUD
uses CONFIG_VIDEO_MB uses CONFIG_VIDEO_MB
uses CONFIG_IOAPIC uses CONFIG_IOAPIC
@ -109,10 +108,4 @@ default HOSTCC = "gcc"
#default CONFIG_MAINBOARD = "EPIA-N" #default CONFIG_MAINBOARD = "EPIA-N"
default CONFIG_HAVE_MAINBOARD_RESOURCES = 1 default CONFIG_HAVE_MAINBOARD_RESOURCES = 1
##
## Set this to the max PCI bus number you would ever use for PCI config I/O.
## Setting this number very high will make pci_locate_device() take a long
## time when it can't find a device.
##
default CONFIG_MAX_PCI_BUSES = 3
end end

View File

@ -62,7 +62,6 @@ uses CONFIG_UDELAY_TSC
uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
uses CONFIG_PCI_ROM_RUN uses CONFIG_PCI_ROM_RUN
uses CONFIG_CONSOLE_VGA uses CONFIG_CONSOLE_VGA
uses CONFIG_MAX_PCI_BUSES
uses CONFIG_TTYS0_BAUD uses CONFIG_TTYS0_BAUD
uses CONFIG_TTYS0_BASE uses CONFIG_TTYS0_BASE
uses CONFIG_TTYS0_LCS uses CONFIG_TTYS0_LCS
@ -101,7 +100,6 @@ default CONFIG_ROM_PAYLOAD = 1
default CONFIG_CROSS_COMPILE = "" default CONFIG_CROSS_COMPILE = ""
default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32 -fno-stack-protector" default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32 -fno-stack-protector"
default HOSTCC = "gcc" default HOSTCC = "gcc"
default CONFIG_MAX_PCI_BUSES = 3
default CONFIG_CONSOLE_SERIAL8250 = 1 default CONFIG_CONSOLE_SERIAL8250 = 1
default CONFIG_TTYS0_BAUD = 115200 default CONFIG_TTYS0_BAUD = 115200
default CONFIG_TTYS0_BASE = 0x3f8 default CONFIG_TTYS0_BASE = 0x3f8

View File

@ -72,7 +72,6 @@ uses CONFIG_UDELAY_TSC
uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
uses CONFIG_PCI_ROM_RUN uses CONFIG_PCI_ROM_RUN
uses CONFIG_CONSOLE_VGA uses CONFIG_CONSOLE_VGA
uses CONFIG_MAX_PCI_BUSES
uses CONFIG_SMP uses CONFIG_SMP
uses CONFIG_IOAPIC uses CONFIG_IOAPIC
@ -184,15 +183,6 @@ default CONFIG_CROSS_COMPILE=""
default CC="$(CONFIG_CROSS_COMPILE)gcc -m32" default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
default HOSTCC="gcc" default HOSTCC="gcc"
##
## Set this to the max PCI bus number you
## would ever use for PCI config IO.
## Setting this number very high will make
## pci_locate_device take a long time when
## it can't find a device.
##
default CONFIG_MAX_PCI_BUSES = 0x80
## ##
## Disable the gdb stub by default ## Disable the gdb stub by default
## ##