mb/prodrive/hermes: Remove overridetree
There's no need to have an overridetree with a single board variant. TEST=Compare static.c and observe only device order has changed. Change-Id: I2097e247c27d5d0c5479cb533b477cd490a4c827 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58367 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This commit is contained in:
Angel Pons
parent
57f09803bb
commit
0515aa1978
|
|
@ -51,9 +51,6 @@ config MAX_CPUS
|
|||
int
|
||||
default 16
|
||||
|
||||
config OVERRIDE_DEVICETREE
|
||||
default "variants/\$(CONFIG_VARIANT_DIR)/overridetree.cb"
|
||||
|
||||
config CONSOLE_POST
|
||||
bool
|
||||
default y
|
||||
|
|
|
|||
|
|
@ -1,4 +1,132 @@
|
|||
chip soc/intel/cannonlake
|
||||
# FSP configuration
|
||||
|
||||
register "SataMode" = "0" # AHCI
|
||||
register "SataSalpSupport" = "0"
|
||||
register "satapwroptimize" = "1"
|
||||
register "SataPortsDevSlp[1]" = "1" # PCH_M2_SATA_DEVSLP1
|
||||
|
||||
register "SataPortsEnable[0]" = "1"
|
||||
register "SataPortsEnable[1]" = "1" # depends on SATAXPCIE1
|
||||
register "SataPortsEnable[2]" = "0" # Not used for SATA
|
||||
register "SataPortsEnable[3]" = "0" # Not used for SATA
|
||||
register "SataPortsEnable[4]" = "1"
|
||||
register "SataPortsEnable[5]" = "1"
|
||||
register "SataPortsEnable[6]" = "1"
|
||||
register "SataPortsEnable[7]" = "1"
|
||||
|
||||
register "SataPortsHotPlug[0]" = "1"
|
||||
register "SataPortsHotPlug[1]" = "1"
|
||||
register "SataPortsHotPlug[2]" = "0"
|
||||
register "SataPortsHotPlug[3]" = "0"
|
||||
register "SataPortsHotPlug[4]" = "1"
|
||||
register "SataPortsHotPlug[5]" = "1"
|
||||
register "SataPortsHotPlug[6]" = "1"
|
||||
register "SataPortsHotPlug[7]" = "1"
|
||||
|
||||
register "PchHdaDspEnable" = "0"
|
||||
register "PchHdaAudioLinkHda" = "1"
|
||||
|
||||
# Controls the CLKREQ, not the output directly.
|
||||
# Depends on the CLKREQ to CLK gen mapping below
|
||||
register "PcieClkSrcUsage[0]" = "PCIE_CLK_FREE" # BMC, PCIe Slot1, Slot2, Slot4, Slot6
|
||||
register "PcieClkSrcUsage[1]" = "PCIE_CLK_FREE" # PHY3
|
||||
register "PcieClkSrcUsage[2]" = "PCIE_CLK_NOTUSED"
|
||||
register "PcieClkSrcUsage[3]" = "PCIE_CLK_NOTUSED"
|
||||
register "PcieClkSrcUsage[4]" = "PCIE_CLK_FREE" # RP9 M2 Slot M x4
|
||||
register "PcieClkSrcUsage[5]" = "PCIE_CLK_FREE" # RP16 M2 Slot E x1
|
||||
register "PcieClkSrcUsage[6]" = "PCIE_CLK_NOTUSED"
|
||||
register "PcieClkSrcUsage[7]" = "PCIE_CLK_NOTUSED"
|
||||
register "PcieClkSrcUsage[8]" = "PCIE_CLK_NOTUSED"
|
||||
register "PcieClkSrcUsage[9]" = "PCIE_CLK_NOTUSED"
|
||||
register "PcieClkSrcUsage[10]" = "PCIE_CLK_NOTUSED"
|
||||
register "PcieClkSrcUsage[11]" = "PCIE_CLK_NOTUSED"
|
||||
register "PcieClkSrcUsage[12]" = "PCIE_CLK_NOTUSED"
|
||||
register "PcieClkSrcUsage[13]" = "PCIE_CLK_FREE" # PHY 0, PHY 1, PHY 2, PHY 4
|
||||
register "PcieClkSrcUsage[14]" = "PCIE_CLK_FREE" # PB
|
||||
register "PcieClkSrcUsage[15]" = "PCIE_CLK_FREE" # PCIe Slot3
|
||||
|
||||
# Only map M2 CLKREQ to CLK gen
|
||||
register "PcieClkSrcClkReq[4]" = "4" # M2_M_CLK_REQ_n
|
||||
register "PcieClkSrcClkReq[5]" = "5" # M2_E_CLK_REQ_n
|
||||
|
||||
# USB OC5-7: not connected
|
||||
register "usb2_ports" = "{
|
||||
|
||||
#define HERMES_USB2_CONFIG(pin) { \
|
||||
.enable = 1, \
|
||||
.ocpin = (pin), \
|
||||
.tx_bias = USB2_BIAS_0MV, \
|
||||
.tx_emp_enable = USB2_DE_EMP_ON_PRE_EMP_ON, \
|
||||
.pre_emp_bias = USB2_BIAS_28P15MV, \
|
||||
.pre_emp_bit = USB2_FULL_BIT_PRE_EMP, \
|
||||
}
|
||||
[0] = HERMES_USB2_CONFIG(OC0), /* USB3 rear panel 1 */
|
||||
[1] = HERMES_USB2_CONFIG(OC0),
|
||||
[2] = HERMES_USB2_CONFIG(OC1), /* USB3 rear panel 2 */
|
||||
[3] = HERMES_USB2_CONFIG(OC1),
|
||||
[4] = HERMES_USB2_CONFIG(OC2), /* USB3 internal header CN_USB3_HDR */
|
||||
[5] = HERMES_USB2_CONFIG(OC2),
|
||||
[6] = HERMES_USB2_CONFIG(OC3), /* USB2 internal header USB2_HDR1 */
|
||||
[7] = HERMES_USB2_CONFIG(OC3),
|
||||
[8] = HERMES_USB2_CONFIG(OC4), /* USB2 internal header USB2_HDR1 */
|
||||
[9] = HERMES_USB2_CONFIG(OC4),
|
||||
[10] = HERMES_USB2_CONFIG(OC_SKIP), /* BMC */
|
||||
[11] = USB2_PORT_EMPTY,
|
||||
[12] = HERMES_USB2_CONFIG(OC_SKIP), /* piggy-back */
|
||||
[13] = HERMES_USB2_CONFIG(OC_SKIP), /* M.2 key E */
|
||||
}"
|
||||
|
||||
# USB Config 2.0/3.0
|
||||
# Enumeration starts at 0
|
||||
# USB 3.0
|
||||
# USB OC0: RP1
|
||||
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)"
|
||||
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)"
|
||||
|
||||
# USB OC1: RP2
|
||||
register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC1)"
|
||||
register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC1)"
|
||||
|
||||
# USB OC2: Internal Header CN_USB3_HDR
|
||||
register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC2)"
|
||||
register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC2)"
|
||||
|
||||
# Thermal
|
||||
register "tcc_offset" = "1" # TCC of 99C
|
||||
|
||||
# Disable S0ix
|
||||
register "s0ix_enable" = "0"
|
||||
|
||||
# Enable Turbo
|
||||
register "eist_enable" = "1"
|
||||
|
||||
register "common_soc_config" = "{
|
||||
.gspi[0] = {
|
||||
.speed_mhz = 1,
|
||||
.early_init = 1,
|
||||
},
|
||||
}"
|
||||
|
||||
# VR Power Delivery Design
|
||||
register "VrPowerDeliveryDesign" = "0x12"
|
||||
|
||||
register "SerialIoDevMode" = "{
|
||||
[PchSerialIoIndexI2C0] = PchSerialIoDisabled,
|
||||
[PchSerialIoIndexI2C1] = PchSerialIoDisabled,
|
||||
[PchSerialIoIndexI2C2] = PchSerialIoDisabled,
|
||||
[PchSerialIoIndexI2C3] = PchSerialIoDisabled,
|
||||
[PchSerialIoIndexI2C4] = PchSerialIoDisabled,
|
||||
[PchSerialIoIndexI2C5] = PchSerialIoDisabled,
|
||||
[PchSerialIoIndexSPI0] = PchSerialIoPci,
|
||||
[PchSerialIoIndexSPI1] = PchSerialIoDisabled,
|
||||
[PchSerialIoIndexUART0] = PchSerialIoPci,
|
||||
[PchSerialIoIndexUART1] = PchSerialIoPci,
|
||||
[PchSerialIoIndexUART2] = PchSerialIoPci,
|
||||
}"
|
||||
|
||||
register "DisableHeciRetry" = "1"
|
||||
|
||||
device cpu_cluster 0 on
|
||||
device lapic 0 on end
|
||||
end
|
||||
|
|
@ -14,24 +142,86 @@ chip soc/intel/cannonlake
|
|||
device pci 01.2 on # PEG x4 or disabled / Slot 4
|
||||
smbios_slot_desc "SlotTypePciExpressGen3X16" "SlotLengthOther" "SLOT4" "SlotDataBusWidth4X"
|
||||
end
|
||||
device pci 02.0 on end # Integrated Graphics Device
|
||||
device pci 04.0 on end # SA Thermal device
|
||||
device pci 08.0 on end # Gaussian Mixture
|
||||
device pci 12.0 on end # Thermal Subsystem
|
||||
device pci 14.0 on end # USB xHCI
|
||||
device pci 14.1 off end # USB xDCI (OTG)
|
||||
device pci 14.2 on end # RAM controller
|
||||
device pci 14.3 on
|
||||
chip drivers/wifi/generic
|
||||
register "wake" = "PME_B0_EN_BIT"
|
||||
device generic 0 on end
|
||||
end
|
||||
end # CNVi wifi
|
||||
device pci 14.5 off end # SDCard
|
||||
|
||||
device pci 16.0 on end # Management Engine Interface 1
|
||||
device pci 16.1 on end # Management Engine Interface 2
|
||||
device pci 16.4 off end # Management Engine Interface 3
|
||||
device pci 17.0 on end # SATA
|
||||
device pci 1d.6 on # PCIe root port 15
|
||||
# This device does not have any function on CNP-H, but it needs
|
||||
# to be here so that the resource allocator is aware of UART 2.
|
||||
device pci 19.0 hidden end
|
||||
chip soc/intel/common/block/uart
|
||||
device pci 19.2 hidden
|
||||
register "devid" = "PCI_DEVICE_ID_INTEL_CNP_H_UART2"
|
||||
end # UART #2, in ACPI mode
|
||||
end
|
||||
device pci 1b.4 on # PCIe root port 21 (Slot 1)
|
||||
smbios_slot_desc "SlotTypePciExpressGen3X16" "SlotLengthOther" "SLOT1" "SlotDataBusWidth4X"
|
||||
register "PcieRpEnable[20]" = "1"
|
||||
register "PcieRpLtrEnable[20]" = "1"
|
||||
register "PcieRpSlotImplemented[20]" = "1"
|
||||
register "PcieRpMaxPayload[20]" = "RpMaxPayload_256"
|
||||
register "PcieRpAdvancedErrorReporting[20]" = "1"
|
||||
register "PcieRpAspm[20]" = "AspmDisabled"
|
||||
end
|
||||
device pci 1c.0 on # PCIe root port 1 (Slot 3)
|
||||
smbios_slot_desc "SlotTypePciExpressGen3X16" "SlotLengthOther" "SLOT3" "SlotDataBusWidth4X"
|
||||
register "PcieRpEnable[0]" = "1"
|
||||
register "PcieRpLtrEnable[0]" = "1"
|
||||
register "PcieRpSlotImplemented[0]" = "1"
|
||||
register "PcieRpMaxPayload[0]" = "RpMaxPayload_256"
|
||||
register "PcieRpAdvancedErrorReporting[0]" = "1"
|
||||
register "PcieRpAspm[0]" = "AspmDisabled"
|
||||
end
|
||||
device pci 1c.4 on # PCIe root port 5 (PHY 3)
|
||||
register "PcieRpEnable[4]" = "1"
|
||||
end
|
||||
device pci 1c.5 on # PCIe root port 6 (PHY 4)
|
||||
register "PcieRpEnable[5]" = "1"
|
||||
end
|
||||
device pci 1c.6 on # PCIe root port 7 (PHY 2)
|
||||
register "PcieRpEnable[6]" = "1"
|
||||
end
|
||||
device pci 1c.7 on # PCIe root port 8 (PHY 1)
|
||||
register "PcieRpEnable[7]" = "1"
|
||||
end
|
||||
device pci 1d.0 on # PCIe root port 9 (M2 M)
|
||||
smbios_slot_desc "SlotTypePciExpressGen3X16" "SlotLengthOther" "M2 M" "SlotDataBusWidth4X"
|
||||
register "PcieRpEnable[8]" = "1"
|
||||
register "PcieRpSlotImplemented[8]" = "1"
|
||||
end
|
||||
device pci 1d.5 on # PCIe root port 14 (PHY 0)
|
||||
register "PcieRpEnable[13]" = "1"
|
||||
end
|
||||
device pci 1d.6 on # PCIe root port 15 (BMC)
|
||||
device pci 00.0 on # Aspeed PCI Bridge
|
||||
device pci 00.0 on end # Aspeed 2500 VGA
|
||||
end
|
||||
register "PcieRpEnable[14]" = "1"
|
||||
register "PcieRpSlotImplemented[14]" = "1"
|
||||
end
|
||||
device pci 1d.7 on # PCIe root port 16 (M.2 E/CNVi)
|
||||
# Disabled when CNVi is present
|
||||
register "PcieRpEnable[15]" = "1"
|
||||
register "PcieRpSlotImplemented[15]" = "1"
|
||||
end
|
||||
device pci 1e.0 on end # UART #0
|
||||
device pci 1e.1 on end # UART #1
|
||||
device pci 1e.2 off end # GSPI #0
|
||||
device pci 1e.3 off end # GSPI #1
|
||||
device pci 1f.0 on # LPC Interface
|
||||
chip drivers/pc80/tpm
|
||||
device pnp 0c31.0 on end
|
||||
|
|
@ -44,5 +234,4 @@ chip soc/intel/cannonlake
|
|||
device pci 1f.4 on end # SMBus
|
||||
device pci 1f.5 on end # PCH SPI
|
||||
end
|
||||
|
||||
end
|
||||
|
|
|
|||
|
|
@ -1,204 +0,0 @@
|
|||
chip soc/intel/cannonlake
|
||||
|
||||
device cpu_cluster 0 on
|
||||
device lapic 0 on end
|
||||
end
|
||||
|
||||
# FSP configuration
|
||||
|
||||
register "SataMode" = "0" # AHCI
|
||||
register "SataSalpSupport" = "0"
|
||||
register "satapwroptimize" = "1"
|
||||
register "SataPortsDevSlp[1]" = "1" # PCH_M2_SATA_DEVSLP1
|
||||
|
||||
register "SataPortsEnable[0]" = "1"
|
||||
register "SataPortsEnable[1]" = "1" # depends on SATAXPCIE1
|
||||
register "SataPortsEnable[2]" = "0" # Not used for SATA
|
||||
register "SataPortsEnable[3]" = "0" # Not used for SATA
|
||||
register "SataPortsEnable[4]" = "1"
|
||||
register "SataPortsEnable[5]" = "1"
|
||||
register "SataPortsEnable[6]" = "1"
|
||||
register "SataPortsEnable[7]" = "1"
|
||||
|
||||
register "SataPortsHotPlug[0]" = "1"
|
||||
register "SataPortsHotPlug[1]" = "1"
|
||||
register "SataPortsHotPlug[2]" = "0"
|
||||
register "SataPortsHotPlug[3]" = "0"
|
||||
register "SataPortsHotPlug[4]" = "1"
|
||||
register "SataPortsHotPlug[5]" = "1"
|
||||
register "SataPortsHotPlug[6]" = "1"
|
||||
register "SataPortsHotPlug[7]" = "1"
|
||||
|
||||
register "PchHdaDspEnable" = "0"
|
||||
register "PchHdaAudioLinkHda" = "1"
|
||||
|
||||
# Controls the CLKREQ, not the output directly.
|
||||
# Depends on the CLKREQ to CLK gen mapping below
|
||||
register "PcieClkSrcUsage[0]" = "PCIE_CLK_FREE" # BMC, PCIe Slot1, Slot2, Slot4, Slot6
|
||||
register "PcieClkSrcUsage[1]" = "PCIE_CLK_FREE" # PHY3
|
||||
register "PcieClkSrcUsage[2]" = "PCIE_CLK_NOTUSED"
|
||||
register "PcieClkSrcUsage[3]" = "PCIE_CLK_NOTUSED"
|
||||
register "PcieClkSrcUsage[4]" = "PCIE_CLK_FREE" # RP9 M2 Slot M x4
|
||||
register "PcieClkSrcUsage[5]" = "PCIE_CLK_FREE" # RP16 M2 Slot E x1
|
||||
register "PcieClkSrcUsage[6]" = "PCIE_CLK_NOTUSED"
|
||||
register "PcieClkSrcUsage[7]" = "PCIE_CLK_NOTUSED"
|
||||
register "PcieClkSrcUsage[8]" = "PCIE_CLK_NOTUSED"
|
||||
register "PcieClkSrcUsage[9]" = "PCIE_CLK_NOTUSED"
|
||||
register "PcieClkSrcUsage[10]" = "PCIE_CLK_NOTUSED"
|
||||
register "PcieClkSrcUsage[11]" = "PCIE_CLK_NOTUSED"
|
||||
register "PcieClkSrcUsage[12]" = "PCIE_CLK_NOTUSED"
|
||||
register "PcieClkSrcUsage[13]" = "PCIE_CLK_FREE" # PHY 0, PHY 1, PHY 2, PHY 4
|
||||
register "PcieClkSrcUsage[14]" = "PCIE_CLK_FREE" # PB
|
||||
register "PcieClkSrcUsage[15]" = "PCIE_CLK_FREE" # PCIe Slot3
|
||||
|
||||
# Only map M2 CLKREQ to CLK gen
|
||||
register "PcieClkSrcClkReq[4]" = "4" # M2_M_CLK_REQ_n
|
||||
register "PcieClkSrcClkReq[5]" = "5" # M2_E_CLK_REQ_n
|
||||
|
||||
# USB OC5-7: not connected
|
||||
register "usb2_ports" = "{
|
||||
|
||||
#define HERMES_USB2_CONFIG(pin) { \
|
||||
.enable = 1, \
|
||||
.ocpin = (pin), \
|
||||
.tx_bias = USB2_BIAS_0MV, \
|
||||
.tx_emp_enable = USB2_DE_EMP_ON_PRE_EMP_ON, \
|
||||
.pre_emp_bias = USB2_BIAS_28P15MV, \
|
||||
.pre_emp_bit = USB2_FULL_BIT_PRE_EMP, \
|
||||
}
|
||||
[0] = HERMES_USB2_CONFIG(OC0), /* USB3 rear panel 1 */
|
||||
[1] = HERMES_USB2_CONFIG(OC0),
|
||||
[2] = HERMES_USB2_CONFIG(OC1), /* USB3 rear panel 2 */
|
||||
[3] = HERMES_USB2_CONFIG(OC1),
|
||||
[4] = HERMES_USB2_CONFIG(OC2), /* USB3 internal header CN_USB3_HDR */
|
||||
[5] = HERMES_USB2_CONFIG(OC2),
|
||||
[6] = HERMES_USB2_CONFIG(OC3), /* USB2 internal header USB2_HDR1 */
|
||||
[7] = HERMES_USB2_CONFIG(OC3),
|
||||
[8] = HERMES_USB2_CONFIG(OC4), /* USB2 internal header USB2_HDR1 */
|
||||
[9] = HERMES_USB2_CONFIG(OC4),
|
||||
[10] = HERMES_USB2_CONFIG(OC_SKIP), /* BMC */
|
||||
[11] = USB2_PORT_EMPTY,
|
||||
[12] = HERMES_USB2_CONFIG(OC_SKIP), /* piggy-back */
|
||||
[13] = HERMES_USB2_CONFIG(OC_SKIP), /* M.2 key E */
|
||||
}"
|
||||
|
||||
# USB Config 2.0/3.0
|
||||
# Enumeration starts at 0
|
||||
# USB 3.0
|
||||
# USB OC0: RP1
|
||||
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)"
|
||||
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)"
|
||||
|
||||
# USB OC1: RP2
|
||||
register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC1)"
|
||||
register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC1)"
|
||||
|
||||
# USB OC2: Internal Header CN_USB3_HDR
|
||||
register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC2)"
|
||||
register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC2)"
|
||||
|
||||
# Thermal
|
||||
register "tcc_offset" = "1" # TCC of 99C
|
||||
|
||||
|
||||
# Disable S0ix
|
||||
register "s0ix_enable" = "0"
|
||||
|
||||
# Enable Turbo
|
||||
register "eist_enable" = "1"
|
||||
|
||||
register "common_soc_config" = "{
|
||||
.gspi[0] = {
|
||||
.speed_mhz = 1,
|
||||
.early_init = 1,
|
||||
},
|
||||
}"
|
||||
|
||||
# VR Power Delivery Design
|
||||
register "VrPowerDeliveryDesign" = "0x12"
|
||||
|
||||
register "SerialIoDevMode" = "{
|
||||
[PchSerialIoIndexI2C0] = PchSerialIoDisabled,
|
||||
[PchSerialIoIndexI2C1] = PchSerialIoDisabled,
|
||||
[PchSerialIoIndexI2C2] = PchSerialIoDisabled,
|
||||
[PchSerialIoIndexI2C3] = PchSerialIoDisabled,
|
||||
[PchSerialIoIndexI2C4] = PchSerialIoDisabled,
|
||||
[PchSerialIoIndexI2C5] = PchSerialIoDisabled,
|
||||
[PchSerialIoIndexSPI0] = PchSerialIoPci,
|
||||
[PchSerialIoIndexSPI1] = PchSerialIoDisabled,
|
||||
[PchSerialIoIndexUART0] = PchSerialIoPci,
|
||||
[PchSerialIoIndexUART1] = PchSerialIoPci,
|
||||
[PchSerialIoIndexUART2] = PchSerialIoPci,
|
||||
}"
|
||||
|
||||
register "DisableHeciRetry" = "1"
|
||||
|
||||
device domain 0 on
|
||||
device pci 02.0 on end # Integrated Graphics Device
|
||||
device pci 14.3 on
|
||||
chip drivers/wifi/generic
|
||||
register "wake" = "PME_B0_EN_BIT"
|
||||
device generic 0 on end
|
||||
end
|
||||
end # CNVi wifi
|
||||
|
||||
# This device does not have any function on CNP-H, but it needs
|
||||
# to be here so that the resource allocator is aware of UART 2.
|
||||
device pci 19.0 hidden end
|
||||
chip soc/intel/common/block/uart
|
||||
device pci 19.2 hidden
|
||||
register "devid" = "PCI_DEVICE_ID_INTEL_CNP_H_UART2"
|
||||
end # UART #2, in ACPI mode
|
||||
end
|
||||
device pci 1b.4 on # PCIe root port 21 (Slot 1)
|
||||
smbios_slot_desc "SlotTypePciExpressGen3X16" "SlotLengthOther" "SLOT1" "SlotDataBusWidth4X"
|
||||
register "PcieRpEnable[20]" = "1"
|
||||
register "PcieRpLtrEnable[20]" = "1"
|
||||
register "PcieRpSlotImplemented[20]" = "1"
|
||||
register "PcieRpMaxPayload[20]" = "RpMaxPayload_256"
|
||||
register "PcieRpAdvancedErrorReporting[20]" = "1"
|
||||
register "PcieRpAspm[20]" = "AspmDisabled"
|
||||
end
|
||||
device pci 1c.0 on # PCIe root port 1 (Slot 3)
|
||||
smbios_slot_desc "SlotTypePciExpressGen3X16" "SlotLengthOther" "SLOT3" "SlotDataBusWidth4X"
|
||||
register "PcieRpEnable[0]" = "1"
|
||||
register "PcieRpLtrEnable[0]" = "1"
|
||||
register "PcieRpSlotImplemented[0]" = "1"
|
||||
register "PcieRpMaxPayload[0]" = "RpMaxPayload_256"
|
||||
register "PcieRpAdvancedErrorReporting[0]" = "1"
|
||||
register "PcieRpAspm[0]" = "AspmDisabled"
|
||||
end
|
||||
device pci 1c.4 on # PCIe root port 5 (PHY 3)
|
||||
register "PcieRpEnable[4]" = "1"
|
||||
end
|
||||
device pci 1c.5 on # PCIe root port 6 (PHY 4)
|
||||
register "PcieRpEnable[5]" = "1"
|
||||
end
|
||||
device pci 1c.6 on # PCIe root port 7 (PHY 2)
|
||||
register "PcieRpEnable[6]" = "1"
|
||||
end
|
||||
device pci 1c.7 on # PCIe root port 8 (PHY 1)
|
||||
register "PcieRpEnable[7]" = "1"
|
||||
end
|
||||
device pci 1d.0 on # PCIe root port 9 (M2 M)
|
||||
smbios_slot_desc "SlotTypePciExpressGen3X16" "SlotLengthOther" "M2 M" "SlotDataBusWidth4X"
|
||||
register "PcieRpEnable[8]" = "1"
|
||||
register "PcieRpSlotImplemented[8]" = "1"
|
||||
end
|
||||
device pci 1d.5 on # PCIe root port 14 (PHY 0)
|
||||
register "PcieRpEnable[13]" = "1"
|
||||
end
|
||||
device pci 1d.6 on # PCIe root port 15 (BMC)
|
||||
register "PcieRpEnable[14]" = "1"
|
||||
end
|
||||
device pci 1d.7 on # PCIe root port 16 (M.2 E/CNVi)
|
||||
# Disabled when CNVi is present
|
||||
register "PcieRpEnable[15]" = "1"
|
||||
register "PcieRpSlotImplemented[15]" = "1"
|
||||
end
|
||||
device pci 1e.0 on end # UART #0
|
||||
device pci 1e.1 on end # UART #1
|
||||
device pci 1e.2 off end # GSPI #0
|
||||
device pci 1e.3 off end # GSPI #1
|
||||
end
|
||||
end
|
||||
Loading…
Reference in New Issue