mb/hp: Add Z220 SFF workstation
* Add initial board commit based on HP8200 SFF. * Add documentation. * Serial and PCIe slot are working. Tested on HP Z220. Change-Id: I75987a7ea9a008a64281f0d5ab27e5148d36a4ec Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33207 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
Patrick Rudolph
Felix Held
parent
f972322368
commit
05284b64d0
|
|
@ -0,0 +1,70 @@
|
|||
# HP Z220 SFF Workstation
|
||||
|
||||
This page describes how to run coreboot on the [HP Z220 SFF Workstation] desktop
|
||||
from [HP].
|
||||
|
||||
## TODO
|
||||
|
||||
The following things are still missing from this coreboot port:
|
||||
|
||||
- Extended HWM reporting
|
||||
- Advanced LED control
|
||||
- Advanced power configuration in S3
|
||||
|
||||
## Flashing coreboot
|
||||
|
||||
```eval_rst
|
||||
+---------------------+-------------+
|
||||
| Type | Value |
|
||||
+=====================+=============+
|
||||
| Socketed flash | no |
|
||||
+---------------------+-------------+
|
||||
| Model | N25Q128..3E |
|
||||
+---------------------+-------------+
|
||||
| Size | 16 MiB |
|
||||
+---------------------+-------------+
|
||||
| In circuit flashing | yes |
|
||||
+---------------------+-------------+
|
||||
| Package | SOIC-16 |
|
||||
+---------------------+-------------+
|
||||
| Write protection | No |
|
||||
+---------------------+-------------+
|
||||
| Dual BIOS feature | No |
|
||||
+---------------------+-------------+
|
||||
| Internal flashing | yes |
|
||||
+---------------------+-------------+
|
||||
```
|
||||
|
||||
### Internal programming
|
||||
|
||||
The SPI flash can be accessed using [flashrom].
|
||||
|
||||
### External programming
|
||||
|
||||
External programming with an SPI adapter and [flashrom] does work, but it powers the
|
||||
whole southbridge complex. You need to supply enough current through the programming adapter.
|
||||
|
||||
If you want to use a SOIC pomona test clip, you have to cut the 2nd DRAM DIMM holder,
|
||||
as otherwise there's not enough space near the flash.
|
||||
|
||||
## Technology
|
||||
|
||||
```eval_rst
|
||||
+------------------+--------------------------------------------------+
|
||||
| Northbridge | :doc:`../../northbridge/intel/sandybridge/index` |
|
||||
+------------------+--------------------------------------------------+
|
||||
| Southbridge | bd82x6x |
|
||||
+------------------+--------------------------------------------------+
|
||||
| CPU | model_206ax |
|
||||
+------------------+--------------------------------------------------+
|
||||
| SuperIO | :doc:`../../superio/nuvoton/npcd378` |
|
||||
+------------------+--------------------------------------------------+
|
||||
| EC | |
|
||||
+------------------+--------------------------------------------------+
|
||||
| Coprocessor | Intel ME |
|
||||
+------------------+--------------------------------------------------+
|
||||
```
|
||||
|
||||
[HP Z220 SFF Workstation]: https://support.hp.com/za-en/document/c03386950
|
||||
[HP]: https://www.hp.com/
|
||||
[flashrom]: https://flashrom.org/Flashrom
|
||||
|
|
@ -54,6 +54,7 @@ The boards in this section are not real mainboards, but emulators.
|
|||
## HP
|
||||
|
||||
- [Compaq 8200 Elite SFF](hp/compaq_8200_sff.md)
|
||||
- [Z220 Workstation SFF](hp/z220_sff.md)
|
||||
|
||||
### EliteBook series
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,60 @@
|
|||
if BOARD_HP_COMPAQ_8200_ELITE_SFF_PC
|
||||
|
||||
config BOARD_SPECIFIC_OPTIONS
|
||||
def_bool y
|
||||
select BOARD_ROMSIZE_KB_16384
|
||||
select HAVE_ACPI_RESUME
|
||||
select HAVE_ACPI_TABLES
|
||||
select INTEL_INT15
|
||||
select NORTHBRIDGE_INTEL_SANDYBRIDGE
|
||||
select SERIRQ_CONTINUOUS_MODE
|
||||
select SOUTHBRIDGE_INTEL_BD82X6X
|
||||
select USE_NATIVE_RAMINIT
|
||||
select MAINBOARD_HAS_LPC_TPM
|
||||
select MAINBOARD_HAS_TPM1
|
||||
select HAVE_OPTION_TABLE
|
||||
select HAVE_CMOS_DEFAULT
|
||||
select SUPERIO_NUVOTON_NPCD378
|
||||
select MAINBOARD_HAS_LIBGFXINIT
|
||||
select INTEL_GMA_HAVE_VBT
|
||||
|
||||
config VBOOT
|
||||
select VBOOT_VBNV_CMOS
|
||||
select VBOOT_NO_BOARD_SUPPORT
|
||||
select GBB_FLAG_DISABLE_LID_SHUTDOWN
|
||||
select GBB_FLAG_DISABLE_PD_SOFTWARE_SYNC
|
||||
select GBB_FLAG_DISABLE_EC_SOFTWARE_SYNC
|
||||
select GBB_FLAG_DISABLE_FWMP
|
||||
|
||||
config VBOOT_VBNV_OFFSET
|
||||
hex
|
||||
default 0x2a
|
||||
|
||||
config MAINBOARD_DIR
|
||||
string
|
||||
default hp/z220_sff_workstation
|
||||
|
||||
config MAINBOARD_PART_NUMBER
|
||||
string
|
||||
default "HP Z220 SFF Workstation"
|
||||
|
||||
config VGA_BIOS_FILE
|
||||
string
|
||||
default "pci8086,0102.rom"
|
||||
|
||||
config VGA_BIOS_ID
|
||||
string
|
||||
default "8086,0102"
|
||||
|
||||
config DRAM_RESET_GATE_GPIO
|
||||
int
|
||||
default 60
|
||||
|
||||
config MAX_CPUS
|
||||
int
|
||||
default 8
|
||||
|
||||
config USBDEBUG_HCD_INDEX
|
||||
int
|
||||
default 2
|
||||
endif
|
||||
|
|
@ -0,0 +1,2 @@
|
|||
config BOARD_HP_COMPAQ_8200_ELITE_SFF_PC
|
||||
bool "Z220 SFF Workstation"
|
||||
|
|
@ -0,0 +1,2 @@
|
|||
romstage-y += gpio.c
|
||||
ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads
|
||||
|
|
@ -0,0 +1,26 @@
|
|||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright (C) 2018 Patrick Rudolph <siro@das-labor.org>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; version 2 of the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
Method(_WAK, 1, NotSerialized)
|
||||
{
|
||||
\_SB.PCI0.LPCB.SIO0.SIOW (Arg0)
|
||||
|
||||
Return(Package(){0,0})
|
||||
}
|
||||
|
||||
Method(_PTS, 1, NotSerialized)
|
||||
{
|
||||
\_SB.PCI0.LPCB.SIO0.SIOS (Arg0)
|
||||
}
|
||||
|
|
@ -0,0 +1,54 @@
|
|||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright (C) 2018 Patrick Rudolph <siro@das-labor.org>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; version 2 of the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
|
||||
#undef SUPERIO_DEV
|
||||
#undef SUPERIO_PNP_BASE
|
||||
#define SUPERIO_DEV SIO0
|
||||
#define SUPERIO_PNP_BASE 0x2e
|
||||
|
||||
#define SUPERIO_SHOW_SP2
|
||||
#define SUPERIO_SHOW_KBC
|
||||
|
||||
#include <superio/nuvoton/npcd378/acpi/superio.asl>
|
||||
|
||||
Scope (\_GPE)
|
||||
{
|
||||
Method (_L08, 0, NotSerialized)
|
||||
{
|
||||
\_SB.PCI0.LPCB.SIO0.SIOH ()
|
||||
}
|
||||
|
||||
Method (_L0D, 0, NotSerialized)
|
||||
{
|
||||
Notify (\_SB.PCI0.EHC1, 0x02)
|
||||
Notify (\_SB.PCI0.EHC2, 0x02)
|
||||
//FIXME: Add GBE device
|
||||
//Notify (\_SB.PCI0.GBE, 0x02)
|
||||
}
|
||||
|
||||
Method (_L09, 0, NotSerialized)
|
||||
{
|
||||
Notify (\_SB.PCI0.RP01, 0x02)
|
||||
Notify (\_SB.PCI0.RP02, 0x02)
|
||||
Notify (\_SB.PCI0.RP03, 0x02)
|
||||
Notify (\_SB.PCI0.RP04, 0x02)
|
||||
Notify (\_SB.PCI0.RP05, 0x02)
|
||||
Notify (\_SB.PCI0.RP06, 0x02)
|
||||
Notify (\_SB.PCI0.RP07, 0x02)
|
||||
Notify (\_SB.PCI0.RP08, 0x02)
|
||||
Notify (\_SB.PCI0.PEGP, 0x02)
|
||||
}
|
||||
}
|
||||
|
|
@ -0,0 +1,33 @@
|
|||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright (C) 2008-2009 coresystems GmbH
|
||||
* Copyright (C) 2014 Vladimir Serbinenko
|
||||
* Copyright (C) 2018 Patrick Rudolph <siro@das-labor.org>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; version 2 of
|
||||
* the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include <southbridge/intel/bd82x6x/nvs.h>
|
||||
|
||||
void acpi_create_gnvs(global_nvs_t *gnvs)
|
||||
{
|
||||
/* Disable USB ports in S3 by default */
|
||||
gnvs->s3u0 = 0;
|
||||
gnvs->s3u1 = 0;
|
||||
|
||||
/* Disable USB ports in S5 by default */
|
||||
gnvs->s5u0 = 0;
|
||||
gnvs->s5u1 = 0;
|
||||
|
||||
gnvs->tcrt = 100;
|
||||
gnvs->tpsv = 90;
|
||||
}
|
||||
|
|
@ -0,0 +1,7 @@
|
|||
Category: desktop
|
||||
Board URL: https://support.hp.com/de-de/product/HP-Compaq-8200-Elite-Small-Form-Factor-PC/5037931
|
||||
ROM IC: MX25L6405
|
||||
ROM package: SOIC-8
|
||||
ROM socketed: no
|
||||
Flashrom support: yes
|
||||
Release year: 2013
|
||||
|
|
@ -0,0 +1,7 @@
|
|||
boot_option=Fallback
|
||||
debug_level=Debug
|
||||
power_on_after_fail=Enable
|
||||
nmi=Enable
|
||||
sata_mode=AHCI
|
||||
gfx_uma_size=32M
|
||||
psu_fan_lvl=3
|
||||
|
|
@ -0,0 +1,116 @@
|
|||
##
|
||||
## This file is part of the coreboot project.
|
||||
##
|
||||
## Copyright (C) 2007-2008 coresystems GmbH
|
||||
## Copyright (C) 2014 Vladimir Serbinenko
|
||||
## Copyright (C) 2018 Patrick Rudolph <siro@das-labor.org>
|
||||
##
|
||||
## This program is free software; you can redistribute it and/or modify
|
||||
## it under the terms of the GNU General Public License as published by
|
||||
## the Free Software Foundation; version 2 of the License.
|
||||
##
|
||||
## This program is distributed in the hope that it will be useful,
|
||||
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
## GNU General Public License for more details.
|
||||
##
|
||||
|
||||
# -----------------------------------------------------------------
|
||||
entries
|
||||
|
||||
# -----------------------------------------------------------------
|
||||
# Status Register A
|
||||
# -----------------------------------------------------------------
|
||||
# Status Register B
|
||||
# -----------------------------------------------------------------
|
||||
# Status Register C
|
||||
#96 4 r 0 status_c_rsvd
|
||||
#100 1 r 0 uf_flag
|
||||
#101 1 r 0 af_flag
|
||||
#102 1 r 0 pf_flag
|
||||
#103 1 r 0 irqf_flag
|
||||
# -----------------------------------------------------------------
|
||||
# Status Register D
|
||||
#104 7 r 0 status_d_rsvd
|
||||
#111 1 r 0 valid_cmos_ram
|
||||
# -----------------------------------------------------------------
|
||||
# Diagnostic Status Register
|
||||
#112 8 r 0 diag_rsvd1
|
||||
|
||||
# -----------------------------------------------------------------
|
||||
0 120 r 0 reserved_memory
|
||||
#120 264 r 0 unused
|
||||
|
||||
# -----------------------------------------------------------------
|
||||
# RTC_BOOT_BYTE (coreboot hardcoded)
|
||||
384 1 e 4 boot_option
|
||||
388 4 h 0 reboot_counter
|
||||
#390 2 r 0 unused?
|
||||
|
||||
# -----------------------------------------------------------------
|
||||
# coreboot config options: console
|
||||
#392 3 r 0 unused
|
||||
395 4 e 6 debug_level
|
||||
#399 1 r 0 unused
|
||||
400 3 h 0 psu_fan_lvl
|
||||
#403 5 r 0 unused
|
||||
|
||||
# coreboot config options: southbridge
|
||||
408 1 e 1 nmi
|
||||
409 2 e 7 power_on_after_fail
|
||||
|
||||
#411 10 r 0 unused
|
||||
421 1 e 9 sata_mode
|
||||
#422 10 r 0 unused
|
||||
|
||||
# coreboot config options: northbridge
|
||||
432 3 e 11 gfx_uma_size
|
||||
#435 549 r 0 unused
|
||||
|
||||
448 128 r 0 vbnv
|
||||
|
||||
# SandyBridge MRC Scrambler Seed values
|
||||
896 32 r 0 mrc_scrambler_seed
|
||||
928 32 r 0 mrc_scrambler_seed_s3
|
||||
960 16 r 0 mrc_scrambler_seed_chk
|
||||
|
||||
# coreboot config options: check sums
|
||||
984 16 h 0 check_sum
|
||||
|
||||
# -----------------------------------------------------------------
|
||||
|
||||
enumerations
|
||||
|
||||
#ID value text
|
||||
1 0 Disable
|
||||
1 1 Enable
|
||||
2 0 Enable
|
||||
2 1 Disable
|
||||
4 0 Fallback
|
||||
4 1 Normal
|
||||
6 0 Emergency
|
||||
6 1 Alert
|
||||
6 2 Critical
|
||||
6 3 Error
|
||||
6 4 Warning
|
||||
6 5 Notice
|
||||
6 6 Info
|
||||
6 7 Debug
|
||||
6 8 Spew
|
||||
7 0 Disable
|
||||
7 1 Enable
|
||||
7 2 Keep
|
||||
9 0 AHCI
|
||||
9 1 IDE
|
||||
11 0 32M
|
||||
11 1 64M
|
||||
11 2 96M
|
||||
11 3 128M
|
||||
11 4 160M
|
||||
11 5 192M
|
||||
11 6 224M
|
||||
|
||||
# -----------------------------------------------------------------
|
||||
checksums
|
||||
|
||||
checksum 392 415 984
|
||||
Binary file not shown.
|
|
@ -0,0 +1,225 @@
|
|||
##
|
||||
## This file is part of the coreboot project.
|
||||
##
|
||||
## Copyright (C) 2018 Patrick Rudolph <siro@das-labor.org>
|
||||
##
|
||||
## This program is free software; you can redistribute it and/or
|
||||
## modify it under the terms of the GNU General Public License as
|
||||
## published by the Free Software Foundation; version 2 of
|
||||
## the License.
|
||||
##
|
||||
## This program is distributed in the hope that it will be useful,
|
||||
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
## GNU General Public License for more details.
|
||||
##
|
||||
|
||||
chip northbridge/intel/sandybridge
|
||||
register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410 }"
|
||||
register "gfx.link_frequency_270_mhz" = "0"
|
||||
register "gfx.ndid" = "3"
|
||||
register "gfx.use_spread_spectrum_clock" = "0"
|
||||
register "gpu_dp_b_hotplug" = "0"
|
||||
register "gpu_dp_c_hotplug" = "0"
|
||||
register "gpu_dp_d_hotplug" = "0"
|
||||
|
||||
device cpu_cluster 0x0 on
|
||||
chip cpu/intel/model_206ax
|
||||
register "c1_acpower" = "1"
|
||||
register "c1_battery" = "1"
|
||||
register "c2_acpower" = "3"
|
||||
register "c2_battery" = "3"
|
||||
register "c3_acpower" = "5"
|
||||
register "c3_battery" = "5"
|
||||
device lapic 0x0 on end
|
||||
device lapic 0xacac off end
|
||||
end
|
||||
end
|
||||
|
||||
register "pci_mmio_size" = "2048"
|
||||
|
||||
device domain 0x0 on
|
||||
chip southbridge/intel/bd82x6x # Intel Series 7 PCH
|
||||
register "c2_latency" = "0x0065"
|
||||
register "docking_supported" = "0"
|
||||
register "gen1_dec" = "0x00fc0601"
|
||||
register "gen2_dec" = "0x00fc0801"
|
||||
register "p_cnt_throttling_supported" = "1"
|
||||
register "pcie_hotplug_map" = "{ 0, 0, 0, 0, 0, 0, 0, 0 }"
|
||||
register "pcie_port_coalesce" = "1"
|
||||
register "sata_interface_speed_support" = "0x3"
|
||||
register "sata_port_map" = "0xf"
|
||||
register "spi_lvscc" = "0x2005"
|
||||
register "spi_uvscc" = "0x2005"
|
||||
device pci 14.0 on # xHCI
|
||||
subsystemid 0x103c 0x1791
|
||||
end
|
||||
device pci 16.0 on # Management Engine Interface 1
|
||||
subsystemid 0x103c 0x1791
|
||||
end
|
||||
device pci 16.1 off # Management Engine Interface 2
|
||||
end
|
||||
device pci 16.2 off # Management Engine IDE-R
|
||||
end
|
||||
device pci 16.3 on # Management Engine KT
|
||||
subsystemid 0x103c 0x1791
|
||||
end
|
||||
device pci 19.0 on # Intel Gigabit Ethernet
|
||||
subsystemid 0x103c 0x1791
|
||||
end
|
||||
device pci 1a.0 on # USB2 EHCI #2
|
||||
subsystemid 0x103c 0x1791
|
||||
end
|
||||
device pci 1b.0 on # High Definition Audio Audio controller
|
||||
subsystemid 0x103c 0x1791
|
||||
end
|
||||
device pci 1c.0 on # PCIe Port #1
|
||||
subsystemid 0x103c 0x1791
|
||||
end
|
||||
device pci 1c.1 off # PCIe Port #2
|
||||
end
|
||||
device pci 1c.2 off # PCIe Port #3
|
||||
end
|
||||
device pci 1c.3 off # PCIe Port #4
|
||||
end
|
||||
device pci 1c.4 on # PCIe Port #5
|
||||
subsystemid 0x103c 0x1791
|
||||
end
|
||||
device pci 1c.5 off # PCIe Port #6
|
||||
end
|
||||
device pci 1c.6 on # PCIe Port #7
|
||||
subsystemid 0x103c 0x1791
|
||||
end
|
||||
device pci 1c.7 on # PCIe Port #8
|
||||
subsystemid 0x103c 0x1791
|
||||
end
|
||||
device pci 1d.0 on # USB2 EHCI #1
|
||||
subsystemid 0x103c 0x1791
|
||||
end
|
||||
device pci 1e.0 on # PCI bridge
|
||||
subsystemid 0x103c 0x1791
|
||||
end
|
||||
device pci 1f.0 on # LPC bridge PCI-LPC bridge
|
||||
subsystemid 0x103c 0x1791
|
||||
chip superio/nuvoton/npcd378
|
||||
device pnp 2e.0 off end # Floppy
|
||||
device pnp 2e.1 on # Parallel port
|
||||
# global
|
||||
|
||||
# serialice: Vendor writes:
|
||||
irq 0x14 = 0x9c
|
||||
irq 0x1c = 0xa8
|
||||
irq 0x1d = 0x08
|
||||
irq 0x22 = 0x3f
|
||||
irq 0x1a = 0xb0
|
||||
# dumped from superiotool:
|
||||
irq 0x1b = 0x1e
|
||||
irq 0x27 = 0x08
|
||||
irq 0x2a = 0x20
|
||||
irq 0x2d = 0x01
|
||||
# parallel port
|
||||
io 0x60 = 0x378
|
||||
irq 0x70 = 0x07
|
||||
drq 0x74 = 0x01
|
||||
end
|
||||
device pnp 2e.2 off # COM1
|
||||
io 0x60 = 0x2f8
|
||||
irq 0x70 = 3
|
||||
end
|
||||
device pnp 2e.3 on # COM2, IR
|
||||
io 0x60 = 0x3f8
|
||||
irq 0x70 = 4
|
||||
end
|
||||
device pnp 2e.4 on # LED control
|
||||
io 0x60 = 0x600
|
||||
# IOBASE[0h] = bit0 LED red / green
|
||||
# IOBASE[0h] = bit1-4 LED PWM duty cycle
|
||||
# IOBASE[1h] = bit6 SWCC
|
||||
|
||||
io 0x62 = 0x610
|
||||
# IOBASE [0h] = GPES
|
||||
# IOBASE [1h] = GPEE
|
||||
# IOBASE [4h:7h] = 32bit upcounter at 1Mhz
|
||||
# IOBASE [8h:bh] = GPS
|
||||
# IOBASE [ch:fh] = GPE
|
||||
end
|
||||
device pnp 2e.5 on # Mouse
|
||||
irq 0x70 = 0xc
|
||||
end
|
||||
device pnp 2e.6 on # Keyboard
|
||||
io 0x60 = 0x0060
|
||||
io 0x62 = 0x0064
|
||||
irq 0x70 = 0x01
|
||||
# serialice: Vendor writes:
|
||||
drq 0xf0 = 0x40
|
||||
end
|
||||
device pnp 2e.7 on # WDT ?
|
||||
io 0x60 = 0x620
|
||||
end
|
||||
device pnp 2e.8 on # HWM
|
||||
io 0x60 = 0x800
|
||||
# IOBASE[0h:feh] HWM page
|
||||
# IOBASE[ffh] bit0-bit3 page selector
|
||||
|
||||
drq 0xf0 = 0x20
|
||||
drq 0xf1 = 0x01
|
||||
drq 0xf2 = 0x40
|
||||
drq 0xf3 = 0x01
|
||||
|
||||
drq 0xf4 = 0x66
|
||||
drq 0xf5 = 0x67
|
||||
drq 0xf6 = 0x66
|
||||
drq 0xf7 = 0x01
|
||||
end
|
||||
device pnp 2e.f on # GPIO OD ?
|
||||
drq 0xf1 = 0x97
|
||||
drq 0xf2 = 0x01
|
||||
drq 0xf5 = 0x08
|
||||
drq 0xfe = 0x80
|
||||
end
|
||||
device pnp 2e.15 on # BUS ?
|
||||
io 0x60 = 0x0680
|
||||
io 0x62 = 0x0690
|
||||
end
|
||||
device pnp 2e.1c on # Suspend Control ?
|
||||
io 0x60 = 0x640
|
||||
# writing to IOBASE[5h]
|
||||
# 0x0: Power off
|
||||
# 0x9: Power off and bricked until CMOS battery removed
|
||||
end
|
||||
device pnp 2e.1e on # GPIO ?
|
||||
io 0x60 = 0x660
|
||||
drq 0xf4 = 0x01
|
||||
# skip the following, as it
|
||||
# looks like remapped registers
|
||||
#drq 0xf5 = 0x06
|
||||
#drq 0xf6 = 0x60
|
||||
#drq 0xfe = 0x03
|
||||
end
|
||||
end
|
||||
chip drivers/pc80/tpm
|
||||
device pnp 4e.0 on end # TPM module
|
||||
end
|
||||
end
|
||||
device pci 1f.2 on # SATA Controller 1
|
||||
subsystemid 0x103c 0x1791
|
||||
end
|
||||
device pci 1f.3 on # SMBus
|
||||
subsystemid 0x103c 0x1791
|
||||
end
|
||||
device pci 1f.5 off # SATA Controller 2
|
||||
end
|
||||
device pci 1f.6 off # Thermal
|
||||
end
|
||||
end
|
||||
device pci 00.0 on # Host bridge Host bridge
|
||||
subsystemid 0x103c 0x1791
|
||||
end
|
||||
device pci 01.0 on # PCIe Bridge for discrete graphics
|
||||
subsystemid 0x103c 0x1791
|
||||
end
|
||||
device pci 02.0 on # Internal graphics VGA controller
|
||||
subsystemid 0x103c 0x1791
|
||||
end
|
||||
end
|
||||
end
|
||||
|
|
@ -0,0 +1,45 @@
|
|||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright (C) 2018 Patrick Rudolph <siro@das-labor.org>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; version 2 of the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#define BRIGHTNESS_UP \_SB.PCI0.GFX0.INCB
|
||||
#define BRIGHTNESS_DOWN \_SB.PCI0.GFX0.DECB
|
||||
#define ACPI_VIDEO_DEVICE \_SB.PCI0.GFX0
|
||||
#include <arch/acpi.h>
|
||||
DefinitionBlock(
|
||||
"dsdt.aml",
|
||||
"DSDT",
|
||||
0x02, // DSDT revision: ACPI v2.0 and up
|
||||
OEM_ID,
|
||||
ACPI_TABLE_CREATOR,
|
||||
0x20141018 // OEM revision
|
||||
)
|
||||
{
|
||||
// Some generic macros
|
||||
#include "acpi/platform.asl"
|
||||
#include <cpu/intel/common/acpi/cpu.asl>
|
||||
#include <southbridge/intel/bd82x6x/acpi/platform.asl>
|
||||
/* global NVS and variables. */
|
||||
#include <southbridge/intel/bd82x6x/acpi/globalnvs.asl>
|
||||
#include <southbridge/intel/bd82x6x/acpi/sleepstates.asl>
|
||||
|
||||
Scope (\_SB) {
|
||||
Device (PCI0)
|
||||
{
|
||||
#include <northbridge/intel/sandybridge/acpi/sandybridge.asl>
|
||||
#include <drivers/intel/gma/acpi/default_brightness_levels.asl>
|
||||
#include <southbridge/intel/bd82x6x/acpi/pch.asl>
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -0,0 +1,29 @@
|
|||
--
|
||||
-- Copyright (C) 2018 Patrick Rudolph <siro@das-labor.org>
|
||||
--
|
||||
-- This program is free software; you can redistribute it and/or modify
|
||||
-- it under the terms of the GNU General Public License as published by
|
||||
-- the Free Software Foundation; either version 2 of the License, or
|
||||
-- (at your option) any later version.
|
||||
--
|
||||
-- This program is distributed in the hope that it will be useful,
|
||||
-- but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
-- GNU General Public License for more details.
|
||||
--
|
||||
|
||||
with HW.GFX.GMA;
|
||||
with HW.GFX.GMA.Display_Probing;
|
||||
|
||||
use HW.GFX.GMA;
|
||||
use HW.GFX.GMA.Display_Probing;
|
||||
|
||||
private package GMA.Mainboard is
|
||||
|
||||
ports : constant Port_List :=
|
||||
(DP2,
|
||||
HDMI2,
|
||||
Analog,
|
||||
others => Disabled);
|
||||
|
||||
end GMA.Mainboard;
|
||||
|
|
@ -0,0 +1,206 @@
|
|||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright (C) 2008-2009 coresystems GmbH
|
||||
* Copyright (C) 2014 Vladimir Serbinenko
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; version 2 of
|
||||
* the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include <southbridge/intel/common/gpio.h>
|
||||
|
||||
static const struct pch_gpio_set1 pch_gpio_set1_mode = {
|
||||
.gpio0 = GPIO_MODE_GPIO,
|
||||
.gpio1 = GPIO_MODE_GPIO,
|
||||
.gpio2 = GPIO_MODE_NATIVE,
|
||||
.gpio3 = GPIO_MODE_NATIVE,
|
||||
.gpio4 = GPIO_MODE_NATIVE,
|
||||
.gpio5 = GPIO_MODE_NATIVE,
|
||||
.gpio6 = GPIO_MODE_GPIO,
|
||||
.gpio7 = GPIO_MODE_GPIO,
|
||||
.gpio8 = GPIO_MODE_GPIO,
|
||||
.gpio9 = GPIO_MODE_NATIVE,
|
||||
.gpio10 = GPIO_MODE_NATIVE,
|
||||
.gpio11 = GPIO_MODE_NATIVE,
|
||||
.gpio12 = GPIO_MODE_NATIVE,
|
||||
.gpio13 = GPIO_MODE_GPIO,
|
||||
.gpio14 = GPIO_MODE_NATIVE,
|
||||
.gpio15 = GPIO_MODE_GPIO,
|
||||
.gpio16 = GPIO_MODE_GPIO,
|
||||
.gpio17 = GPIO_MODE_GPIO,
|
||||
.gpio18 = GPIO_MODE_NATIVE,
|
||||
.gpio19 = GPIO_MODE_NATIVE,
|
||||
.gpio20 = GPIO_MODE_NATIVE,
|
||||
.gpio21 = GPIO_MODE_GPIO,
|
||||
.gpio22 = GPIO_MODE_GPIO,
|
||||
.gpio23 = GPIO_MODE_NATIVE,
|
||||
.gpio24 = GPIO_MODE_GPIO,
|
||||
.gpio25 = GPIO_MODE_NATIVE,
|
||||
.gpio26 = GPIO_MODE_NATIVE,
|
||||
.gpio27 = GPIO_MODE_GPIO,
|
||||
.gpio28 = GPIO_MODE_GPIO,
|
||||
.gpio29 = GPIO_MODE_GPIO,
|
||||
.gpio30 = GPIO_MODE_NATIVE,
|
||||
.gpio31 = GPIO_MODE_GPIO,
|
||||
};
|
||||
|
||||
static const struct pch_gpio_set1 pch_gpio_set1_direction = {
|
||||
.gpio0 = GPIO_DIR_INPUT,
|
||||
.gpio1 = GPIO_DIR_INPUT,
|
||||
.gpio6 = GPIO_DIR_INPUT,
|
||||
.gpio7 = GPIO_DIR_INPUT,
|
||||
.gpio8 = GPIO_DIR_INPUT,
|
||||
.gpio13 = GPIO_DIR_INPUT,
|
||||
.gpio15 = GPIO_DIR_OUTPUT,
|
||||
.gpio16 = GPIO_DIR_INPUT,
|
||||
.gpio17 = GPIO_DIR_OUTPUT,
|
||||
.gpio21 = GPIO_DIR_INPUT,
|
||||
.gpio22 = GPIO_DIR_INPUT,
|
||||
.gpio24 = GPIO_DIR_INPUT,
|
||||
.gpio27 = GPIO_DIR_INPUT,
|
||||
.gpio28 = GPIO_DIR_OUTPUT,
|
||||
.gpio29 = GPIO_DIR_OUTPUT,
|
||||
.gpio31 = GPIO_DIR_INPUT,
|
||||
};
|
||||
|
||||
static const struct pch_gpio_set1 pch_gpio_set1_level = {
|
||||
.gpio15 = GPIO_LEVEL_LOW,
|
||||
.gpio17 = GPIO_LEVEL_LOW,
|
||||
.gpio28 = GPIO_LEVEL_LOW,
|
||||
.gpio29 = GPIO_LEVEL_HIGH,
|
||||
};
|
||||
|
||||
static const struct pch_gpio_set1 pch_gpio_set1_reset = {
|
||||
};
|
||||
|
||||
static const struct pch_gpio_set1 pch_gpio_set1_invert = {
|
||||
.gpio0 = GPIO_INVERT,
|
||||
.gpio1 = GPIO_INVERT,
|
||||
.gpio6 = GPIO_INVERT,
|
||||
.gpio7 = GPIO_INVERT,
|
||||
.gpio13 = GPIO_INVERT,
|
||||
};
|
||||
|
||||
static const struct pch_gpio_set1 pch_gpio_set1_blink = {
|
||||
};
|
||||
|
||||
static const struct pch_gpio_set2 pch_gpio_set2_mode = {
|
||||
.gpio32 = GPIO_MODE_GPIO,
|
||||
.gpio33 = GPIO_MODE_GPIO,
|
||||
.gpio34 = GPIO_MODE_GPIO,
|
||||
.gpio35 = GPIO_MODE_GPIO,
|
||||
.gpio36 = GPIO_MODE_GPIO,
|
||||
.gpio37 = GPIO_MODE_GPIO,
|
||||
.gpio38 = GPIO_MODE_GPIO,
|
||||
.gpio39 = GPIO_MODE_GPIO,
|
||||
.gpio40 = GPIO_MODE_NATIVE,
|
||||
.gpio41 = GPIO_MODE_NATIVE,
|
||||
.gpio42 = GPIO_MODE_NATIVE,
|
||||
.gpio43 = GPIO_MODE_GPIO,
|
||||
.gpio44 = GPIO_MODE_NATIVE,
|
||||
.gpio45 = GPIO_MODE_NATIVE,
|
||||
.gpio46 = GPIO_MODE_GPIO,
|
||||
.gpio47 = GPIO_MODE_NATIVE,
|
||||
.gpio48 = GPIO_MODE_GPIO,
|
||||
.gpio49 = GPIO_MODE_GPIO,
|
||||
.gpio50 = GPIO_MODE_NATIVE,
|
||||
.gpio51 = GPIO_MODE_NATIVE,
|
||||
.gpio52 = GPIO_MODE_NATIVE,
|
||||
.gpio53 = GPIO_MODE_NATIVE,
|
||||
.gpio54 = GPIO_MODE_GPIO,
|
||||
.gpio55 = GPIO_MODE_GPIO,
|
||||
.gpio56 = GPIO_MODE_NATIVE,
|
||||
.gpio57 = GPIO_MODE_GPIO,
|
||||
.gpio58 = GPIO_MODE_NATIVE,
|
||||
.gpio59 = GPIO_MODE_NATIVE,
|
||||
.gpio60 = GPIO_MODE_NATIVE,
|
||||
.gpio61 = GPIO_MODE_GPIO,
|
||||
.gpio62 = GPIO_MODE_NATIVE,
|
||||
.gpio63 = GPIO_MODE_NATIVE,
|
||||
};
|
||||
|
||||
static const struct pch_gpio_set2 pch_gpio_set2_direction = {
|
||||
.gpio32 = GPIO_DIR_INPUT,
|
||||
.gpio33 = GPIO_DIR_INPUT,
|
||||
.gpio34 = GPIO_DIR_INPUT,
|
||||
.gpio35 = GPIO_DIR_INPUT,
|
||||
.gpio36 = GPIO_DIR_INPUT,
|
||||
.gpio37 = GPIO_DIR_INPUT,
|
||||
.gpio38 = GPIO_DIR_INPUT,
|
||||
.gpio39 = GPIO_DIR_INPUT,
|
||||
.gpio43 = GPIO_DIR_INPUT,
|
||||
.gpio46 = GPIO_DIR_INPUT,
|
||||
.gpio48 = GPIO_DIR_INPUT,
|
||||
.gpio49 = GPIO_DIR_INPUT,
|
||||
.gpio54 = GPIO_DIR_INPUT,
|
||||
.gpio55 = GPIO_DIR_INPUT,
|
||||
.gpio57 = GPIO_DIR_INPUT,
|
||||
.gpio61 = GPIO_DIR_INPUT,
|
||||
};
|
||||
|
||||
static const struct pch_gpio_set2 pch_gpio_set2_level = {
|
||||
};
|
||||
|
||||
static const struct pch_gpio_set2 pch_gpio_set2_reset = {
|
||||
};
|
||||
|
||||
static const struct pch_gpio_set3 pch_gpio_set3_mode = {
|
||||
.gpio64 = GPIO_MODE_NATIVE,
|
||||
.gpio65 = GPIO_MODE_NATIVE,
|
||||
.gpio66 = GPIO_MODE_NATIVE,
|
||||
.gpio67 = GPIO_MODE_NATIVE,
|
||||
.gpio68 = GPIO_MODE_GPIO,
|
||||
.gpio69 = GPIO_MODE_GPIO,
|
||||
.gpio70 = GPIO_MODE_GPIO,
|
||||
.gpio71 = GPIO_MODE_GPIO,
|
||||
.gpio72 = GPIO_MODE_GPIO,
|
||||
.gpio73 = GPIO_MODE_NATIVE,
|
||||
.gpio74 = GPIO_MODE_NATIVE,
|
||||
.gpio75 = GPIO_MODE_NATIVE,
|
||||
};
|
||||
|
||||
static const struct pch_gpio_set3 pch_gpio_set3_direction = {
|
||||
.gpio68 = GPIO_DIR_INPUT,
|
||||
.gpio69 = GPIO_DIR_INPUT,
|
||||
.gpio70 = GPIO_DIR_INPUT,
|
||||
.gpio71 = GPIO_DIR_OUTPUT,
|
||||
.gpio72 = GPIO_DIR_INPUT,
|
||||
};
|
||||
|
||||
static const struct pch_gpio_set3 pch_gpio_set3_level = {
|
||||
.gpio71 = GPIO_LEVEL_LOW,
|
||||
};
|
||||
|
||||
static const struct pch_gpio_set3 pch_gpio_set3_reset = {
|
||||
};
|
||||
|
||||
const struct pch_gpio_map mainboard_gpio_map = {
|
||||
.set1 = {
|
||||
.mode = &pch_gpio_set1_mode,
|
||||
.direction = &pch_gpio_set1_direction,
|
||||
.level = &pch_gpio_set1_level,
|
||||
.blink = &pch_gpio_set1_blink,
|
||||
.invert = &pch_gpio_set1_invert,
|
||||
.reset = &pch_gpio_set1_reset,
|
||||
},
|
||||
.set2 = {
|
||||
.mode = &pch_gpio_set2_mode,
|
||||
.direction = &pch_gpio_set2_direction,
|
||||
.level = &pch_gpio_set2_level,
|
||||
.reset = &pch_gpio_set2_reset,
|
||||
},
|
||||
.set3 = {
|
||||
.mode = &pch_gpio_set3_mode,
|
||||
.direction = &pch_gpio_set3_direction,
|
||||
.level = &pch_gpio_set3_level,
|
||||
.reset = &pch_gpio_set3_reset,
|
||||
},
|
||||
};
|
||||
|
|
@ -0,0 +1,76 @@
|
|||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright (C) 2008-2009 coresystems GmbH
|
||||
* Copyright (C) 2014 Vladimir Serbinenko
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; version 2 of
|
||||
* the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include <device/azalia_device.h>
|
||||
|
||||
const u32 cim_verb_data[] = {
|
||||
0x10ec0221, /* Codec Vendor / Device ID: Realtek */
|
||||
0x103c1791, /* Subsystem ID */
|
||||
|
||||
0x0000000b, /* Number of 4 dword sets */
|
||||
/* NID 0x01: Subsystem ID. */
|
||||
AZALIA_SUBVENDOR(0x0, 0x103c1791),
|
||||
|
||||
/* NID 0x12. */
|
||||
AZALIA_PIN_CFG(0x0, 0x12, 0x403c0000),
|
||||
|
||||
/* NID 0x14. */
|
||||
AZALIA_PIN_CFG(0x0, 0x14, 0x01014020),
|
||||
|
||||
/* NID 0x17. */
|
||||
AZALIA_PIN_CFG(0x0, 0x17, 0x90170110),
|
||||
|
||||
/* NID 0x18. */
|
||||
AZALIA_PIN_CFG(0x0, 0x18, 0x411111f0),
|
||||
|
||||
/* NID 0x19. */
|
||||
AZALIA_PIN_CFG(0x0, 0x19, 0x411111f0),
|
||||
|
||||
/* NID 0x1a. */
|
||||
AZALIA_PIN_CFG(0x0, 0x1a, 0x02a11030),
|
||||
|
||||
/* NID 0x1b. */
|
||||
AZALIA_PIN_CFG(0x0, 0x1b, 0x0181303f),
|
||||
|
||||
/* NID 0x1d. */
|
||||
AZALIA_PIN_CFG(0x0, 0x1d, 0x40400001),
|
||||
|
||||
/* NID 0x1e. */
|
||||
AZALIA_PIN_CFG(0x0, 0x1e, 0x411111f0),
|
||||
|
||||
/* NID 0x21. */
|
||||
AZALIA_PIN_CFG(0x0, 0x21, 0x0221102f),
|
||||
0x80862806, /* Codec Vendor / Device ID: Intel */
|
||||
0x103c1791, /* Subsystem ID */
|
||||
|
||||
0x00000004, /* Number of 4 dword sets */
|
||||
/* NID 0x01: Subsystem ID. */
|
||||
AZALIA_SUBVENDOR(0x3, 0x103c1791),
|
||||
|
||||
/* NID 0x05. */
|
||||
AZALIA_PIN_CFG(0x3, 0x05, 0x58560010),
|
||||
|
||||
/* NID 0x06. */
|
||||
AZALIA_PIN_CFG(0x3, 0x06, 0x18560020),
|
||||
|
||||
/* NID 0x07. */
|
||||
AZALIA_PIN_CFG(0x3, 0x07, 0x58560030),
|
||||
};
|
||||
|
||||
const u32 pc_beep_verbs[0] = {};
|
||||
|
||||
AZALIA_ARRAY_SIZES;
|
||||
|
|
@ -0,0 +1,55 @@
|
|||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright (C) 2014 Vladimir Serbinenko
|
||||
* Copyright (C) 2018 Patrick Rudolph <siro@das-labor.org>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; version 2 of
|
||||
* the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
#include <device/device.h>
|
||||
#include <drivers/intel/gma/int15.h>
|
||||
#include <southbridge/intel/bd82x6x/pch.h>
|
||||
#include <smbios.h>
|
||||
|
||||
#if CONFIG(GENERATE_SMBIOS_TABLES)
|
||||
static int mainboard_smbios_data(struct device *dev, int *handle,
|
||||
unsigned long *current)
|
||||
{
|
||||
int len = 0;
|
||||
|
||||
// add IPMI Device Information
|
||||
len += smbios_write_type38(
|
||||
current, handle,
|
||||
SMBIOS_BMC_INTERFACE_KCS,
|
||||
0x20, // IPMI Version
|
||||
0x20, // I2C address
|
||||
0xff, // no NV storage
|
||||
0, // IO port interface address
|
||||
0,
|
||||
0); // no IRQ
|
||||
|
||||
return len;
|
||||
}
|
||||
#endif
|
||||
|
||||
static void mainboard_enable(struct device *dev)
|
||||
{
|
||||
install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_NONE,
|
||||
GMA_INT15_PANEL_FIT_DEFAULT,
|
||||
GMA_INT15_BOOT_DISPLAY_DEFAULT, 0);
|
||||
#if CONFIG(GENERATE_SMBIOS_TABLES)
|
||||
dev->ops->get_smbios_data = mainboard_smbios_data;
|
||||
#endif
|
||||
}
|
||||
|
||||
struct chip_operations mainboard_ops = {
|
||||
.enable_dev = mainboard_enable,
|
||||
};
|
||||
|
|
@ -0,0 +1,19 @@
|
|||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright (C) 2014 Vladimir Serbinenko
|
||||
* Copyright (C) 2018 Patrick Rudolph <siro@das-labor.org>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; version 2 of
|
||||
* the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#define SUPERIO_DEV SIO0
|
||||
#define SUPERIO_PNP_BASE 0x2e
|
||||
|
|
@ -0,0 +1,85 @@
|
|||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright (C) 2008-2009 coresystems GmbH
|
||||
* Copyright (C) 2014 Vladimir Serbinenko
|
||||
* Copyright (C) 2018 Patrick Rudolph <siro@das-labor.org>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; version 2 of
|
||||
* the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include <stdint.h>
|
||||
#include <arch/byteorder.h>
|
||||
#include <arch/io.h>
|
||||
#include <device/pci_ops.h>
|
||||
#include <device/pci_def.h>
|
||||
#include <device/pnp_def.h>
|
||||
#include <superio/nuvoton/npcd378/npcd378.h>
|
||||
#include <superio/nuvoton/common/nuvoton.h>
|
||||
#include <northbridge/intel/sandybridge/sandybridge.h>
|
||||
#include <northbridge/intel/sandybridge/raminit_native.h>
|
||||
#include <southbridge/intel/bd82x6x/pch.h>
|
||||
|
||||
#define SERIAL_DEV PNP_DEV(0x2e, NPCD378_SP2)
|
||||
|
||||
void pch_enable_lpc(void)
|
||||
{
|
||||
/*
|
||||
* Enable SuperIO, TPM, Keyboard, LPT, COMA
|
||||
* (COMB can be equip on expansion header)
|
||||
*/
|
||||
pci_write_config16(PCH_LPC_DEV, LPC_EN,
|
||||
CNF2_LPC_EN | CNF1_LPC_EN | KBC_LPC_EN | LPT_LPC_EN |
|
||||
COMB_LPC_EN | COMA_LPC_EN);
|
||||
|
||||
/* COMA: 3F8h, COMB: 2F8h */
|
||||
pci_write_config16(PCH_LPC_DEV, LPC_IO_DEC, 0x0010);
|
||||
}
|
||||
|
||||
void mainboard_rcba_config(void)
|
||||
{
|
||||
}
|
||||
|
||||
const struct southbridge_usb_port mainboard_usb_ports[] = {
|
||||
{ 1, 0, 0 },
|
||||
{ 1, 0, 0 },
|
||||
{ 1, 0, 0 },
|
||||
{ 1, 0, 0 },
|
||||
{ 1, 0, 3 },
|
||||
{ 1, 0, 3 },
|
||||
{ 1, 0, 3 },
|
||||
{ 1, 0, 3 },
|
||||
{ 1, 1, 5 },
|
||||
{ 1, 0, 5 },
|
||||
{ 1, 0, 5 },
|
||||
{ 1, 0, 5 },
|
||||
{ 1, 0, 7 },
|
||||
{ 1, 0, 7 },
|
||||
};
|
||||
|
||||
void mainboard_early_init(int s3resume)
|
||||
{
|
||||
}
|
||||
|
||||
void mainboard_config_superio(void)
|
||||
{
|
||||
if (CONFIG(CONSOLE_SERIAL))
|
||||
nuvoton_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
|
||||
}
|
||||
|
||||
void mainboard_get_spd(spd_raw_data *spd, bool id_only)
|
||||
{
|
||||
/* BTX mainboard: Reversed mapping */
|
||||
read_spd(&spd[3], 0x50, id_only);
|
||||
read_spd(&spd[2], 0x51, id_only);
|
||||
read_spd(&spd[1], 0x52, id_only);
|
||||
read_spd(&spd[0], 0x53, id_only);
|
||||
}
|
||||
Loading…
Reference in New Issue