diff --git a/src/mainboard/google/brya/variants/kuldax/overridetree.cb b/src/mainboard/google/brya/variants/kuldax/overridetree.cb
index a8fa978a68..50b2e39f47 100644
--- a/src/mainboard/google/brya/variants/kuldax/overridetree.cb
+++ b/src/mainboard/google/brya/variants/kuldax/overridetree.cb
@@ -180,7 +180,8 @@ chip soc/intel/alderlake
 					chip drivers/usb/acpi
 						register "desc" = ""USB3 Type-C Port C0 (MLB)""
 						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
-						register "group" = "ACPI_PLD_GROUP(1, 1)"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_C(BACK, RIGHT, ACPI_PLD_GROUP(1, 1))"
 						device ref tcss_usb3_port1 on end
 					end
 				end
@@ -192,31 +193,36 @@ chip soc/intel/alderlake
 					chip drivers/usb/acpi
 						register "desc" = ""USB2 Type-C Port C0 (MLB)""
 						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
-						register "group" = "ACPI_PLD_GROUP(1, 1)"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_C(BACK, RIGHT, ACPI_PLD_GROUP(1, 1))"
 						device ref usb2_port1 on end
 					end
 					chip drivers/usb/acpi
 						register "desc" = ""USB2 Type-A Port A3 (MLB)""
 						register "type" = "UPC_TYPE_A"
-						register "group" = "ACPI_PLD_GROUP(5, 1)"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_A(BACK, LEFT, ACPI_PLD_GROUP(5, 1))"
 						device ref usb2_port6 on end
 					end
 					chip drivers/usb/acpi
 						register "desc" = ""USB2 Type-A Port A2 (MLB)""
 						register "type" = "UPC_TYPE_A"
-						register "group" = "ACPI_PLD_GROUP(6, 1)"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_A(BACK, CENTER, ACPI_PLD_GROUP(6, 1))"
 						device ref usb2_port7 on end
 					end
 					chip drivers/usb/acpi
 						register "desc" = ""USB2 Type-A Port A1 (MLB)""
 						register "type" = "UPC_TYPE_A"
-						register "group" = "ACPI_PLD_GROUP(4, 1)"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_A(FRONT, LEFT, ACPI_PLD_GROUP(4, 1))"
 						device ref usb2_port8 on end
 					end
 					chip drivers/usb/acpi
 						register "desc" = ""USB2 Type-A Port A0 (MLB)""
 						register "type" = "UPC_TYPE_A"
-						register "group" = "ACPI_PLD_GROUP(1, 2)"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_A(FRONT, RIGHT, ACPI_PLD_GROUP(1, 2))"
 						device ref usb2_port9 on end
 					end
 					chip drivers/usb/acpi
@@ -229,25 +235,29 @@ chip soc/intel/alderlake
 					chip drivers/usb/acpi
 						register "desc" = ""USB3 Type-A Port A0 (MLB)""
 						register "type" = "UPC_TYPE_USB3_A"
-						register "group" = "ACPI_PLD_GROUP(1, 2)"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_A(FRONT, RIGHT, ACPI_PLD_GROUP(1, 2))"
 						device ref usb3_port1 on end
 					end
 					chip drivers/usb/acpi
 						register "desc" = ""USB3 Type-A Port A1 (MLB)""
 						register "type" = "UPC_TYPE_USB3_A"
-						register "group" = "ACPI_PLD_GROUP(4, 1)"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_A(FRONT, LEFT, ACPI_PLD_GROUP(4, 1))"
 						device ref usb3_port2 on end
 					end
 					chip drivers/usb/acpi
 						register "desc" = ""USB3 Type-A Port A2 (MLB)""
 						register "type" = "UPC_TYPE_USB3_A"
-						register "group" = "ACPI_PLD_GROUP(6, 1)"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_A(BACK, CENTER, ACPI_PLD_GROUP(6, 1))"
 						device ref usb3_port3 on end
 					end
 					chip drivers/usb/acpi
 						register "desc" = ""USB3 Type-A Port A3 (MLB)""
 						register "type" = "UPC_TYPE_USB3_A"
-						register "group" = "ACPI_PLD_GROUP(5, 1)"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_A(BACK, LEFT, ACPI_PLD_GROUP(5, 1))"
 						device ref usb3_port4 on end
 					end
 				end