- Factoring of auto.c
- Implementation of fallback/normal support for the amd solo board - Minor bugfix in romcc git-svn-id: svn://svn.coreboot.org/coreboot/trunk@867 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Eric Biederman
parent
c927b022c2
commit
05f26fcb57
|
|
@ -53,6 +53,9 @@ static void wrmsr(unsigned long index, msr_t msr)
|
||||||
(((FN) & 0x07) << 8) | \
|
(((FN) & 0x07) << 8) | \
|
||||||
((WHERE) & 0xFF))
|
((WHERE) & 0xFF))
|
||||||
|
|
||||||
|
#define PCI_ID(VENDOR_ID, DEVICE_ID) \
|
||||||
|
((((DEVICE_ID) & 0xFFFF) << 16) | ((VENDOR_ID) & 0xFFFF))
|
||||||
|
|
||||||
static unsigned char pci_read_config8(unsigned addr)
|
static unsigned char pci_read_config8(unsigned addr)
|
||||||
{
|
{
|
||||||
outl(0x80000000 | (addr & ~3), 0xCF8);
|
outl(0x80000000 | (addr & ~3), 0xCF8);
|
||||||
|
|
@ -88,3 +91,16 @@ static void pci_write_config32(unsigned addr, unsigned int value)
|
||||||
outl(0x80000000 | (addr & ~3), 0xCF8);
|
outl(0x80000000 | (addr & ~3), 0xCF8);
|
||||||
outl(value, 0xCFC);
|
outl(value, 0xCFC);
|
||||||
}
|
}
|
||||||
|
|
||||||
|
static unsigned pci_locate_device(unsigned pci_id, unsigned addr)
|
||||||
|
{
|
||||||
|
addr &= ~0xff;
|
||||||
|
for(; addr <= PCI_ADDR(255, 31, 7, 0); addr += PCI_ADDR(0,0,1,0)) {
|
||||||
|
unsigned int id;
|
||||||
|
id = pci_read_config32(addr);
|
||||||
|
if (id == pci_id) {
|
||||||
|
return addr;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
return ~0U;
|
||||||
|
}
|
||||||
|
|
|
||||||
|
|
@ -136,3 +136,12 @@ static void console_init(void)
|
||||||
" starting...\r\n";
|
" starting...\r\n";
|
||||||
print_info(console_test);
|
print_info(console_test);
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
||||||
|
static void die(const char *str)
|
||||||
|
{
|
||||||
|
print_emerg(str);
|
||||||
|
do {
|
||||||
|
hlt();
|
||||||
|
} while(1);
|
||||||
|
}
|
||||||
|
|
|
||||||
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,26 @@
|
||||||
|
#define ASSEMBLY 1
|
||||||
|
#include <stdint.h>
|
||||||
|
#include <device/pci_def.h>
|
||||||
|
#include <device/pci_ids.h>
|
||||||
|
#include "arch/romcc_io.h"
|
||||||
|
#include "pc80/mc146818rtc_early.c"
|
||||||
|
#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
|
||||||
|
#include "northbridge/amd/amdk8/early_ht.c"
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
static void main(void)
|
||||||
|
{
|
||||||
|
if (do_normal_boot()) {
|
||||||
|
/* Nothing special needs to be done to find bus 0 */
|
||||||
|
|
||||||
|
/* Allow the HT devices to be found */
|
||||||
|
enumerate_ht_chain();
|
||||||
|
|
||||||
|
/* Setup the 8111 */
|
||||||
|
amd8111_enable_rom();
|
||||||
|
|
||||||
|
/* Jump to the normal image */
|
||||||
|
asm("jmp __normal_image");
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,591 @@
|
||||||
|
static void setup_coherent_ht_domain(void)
|
||||||
|
{
|
||||||
|
static const unsigned int register_values[] = {
|
||||||
|
/* Routing Table Node i
|
||||||
|
* F0:0x40 i = 0,
|
||||||
|
* F0:0x44 i = 1,
|
||||||
|
* F0:0x48 i = 2,
|
||||||
|
* F0:0x4c i = 3,
|
||||||
|
* F0:0x50 i = 4,
|
||||||
|
* F0:0x54 i = 5,
|
||||||
|
* F0:0x58 i = 6,
|
||||||
|
* F0:0x5c i = 7
|
||||||
|
* [ 0: 3] Request Route
|
||||||
|
* [0] Route to this node
|
||||||
|
* [1] Route to Link 0
|
||||||
|
* [2] Route to Link 1
|
||||||
|
* [3] Route to Link 2
|
||||||
|
* [11: 8] Response Route
|
||||||
|
* [0] Route to this node
|
||||||
|
* [1] Route to Link 0
|
||||||
|
* [2] Route to Link 1
|
||||||
|
* [3] Route to Link 2
|
||||||
|
* [19:16] Broadcast route
|
||||||
|
* [0] Route to this node
|
||||||
|
* [1] Route to Link 0
|
||||||
|
* [2] Route to Link 1
|
||||||
|
* [3] Route to Link 2
|
||||||
|
*/
|
||||||
|
PCI_ADDR(0, 0x18, 0, 0x40), 0xfff0f0f0, 0x00010101,
|
||||||
|
PCI_ADDR(0, 0x18, 0, 0x44), 0xfff0f0f0, 0x00010101,
|
||||||
|
PCI_ADDR(0, 0x18, 0, 0x48), 0xfff0f0f0, 0x00010101,
|
||||||
|
PCI_ADDR(0, 0x18, 0, 0x4c), 0xfff0f0f0, 0x00010101,
|
||||||
|
PCI_ADDR(0, 0x18, 0, 0x50), 0xfff0f0f0, 0x00010101,
|
||||||
|
PCI_ADDR(0, 0x18, 0, 0x54), 0xfff0f0f0, 0x00010101,
|
||||||
|
PCI_ADDR(0, 0x18, 0, 0x58), 0xfff0f0f0, 0x00010101,
|
||||||
|
PCI_ADDR(0, 0x18, 0, 0x5c), 0xfff0f0f0, 0x00010101,
|
||||||
|
|
||||||
|
/* Hypetransport Transaction Control Register
|
||||||
|
* F0:0x68
|
||||||
|
* [ 0: 0] Disable read byte probe
|
||||||
|
* 0 = Probes issues
|
||||||
|
* 1 = Probes not issued
|
||||||
|
* [ 1: 1] Disable Read Doubleword probe
|
||||||
|
* 0 = Probes issued
|
||||||
|
* 1 = Probes not issued
|
||||||
|
* [ 2: 2] Disable write byte probes
|
||||||
|
* 0 = Probes issued
|
||||||
|
* 1 = Probes not issued
|
||||||
|
* [ 3: 3] Disable Write Doubleword Probes
|
||||||
|
* 0 = Probes issued
|
||||||
|
* 1 = Probes not issued.
|
||||||
|
* [ 4: 4] Disable Memroy Controller Target Start
|
||||||
|
* 0 = TgtStart packets are generated
|
||||||
|
* 1 = TgtStart packets are not generated.
|
||||||
|
* [ 5: 5] CPU1 Enable
|
||||||
|
* 0 = Second CPU disabled or not present
|
||||||
|
* 1 = Second CPU enabled.
|
||||||
|
* [ 6: 6] CPU Request PassPW
|
||||||
|
* 0 = CPU requests do not pass posted writes
|
||||||
|
* 1 = CPU requests pass posted writes.
|
||||||
|
* [ 7: 7] CPU read Respons PassPW
|
||||||
|
* 0 = CPU Responses do not pass posted writes
|
||||||
|
* 1 = CPU responses pass posted writes.
|
||||||
|
* [ 8: 8] Disable Probe Memory Cancel
|
||||||
|
* 0 = Probes may generate MemCancels
|
||||||
|
* 1 = Probes may not generate MemCancels
|
||||||
|
* [ 9: 9] Disable Remote Probe Memory Cancel.
|
||||||
|
* 0 = Probes hitting dirty blocks generate memory cancel packets
|
||||||
|
* 1 = Only probed caches on the same node as the memory controller
|
||||||
|
* generate cancel packets.
|
||||||
|
* [10:10] Disable Fill Probe
|
||||||
|
* 0 = Probes issued for cache fills
|
||||||
|
* 1 = Probes not issued for cache fills.
|
||||||
|
* [11:11] Response PassPw
|
||||||
|
* 0 = Downstream response PassPW based on original request
|
||||||
|
* 1 = Downstream response PassPW set to 1
|
||||||
|
* [12:12] Change ISOC to Ordered
|
||||||
|
* 0 = Bit 1 of coherent HT RdSz/WrSz command used for iosynchronous prioritization
|
||||||
|
* 1 = Bit 1 of coherent HT RdSz/WrSz command used for ordering.
|
||||||
|
* [14:13] Buffer Release Priority select
|
||||||
|
* 00 = 64
|
||||||
|
* 01 = 16
|
||||||
|
* 10 = 8
|
||||||
|
* 11 = 2
|
||||||
|
* [15:15] Limit Coherent HT Configuration Space Range
|
||||||
|
* 0 = No coherent HT configuration space restrictions
|
||||||
|
* 1 = Limit coherent HT configuration space based on node count
|
||||||
|
* [16:16] Local Interrupt Conversion Enable.
|
||||||
|
* 0 = ExtInt/NMI interrups unaffected.
|
||||||
|
* 1 = ExtInt/NMI broadcat interrupts converted to LINT0/1
|
||||||
|
* [17:17] APIC Extended Broadcast Enable.
|
||||||
|
* 0 = APIC broadcast is 0F
|
||||||
|
* 1 = APIC broadcast is FF
|
||||||
|
* [18:18] APIC Extended ID Enable
|
||||||
|
* 0 = APIC ID is 4 bits.
|
||||||
|
* 1 = APIC ID is 8 bits.
|
||||||
|
* [19:19] APIC Extended Spurious Vector Enable
|
||||||
|
* 0 = Lower 4 bits of spurious vector are read-only 1111
|
||||||
|
* 1 = Lower 4 bits of spurious vecotr are writeable.
|
||||||
|
* [20:20] Sequence ID Source Node Enable
|
||||||
|
* 0 = Normal operation
|
||||||
|
* 1 = Keep SeqID on routed packets for debugging.
|
||||||
|
* [22:21] Downstream non-posted request limit
|
||||||
|
* 00 = No limit
|
||||||
|
* 01 = Limited to 1
|
||||||
|
* 10 = Limited to 4
|
||||||
|
* 11 = Limited to 8
|
||||||
|
* [23:23] RESERVED
|
||||||
|
* [25:24] Medium-Priority Bypass Count
|
||||||
|
* - Maximum # of times a medium priority access can pass a low
|
||||||
|
* priority access before Medium-Priority mode is disabled for one access.
|
||||||
|
* [27:26] High-Priority Bypass Count
|
||||||
|
* - Maximum # of times a high prioirty access can pass a medium or low
|
||||||
|
* priority access before High-prioirty mode is disabled for one access.
|
||||||
|
* [28:28] Enable High Priority CPU Reads
|
||||||
|
* 0 = Cpu reads are medium prioirty
|
||||||
|
* 1 = Cpu reads are high prioirty
|
||||||
|
* [29:29] Disable Low Priority Writes
|
||||||
|
* 0 = Non-isochronous writes are low priority
|
||||||
|
* 1 = Non-isochronous writes are medium prioirty
|
||||||
|
* [30:30] Disable High Priority Isochronous writes
|
||||||
|
* 0 = Isochronous writes are high priority
|
||||||
|
* 1 = Isochronous writes are medium priority
|
||||||
|
* [31:31] Disable Medium Priority Isochronous writes
|
||||||
|
* 0 = Isochronous writes are medium are high
|
||||||
|
* 1 = With bit 30 set makes Isochrouns writes low priority.
|
||||||
|
*/
|
||||||
|
PCI_ADDR(0, 0x18, 0, 0x68), 0x00800000, 0x0f00840f,
|
||||||
|
/* HT Initialization Control Register
|
||||||
|
* F0:0x6C
|
||||||
|
* [ 0: 0] Routing Table Disable
|
||||||
|
* 0 = Packets are routed according to routing tables
|
||||||
|
* 1 = Packets are routed according to the default link field
|
||||||
|
* [ 1: 1] Request Disable (BSP should clear this)
|
||||||
|
* 0 = Request packets may be generated
|
||||||
|
* 1 = Request packets may not be generated.
|
||||||
|
* [ 3: 2] Default Link (Read-only)
|
||||||
|
* 00 = LDT0
|
||||||
|
* 01 = LDT1
|
||||||
|
* 10 = LDT2
|
||||||
|
* 11 = CPU on same node
|
||||||
|
* [ 4: 4] Cold Reset
|
||||||
|
* - Scratch bit cleared by a cold reset
|
||||||
|
* [ 5: 5] BIOS Reset Detect
|
||||||
|
* - Scratch bit cleared by a cold reset
|
||||||
|
* [ 6: 6] INIT Detect
|
||||||
|
* - Scratch bit cleared by a warm or cold reset not by an INIT
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
PCI_ADDR(0, 0x18, 0, 0x6C), 0xffffff8c, 0x00000000 | (1 << 6) |(1 << 5)| (1 << 4),
|
||||||
|
/* LDTi Capabilities Registers
|
||||||
|
* F0:0x80 i = 0,
|
||||||
|
* F0:0xA0 i = 1,
|
||||||
|
* F0:0xC0 i = 2,
|
||||||
|
*/
|
||||||
|
/* LDTi Link Control Registrs
|
||||||
|
* F0:0x84 i = 0,
|
||||||
|
* F0:0xA4 i = 1,
|
||||||
|
* F0:0xC4 i = 2,
|
||||||
|
* [ 1: 1] CRC Flood Enable
|
||||||
|
* 0 = Do not generate sync packets on CRC error
|
||||||
|
* 1 = Generate sync packets on CRC error
|
||||||
|
* [ 2: 2] CRC Start Test (Read-Only)
|
||||||
|
* [ 3: 3] CRC Force Frame Error
|
||||||
|
* 0 = Do not generate bad CRC
|
||||||
|
* 1 = Generate bad CRC
|
||||||
|
* [ 4: 4] Link Failure
|
||||||
|
* 0 = No link failure detected
|
||||||
|
* 1 = Link failure detected
|
||||||
|
* [ 5: 5] Initialization Complete
|
||||||
|
* 0 = Initialization not complete
|
||||||
|
* 1 = Initialization complete
|
||||||
|
* [ 6: 6] Receiver off
|
||||||
|
* 0 = Recevier on
|
||||||
|
* 1 = Receiver off
|
||||||
|
* [ 7: 7] Transmitter Off
|
||||||
|
* 0 = Transmitter on
|
||||||
|
* 1 = Transmitter off
|
||||||
|
* [ 9: 8] CRC_Error
|
||||||
|
* 00 = No error
|
||||||
|
* [0] = 1 Error on byte lane 0
|
||||||
|
* [1] = 1 Error on byte lane 1
|
||||||
|
* [12:12] Isochrnous Enable (Read-Only)
|
||||||
|
* [13:13] HT Stop Tristate Enable
|
||||||
|
* 0 = Driven during an LDTSTOP_L
|
||||||
|
* 1 = Tristated during and LDTSTOP_L
|
||||||
|
* [14:14] Extended CTL Time
|
||||||
|
* 0 = CTL is asserted for 16 bit times during link initialization
|
||||||
|
* 1 = CTL is asserted for 50us during link initialization
|
||||||
|
* [18:16] Max Link Width In (Read-Only?)
|
||||||
|
* 000 = 8 bit link
|
||||||
|
* 001 = 16bit link
|
||||||
|
* [19:19] Doubleword Flow Control in (Read-Only)
|
||||||
|
* 0 = This link does not support doubleword flow control
|
||||||
|
* 1 = This link supports doubleword flow control
|
||||||
|
* [22:20] Max Link Width Out (Read-Only?)
|
||||||
|
* 000 = 8 bit link
|
||||||
|
* 001 = 16bit link
|
||||||
|
* [23:23] Doubleworld Flow Control out (Read-Only)
|
||||||
|
* 0 = This link does not support doubleword flow control
|
||||||
|
* 1 = This link supports doubleworkd flow control
|
||||||
|
* [26:24] Link Width In
|
||||||
|
* 000 = Use 8 bits
|
||||||
|
* 001 = Use 16 bits
|
||||||
|
* 010 = reserved
|
||||||
|
* 011 = Use 32 bits
|
||||||
|
* 100 = Use 2 bits
|
||||||
|
* 101 = Use 4 bits
|
||||||
|
* 110 = reserved
|
||||||
|
* 111 = Link physically not connected
|
||||||
|
* [27:27] Doubleword Flow Control In Enable
|
||||||
|
* 0 = Doubleword flow control disabled
|
||||||
|
* 1 = Doubleword flow control enabled (Not currently supported)
|
||||||
|
* [30:28] Link Width Out
|
||||||
|
* 000 = Use 8 bits
|
||||||
|
* 001 = Use 16 bits
|
||||||
|
* 010 = reserved
|
||||||
|
* 011 = Use 32 bits
|
||||||
|
* 100 = Use 2 bits
|
||||||
|
* 101 = Use 4 bits
|
||||||
|
* 110 = reserved
|
||||||
|
* 111 = Link physically not connected
|
||||||
|
* [31:31] Doubleworld Flow Control Out Enable
|
||||||
|
* 0 = Doubleworld flow control disabled
|
||||||
|
* 1 = Doubleword flow control enabled (Not currently supported)
|
||||||
|
*/
|
||||||
|
PCI_ADDR(0, 0x18, 0, 0x84), 0x00009c05, 0x11110020,
|
||||||
|
/* LDTi Frequency/Revision Registers
|
||||||
|
* F0:0x88 i = 0,
|
||||||
|
* F0:0xA8 i = 1,
|
||||||
|
* F0:0xC8 i = 2,
|
||||||
|
* [ 4: 0] Minor Revision
|
||||||
|
* Contains the HT Minor revision
|
||||||
|
* [ 7: 5] Major Revision
|
||||||
|
* Contains the HT Major revision
|
||||||
|
* [11: 8] Link Frequency (Takes effect the next time the link is reconnected)
|
||||||
|
* 0000 = 200Mhz
|
||||||
|
* 0001 = reserved
|
||||||
|
* 0010 = 400Mhz
|
||||||
|
* 0011 = reserved
|
||||||
|
* 0100 = 600Mhz
|
||||||
|
* 0101 = 800Mhz
|
||||||
|
* 0110 = 1000Mhz
|
||||||
|
* 0111 = reserved
|
||||||
|
* 1000 = reserved
|
||||||
|
* 1001 = reserved
|
||||||
|
* 1010 = reserved
|
||||||
|
* 1011 = reserved
|
||||||
|
* 1100 = reserved
|
||||||
|
* 1101 = reserved
|
||||||
|
* 1110 = reserved
|
||||||
|
* 1111 = 100 Mhz
|
||||||
|
* [15:12] Error (Not currently Implemented)
|
||||||
|
* [31:16] Indicates the frequency capabilities of the link
|
||||||
|
* [16] = 1 encoding 0000 of freq supported
|
||||||
|
* [17] = 1 encoding 0001 of freq supported
|
||||||
|
* [18] = 1 encoding 0010 of freq supported
|
||||||
|
* [19] = 1 encoding 0011 of freq supported
|
||||||
|
* [20] = 1 encoding 0100 of freq supported
|
||||||
|
* [21] = 1 encoding 0101 of freq supported
|
||||||
|
* [22] = 1 encoding 0110 of freq supported
|
||||||
|
* [23] = 1 encoding 0111 of freq supported
|
||||||
|
* [24] = 1 encoding 1000 of freq supported
|
||||||
|
* [25] = 1 encoding 1001 of freq supported
|
||||||
|
* [26] = 1 encoding 1010 of freq supported
|
||||||
|
* [27] = 1 encoding 1011 of freq supported
|
||||||
|
* [28] = 1 encoding 1100 of freq supported
|
||||||
|
* [29] = 1 encoding 1101 of freq supported
|
||||||
|
* [30] = 1 encoding 1110 of freq supported
|
||||||
|
* [31] = 1 encoding 1111 of freq supported
|
||||||
|
*/
|
||||||
|
PCI_ADDR(0, 0x18, 0, 0x88), 0xfffff0ff, 0x00000200,
|
||||||
|
/* LDTi Feature Capability
|
||||||
|
* F0:0x8C i = 0,
|
||||||
|
* F0:0xAC i = 1,
|
||||||
|
* F0:0xCC i = 2,
|
||||||
|
*/
|
||||||
|
/* LDTi Buffer Count Registers
|
||||||
|
* F0:0x90 i = 0,
|
||||||
|
* F0:0xB0 i = 1,
|
||||||
|
* F0:0xD0 i = 2,
|
||||||
|
*/
|
||||||
|
/* LDTi Bus Number Registers
|
||||||
|
* F0:0x94 i = 0,
|
||||||
|
* F0:0xB4 i = 1,
|
||||||
|
* F0:0xD4 i = 2,
|
||||||
|
* For NonCoherent HT specifies the bus number downstream (behind the host bridge)
|
||||||
|
* [ 0: 7] Primary Bus Number
|
||||||
|
* [15: 8] Secondary Bus Number
|
||||||
|
* [23:15] Subordiante Bus Number
|
||||||
|
* [31:24] reserved
|
||||||
|
*/
|
||||||
|
PCI_ADDR(0, 0x18, 0, 0x94), 0xff000000, 0x00ff0000,
|
||||||
|
/* LDTi Type Registers
|
||||||
|
* F0:0x98 i = 0,
|
||||||
|
* F0:0xB8 i = 1,
|
||||||
|
* F0:0xD8 i = 2,
|
||||||
|
*/
|
||||||
|
/* Careful set limit registers before base registers which contain the enables */
|
||||||
|
/* DRAM Limit i Registers
|
||||||
|
* F1:0x44 i = 0
|
||||||
|
* F1:0x4C i = 1
|
||||||
|
* F1:0x54 i = 2
|
||||||
|
* F1:0x5C i = 3
|
||||||
|
* F1:0x64 i = 4
|
||||||
|
* F1:0x6C i = 5
|
||||||
|
* F1:0x74 i = 6
|
||||||
|
* F1:0x7C i = 7
|
||||||
|
* [ 2: 0] Destination Node ID
|
||||||
|
* 000 = Node 0
|
||||||
|
* 001 = Node 1
|
||||||
|
* 010 = Node 2
|
||||||
|
* 011 = Node 3
|
||||||
|
* 100 = Node 4
|
||||||
|
* 101 = Node 5
|
||||||
|
* 110 = Node 6
|
||||||
|
* 111 = Node 7
|
||||||
|
* [ 7: 3] Reserved
|
||||||
|
* [10: 8] Interleave select
|
||||||
|
* specifies the values of A[14:12] to use with interleave enable.
|
||||||
|
* [15:11] Reserved
|
||||||
|
* [31:16] DRAM Limit Address i Bits 39-24
|
||||||
|
* This field defines the upper address bits of a 40 bit address
|
||||||
|
* that define the end of the DRAM region.
|
||||||
|
*/
|
||||||
|
#if MEMORY_1024MB
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x003f0000,
|
||||||
|
#endif
|
||||||
|
#if MEMORY_512MB
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x001f0000,
|
||||||
|
#endif
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
|
||||||
|
/* DRAM Base i Registers
|
||||||
|
* F1:0x40 i = 0
|
||||||
|
* F1:0x48 i = 1
|
||||||
|
* F1:0x50 i = 2
|
||||||
|
* F1:0x58 i = 3
|
||||||
|
* F1:0x60 i = 4
|
||||||
|
* F1:0x68 i = 5
|
||||||
|
* F1:0x70 i = 6
|
||||||
|
* F1:0x78 i = 7
|
||||||
|
* [ 0: 0] Read Enable
|
||||||
|
* 0 = Reads Disabled
|
||||||
|
* 1 = Reads Enabled
|
||||||
|
* [ 1: 1] Write Enable
|
||||||
|
* 0 = Writes Disabled
|
||||||
|
* 1 = Writes Enabled
|
||||||
|
* [ 7: 2] Reserved
|
||||||
|
* [10: 8] Interleave Enable
|
||||||
|
* 000 = No interleave
|
||||||
|
* 001 = Interleave on A[12] (2 nodes)
|
||||||
|
* 010 = reserved
|
||||||
|
* 011 = Interleave on A[12] and A[14] (4 nodes)
|
||||||
|
* 100 = reserved
|
||||||
|
* 101 = reserved
|
||||||
|
* 110 = reserved
|
||||||
|
* 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
|
||||||
|
* [15:11] Reserved
|
||||||
|
* [13:16] DRAM Base Address i Bits 39-24
|
||||||
|
* This field defines the upper address bits of a 40-bit address
|
||||||
|
* that define the start of the DRAM region.
|
||||||
|
*/
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000003,
|
||||||
|
#if MEMORY_1024MB
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00400000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00400000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00400000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00400000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00400000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00400000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00400000,
|
||||||
|
#endif
|
||||||
|
#if MEMORY_512MB
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00200000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00200000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00200000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00200000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00200000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00200000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00200000,
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Memory-Mapped I/O Limit i Registers
|
||||||
|
* F1:0x84 i = 0
|
||||||
|
* F1:0x8C i = 1
|
||||||
|
* F1:0x94 i = 2
|
||||||
|
* F1:0x9C i = 3
|
||||||
|
* F1:0xA4 i = 4
|
||||||
|
* F1:0xAC i = 5
|
||||||
|
* F1:0xB4 i = 6
|
||||||
|
* F1:0xBC i = 7
|
||||||
|
* [ 2: 0] Destination Node ID
|
||||||
|
* 000 = Node 0
|
||||||
|
* 001 = Node 1
|
||||||
|
* 010 = Node 2
|
||||||
|
* 011 = Node 3
|
||||||
|
* 100 = Node 4
|
||||||
|
* 101 = Node 5
|
||||||
|
* 110 = Node 6
|
||||||
|
* 111 = Node 7
|
||||||
|
* [ 3: 3] Reserved
|
||||||
|
* [ 5: 4] Destination Link ID
|
||||||
|
* 00 = Link 0
|
||||||
|
* 01 = Link 1
|
||||||
|
* 10 = Link 2
|
||||||
|
* 11 = Reserved
|
||||||
|
* [ 6: 6] Reserved
|
||||||
|
* [ 7: 7] Non-Posted
|
||||||
|
* 0 = CPU writes may be posted
|
||||||
|
* 1 = CPU writes must be non-posted
|
||||||
|
* [31: 8] Memory-Mapped I/O Limit Address i (39-16)
|
||||||
|
* This field defines the upp adddress bits of a 40-bit address that
|
||||||
|
* defines the end of a memory-mapped I/O region n
|
||||||
|
*/
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00e1ff00,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00dfff00,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00e3ff00,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000b00,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00fe0b00,
|
||||||
|
|
||||||
|
/* Memory-Mapped I/O Base i Registers
|
||||||
|
* F1:0x80 i = 0
|
||||||
|
* F1:0x88 i = 1
|
||||||
|
* F1:0x90 i = 2
|
||||||
|
* F1:0x98 i = 3
|
||||||
|
* F1:0xA0 i = 4
|
||||||
|
* F1:0xA8 i = 5
|
||||||
|
* F1:0xB0 i = 6
|
||||||
|
* F1:0xB8 i = 7
|
||||||
|
* [ 0: 0] Read Enable
|
||||||
|
* 0 = Reads disabled
|
||||||
|
* 1 = Reads Enabled
|
||||||
|
* [ 1: 1] Write Enable
|
||||||
|
* 0 = Writes disabled
|
||||||
|
* 1 = Writes Enabled
|
||||||
|
* [ 2: 2] Cpu Disable
|
||||||
|
* 0 = Cpu can use this I/O range
|
||||||
|
* 1 = Cpu requests do not use this I/O range
|
||||||
|
* [ 3: 3] Lock
|
||||||
|
* 0 = base/limit registers i are read/write
|
||||||
|
* 1 = base/limit registers i are read-only
|
||||||
|
* [ 7: 4] Reserved
|
||||||
|
* [31: 8] Memory-Mapped I/O Base Address i (39-16)
|
||||||
|
* This field defines the upper address bits of a 40bit address
|
||||||
|
* that defines the start of memory-mapped I/O region i
|
||||||
|
*/
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00e00003,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00d80003,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00e20003,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000a03,
|
||||||
|
#if MEMORY_1024MB
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00400003,
|
||||||
|
#endif
|
||||||
|
#if MEMORY_512MB
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00200003,
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* PCI I/O Limit i Registers
|
||||||
|
* F1:0xC4 i = 0
|
||||||
|
* F1:0xCC i = 1
|
||||||
|
* F1:0xD4 i = 2
|
||||||
|
* F1:0xDC i = 3
|
||||||
|
* [ 2: 0] Destination Node ID
|
||||||
|
* 000 = Node 0
|
||||||
|
* 001 = Node 1
|
||||||
|
* 010 = Node 2
|
||||||
|
* 011 = Node 3
|
||||||
|
* 100 = Node 4
|
||||||
|
* 101 = Node 5
|
||||||
|
* 110 = Node 6
|
||||||
|
* 111 = Node 7
|
||||||
|
* [ 3: 3] Reserved
|
||||||
|
* [ 5: 4] Destination Link ID
|
||||||
|
* 00 = Link 0
|
||||||
|
* 01 = Link 1
|
||||||
|
* 10 = Link 2
|
||||||
|
* 11 = reserved
|
||||||
|
* [11: 6] Reserved
|
||||||
|
* [24:12] PCI I/O Limit Address i
|
||||||
|
* This field defines the end of PCI I/O region n
|
||||||
|
* [31:25] Reserved
|
||||||
|
*/
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x0000d000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x000ff000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
|
||||||
|
|
||||||
|
/* PCI I/O Base i Registers
|
||||||
|
* F1:0xC0 i = 0
|
||||||
|
* F1:0xC8 i = 1
|
||||||
|
* F1:0xD0 i = 2
|
||||||
|
* F1:0xD8 i = 3
|
||||||
|
* [ 0: 0] Read Enable
|
||||||
|
* 0 = Reads Disabled
|
||||||
|
* 1 = Reads Enabled
|
||||||
|
* [ 1: 1] Write Enable
|
||||||
|
* 0 = Writes Disabled
|
||||||
|
* 1 = Writes Enabled
|
||||||
|
* [ 3: 2] Reserved
|
||||||
|
* [ 4: 4] VGA Enable
|
||||||
|
* 0 = VGA matches Disabled
|
||||||
|
* 1 = matches all address < 64K and where A[9:0] is in the
|
||||||
|
* range 3B0-3BB or 3C0-3DF independen of the base & limit registers
|
||||||
|
* [ 5: 5] ISA Enable
|
||||||
|
* 0 = ISA matches Disabled
|
||||||
|
* 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
|
||||||
|
* from matching agains this base/limit pair
|
||||||
|
* [11: 6] Reserved
|
||||||
|
* [24:12] PCI I/O Base i
|
||||||
|
* This field defines the start of PCI I/O region n
|
||||||
|
* [31:25] Reserved
|
||||||
|
*/
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x0000d003,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00001013,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
|
||||||
|
|
||||||
|
/* Config Base and Limit i Registers
|
||||||
|
* F1:0xE0 i = 0
|
||||||
|
* F1:0xE4 i = 1
|
||||||
|
* F1:0xE8 i = 2
|
||||||
|
* F1:0xEC i = 3
|
||||||
|
* [ 0: 0] Read Enable
|
||||||
|
* 0 = Reads Disabled
|
||||||
|
* 1 = Reads Enabled
|
||||||
|
* [ 1: 1] Write Enable
|
||||||
|
* 0 = Writes Disabled
|
||||||
|
* 1 = Writes Enabled
|
||||||
|
* [ 2: 2] Device Number Compare Enable
|
||||||
|
* 0 = The ranges are based on bus number
|
||||||
|
* 1 = The ranges are ranges of devices on bus 0
|
||||||
|
* [ 3: 3] Reserved
|
||||||
|
* [ 6: 4] Destination Node
|
||||||
|
* 000 = Node 0
|
||||||
|
* 001 = Node 1
|
||||||
|
* 010 = Node 2
|
||||||
|
* 011 = Node 3
|
||||||
|
* 100 = Node 4
|
||||||
|
* 101 = Node 5
|
||||||
|
* 110 = Node 6
|
||||||
|
* 111 = Node 7
|
||||||
|
* [ 7: 7] Reserved
|
||||||
|
* [ 9: 8] Destination Link
|
||||||
|
* 00 = Link 0
|
||||||
|
* 01 = Link 1
|
||||||
|
* 10 = Link 2
|
||||||
|
* 11 - Reserved
|
||||||
|
* [15:10] Reserved
|
||||||
|
* [23:16] Bus Number Base i
|
||||||
|
* This field defines the lowest bus number in configuration region i
|
||||||
|
* [31:24] Bus Number Limit i
|
||||||
|
* This field defines the highest bus number in configuration regin i
|
||||||
|
*/
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
|
||||||
|
|
||||||
|
};
|
||||||
|
int i;
|
||||||
|
int max;
|
||||||
|
print_debug("setting up coherent ht domain....\r\n");
|
||||||
|
max = sizeof(register_values)/sizeof(register_values[0]);
|
||||||
|
for(i = 0; i < max; i += 3) {
|
||||||
|
unsigned long reg;
|
||||||
|
#if 0
|
||||||
|
print_debug_hex32(register_values[i]);
|
||||||
|
print_debug(" <-");
|
||||||
|
print_debug_hex32(register_values[i+2]);
|
||||||
|
print_debug("\r\n");
|
||||||
|
#endif
|
||||||
|
reg = pci_read_config32(register_values[i]);
|
||||||
|
reg &= register_values[i+1];
|
||||||
|
reg |= register_values[i+2] & ~register_values[i+1];
|
||||||
|
pci_write_config32(register_values[i], reg);
|
||||||
|
}
|
||||||
|
print_debug("done.\r\n");
|
||||||
|
}
|
||||||
|
|
||||||
|
|
@ -0,0 +1,49 @@
|
||||||
|
static void enumerate_ht_chain(void)
|
||||||
|
{
|
||||||
|
/* Assumption the HT chain that is bus 0 has the HT I/O Hub on it.
|
||||||
|
* On most boards this just happens. If a cpu has multiple
|
||||||
|
* non Coherent links the appropriate bus registers for the
|
||||||
|
* links needs to be programed to point at bus 0.
|
||||||
|
*/
|
||||||
|
unsigned next_unitid, last_unitid;;
|
||||||
|
next_unitid = 1;
|
||||||
|
do {
|
||||||
|
uint32_t id;
|
||||||
|
uint8_t hdr_type, pos;
|
||||||
|
last_unitid = next_unitid;
|
||||||
|
|
||||||
|
id = pci_read_config32(PCI_ADDR(0,0,0,PCI_VENDOR_ID));
|
||||||
|
/* If the chain is enumerated quit */
|
||||||
|
if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) ||
|
||||||
|
(((id >> 16) & 0xffff) == 0xffff) ||
|
||||||
|
(((id >> 16) & 0xffff) == 0x0000)) {
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
hdr_type = pci_read_config8(PCI_ADDR(0,0,0,PCI_HEADER_TYPE));
|
||||||
|
pos = 0;
|
||||||
|
hdr_type &= 0x7f;
|
||||||
|
|
||||||
|
if ((hdr_type == PCI_HEADER_TYPE_NORMAL) ||
|
||||||
|
(hdr_type == PCI_HEADER_TYPE_BRIDGE)) {
|
||||||
|
pos = pci_read_config8(PCI_ADDR(0,0,0, PCI_CAPABILITY_LIST));
|
||||||
|
}
|
||||||
|
while(pos != 0) {
|
||||||
|
uint8_t cap;
|
||||||
|
cap = pci_read_config8(PCI_ADDR(0,0,0, pos + PCI_CAP_LIST_ID));
|
||||||
|
if (cap == PCI_CAP_ID_HT) {
|
||||||
|
uint16_t flags;
|
||||||
|
flags = pci_read_config16(PCI_ADDR(0,0,0, pos + PCI_CAP_FLAGS));
|
||||||
|
if ((flags >> 13) == 0) {
|
||||||
|
unsigned count;
|
||||||
|
flags &= ~0x1f;
|
||||||
|
flags |= next_unitid & 0x1f;
|
||||||
|
count = (flags >> 5) & 0x1f;
|
||||||
|
pci_write_config16(PCI_ADDR(0, 0, 0, pos + PCI_CAP_FLAGS), flags);
|
||||||
|
next_unitid += count;
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
pos = pci_read_config8(PCI_ADDR(0, 0, 0, pos + PCI_CAP_LIST_NEXT));
|
||||||
|
}
|
||||||
|
} while((last_unitid != next_unitid) && (next_unitid <= 0x1f));
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,792 @@
|
||||||
|
#define MEMORY_512MB 0 /* SuSE Solo configuration */
|
||||||
|
#define MEMORY_1024MB 1 /* LNXI Solo configuration */
|
||||||
|
|
||||||
|
static void sdram_set_registers(void)
|
||||||
|
{
|
||||||
|
static const unsigned int register_values[] = {
|
||||||
|
/* Careful set limit registers before base registers which contain the enables */
|
||||||
|
/* DRAM Limit i Registers
|
||||||
|
* F1:0x44 i = 0
|
||||||
|
* F1:0x4C i = 1
|
||||||
|
* F1:0x54 i = 2
|
||||||
|
* F1:0x5C i = 3
|
||||||
|
* F1:0x64 i = 4
|
||||||
|
* F1:0x6C i = 5
|
||||||
|
* F1:0x74 i = 6
|
||||||
|
* F1:0x7C i = 7
|
||||||
|
* [ 2: 0] Destination Node ID
|
||||||
|
* 000 = Node 0
|
||||||
|
* 001 = Node 1
|
||||||
|
* 010 = Node 2
|
||||||
|
* 011 = Node 3
|
||||||
|
* 100 = Node 4
|
||||||
|
* 101 = Node 5
|
||||||
|
* 110 = Node 6
|
||||||
|
* 111 = Node 7
|
||||||
|
* [ 7: 3] Reserved
|
||||||
|
* [10: 8] Interleave select
|
||||||
|
* specifies the values of A[14:12] to use with interleave enable.
|
||||||
|
* [15:11] Reserved
|
||||||
|
* [31:16] DRAM Limit Address i Bits 39-24
|
||||||
|
* This field defines the upper address bits of a 40 bit address
|
||||||
|
* that define the end of the DRAM region.
|
||||||
|
*/
|
||||||
|
#if MEMORY_1024MB
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x003f0000,
|
||||||
|
#endif
|
||||||
|
#if MEMORY_512MB
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x001f0000,
|
||||||
|
#endif
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
|
||||||
|
/* DRAM Base i Registers
|
||||||
|
* F1:0x40 i = 0
|
||||||
|
* F1:0x48 i = 1
|
||||||
|
* F1:0x50 i = 2
|
||||||
|
* F1:0x58 i = 3
|
||||||
|
* F1:0x60 i = 4
|
||||||
|
* F1:0x68 i = 5
|
||||||
|
* F1:0x70 i = 6
|
||||||
|
* F1:0x78 i = 7
|
||||||
|
* [ 0: 0] Read Enable
|
||||||
|
* 0 = Reads Disabled
|
||||||
|
* 1 = Reads Enabled
|
||||||
|
* [ 1: 1] Write Enable
|
||||||
|
* 0 = Writes Disabled
|
||||||
|
* 1 = Writes Enabled
|
||||||
|
* [ 7: 2] Reserved
|
||||||
|
* [10: 8] Interleave Enable
|
||||||
|
* 000 = No interleave
|
||||||
|
* 001 = Interleave on A[12] (2 nodes)
|
||||||
|
* 010 = reserved
|
||||||
|
* 011 = Interleave on A[12] and A[14] (4 nodes)
|
||||||
|
* 100 = reserved
|
||||||
|
* 101 = reserved
|
||||||
|
* 110 = reserved
|
||||||
|
* 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
|
||||||
|
* [15:11] Reserved
|
||||||
|
* [13:16] DRAM Base Address i Bits 39-24
|
||||||
|
* This field defines the upper address bits of a 40-bit address
|
||||||
|
* that define the start of the DRAM region.
|
||||||
|
*/
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000003,
|
||||||
|
#if MEMORY_1024MB
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00400000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00400000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00400000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00400000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00400000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00400000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00400000,
|
||||||
|
#endif
|
||||||
|
#if MEMORY_512MB
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00200000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00200000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00200000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00200000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00200000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00200000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00200000,
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Memory-Mapped I/O Limit i Registers
|
||||||
|
* F1:0x84 i = 0
|
||||||
|
* F1:0x8C i = 1
|
||||||
|
* F1:0x94 i = 2
|
||||||
|
* F1:0x9C i = 3
|
||||||
|
* F1:0xA4 i = 4
|
||||||
|
* F1:0xAC i = 5
|
||||||
|
* F1:0xB4 i = 6
|
||||||
|
* F1:0xBC i = 7
|
||||||
|
* [ 2: 0] Destination Node ID
|
||||||
|
* 000 = Node 0
|
||||||
|
* 001 = Node 1
|
||||||
|
* 010 = Node 2
|
||||||
|
* 011 = Node 3
|
||||||
|
* 100 = Node 4
|
||||||
|
* 101 = Node 5
|
||||||
|
* 110 = Node 6
|
||||||
|
* 111 = Node 7
|
||||||
|
* [ 3: 3] Reserved
|
||||||
|
* [ 5: 4] Destination Link ID
|
||||||
|
* 00 = Link 0
|
||||||
|
* 01 = Link 1
|
||||||
|
* 10 = Link 2
|
||||||
|
* 11 = Reserved
|
||||||
|
* [ 6: 6] Reserved
|
||||||
|
* [ 7: 7] Non-Posted
|
||||||
|
* 0 = CPU writes may be posted
|
||||||
|
* 1 = CPU writes must be non-posted
|
||||||
|
* [31: 8] Memory-Mapped I/O Limit Address i (39-16)
|
||||||
|
* This field defines the upp adddress bits of a 40-bit address that
|
||||||
|
* defines the end of a memory-mapped I/O region n
|
||||||
|
*/
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00e1ff00,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00dfff00,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00e3ff00,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000b00,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00fe0b00,
|
||||||
|
|
||||||
|
/* Memory-Mapped I/O Base i Registers
|
||||||
|
* F1:0x80 i = 0
|
||||||
|
* F1:0x88 i = 1
|
||||||
|
* F1:0x90 i = 2
|
||||||
|
* F1:0x98 i = 3
|
||||||
|
* F1:0xA0 i = 4
|
||||||
|
* F1:0xA8 i = 5
|
||||||
|
* F1:0xB0 i = 6
|
||||||
|
* F1:0xB8 i = 7
|
||||||
|
* [ 0: 0] Read Enable
|
||||||
|
* 0 = Reads disabled
|
||||||
|
* 1 = Reads Enabled
|
||||||
|
* [ 1: 1] Write Enable
|
||||||
|
* 0 = Writes disabled
|
||||||
|
* 1 = Writes Enabled
|
||||||
|
* [ 2: 2] Cpu Disable
|
||||||
|
* 0 = Cpu can use this I/O range
|
||||||
|
* 1 = Cpu requests do not use this I/O range
|
||||||
|
* [ 3: 3] Lock
|
||||||
|
* 0 = base/limit registers i are read/write
|
||||||
|
* 1 = base/limit registers i are read-only
|
||||||
|
* [ 7: 4] Reserved
|
||||||
|
* [31: 8] Memory-Mapped I/O Base Address i (39-16)
|
||||||
|
* This field defines the upper address bits of a 40bit address
|
||||||
|
* that defines the start of memory-mapped I/O region i
|
||||||
|
*/
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00e00003,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00d80003,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00e20003,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000a03,
|
||||||
|
#if MEMORY_1024MB
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00400003,
|
||||||
|
#endif
|
||||||
|
#if MEMORY_512MB
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00200003,
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* PCI I/O Limit i Registers
|
||||||
|
* F1:0xC4 i = 0
|
||||||
|
* F1:0xCC i = 1
|
||||||
|
* F1:0xD4 i = 2
|
||||||
|
* F1:0xDC i = 3
|
||||||
|
* [ 2: 0] Destination Node ID
|
||||||
|
* 000 = Node 0
|
||||||
|
* 001 = Node 1
|
||||||
|
* 010 = Node 2
|
||||||
|
* 011 = Node 3
|
||||||
|
* 100 = Node 4
|
||||||
|
* 101 = Node 5
|
||||||
|
* 110 = Node 6
|
||||||
|
* 111 = Node 7
|
||||||
|
* [ 3: 3] Reserved
|
||||||
|
* [ 5: 4] Destination Link ID
|
||||||
|
* 00 = Link 0
|
||||||
|
* 01 = Link 1
|
||||||
|
* 10 = Link 2
|
||||||
|
* 11 = reserved
|
||||||
|
* [11: 6] Reserved
|
||||||
|
* [24:12] PCI I/O Limit Address i
|
||||||
|
* This field defines the end of PCI I/O region n
|
||||||
|
* [31:25] Reserved
|
||||||
|
*/
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x0000d000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x000ff000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
|
||||||
|
|
||||||
|
/* PCI I/O Base i Registers
|
||||||
|
* F1:0xC0 i = 0
|
||||||
|
* F1:0xC8 i = 1
|
||||||
|
* F1:0xD0 i = 2
|
||||||
|
* F1:0xD8 i = 3
|
||||||
|
* [ 0: 0] Read Enable
|
||||||
|
* 0 = Reads Disabled
|
||||||
|
* 1 = Reads Enabled
|
||||||
|
* [ 1: 1] Write Enable
|
||||||
|
* 0 = Writes Disabled
|
||||||
|
* 1 = Writes Enabled
|
||||||
|
* [ 3: 2] Reserved
|
||||||
|
* [ 4: 4] VGA Enable
|
||||||
|
* 0 = VGA matches Disabled
|
||||||
|
* 1 = matches all address < 64K and where A[9:0] is in the
|
||||||
|
* range 3B0-3BB or 3C0-3DF independen of the base & limit registers
|
||||||
|
* [ 5: 5] ISA Enable
|
||||||
|
* 0 = ISA matches Disabled
|
||||||
|
* 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
|
||||||
|
* from matching agains this base/limit pair
|
||||||
|
* [11: 6] Reserved
|
||||||
|
* [24:12] PCI I/O Base i
|
||||||
|
* This field defines the start of PCI I/O region n
|
||||||
|
* [31:25] Reserved
|
||||||
|
*/
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x0000d003,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00001013,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
|
||||||
|
|
||||||
|
/* Config Base and Limit i Registers
|
||||||
|
* F1:0xE0 i = 0
|
||||||
|
* F1:0xE4 i = 1
|
||||||
|
* F1:0xE8 i = 2
|
||||||
|
* F1:0xEC i = 3
|
||||||
|
* [ 0: 0] Read Enable
|
||||||
|
* 0 = Reads Disabled
|
||||||
|
* 1 = Reads Enabled
|
||||||
|
* [ 1: 1] Write Enable
|
||||||
|
* 0 = Writes Disabled
|
||||||
|
* 1 = Writes Enabled
|
||||||
|
* [ 2: 2] Device Number Compare Enable
|
||||||
|
* 0 = The ranges are based on bus number
|
||||||
|
* 1 = The ranges are ranges of devices on bus 0
|
||||||
|
* [ 3: 3] Reserved
|
||||||
|
* [ 6: 4] Destination Node
|
||||||
|
* 000 = Node 0
|
||||||
|
* 001 = Node 1
|
||||||
|
* 010 = Node 2
|
||||||
|
* 011 = Node 3
|
||||||
|
* 100 = Node 4
|
||||||
|
* 101 = Node 5
|
||||||
|
* 110 = Node 6
|
||||||
|
* 111 = Node 7
|
||||||
|
* [ 7: 7] Reserved
|
||||||
|
* [ 9: 8] Destination Link
|
||||||
|
* 00 = Link 0
|
||||||
|
* 01 = Link 1
|
||||||
|
* 10 = Link 2
|
||||||
|
* 11 - Reserved
|
||||||
|
* [15:10] Reserved
|
||||||
|
* [23:16] Bus Number Base i
|
||||||
|
* This field defines the lowest bus number in configuration region i
|
||||||
|
* [31:24] Bus Number Limit i
|
||||||
|
* This field defines the highest bus number in configuration regin i
|
||||||
|
*/
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
|
||||||
|
PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
|
||||||
|
|
||||||
|
/* DRAM CS Base Address i Registers
|
||||||
|
* F2:0x40 i = 0
|
||||||
|
* F2:0x44 i = 1
|
||||||
|
* F2:0x48 i = 2
|
||||||
|
* F2:0x4C i = 3
|
||||||
|
* F2:0x50 i = 4
|
||||||
|
* F2:0x54 i = 5
|
||||||
|
* F2:0x58 i = 6
|
||||||
|
* F2:0x5C i = 7
|
||||||
|
* [ 0: 0] Chip-Select Bank Enable
|
||||||
|
* 0 = Bank Disabled
|
||||||
|
* 1 = Bank Enabled
|
||||||
|
* [ 8: 1] Reserved
|
||||||
|
* [15: 9] Base Address (19-13)
|
||||||
|
* An optimization used when all DIMM are the same size...
|
||||||
|
* [20:16] Reserved
|
||||||
|
* [31:21] Base Address (35-25)
|
||||||
|
* This field defines the top 11 addresses bit of a 40-bit
|
||||||
|
* address that define the memory address space. These
|
||||||
|
* bits decode 32-MByte blocks of memory.
|
||||||
|
*/
|
||||||
|
PCI_ADDR(0, 0x18, 2, 0x40), 0x001f01fe, 0x00000001,
|
||||||
|
#if MEMORY_1024MB
|
||||||
|
PCI_ADDR(0, 0x18, 2, 0x44), 0x001f01fe, 0x01000001,
|
||||||
|
PCI_ADDR(0, 0x18, 2, 0x48), 0x001f01fe, 0x02000001,
|
||||||
|
PCI_ADDR(0, 0x18, 2, 0x4C), 0x001f01fe, 0x03000001,
|
||||||
|
#endif
|
||||||
|
#if MEMORY_512MB
|
||||||
|
PCI_ADDR(0, 0x18, 2, 0x44), 0x001f01fe, 0x00800001,
|
||||||
|
PCI_ADDR(0, 0x18, 2, 0x48), 0x001f01fe, 0x01000001,
|
||||||
|
PCI_ADDR(0, 0x18, 2, 0x4C), 0x001f01fe, 0x01800001,
|
||||||
|
#endif
|
||||||
|
PCI_ADDR(0, 0x18, 2, 0x50), 0x001f01fe, 0x00000000,
|
||||||
|
PCI_ADDR(0, 0x18, 2, 0x54), 0x001f01fe, 0x00000000,
|
||||||
|
PCI_ADDR(0, 0x18, 2, 0x58), 0x001f01fe, 0x00000000,
|
||||||
|
PCI_ADDR(0, 0x18, 2, 0x5C), 0x001f01fe, 0x00000000,
|
||||||
|
/* DRAM CS Mask Address i Registers
|
||||||
|
* F2:0x60 i = 0
|
||||||
|
* F2:0x64 i = 1
|
||||||
|
* F2:0x68 i = 2
|
||||||
|
* F2:0x6C i = 3
|
||||||
|
* F2:0x70 i = 4
|
||||||
|
* F2:0x74 i = 5
|
||||||
|
* F2:0x78 i = 6
|
||||||
|
* F2:0x7C i = 7
|
||||||
|
* Select bits to exclude from comparison with the DRAM Base address register.
|
||||||
|
* [ 8: 0] Reserved
|
||||||
|
* [15: 9] Address Mask (19-13)
|
||||||
|
* Address to be excluded from the optimized case
|
||||||
|
* [20:16] Reserved
|
||||||
|
* [29:21] Address Mask (33-25)
|
||||||
|
* The bits with an address mask of 1 are excluded from address comparison
|
||||||
|
* [31:30] Reserved
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
#if MEMORY_1024MB
|
||||||
|
PCI_ADDR(0, 0x18, 2, 0x60), 0xC01f01ff, 0x00e0fe00,
|
||||||
|
PCI_ADDR(0, 0x18, 2, 0x64), 0xC01f01ff, 0x00e0fe00,
|
||||||
|
PCI_ADDR(0, 0x18, 2, 0x68), 0xC01f01ff, 0x00e0fe00,
|
||||||
|
PCI_ADDR(0, 0x18, 2, 0x6C), 0xC01f01ff, 0x00e0fe00,
|
||||||
|
#endif
|
||||||
|
#if MEMORY_512MB
|
||||||
|
PCI_ADDR(0, 0x18, 2, 0x60), 0xC01f01ff, 0x0060fe00,
|
||||||
|
PCI_ADDR(0, 0x18, 2, 0x64), 0xC01f01ff, 0x0060fe00,
|
||||||
|
PCI_ADDR(0, 0x18, 2, 0x68), 0xC01f01ff, 0x0060fe00,
|
||||||
|
PCI_ADDR(0, 0x18, 2, 0x6C), 0xC01f01ff, 0x0060fe00,
|
||||||
|
#endif
|
||||||
|
PCI_ADDR(0, 0x18, 2, 0x70), 0xC01f01ff, 0x00000000,
|
||||||
|
PCI_ADDR(0, 0x18, 2, 0x74), 0xC01f01ff, 0x00000000,
|
||||||
|
PCI_ADDR(0, 0x18, 2, 0x78), 0xC01f01ff, 0x00000000,
|
||||||
|
PCI_ADDR(0, 0x18, 2, 0x7C), 0xC01f01ff, 0x00000000,
|
||||||
|
/* DRAM Bank Address Mapping Register
|
||||||
|
* F2:0x80
|
||||||
|
* Specify the memory module size
|
||||||
|
* [ 2: 0] CS1/0
|
||||||
|
* [ 6: 4] CS3/2
|
||||||
|
* [10: 8] CS5/4
|
||||||
|
* [14:12] CS7/6
|
||||||
|
* 000 = 32Mbyte (Rows = 12 & Col = 8)
|
||||||
|
* 001 = 64Mbyte (Rows = 12 & Col = 9)
|
||||||
|
* 010 = 128Mbyte (Rows = 13 & Col = 9)|(Rows = 12 & Col = 10)
|
||||||
|
* 011 = 256Mbyte (Rows = 13 & Col = 10)|(Rows = 12 & Col = 11)
|
||||||
|
* 100 = 512Mbyte (Rows = 13 & Col = 11)|(Rows = 14 & Col = 10)
|
||||||
|
* 101 = 1Gbyte (Rows = 14 & Col = 11)|(Rows = 13 & Col = 12)
|
||||||
|
* 110 = 2Gbyte (Rows = 14 & Col = 12)
|
||||||
|
* 111 = reserved
|
||||||
|
* [ 3: 3] Reserved
|
||||||
|
* [ 7: 7] Reserved
|
||||||
|
* [11:11] Reserved
|
||||||
|
* [31:15]
|
||||||
|
*/
|
||||||
|
#if MEMORY_1024MB
|
||||||
|
PCI_ADDR(0, 0x18, 2, 0x80), 0xffff8888, 0x00000033,
|
||||||
|
#endif
|
||||||
|
#if MEMORY_512MB
|
||||||
|
PCI_ADDR(0, 0x18, 2, 0x80), 0xffff8888, 0x00000022,
|
||||||
|
#endif
|
||||||
|
/* DRAM Timing Low Register
|
||||||
|
* F2:0x88
|
||||||
|
* [ 2: 0] Tcl (Cas# Latency, Cas# to read-data-valid)
|
||||||
|
* 000 = reserved
|
||||||
|
* 001 = CL 2
|
||||||
|
* 010 = CL 3
|
||||||
|
* 011 = reserved
|
||||||
|
* 100 = reserved
|
||||||
|
* 101 = CL 2.5
|
||||||
|
* 110 = reserved
|
||||||
|
* 111 = reserved
|
||||||
|
* [ 3: 3] Reserved
|
||||||
|
* [ 7: 4] Trc (Row Cycle Time, Ras#-active to Ras#-active/bank auto refresh)
|
||||||
|
* 0000 = 7 bus clocks
|
||||||
|
* 0001 = 8 bus clocks
|
||||||
|
* ...
|
||||||
|
* 1110 = 21 bus clocks
|
||||||
|
* 1111 = 22 bus clocks
|
||||||
|
* [11: 8] Trfc (Row refresh Cycle time, Auto-refresh-active to RAS#-active or RAS#auto-refresh)
|
||||||
|
* 0000 = 9 bus clocks
|
||||||
|
* 0010 = 10 bus clocks
|
||||||
|
* ....
|
||||||
|
* 1110 = 23 bus clocks
|
||||||
|
* 1111 = 24 bus clocks
|
||||||
|
* [14:12] Trcd (Ras#-active to Case#-read/write Delay)
|
||||||
|
* 000 = reserved
|
||||||
|
* 001 = reserved
|
||||||
|
* 010 = 2 bus clocks
|
||||||
|
* 011 = 3 bus clocks
|
||||||
|
* 100 = 4 bus clocks
|
||||||
|
* 101 = 5 bus clocks
|
||||||
|
* 110 = 6 bus clocks
|
||||||
|
* 111 = reserved
|
||||||
|
* [15:15] Reserved
|
||||||
|
* [18:16] Trrd (Ras# to Ras# Delay)
|
||||||
|
* 000 = reserved
|
||||||
|
* 001 = reserved
|
||||||
|
* 010 = 2 bus clocks
|
||||||
|
* 011 = 3 bus clocks
|
||||||
|
* 100 = 4 bus clocks
|
||||||
|
* 101 = reserved
|
||||||
|
* 110 = reserved
|
||||||
|
* 111 = reserved
|
||||||
|
* [19:19] Reserved
|
||||||
|
* [23:20] Tras (Minmum Ras# Active Time)
|
||||||
|
* 0000 to 0100 = reserved
|
||||||
|
* 0101 = 5 bus clocks
|
||||||
|
* ...
|
||||||
|
* 1111 = 15 bus clocks
|
||||||
|
* [26:24] Trp (Row Precharge Time)
|
||||||
|
* 000 = reserved
|
||||||
|
* 001 = reserved
|
||||||
|
* 010 = 2 bus clocks
|
||||||
|
* 011 = 3 bus clocks
|
||||||
|
* 100 = 4 bus clocks
|
||||||
|
* 101 = 5 bus clocks
|
||||||
|
* 110 = 6 bus clocks
|
||||||
|
* 111 = reserved
|
||||||
|
* [27:27] Reserved
|
||||||
|
* [28:28] Twr (Write Recovery Time)
|
||||||
|
* 0 = 2 bus clocks
|
||||||
|
* 1 = 3 bus clocks
|
||||||
|
* [31:29] Reserved
|
||||||
|
*/
|
||||||
|
PCI_ADDR(0, 0x18, 2, 0x88), 0xe8088008, 0x03623125,
|
||||||
|
/* DRAM Timing High Register
|
||||||
|
* F2:0x8C
|
||||||
|
* [ 0: 0] Twtr (Write to Read Delay)
|
||||||
|
* 0 = 1 bus Clocks
|
||||||
|
* 1 = 2 bus Clocks
|
||||||
|
* [ 3: 1] Reserved
|
||||||
|
* [ 6: 4] Trwf (Read to Write Delay)
|
||||||
|
* 000 = 1 bus clocks
|
||||||
|
* 001 = 2 bus clocks
|
||||||
|
* 010 = 3 bus clocks
|
||||||
|
* 011 = 4 bus clocks
|
||||||
|
* 100 = 5 bus clocks
|
||||||
|
* 101 = 6 bus clocks
|
||||||
|
* 110 = reserved
|
||||||
|
* 111 = reserved
|
||||||
|
* [ 7: 7] Reserved
|
||||||
|
* [12: 8] Tref (Refresh Rate)
|
||||||
|
* 00000 = 100Mhz 4K rows
|
||||||
|
* 00001 = 133Mhz 4K rows
|
||||||
|
* 00010 = 166Mhz 4K rows
|
||||||
|
* 01000 = 100Mhz 8K/16K rows
|
||||||
|
* 01001 = 133Mhz 8K/16K rows
|
||||||
|
* 01010 = 166Mhz 8K/16K rows
|
||||||
|
* [19:13] Reserved
|
||||||
|
* [22:20] Twcl (Write CAS Latency)
|
||||||
|
* 000 = 1 Mem clock after CAS# (Unbuffered Dimms)
|
||||||
|
* 001 = 2 Mem clocks after CAS# (Registered Dimms)
|
||||||
|
* [31:23] Reserved
|
||||||
|
*/
|
||||||
|
#if MEMORY_1024MB
|
||||||
|
PCI_ADDR(0, 0x18, 2, 0x8c), 0xff8fe08e, 0x00000930,
|
||||||
|
#endif
|
||||||
|
#if MEMORY_512MB
|
||||||
|
PCI_ADDR(0, 0x18, 2, 0x8c), 0xff8fe08e, 0x00000130,
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* DRAM Config Low Register
|
||||||
|
* F2:0x90
|
||||||
|
* [ 0: 0] DLL Disable
|
||||||
|
* 0 = Enabled
|
||||||
|
* 1 = Disabled
|
||||||
|
* [ 1: 1] D_DRV
|
||||||
|
* 0 = Normal Drive
|
||||||
|
* 1 = Weak Drive
|
||||||
|
* [ 2: 2] QFC_EN
|
||||||
|
* 0 = Disabled
|
||||||
|
* 1 = Enabled
|
||||||
|
* [ 3: 3] Disable DQS Hystersis (FIXME handle this one carefully)
|
||||||
|
* 0 = Enable DQS input filter
|
||||||
|
* 1 = Disable DQS input filtering
|
||||||
|
* [ 7: 4] Reserved
|
||||||
|
* [ 8: 8] DRAM_Init
|
||||||
|
* 0 = Initialization done or not yet started.
|
||||||
|
* 1 = Initiate DRAM intialization sequence
|
||||||
|
* [ 9: 9] SO-Dimm Enable
|
||||||
|
* 0 = Do nothing
|
||||||
|
* 1 = SO-Dimms present
|
||||||
|
* [10:10] DramEnable
|
||||||
|
* 0 = DRAM not enabled
|
||||||
|
* 1 = DRAM initialized and enabled
|
||||||
|
* [11:11] Memory Clear Status
|
||||||
|
* 0 = Memory Clear function has not completed
|
||||||
|
* 1 = Memory Clear function has completed
|
||||||
|
* [12:12] Exit Self-Refresh
|
||||||
|
* 0 = Exit from self-refresh done or not yet started
|
||||||
|
* 1 = DRAM exiting from self refresh
|
||||||
|
* [13:13] Self-Refresh Status
|
||||||
|
* 0 = Normal Operation
|
||||||
|
* 1 = Self-refresh mode active
|
||||||
|
* [15:14] Read/Write Queue Bypass Count
|
||||||
|
* 00 = 2
|
||||||
|
* 01 = 4
|
||||||
|
* 10 = 8
|
||||||
|
* 11 = 16
|
||||||
|
* [16:16] 128-bit/64-Bit
|
||||||
|
* 0 = 64bit Interface to DRAM
|
||||||
|
* 1 = 128bit Interface to DRAM
|
||||||
|
* [17:17] DIMM ECC Enable
|
||||||
|
* 0 = Some DIMMs do not have ECC
|
||||||
|
* 1 = ALL DIMMS have ECC bits
|
||||||
|
* [18:18] UnBuffered DIMMs
|
||||||
|
* 0 = Buffered DIMMS
|
||||||
|
* 1 = Unbuffered DIMMS
|
||||||
|
* [19:19] Enable 32-Byte Granularity
|
||||||
|
* 0 = Optimize for 64byte bursts
|
||||||
|
* 1 = Optimize for 32byte bursts
|
||||||
|
* [20:20] DIMM 0 is x4
|
||||||
|
* [21:21] DIMM 1 is x4
|
||||||
|
* [22:22] DIMM 2 is x4
|
||||||
|
* [23:23] DIMM 3 is x4
|
||||||
|
* 0 = DIMM is not x4
|
||||||
|
* 1 = x4 DIMM present
|
||||||
|
* [24:24] Disable DRAM Receivers
|
||||||
|
* 0 = Receivers enabled
|
||||||
|
* 1 = Receivers disabled
|
||||||
|
* [27:25] Bypass Max
|
||||||
|
* 000 = Arbiters chois is always respected
|
||||||
|
* 001 = Oldest entry in DCQ can be bypassed 1 time
|
||||||
|
* 010 = Oldest entry in DCQ can be bypassed 2 times
|
||||||
|
* 011 = Oldest entry in DCQ can be bypassed 3 times
|
||||||
|
* 100 = Oldest entry in DCQ can be bypassed 4 times
|
||||||
|
* 101 = Oldest entry in DCQ can be bypassed 5 times
|
||||||
|
* 110 = Oldest entry in DCQ can be bypassed 6 times
|
||||||
|
* 111 = Oldest entry in DCQ can be bypassed 7 times
|
||||||
|
* [31:28] Reserved
|
||||||
|
*/
|
||||||
|
PCI_ADDR(0, 0x18, 2, 0x90), 0xf0000000,
|
||||||
|
(4 << 25)|(0 << 24)|
|
||||||
|
(0 << 23)|(0 << 22)|(0 << 21)|(0 << 20)|
|
||||||
|
(1 << 19)|(1 << 18)|(0 << 17)|(0 << 16)|
|
||||||
|
(2 << 14)|(0 << 13)|(0 << 12)|
|
||||||
|
(0 << 11)|(0 << 10)|(0 << 9)|(0 << 8)|
|
||||||
|
(0 << 3) |(0 << 1) |(0 << 0),
|
||||||
|
/* DRAM Config High Register
|
||||||
|
* F2:0x94
|
||||||
|
* [ 0: 3] Maximum Asynchronous Latency
|
||||||
|
* 0000 = 0 ns
|
||||||
|
* ...
|
||||||
|
* 1111 = 15 ns
|
||||||
|
* [ 7: 4] Reserved
|
||||||
|
* [11: 8] Read Preamble
|
||||||
|
* 0000 = 2.0 ns
|
||||||
|
* 0001 = 2.5 ns
|
||||||
|
* 0010 = 3.0 ns
|
||||||
|
* 0011 = 3.5 ns
|
||||||
|
* 0100 = 4.0 ns
|
||||||
|
* 0101 = 4.5 ns
|
||||||
|
* 0110 = 5.0 ns
|
||||||
|
* 0111 = 5.5 ns
|
||||||
|
* 1000 = 6.0 ns
|
||||||
|
* 1001 = 6.5 ns
|
||||||
|
* 1010 = 7.0 ns
|
||||||
|
* 1011 = 7.5 ns
|
||||||
|
* 1100 = 8.0 ns
|
||||||
|
* 1101 = 8.5 ns
|
||||||
|
* 1110 = 9.0 ns
|
||||||
|
* 1111 = 9.5 ns
|
||||||
|
* [15:12] Reserved
|
||||||
|
* [18:16] Idle Cycle Limit
|
||||||
|
* 000 = 0 cycles
|
||||||
|
* 001 = 4 cycles
|
||||||
|
* 010 = 8 cycles
|
||||||
|
* 011 = 16 cycles
|
||||||
|
* 100 = 32 cycles
|
||||||
|
* 101 = 64 cycles
|
||||||
|
* 110 = 128 cycles
|
||||||
|
* 111 = 256 cycles
|
||||||
|
* [19:19] Dynamic Idle Cycle Center Enable
|
||||||
|
* 0 = Use Idle Cycle Limit
|
||||||
|
* 1 = Generate a dynamic Idle cycle limit
|
||||||
|
* [22:20] DRAM MEMCLK Frequency
|
||||||
|
* 000 = 100Mhz
|
||||||
|
* 001 = reserved
|
||||||
|
* 010 = 133Mhz
|
||||||
|
* 011 = reserved
|
||||||
|
* 100 = reserved
|
||||||
|
* 101 = 166Mhz
|
||||||
|
* 110 = reserved
|
||||||
|
* 111 = reserved
|
||||||
|
* [24:23] Reserved
|
||||||
|
* [25:25] Memory Clock Ratio Valid (FIXME carefully enable memclk)
|
||||||
|
* 0 = Disable MemClks
|
||||||
|
* 1 = Enable MemClks
|
||||||
|
* [26:26] Memory Clock 0 Enable
|
||||||
|
* 0 = Disabled
|
||||||
|
* 1 = Enabled
|
||||||
|
* [27:27] Memory Clock 1 Enable
|
||||||
|
* 0 = Disabled
|
||||||
|
* 1 = Enabled
|
||||||
|
* [28:28] Memory Clock 2 Enable
|
||||||
|
* 0 = Disabled
|
||||||
|
* 1 = Enabled
|
||||||
|
* [29:29] Memory Clock 3 Enable
|
||||||
|
* 0 = Disabled
|
||||||
|
* 1 = Enabled
|
||||||
|
* [31:30] Reserved
|
||||||
|
*/
|
||||||
|
#if MEMORY_1024MB
|
||||||
|
PCI_ADDR(0, 0x18, 2, 0x94), 0xc180f0f0, 0x0e2b0a05,
|
||||||
|
#endif
|
||||||
|
#if MEMORY_512MB
|
||||||
|
PCI_ADDR(0, 0x18, 2, 0x94), 0xc180f0f0, 0x0e2b0a06,
|
||||||
|
#endif
|
||||||
|
/* DRAM Delay Line Register
|
||||||
|
* F2:0x98
|
||||||
|
* Adjust the skew of the input DQS strobe relative to DATA
|
||||||
|
* [15: 0] Reserved
|
||||||
|
* [23:16] Delay Line Adjust
|
||||||
|
* Adjusts the DLL derived PDL delay by one or more delay stages
|
||||||
|
* in either the faster or slower direction.
|
||||||
|
* [24:24} Adjust Slower
|
||||||
|
* 0 = Do Nothing
|
||||||
|
* 1 = Adj is used to increase the PDL delay
|
||||||
|
* [25:25] Adjust Faster
|
||||||
|
* 0 = Do Nothing
|
||||||
|
* 1 = Adj is used to decrease the PDL delay
|
||||||
|
* [31:26] Reserved
|
||||||
|
*/
|
||||||
|
PCI_ADDR(0, 0x18, 2, 0x98), 0xfc00ffff, 0x00000000,
|
||||||
|
/* DRAM Scrub Control Register
|
||||||
|
* F3:0x58
|
||||||
|
* [ 4: 0] DRAM Scrube Rate
|
||||||
|
* [ 7: 5] reserved
|
||||||
|
* [12: 8] L2 Scrub Rate
|
||||||
|
* [15:13] reserved
|
||||||
|
* [20:16] Dcache Scrub
|
||||||
|
* [31:21] reserved
|
||||||
|
* Scrub Rates
|
||||||
|
* 00000 = Do not scrub
|
||||||
|
* 00001 = 40.00 ns
|
||||||
|
* 00010 = 80.00 ns
|
||||||
|
* 00011 = 160.00 ns
|
||||||
|
* 00100 = 320.00 ns
|
||||||
|
* 00101 = 640.00 ns
|
||||||
|
* 00110 = 1.28 us
|
||||||
|
* 00111 = 2.56 us
|
||||||
|
* 01000 = 5.12 us
|
||||||
|
* 01001 = 10.20 us
|
||||||
|
* 01011 = 41.00 us
|
||||||
|
* 01100 = 81.90 us
|
||||||
|
* 01101 = 163.80 us
|
||||||
|
* 01110 = 327.70 us
|
||||||
|
* 01111 = 655.40 us
|
||||||
|
* 10000 = 1.31 ms
|
||||||
|
* 10001 = 2.62 ms
|
||||||
|
* 10010 = 5.24 ms
|
||||||
|
* 10011 = 10.49 ms
|
||||||
|
* 10100 = 20.97 ms
|
||||||
|
* 10101 = 42.00 ms
|
||||||
|
* 10110 = 84.00 ms
|
||||||
|
* All Others = Reserved
|
||||||
|
*/
|
||||||
|
PCI_ADDR(0, 0x18, 3, 0x58), 0xffe0e0e0, 0x00000000,
|
||||||
|
/* DRAM Scrub Address Low Register
|
||||||
|
* F3:0x5C
|
||||||
|
* [ 0: 0] DRAM Scrubber Redirect Enable
|
||||||
|
* 0 = Do nothing
|
||||||
|
* 1 = Scrubber Corrects errors found in normal operation
|
||||||
|
* [ 5: 1] Reserved
|
||||||
|
* [31: 6] DRAM Scrub Address 31-6
|
||||||
|
*/
|
||||||
|
PCI_ADDR(0, 0x18, 3, 0x5C), 0x0000003e, 0x00000000,
|
||||||
|
/* DRAM Scrub Address High Register
|
||||||
|
* F3:0x60
|
||||||
|
* [ 7: 0] DRAM Scrubb Address 39-32
|
||||||
|
* [31: 8] Reserved
|
||||||
|
*/
|
||||||
|
PCI_ADDR(0, 0x18, 3, 0x60), 0xffffff00, 0x00000000,
|
||||||
|
};
|
||||||
|
int i;
|
||||||
|
int max;
|
||||||
|
print_debug("setting up CPU0 northbridge registers\r\n");
|
||||||
|
max = sizeof(register_values)/sizeof(register_values[0]);
|
||||||
|
for(i = 0; i < max; i += 3) {
|
||||||
|
unsigned long reg;
|
||||||
|
#if 0
|
||||||
|
print_debug_hex32(register_values[i]);
|
||||||
|
print_debug(" <-");
|
||||||
|
print_debug_hex32(register_values[i+2]);
|
||||||
|
print_debug("\r\n");
|
||||||
|
#endif
|
||||||
|
reg = pci_read_config32(register_values[i]);
|
||||||
|
reg &= register_values[i+1];
|
||||||
|
reg |= register_values[i+2];
|
||||||
|
pci_write_config32(register_values[i], reg);
|
||||||
|
}
|
||||||
|
print_debug("done.\r\n");
|
||||||
|
}
|
||||||
|
|
||||||
|
#define DRAM_CONFIG_LOW 0x90
|
||||||
|
#define DCL_DLL_Disable (1<<0)
|
||||||
|
#define DCL_D_DRV (1<<1)
|
||||||
|
#define DCL_QFC_EN (1<<2)
|
||||||
|
#define DCL_DisDqsHys (1<<3)
|
||||||
|
#define DCL_DramInit (1<<8)
|
||||||
|
#define DCL_DramEnable (1<<10)
|
||||||
|
#define DCL_MemClrStatus (1<<11)
|
||||||
|
#define DCL_DimmEcEn (1<<17)
|
||||||
|
|
||||||
|
#define NODE_ID 0x60
|
||||||
|
#define HT_INIT_CONTROL 0x6c
|
||||||
|
|
||||||
|
#define HTIC_ColdR_Detect (1<<4)
|
||||||
|
#define HTIC_BIOSR_Detect (1<<5)
|
||||||
|
#define HTIC_INIT_Detect (1<<6)
|
||||||
|
|
||||||
|
static void sdram_set_spd_registers(void)
|
||||||
|
{
|
||||||
|
unsigned long dcl;
|
||||||
|
dcl = pci_read_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW));
|
||||||
|
/* Until I know what is going on disable ECC support */
|
||||||
|
dcl &= ~DCL_DimmEcEn;
|
||||||
|
pci_write_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW), dcl);
|
||||||
|
}
|
||||||
|
|
||||||
|
#define TIMEOUT_LOOPS 300000
|
||||||
|
static void sdram_enable(void)
|
||||||
|
{
|
||||||
|
unsigned long dcl;
|
||||||
|
|
||||||
|
/* Toggle DisDqsHys to get it working */
|
||||||
|
dcl = pci_read_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW));
|
||||||
|
print_debug("dcl: ");
|
||||||
|
print_debug_hex32(dcl);
|
||||||
|
print_debug("\r\n");
|
||||||
|
dcl |= DCL_DisDqsHys;
|
||||||
|
pci_write_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW), dcl);
|
||||||
|
dcl &= ~DCL_DisDqsHys;
|
||||||
|
dcl &= ~DCL_DLL_Disable;
|
||||||
|
dcl &= ~DCL_D_DRV;
|
||||||
|
dcl &= ~DCL_QFC_EN;
|
||||||
|
dcl |= DCL_DramInit;
|
||||||
|
pci_write_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW), dcl);
|
||||||
|
|
||||||
|
print_debug("Initializing memory: ");
|
||||||
|
int loops = 0;
|
||||||
|
do {
|
||||||
|
dcl = pci_read_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW));
|
||||||
|
loops += 1;
|
||||||
|
if ((loops & 1023) == 0) {
|
||||||
|
print_debug(".");
|
||||||
|
}
|
||||||
|
} while(((dcl & DCL_DramInit) != 0) && (loops < TIMEOUT_LOOPS));
|
||||||
|
if (loops >= TIMEOUT_LOOPS) {
|
||||||
|
print_debug(" failed\r\n");
|
||||||
|
} else {
|
||||||
|
print_debug(" done\r\n");
|
||||||
|
}
|
||||||
|
|
||||||
|
#if 0
|
||||||
|
print_debug("Clearing memory: ");
|
||||||
|
loops = 0;
|
||||||
|
do {
|
||||||
|
dcl = pci_read_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW));
|
||||||
|
loops += 1;
|
||||||
|
if ((loops & 1023) == 0) {
|
||||||
|
print_debug(" ");
|
||||||
|
print_debug_hex32(loops);
|
||||||
|
}
|
||||||
|
} while(((dcl & DCL_MemClrStatus) == 0) && (loops < TIMEOUT_LOOPS));
|
||||||
|
if (loops >= TIMEOUT_LOOPS) {
|
||||||
|
print_debug("failed\r\n");
|
||||||
|
} else {
|
||||||
|
print_debug("done\r\n");
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
|
||||||
|
static void sdram_first_normal_reference(void) {}
|
||||||
|
static void sdram_enable_refresh(void) {}
|
||||||
|
static void sdram_special_finishup(void) {}
|
||||||
|
|
||||||
|
|
@ -0,0 +1,84 @@
|
||||||
|
#include <pc80/mc146818rtc.h>
|
||||||
|
#include <part/fallback_boot.h>
|
||||||
|
|
||||||
|
static unsigned char cmos_read(unsigned char addr)
|
||||||
|
{
|
||||||
|
outb(addr, RTC_BASE_PORT + 0);
|
||||||
|
return inb(RTC_BASE_PORT + 1);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void cmos_write(unsigned char val, unsigned char addr)
|
||||||
|
{
|
||||||
|
outb(addr, RTC_BASE_PORT + 0);
|
||||||
|
outb(val, RTC_BASE_PORT + 1);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int cmos_error(void)
|
||||||
|
{
|
||||||
|
unsigned char reg_d;
|
||||||
|
/* See if the cmos error condition has been flagged */
|
||||||
|
reg_d = cmos_read(RTC_REG_D);
|
||||||
|
return (reg_d & RTC_VRT) == 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int cmos_chksum_valid(void)
|
||||||
|
{
|
||||||
|
unsigned char addr;
|
||||||
|
unsigned long sum, old_sum;
|
||||||
|
sum = 0;
|
||||||
|
/* Comput the cmos checksum */
|
||||||
|
for(addr = LB_CKS_RANGE_START; addr <= LB_CKS_RANGE_END; addr++) {
|
||||||
|
sum += cmos_read(addr);
|
||||||
|
}
|
||||||
|
sum = (sum & 0xffff) ^ 0xffff;
|
||||||
|
|
||||||
|
/* Read the stored checksum */
|
||||||
|
old_sum = cmos_read(LB_CKS_LOC) << 8;
|
||||||
|
old_sum |= cmos_read(LB_CKS_LOC+1);
|
||||||
|
|
||||||
|
return sum == old_sum;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
static int do_normal_boot(void)
|
||||||
|
{
|
||||||
|
unsigned char byte;
|
||||||
|
|
||||||
|
if (cmos_error() || !cmos_chksum_valid()) {
|
||||||
|
unsigned char byte;
|
||||||
|
/* There are no impossible values, no cheksums so just
|
||||||
|
* trust whatever value we have in the the cmos,
|
||||||
|
* but clear the fallback bit.
|
||||||
|
*/
|
||||||
|
byte = cmos_read(RTC_BOOT_BYTE);
|
||||||
|
byte &= 0x0c;
|
||||||
|
byte |= MAX_REBOOT_CNT << 4;
|
||||||
|
cmos_write(byte, RTC_BOOT_BYTE);
|
||||||
|
}
|
||||||
|
|
||||||
|
/* The RTC_BOOT_BYTE is now o.k. see where to go. */
|
||||||
|
byte = cmos_read(RTC_BOOT_BYTE);
|
||||||
|
|
||||||
|
/* Are we in normal mode? */
|
||||||
|
if (byte & 1) {
|
||||||
|
byte &= 0x0f; /* yes, clear the boot count */
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Are we already at the max count? */
|
||||||
|
if ((byte >> 4) < MAX_REBOOT_CNT) {
|
||||||
|
byte += 1 << 4; /* No, add 1 to the count */
|
||||||
|
}
|
||||||
|
else {
|
||||||
|
byte &= 0xfc; /* Yes, put in fallback mode */
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Is this the first boot? */
|
||||||
|
if ((byte >> 4) <= 1) {
|
||||||
|
byte = (byte & 0xfc) | ((byte & 1) << 1); /* yes, shift the boot bits */
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Save the boot byte */
|
||||||
|
cmos_write(byte, RTC_BOOT_BYTE);
|
||||||
|
|
||||||
|
return ((byte >> 4) < MAX_REBOOT_CNT);
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,108 @@
|
||||||
|
#define SMBUS_IO_BASE 0x1000
|
||||||
|
|
||||||
|
#define SMBGSTATUS 0xe0
|
||||||
|
#define SMBGCTL 0xe2
|
||||||
|
#define SMBHSTADDR 0xe4
|
||||||
|
#define SMBHSTDAT 0xe6
|
||||||
|
#define SMBHSTCMD 0xe8
|
||||||
|
#define SMBHSTFIFO 0xe9
|
||||||
|
|
||||||
|
#define SMBUS_TIMEOUT (100*1000*10)
|
||||||
|
|
||||||
|
static void enable_smbus(void)
|
||||||
|
{
|
||||||
|
uint32_t addr;
|
||||||
|
addr = pci_locate_device(PCI_ID(0x1022, 0x746b), 0);
|
||||||
|
if (addr == ~0U) {
|
||||||
|
die("SMBUS controller not found\r\n");
|
||||||
|
}
|
||||||
|
uint8_t enable;
|
||||||
|
print_debug("SMBus controller enabled\r\n");
|
||||||
|
pci_write_config32(addr + 0x58, SMBUS_IO_BASE | 1);
|
||||||
|
enable = pci_read_config8(addr + 0x41);
|
||||||
|
pci_write_config8(addr + 0x41, enable | (1 << 7));
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
static inline void smbus_delay(void)
|
||||||
|
{
|
||||||
|
outb(0x80, 0x80);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int smbus_wait_until_ready(void)
|
||||||
|
{
|
||||||
|
unsigned long loops;
|
||||||
|
loops = SMBUS_TIMEOUT;
|
||||||
|
do {
|
||||||
|
unsigned short val;
|
||||||
|
smbus_delay();
|
||||||
|
val = inw(SMBUS_IO_BASE + SMBGSTATUS);
|
||||||
|
if ((val & 0x800) == 0) {
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
} while(--loops);
|
||||||
|
return loops?0:-1;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int smbus_wait_until_done(void)
|
||||||
|
{
|
||||||
|
unsigned long loops;
|
||||||
|
loops = SMBUS_TIMEOUT;
|
||||||
|
do {
|
||||||
|
unsigned short val;
|
||||||
|
smbus_delay();
|
||||||
|
|
||||||
|
val = inw(SMBUS_IO_BASE + SMBGSTATUS);
|
||||||
|
if (((val & 0x8) == 0) || ((val & 0x437) != 0)) {
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
} while(--loops);
|
||||||
|
return loops?0:-1;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int smbus_read_byte(unsigned device, unsigned address)
|
||||||
|
{
|
||||||
|
unsigned char global_control_register;
|
||||||
|
unsigned char global_status_register;
|
||||||
|
unsigned char byte;
|
||||||
|
|
||||||
|
if (smbus_wait_until_ready() < 0) {
|
||||||
|
return -1;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* setup transaction */
|
||||||
|
/* disable interrupts */
|
||||||
|
outw(inw(SMBUS_IO_BASE + SMBGCTL) & ~((1<<10)|(1<<9)|(1<<8)|(1<<4)), SMBUS_IO_BASE + SMBGCTL);
|
||||||
|
/* set the device I'm talking too */
|
||||||
|
outw(((device & 0x7f) << 1) | 1, SMBUS_IO_BASE + SMBHSTADDR);
|
||||||
|
/* set the command/address... */
|
||||||
|
outb(address & 0xFF, SMBUS_IO_BASE + SMBHSTCMD);
|
||||||
|
/* set up for a byte data read */
|
||||||
|
outw((inw(SMBUS_IO_BASE + SMBGCTL) & ~7) | (0x2), SMBUS_IO_BASE + SMBGCTL);
|
||||||
|
|
||||||
|
/* clear any lingering errors, so the transaction will run */
|
||||||
|
/* Do I need to write the bits to a 1 to clear an error? */
|
||||||
|
outw(inw(SMBUS_IO_BASE + SMBGSTATUS), SMBUS_IO_BASE + SMBGSTATUS);
|
||||||
|
|
||||||
|
/* clear the data word...*/
|
||||||
|
outw(0, SMBUS_IO_BASE + SMBHSTDAT);
|
||||||
|
|
||||||
|
/* start the command */
|
||||||
|
outw((inw(SMBUS_IO_BASE + SMBGCTL) | (1 << 3)), SMBUS_IO_BASE + SMBGCTL);
|
||||||
|
|
||||||
|
|
||||||
|
/* poll for transaction completion */
|
||||||
|
if (smbus_wait_until_done() < 0) {
|
||||||
|
return -1;
|
||||||
|
}
|
||||||
|
|
||||||
|
global_status_register = inw(SMBUS_IO_BASE + SMBGSTATUS);
|
||||||
|
|
||||||
|
/* read results of transaction */
|
||||||
|
byte = inw(SMBUS_IO_BASE + SMBHSTDAT) & 0xff;
|
||||||
|
|
||||||
|
if (global_status_register != (1 << 4)) {
|
||||||
|
return -1;
|
||||||
|
}
|
||||||
|
return byte;
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,18 @@
|
||||||
|
|
||||||
|
static void amd8111_enable_rom(void)
|
||||||
|
{
|
||||||
|
unsigned char byte;
|
||||||
|
uint32_t addr;
|
||||||
|
|
||||||
|
/* Enable 4MB rom access at 0xFFC00000 - 0xFFFFFFFF */
|
||||||
|
/* Locate the amd8111 */
|
||||||
|
addr = pci_locate_device(PCI_ID(0x1022, 0x7468), 0);
|
||||||
|
|
||||||
|
/* Refine the address to point at the rom enable byte */
|
||||||
|
addr += 0x43;
|
||||||
|
|
||||||
|
/* Set the 4MB enable bit bit */
|
||||||
|
byte = pci_read_config8(addr);
|
||||||
|
byte |= 0x80;
|
||||||
|
pci_write_config8(addr, byte);
|
||||||
|
}
|
||||||
|
|
@ -7,12 +7,16 @@ PACKAGE:=romcc
|
||||||
CC=gcc
|
CC=gcc
|
||||||
CPPFLAGS=-DVERSION='"$(VERSION)"' -DRELEASE_DATE='"$(RELEASE_DATE)"'
|
CPPFLAGS=-DVERSION='"$(VERSION)"' -DRELEASE_DATE='"$(RELEASE_DATE)"'
|
||||||
CFLAGS=-O -g -Wall $(CPPFLAGS)
|
CFLAGS=-O -g -Wall $(CPPFLAGS)
|
||||||
|
CPROF_FLAGS=-pg -fprofile-arcs
|
||||||
|
|
||||||
all: romcc test
|
all: romcc test
|
||||||
|
|
||||||
romcc: romcc.c Makefile
|
romcc: romcc.c Makefile
|
||||||
$(CC) $(CFLAGS) -o $@ $<
|
$(CC) $(CFLAGS) -o $@ $<
|
||||||
|
|
||||||
|
romcc_pg: romcc.c Makefile
|
||||||
|
$(CC) $(CFLAGS) $(CPROF_FLAGS) -o $@ $<
|
||||||
|
|
||||||
TESTS=\
|
TESTS=\
|
||||||
hello_world.c \
|
hello_world.c \
|
||||||
simple_test.c \
|
simple_test.c \
|
||||||
|
|
@ -45,6 +49,7 @@ TESTS=\
|
||||||
simple_test28.c \
|
simple_test28.c \
|
||||||
simple_test29.c \
|
simple_test29.c \
|
||||||
simple_test30.c \
|
simple_test30.c \
|
||||||
|
simple_test31.c \
|
||||||
raminit_test.c \
|
raminit_test.c \
|
||||||
raminit_test2.c \
|
raminit_test2.c \
|
||||||
raminit_test3.c
|
raminit_test3.c
|
||||||
|
|
|
||||||
|
|
@ -17,6 +17,8 @@
|
||||||
#define DEBUG_SCC 0
|
#define DEBUG_SCC 0
|
||||||
#define DEBUG_CONSISTENCY 1
|
#define DEBUG_CONSISTENCY 1
|
||||||
|
|
||||||
|
#warning "FIXME boundary cases with small types in larger registers"
|
||||||
|
|
||||||
/* Control flow graph of a loop without goto.
|
/* Control flow graph of a loop without goto.
|
||||||
*
|
*
|
||||||
* AAA
|
* AAA
|
||||||
|
|
@ -737,6 +739,7 @@ struct hash_entry {
|
||||||
#define HASH_TABLE_SIZE 2048
|
#define HASH_TABLE_SIZE 2048
|
||||||
|
|
||||||
struct compile_state {
|
struct compile_state {
|
||||||
|
const char *label_prefix;
|
||||||
const char *ofilename;
|
const char *ofilename;
|
||||||
FILE *output;
|
FILE *output;
|
||||||
struct triple *vars;
|
struct triple *vars;
|
||||||
|
|
@ -9806,28 +9809,6 @@ static int tdominates(struct compile_state *state,
|
||||||
return result;
|
return result;
|
||||||
}
|
}
|
||||||
|
|
||||||
static int tdistance(struct compile_state *state,
|
|
||||||
struct triple *dom, struct triple *sub)
|
|
||||||
{
|
|
||||||
int count;
|
|
||||||
struct block *bdom, *bsub;
|
|
||||||
if (!tdominates(state, dom, sub)) {
|
|
||||||
internal_error(state, 0, "dom does not dom sub");
|
|
||||||
}
|
|
||||||
bdom = block_of_triple(state, dom);
|
|
||||||
bsub = block_of_triple(state, sub);
|
|
||||||
count = 0;
|
|
||||||
for(; bsub != bdom; (bsub = bsub->idom), sub = bsub->last) {
|
|
||||||
for(; sub != bsub->first; sub = sub->prev) {
|
|
||||||
count++;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
for(; sub != dom; sub = sub->prev) {
|
|
||||||
count++;
|
|
||||||
}
|
|
||||||
return count;
|
|
||||||
}
|
|
||||||
|
|
||||||
static void insert_phi_operations(struct compile_state *state)
|
static void insert_phi_operations(struct compile_state *state)
|
||||||
{
|
{
|
||||||
size_t size;
|
size_t size;
|
||||||
|
|
@ -9864,6 +9845,9 @@ static void insert_phi_operations(struct compile_state *state)
|
||||||
if (!block) {
|
if (!block) {
|
||||||
warning(state, user->member, "dead code");
|
warning(state, user->member, "dead code");
|
||||||
}
|
}
|
||||||
|
if (work[block->vertex] >= iter) {
|
||||||
|
continue;
|
||||||
|
}
|
||||||
work[block->vertex] = iter;
|
work[block->vertex] = iter;
|
||||||
*work_list_tail = block;
|
*work_list_tail = block;
|
||||||
block->work_next = 0;
|
block->work_next = 0;
|
||||||
|
|
@ -9897,7 +9881,7 @@ static void insert_phi_operations(struct compile_state *state)
|
||||||
front->last = front->first->next;
|
front->last = front->first->next;
|
||||||
}
|
}
|
||||||
has_already[front->vertex] = iter;
|
has_already[front->vertex] = iter;
|
||||||
|
|
||||||
/* If necessary plan to visit the basic block */
|
/* If necessary plan to visit the basic block */
|
||||||
if (work[front->vertex] >= iter) {
|
if (work[front->vertex] >= iter) {
|
||||||
continue;
|
continue;
|
||||||
|
|
@ -11972,6 +11956,7 @@ static int coalesce_live_ranges(
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
next:
|
next:
|
||||||
|
;
|
||||||
}
|
}
|
||||||
return coalesced;
|
return coalesced;
|
||||||
}
|
}
|
||||||
|
|
@ -12220,6 +12205,7 @@ static struct triple *least_conflict(struct compile_state *state,
|
||||||
}
|
}
|
||||||
do_triple_set(&conflict->live, set->member, set->new);
|
do_triple_set(&conflict->live, set->member, set->new);
|
||||||
next:
|
next:
|
||||||
|
;
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
return ins;
|
return ins;
|
||||||
|
|
@ -12325,6 +12311,7 @@ static struct triple *split_constrained_range(struct compile_state *state,
|
||||||
constrained_size = size;
|
constrained_size = size;
|
||||||
}
|
}
|
||||||
next:
|
next:
|
||||||
|
;
|
||||||
}
|
}
|
||||||
if (constrained) {
|
if (constrained) {
|
||||||
new = post_copy(state, constrained);
|
new = post_copy(state, constrained);
|
||||||
|
|
@ -14021,6 +14008,10 @@ static void optimize(struct compile_state *state)
|
||||||
/* Transform the code to ssa form */
|
/* Transform the code to ssa form */
|
||||||
transform_to_ssa_form(state);
|
transform_to_ssa_form(state);
|
||||||
verify_consistency(state);
|
verify_consistency(state);
|
||||||
|
if (state->debug & DEBUG_CODE_ELIMINATION) {
|
||||||
|
fprintf(stdout, "After transform_to_ssa_form\n");
|
||||||
|
print_blocks(state, stdout);
|
||||||
|
}
|
||||||
/* Do strength reduction and simple constant optimizations */
|
/* Do strength reduction and simple constant optimizations */
|
||||||
if (state->optimize >= 1) {
|
if (state->optimize >= 1) {
|
||||||
simplify_all(state);
|
simplify_all(state);
|
||||||
|
|
@ -15554,7 +15545,8 @@ static void print_const_val(
|
||||||
(long_t)(ins->u.cval));
|
(long_t)(ins->u.cval));
|
||||||
break;
|
break;
|
||||||
case OP_ADDRCONST:
|
case OP_ADDRCONST:
|
||||||
fprintf(fp, " $L%lu+%lu ",
|
fprintf(fp, " $L%s%lu+%lu ",
|
||||||
|
state->label_prefix,
|
||||||
MISC(ins, 0)->u.cval,
|
MISC(ins, 0)->u.cval,
|
||||||
ins->u.cval);
|
ins->u.cval);
|
||||||
break;
|
break;
|
||||||
|
|
@ -16017,8 +16009,10 @@ static void print_op_branch(struct compile_state *state,
|
||||||
}
|
}
|
||||||
|
|
||||||
}
|
}
|
||||||
fprintf(fp, "\t%s L%lu\n",
|
fprintf(fp, "\t%s L%s%lu\n",
|
||||||
bop, TARG(branch, 0)->u.cval);
|
bop,
|
||||||
|
state->label_prefix,
|
||||||
|
TARG(branch, 0)->u.cval);
|
||||||
}
|
}
|
||||||
|
|
||||||
static void print_op_set(struct compile_state *state,
|
static void print_op_set(struct compile_state *state,
|
||||||
|
|
@ -16128,7 +16122,7 @@ static void print_sdecl(struct compile_state *state,
|
||||||
{
|
{
|
||||||
fprintf(fp, ".section \"" DATA_SECTION "\"\n");
|
fprintf(fp, ".section \"" DATA_SECTION "\"\n");
|
||||||
fprintf(fp, ".balign %d\n", align_of(state, ins->type));
|
fprintf(fp, ".balign %d\n", align_of(state, ins->type));
|
||||||
fprintf(fp, "L%lu:\n", ins->u.cval);
|
fprintf(fp, "L%s%lu:\n", state->label_prefix, ins->u.cval);
|
||||||
print_const(state, MISC(ins, 0), fp);
|
print_const(state, MISC(ins, 0), fp);
|
||||||
fprintf(fp, ".section \"" TEXT_SECTION "\"\n");
|
fprintf(fp, ".section \"" TEXT_SECTION "\"\n");
|
||||||
|
|
||||||
|
|
@ -16219,7 +16213,7 @@ static void print_instruction(struct compile_state *state,
|
||||||
if (!ins->use) {
|
if (!ins->use) {
|
||||||
return;
|
return;
|
||||||
}
|
}
|
||||||
fprintf(fp, "L%lu:\n", ins->u.cval);
|
fprintf(fp, "L%s%lu:\n", state->label_prefix, ins->u.cval);
|
||||||
break;
|
break;
|
||||||
/* Ignore OP_PIECE */
|
/* Ignore OP_PIECE */
|
||||||
case OP_PIECE:
|
case OP_PIECE:
|
||||||
|
|
@ -16299,7 +16293,7 @@ static void print_tokens(struct compile_state *state)
|
||||||
}
|
}
|
||||||
|
|
||||||
static void compile(const char *filename, const char *ofilename,
|
static void compile(const char *filename, const char *ofilename,
|
||||||
int cpu, int debug, int opt)
|
int cpu, int debug, int opt, const char *label_prefix)
|
||||||
{
|
{
|
||||||
int i;
|
int i;
|
||||||
struct compile_state state;
|
struct compile_state state;
|
||||||
|
|
@ -16320,6 +16314,8 @@ static void compile(const char *filename, const char *ofilename,
|
||||||
error(&state, 0, "Cannot open output file %s\n",
|
error(&state, 0, "Cannot open output file %s\n",
|
||||||
ofilename);
|
ofilename);
|
||||||
}
|
}
|
||||||
|
/* Remember the label prefix */
|
||||||
|
state.label_prefix = label_prefix;
|
||||||
/* Prep the preprocessor */
|
/* Prep the preprocessor */
|
||||||
state.if_depth = 0;
|
state.if_depth = 0;
|
||||||
state.if_value = 0;
|
state.if_value = 0;
|
||||||
|
|
@ -16380,11 +16376,13 @@ int main(int argc, char **argv)
|
||||||
{
|
{
|
||||||
const char *filename;
|
const char *filename;
|
||||||
const char *ofilename;
|
const char *ofilename;
|
||||||
|
const char *label_prefix;
|
||||||
int cpu;
|
int cpu;
|
||||||
int last_argc;
|
int last_argc;
|
||||||
int debug;
|
int debug;
|
||||||
int optimize;
|
int optimize;
|
||||||
cpu = CPU_DEFAULT;
|
cpu = CPU_DEFAULT;
|
||||||
|
label_prefix = "";
|
||||||
ofilename = "auto.inc";
|
ofilename = "auto.inc";
|
||||||
optimize = 0;
|
optimize = 0;
|
||||||
debug = 0;
|
debug = 0;
|
||||||
|
|
@ -16396,6 +16394,11 @@ int main(int argc, char **argv)
|
||||||
argv++;
|
argv++;
|
||||||
argc--;
|
argc--;
|
||||||
}
|
}
|
||||||
|
else if (strncmp(argv[1], "--label-prefix=", 15) == 0) {
|
||||||
|
label_prefix= argv[1] + 15;
|
||||||
|
argv++;
|
||||||
|
argc--;
|
||||||
|
}
|
||||||
else if ((strcmp(argv[1],"-O") == 0) ||
|
else if ((strcmp(argv[1],"-O") == 0) ||
|
||||||
(strcmp(argv[1], "-O1") == 0)) {
|
(strcmp(argv[1], "-O1") == 0)) {
|
||||||
optimize = 1;
|
optimize = 1;
|
||||||
|
|
@ -16426,7 +16429,7 @@ int main(int argc, char **argv)
|
||||||
arg_error("Wrong argument count %d\n", argc);
|
arg_error("Wrong argument count %d\n", argc);
|
||||||
}
|
}
|
||||||
filename = argv[1];
|
filename = argv[1];
|
||||||
compile(filename, ofilename, cpu, debug, optimize);
|
compile(filename, ofilename, cpu, debug, optimize, label_prefix);
|
||||||
|
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,16 @@
|
||||||
|
|
||||||
|
static unsigned pci_locate_device(unsigned addr)
|
||||||
|
{
|
||||||
|
addr &= ~0xff;
|
||||||
|
for(; addr <= 0x00ffff00; addr += 0x00000100) {
|
||||||
|
__builtin_outl(addr, 0x12);
|
||||||
|
}
|
||||||
|
return addr;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void main(void)
|
||||||
|
{
|
||||||
|
unsigned long addr;
|
||||||
|
addr = pci_locate_device(0);
|
||||||
|
__builtin_outl(addr, 0x12);
|
||||||
|
}
|
||||||
Loading…
Reference in New Issue