Option ROM init x86/x86emu update

- use default display in int 15 5f35
- move REALMODE_BASE to 0x600, 0x500 can be BDA
- add regparm for assembler functions
- use memset instead of own implementation
- YABEL: copy back the IVT, BDA and VBIOS. Some Xorg drivers require this.
- YABEL: use hardware timer instead of emulated timer, because the emulated
  timer's base is never initialized (leading to division by zero if the 
  timer is really used)

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4852 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Stefan Reinauer 2009-10-25 19:50:47 +00:00 committed by Stefan Reinauer
parent 46a895e633
commit 074356ec81
5 changed files with 17 additions and 10 deletions

View File

@ -29,7 +29,7 @@
#include <console.h>
#endif
#define REALMODE_BASE ((void *)0x500)
#define REALMODE_BASE ((void *)0x600)
struct realmode_idt {
u16 offset, cs;
@ -41,8 +41,8 @@ extern unsigned char __idt_handler, __idt_handler_size;
extern unsigned char __realmode_code, __realmode_code_size;
extern unsigned char __run_optionrom, __run_interrupt;
void (*run_optionrom)(u32 devfn) = (void *)&__run_optionrom;
void (*vga_enable_console)(void) = (void *)&__run_interrupt;
void (*run_optionrom)(u32 devfn) __attribute__((regparm(0))) = (void *)&__run_optionrom;
void (*vga_enable_console)(void) __attribute__((regparm(0))) = (void *)&__run_interrupt;
int (*intXX_handler[256])(struct eregs *regs) = { NULL };
@ -127,9 +127,7 @@ void run_bios(struct device *dev, unsigned long addr)
int i;
/* clear vga bios data area */
for (i = 0x400; i < 0x500; i++) {
*(unsigned char *) i = 0;
}
memset(0x400, 0, 0x200);
/* Set up C interrupt handlers */
setup_interrupt_handlers();

View File

@ -17,7 +17,7 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
*/
#define REALMODE_BASE 0x500
#define REALMODE_BASE 0x600
#define RELOCATED(x) (x - __realmode_code + REALMODE_BASE)
/* CR0 bits */

View File

@ -206,6 +206,7 @@ int int15_handler(struct eregs *regs)
regs->eax = 0x860f;
break;
/* And now Intel IGD code */
#define BOOT_DISPLAY_DEFAULT 0
#define BOOT_DISPLAY_CRT (1 << 0)
#define BOOT_DISPLAY_TV (1 << 1)
#define BOOT_DISPLAY_EFP (1 << 2)
@ -217,7 +218,7 @@ int int15_handler(struct eregs *regs)
case 0x5f35:
regs->eax = 0x5f;
regs->ecx = BOOT_DISPLAY_LCD|BOOT_DISPLAY_CRT;
regs->ecx = BOOT_DISPLAY_DEFAULT;
res = 0;
break;
case 0x5f40:

View File

@ -17,6 +17,7 @@
#ifndef CONFIG_COREBOOT_V2
#include <config.h>
#endif
#include <string.h>
#include <device/device.h>
#define VMEM_SIZE 1024 *1024 /* 1 MB */
@ -33,6 +34,9 @@ u32 biosemu(u8 *biosmem, u32 biosmem_size, struct device *dev,
void run_bios(struct device * dev, unsigned long addr)
{
biosemu(vmem, VMEM_SIZE, dev, addr);
memcpy(0x0, vmem + 0x0, 0x400);
memcpy(0x400, vmem + 0x400, 0x100);
memcpy(0xc0000, vmem + 0xc0000, 0x10000);
}
u64 get_time(void)

View File

@ -36,6 +36,9 @@ extern int write_io(void *, unsigned int, size_t);
//defined in net-snk/kernel/timer.c
extern u64 get_time(void);
#ifdef COREBOOT_V2
#include <arch/io.h>
#else
// these are not used, only needed for linking, must be overridden using X86emu_setupPioFuncs
// with the functions and struct below
void
@ -82,7 +85,7 @@ inl(u16 port)
HALT_SYS();
return 0;
}
#endif
u32 pci_cfg_read(X86EMU_pioAddr addr, u8 size);
void pci_cfg_write(X86EMU_pioAddr addr, u32 val, u8 size);
u8 handle_port_61h(void);
@ -106,7 +109,8 @@ my_inb(X86EMU_pioAddr addr)
switch (addr) {
case 0x61:
//8254 KB Controller / Timer Port
rval = handle_port_61h();
// rval = handle_port_61h();
rval = inb(0x61);
//DEBUG_PRINTF_IO("%s(%04x) KB / Timer Port B --> %02x\n", __func__, addr, rval);
return rval;
break;