From 0766d2c2289e3509e22412923a8eb40b02ef4745 Mon Sep 17 00:00:00 2001 From: Renze Nicolai Date: Mon, 18 Dec 2017 20:28:47 +0100 Subject: [PATCH] superio/f71869ad: Add temperature sensor type This patch makes it possible to set the "Temperature Sensor Type Register" at index 6Bh from the devicetree, allowing the use of thermistors instead of BJT type sensors. Register documentation (from page 60 of the F71869 datasheet): 6.6.25 Temperature Sensor Type Register - Index 6Bh Bit 7-4: reserved Bit 3: T3_MODE (0: thermistor, 1: BJT [default]) Bit 2: T2_MODE (0: thermistor, 1: BJT [default]) Bit 1: T1_MODE (0: thermistor, 1: BJT [default]) Bit 0: reserved Change-Id: I6af0d93061ec49aec7a9181cdf7affd60fbdca73 Signed-off-by: Renze Nicolai Reviewed-on: https://review.coreboot.org/22935 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel Reviewed-by: Felix Held --- src/superio/fintek/f71869ad/chip.h | 1 + src/superio/fintek/f71869ad/f71869ad_hwm.c | 3 +++ 2 files changed, 4 insertions(+) diff --git a/src/superio/fintek/f71869ad/chip.h b/src/superio/fintek/f71869ad/chip.h index 4e4323edd7..42d451dbee 100644 --- a/src/superio/fintek/f71869ad/chip.h +++ b/src/superio/fintek/f71869ad/chip.h @@ -37,6 +37,7 @@ struct superio_fintek_f71869ad_config { uint8_t hwm_fan1_seg2_speed_count; uint8_t hwm_fan1_seg3_speed_count; uint8_t hwm_fan1_temp_map_sel; + uint8_t hwm_temp_sensor_type; }; #endif /* SUPERIO_FINTEK_F71869AD_CHIP_H */ diff --git a/src/superio/fintek/f71869ad/f71869ad_hwm.c b/src/superio/fintek/f71869ad/f71869ad_hwm.c index d253e5f6e6..b0b1a6b254 100644 --- a/src/superio/fintek/f71869ad/f71869ad_hwm.c +++ b/src/superio/fintek/f71869ad/f71869ad_hwm.c @@ -50,6 +50,7 @@ #define HWM_FAN1_SEG2_SPEED_COUNT 0xAB #define HWM_FAN1_SEG3_SPEED_COUNT 0xAC #define HWM_FAN1_TEMP_MAP_SEL 0xAF +#define HWM_TEMP_SENSOR_TYPE 0x6B /* note: multifunc registers need to be tweaked before here */ void f71869ad_hwm_init(struct device *dev) @@ -97,6 +98,8 @@ void f71869ad_hwm_init(struct device *dev) pnp_write_index(port, HWM_FAN1_SEG1_SPEED_COUNT, conf->hwm_fan1_seg1_speed_count); pnp_write_index(port, HWM_FAN1_SEG2_SPEED_COUNT, conf->hwm_fan1_seg2_speed_count); pnp_write_index(port, HWM_FAN1_SEG3_SPEED_COUNT, conf->hwm_fan1_seg3_speed_count); + /* Temperature sensor type */ + pnp_write_index(port, HWM_TEMP_SENSOR_TYPE, conf->hwm_temp_sensor_type); pnp_exit_conf_mode(dev); }