rush: use padconfig API in bootblock

Switch over to the padconfig API for bootblock PAD configurations.
Aside from support code, each entry is 4 bytes. The open coded
calls were 12 bytes each.

BUG=chrome-os-partner:29981
BRANCH=None
TEST=Built and ran on rush. Observed consistent results.

Change-Id: Ibfa6fc188a7c503cfad41420ed50c7a88fdec579
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2245478f8e21167e93a6e97b12730788a7f927ae
Original-Change-Id: I1d5d38322bda6740a0ea50b89f88b722febdee22
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210836
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8878
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This commit is contained in:
Aaron Durbin 2014-08-01 15:43:36 -05:00 committed by Patrick Georgi
parent 6ecf3f6601
commit 083b21b354
1 changed files with 18 additions and 28 deletions

View File

@ -26,8 +26,6 @@
#include <soc/padconfig.h> #include <soc/padconfig.h>
#include <soc/nvidia/tegra/i2c.h> #include <soc/nvidia/tegra/i2c.h>
#include <soc/nvidia/tegra132/clk_rst.h> #include <soc/nvidia/tegra132/clk_rst.h>
#include <soc/nvidia/tegra132/gpio.h>
#include <soc/nvidia/tegra132/pinmux.h>
#include <soc/nvidia/tegra132/spi.h> /* FIXME: move back to soc code? */ #include <soc/nvidia/tegra132/spi.h> /* FIXME: move back to soc code? */
#include "pmic.h" #include "pmic.h"
@ -47,6 +45,22 @@ static const struct pad_config uart_console_pads[] = {
PAD_CFG_UNUSED(UART2_CTS_N), PAD_CFG_UNUSED(UART2_CTS_N),
}; };
static const struct pad_config padcfgs[] = {
/* Board ID bits 3:0 */
PAD_CFG_GPIO_INPUT(GPIO_X4_AUD, PINMUX_PULL_NONE),
PAD_CFG_GPIO_INPUT(GPIO_X1_AUD, PINMUX_PULL_NONE),
PAD_CFG_GPIO_INPUT(KB_ROW17, PINMUX_PULL_NONE),
PAD_CFG_GPIO_INPUT(KB_COL3, PINMUX_PULL_NONE),
/* PMIC i2C bus */
PAD_CFG_SFIO(PWR_I2C_SCL, PINMUX_INPUT_ENABLE, I2CPMU),
PAD_CFG_SFIO(PWR_I2C_SDA, PINMUX_INPUT_ENABLE, I2CPMU),
/* SPI fLash: mosi, miso, clk, cs0 */
PAD_CFG_SFIO(GPIO_PG6, PINMUX_INPUT_ENABLE | PINMUX_PULL_UP, SPI4),
PAD_CFG_SFIO(GPIO_PG7, PINMUX_INPUT_ENABLE | PINMUX_PULL_UP, SPI4),
PAD_CFG_SFIO(GPIO_PG5, PINMUX_INPUT_ENABLE, SPI4),
PAD_CFG_SFIO(GPIO_PI3, PINMUX_INPUT_ENABLE, SPI4),
};
void bootblock_mainboard_early_init(void) void bootblock_mainboard_early_init(void)
{ {
soc_configure_pads(uart_console_pads, ARRAY_SIZE(uart_console_pads)); soc_configure_pads(uart_console_pads, ARRAY_SIZE(uart_console_pads));
@ -75,35 +89,11 @@ void bootblock_mainboard_init(void)
CLK_H_I2C5 | CLK_H_APBDMA, CLK_H_I2C5 | CLK_H_APBDMA,
0, CLK_V_MSELECT, 0, 0); 0, CLK_V_MSELECT, 0, 0);
// Board ID GPIOs, bits 0-3. /* Set up the pads required to load romstage. */
gpio_input(GPIO(Q3)); soc_configure_pads(padcfgs, ARRAY_SIZE(padcfgs));
gpio_input(GPIO(T1));
gpio_input(GPIO(X1));
gpio_input(GPIO(X4));
// I2C5 (PMU) clock.
pinmux_set_config(PINMUX_PWR_I2C_SCL_INDEX,
PINMUX_PWR_I2C_SCL_FUNC_I2CPMU | PINMUX_INPUT_ENABLE);
// I2C5 (PMU) data.
pinmux_set_config(PINMUX_PWR_I2C_SDA_INDEX,
PINMUX_PWR_I2C_SDA_FUNC_I2CPMU | PINMUX_INPUT_ENABLE);
i2c_init(4); i2c_init(4);
pmic_init(4); pmic_init(4);
/* SPI4 data out (MOSI) */
pinmux_set_config(PINMUX_GPIO_PG6_INDEX,
PINMUX_GPIO_PG6_FUNC_SPI4 | PINMUX_INPUT_ENABLE |
PINMUX_PULL_UP);
/* SPI4 data in (MISO) */
pinmux_set_config(PINMUX_GPIO_PG7_INDEX,
PINMUX_GPIO_PG7_FUNC_SPI4 | PINMUX_INPUT_ENABLE |
PINMUX_PULL_UP);
/* SPI4 clock */
pinmux_set_config(PINMUX_GPIO_PG5_INDEX,
PINMUX_GPIO_PG5_FUNC_SPI4 | PINMUX_INPUT_ENABLE);
/* SPI4 chip select 0 */
pinmux_set_config(PINMUX_GPIO_PI3_INDEX,
PINMUX_GPIO_PI3_FUNC_SPI4 | PINMUX_INPUT_ENABLE);
tegra_spi_init(4); tegra_spi_init(4);
} }