soc/intel/elkhartlake: Update FSP-S UPD LPSS related configs

Add Silicon upd settings for LPSS (GSPI/UART/I2C).

Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
Change-Id: Ib0c3cd1d37ff9892d09d6d86ac50e230549c7e53
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54959
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>

src/mainboard/intel/elkhartlake_crb/variants/ehlcrb/devicetree.cb

@@ -43,13 +43,71 @@ chip soc/intel/elkhartlake
 	register "PcieClkSrcClkReq[4]" = "0x4"
 	register "PcieClkSrcClkReq[5]" = "0x5"
 
+	register "SerialIoI2cMode" = "{
+		[PchSerialIoIndexI2C0] = PchSerialIoPci,
+		[PchSerialIoIndexI2C1] = PchSerialIoDisabled,
+		[PchSerialIoIndexI2C2] = PchSerialIoPci,
+		[PchSerialIoIndexI2C3] = PchSerialIoPci,
+		[PchSerialIoIndexI2C4] = PchSerialIoPci,
+		[PchSerialIoIndexI2C5] = PchSerialIoDisabled,
+		[PchSerialIoIndexI2C6] = PchSerialIoPci,
+		[PchSerialIoIndexI2C7] = PchSerialIoPci,
+	}"
+
+	register "SerialIoI2cPadsTermination" = "{
+		[PchSerialIoIndexI2C0] = 1,
+		[PchSerialIoIndexI2C1] = 1,
+		[PchSerialIoIndexI2C2] = 1,
+		[PchSerialIoIndexI2C3] = 1,
+		[PchSerialIoIndexI2C4] = 1,
+		[PchSerialIoIndexI2C5] = 1,
+		[PchSerialIoIndexI2C6] = 1,
+		[PchSerialIoIndexI2C7] = 1,
+	}"
+
+	register "SerialIoGSpiMode" = "{
+		[PchSerialIoIndexGSPI0] = PchSerialIoDisabled,
+		[PchSerialIoIndexGSPI1] = PchSerialIoHidden,
+		[PchSerialIoIndexGSPI2] = PchSerialIoDisabled,
+	}"
+
+	register "SerialIoGSpiCsEnable" = "{
+		[PchSerialIoIndexGSPI0] = 1,
+		[PchSerialIoIndexGSPI1] = 1,
+		[PchSerialIoIndexGSPI2] = 1,
+	}"
+
+	register "SerialIoGSpiCsMode" = "{
+		[PchSerialIoIndexGSPI0] = 0,
+		[PchSerialIoIndexGSPI1] = 0,
+		[PchSerialIoIndexGSPI2] = 0,
+	}"
+
+	register "SerialIoGSpiCsState" = "{
+		[PchSerialIoIndexGSPI0] = 0,
+		[PchSerialIoIndexGSPI1] = 0,
+		[PchSerialIoIndexGSPI2] = 0,
+	}"
+
+	register "SerialIoUartMode" = "{
+		[PchSerialIoIndexUART0] = PchSerialIoDisabled,
+		[PchSerialIoIndexUART1] = PchSerialIoDisabled,
+		[PchSerialIoIndexUART2] = PchSerialIoSkipInit,
+	}"
+
+	register "SerialIoUartDmaEnable" = "{
+		[PchSerialIoIndexUART0] = 1,
+		[PchSerialIoIndexUART1] = 1,
+		[PchSerialIoIndexUART2] = 1,
+	}"
+
 	# GPIO for SD card detect
 	register "sdcard_cd_gpio" = "GPP_G5"
 
 	device domain 0 on
-		device pci 00.0 on  end # Host Bridge
+		device pci 00.0 on	end # Host Bridge
-		device pci 02.0 on  end # Integrated Graphics Device
+		device pci 02.0 on	end # Integrated Graphics Device
-		device pci 04.0 off end # SA Thermal device
+		device pci 04.0 off	end # SA Thermal device
 		device pci 08.0 off	end # GNA
 		device pci 09.0 off	end # CPU Intel Trace Hub
 

src/soc/intel/elkhartlake/chip.h

@@ -166,6 +166,14 @@ struct soc_intel_elkhartlake_config {
 	uint8_t SerialIoI2cMode[CONFIG_SOC_INTEL_I2C_DEV_MAX];
 	uint8_t SerialIoGSpiMode[CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_MAX];
 	uint8_t SerialIoUartMode[CONFIG_SOC_INTEL_UART_DEV_MAX];
+	/*
+	 * UARTn Default DMA/PIO Mode Enable(1)/Disable(0):
+	 */
+	uint8_t SerialIoUartDmaEnable[CONFIG_SOC_INTEL_UART_DEV_MAX];
+	/*
+	 * GSPIn Default Chip Enable(1)/Disable(0):
+	 */
+	uint8_t SerialIoGSpiCsEnable[CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_MAX];
 	/*
 	 * GSPIn Default Chip Select Mode:
 	 * 0:Hardware Mode,
@@ -178,6 +186,15 @@ struct soc_intel_elkhartlake_config {
 	 * 1: High
 	 */
 	uint8_t SerialIoGSpiCsState[CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_MAX];
+/*
+	 * SerialIo I2C Pads Termination Config:
+	 * 0x0:Hardware default,
+	 * 0x1:None,
+	 * 0x13:1kOhm weak pull-up,
+	 * 0x15:5kOhm weak pull-up,
+	 * 0x19:20kOhm weak pull-up
+	 */
+	uint8_t SerialIoI2cPadsTermination[CONFIG_SOC_INTEL_I2C_DEV_MAX];
 
 	/*
 	 * TraceHubMode config

src/soc/intel/elkhartlake/fsp_params.c

@@ -13,6 +13,7 @@
 #include <soc/pci_devs.h>
 #include <soc/ramstage.h>
 #include <soc/soc_chip.h>
+#include <string.h>
 
 /*
  * ME End of Post configuration
@@ -45,7 +46,66 @@ static const pci_devfn_t serial_io_dev[] = {
 
 static void parse_devicetree(FSP_S_CONFIG *params)
 {
-	/* TODO: Update with UPD override as FSP matures */
+	const struct soc_intel_elkhartlake_config *config = config_of_soc();
+
+	/* LPSS controllers configuration */
+
+	/* I2C */
+	_Static_assert(ARRAY_SIZE(params->SerialIoI2cMode) >=
+			ARRAY_SIZE(config->SerialIoI2cMode), "copy buffer overflow!");
+	memcpy(params->SerialIoI2cMode, config->SerialIoI2cMode,
+		sizeof(config->SerialIoI2cMode));
+
+	_Static_assert(ARRAY_SIZE(params->PchSerialIoI2cPadsTermination) >=
+			ARRAY_SIZE(config->SerialIoI2cPadsTermination),
+			"copy buffer overflow!");
+	memcpy(params->PchSerialIoI2cPadsTermination, config->SerialIoI2cPadsTermination,
+		sizeof(config->SerialIoI2cPadsTermination));
+
+	params->PchSerialIoI2cSclPinMux[4] = 0x1B44AC09;	//GPIO native mode for GPP_H9
+	params->PchSerialIoI2cSdaPinMux[4] = 0x1B44CC08;	//GPIO native mode for GPP_H8
+
+	/* GSPI */
+	_Static_assert(ARRAY_SIZE(params->SerialIoSpiMode) >=
+			ARRAY_SIZE(config->SerialIoGSpiMode), "copy buffer overflow!");
+	memcpy(params->SerialIoSpiMode, config->SerialIoGSpiMode,
+		sizeof(config->SerialIoGSpiMode));
+
+	_Static_assert(ARRAY_SIZE(params->SerialIoSpiCsEnable) >=
+			ARRAY_SIZE(config->SerialIoGSpiCsEnable), "copy buffer overflow!");
+	memcpy(params->SerialIoSpiCsEnable, config->SerialIoGSpiCsEnable,
+		sizeof(config->SerialIoGSpiCsEnable));
+
+	_Static_assert(ARRAY_SIZE(params->SerialIoSpiCsMode) >=
+			ARRAY_SIZE(config->SerialIoGSpiCsMode), "copy buffer overflow!");
+	memcpy(params->SerialIoSpiCsMode, config->SerialIoGSpiCsMode,
+		sizeof(config->SerialIoGSpiCsMode));
+
+	_Static_assert(ARRAY_SIZE(params->SerialIoSpiCsState) >=
+			ARRAY_SIZE(config->SerialIoGSpiCsState), "copy buffer overflow!");
+	memcpy(params->SerialIoSpiCsState, config->SerialIoGSpiCsState,
+		sizeof(config->SerialIoGSpiCsState));
+
+	params->SerialIoSpiCsPolarity[2] = 0;
+
+	/* UART */
+	_Static_assert(ARRAY_SIZE(params->SerialIoUartMode) >=
+			ARRAY_SIZE(config->SerialIoUartMode), "copy buffer overflow!");
+	memcpy(params->SerialIoUartMode, config->SerialIoUartMode,
+		sizeof(config->SerialIoUartMode));
+
+	_Static_assert(ARRAY_SIZE(params->SerialIoUartDmaEnable) >=
+			ARRAY_SIZE(config->SerialIoUartDmaEnable), "copy buffer overflow!");
+	memcpy(params->SerialIoUartDmaEnable, config->SerialIoUartDmaEnable,
+		sizeof(config->SerialIoUartDmaEnable));
+
+	params->SerialIoUartCtsPinMuxPolicy[0] = 0x2B01320F;	//GPIO native mode for GPP_T15
+	params->SerialIoUartRtsPinMuxPolicy[0] = 0x2B01220E;	//GPIO native mode for GPP_T14
+	params->SerialIoUartRxPinMuxPolicy[0] = 0x2B01020C;	//GPIO native mode for GPP_T12
+	params->SerialIoUartTxPinMuxPolicy[0] = 0x2B01120D;	//GPIO native mode for GPP_T13
+
+	/* Provide correct UART number for FSP debug logs */
+	params->SerialIoDebugUartNumber = CONFIG_UART_FOR_CONSOLE;
 }
 
 /* UPD parameters to be initialized before SiliconInit */