diff --git a/src/mainboard/hp/pavilion_m6_1035dx/buildOpts.c b/src/mainboard/hp/pavilion_m6_1035dx/buildOpts.c index 3a80e0121b..2b47baa65e 100644 --- a/src/mainboard/hp/pavilion_m6_1035dx/buildOpts.c +++ b/src/mainboard/hp/pavilion_m6_1035dx/buildOpts.c @@ -368,72 +368,14 @@ GPIO_CONTROL parmer_gpio[] = { */ /* - * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA - * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable - * is populated, AGESA will base its settings on the data from the table. Otherwise, it will - * use its default conservative settings. + * Platform Specific Overriding Table allows IBV/OEM to pass in platform + * information to AGESA + * (e.g. MemClk routing, the number of DIMM slots per channel,...). + * If PlatformSpecificTable is populated, AGESA will base its settings on the + * data from the table. Otherwise, it will use its default conservative settings */ CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { - // - // The following macros are supported (use comma to separate macros): - // - // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) - // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. - // AGESA will base on this value to disable unused MemClk to save power. - // Example: - // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: - // Bit AM3/S1g3 pin name - // 0 M[B,A]_CLK_H/L[0] - // 1 M[B,A]_CLK_H/L[1] - // 2 M[B,A]_CLK_H/L[2] - // 3 M[B,A]_CLK_H/L[3] - // 4 M[B,A]_CLK_H/L[4] - // 5 M[B,A]_CLK_H/L[5] - // 6 M[B,A]_CLK_H/L[6] - // 7 M[B,A]_CLK_H/L[7] - // And platform has the following routing: - // CS0 M[B,A]_CLK_H/L[4] - // CS1 M[B,A]_CLK_H/L[2] - // CS2 M[B,A]_CLK_H/L[3] - // CS3 M[B,A]_CLK_H/L[5] - // Then platform can specify the following macro: - // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) - // - // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) - // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. - // AGESA will base on this value to tristate unused CKE to save power. - // - // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) - // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. - // AGESA will base on this value to tristate unused ODT pins to save power. - // - // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) - // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. - // AGESA will base on this value to tristate unused Chip select to save power. - // - // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) - // Specifies the number of DIMM slots per channel. - // - // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) - // Specifies the number of Chip selects per channel. - // - // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) - // Specifies the number of channels per socket. - // - // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) - // Specifies DDR bus speed of channel ChannelID on socket SocketID. - // - // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) - // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) - // - // WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Specifies the write leveling seed for a channel of a socket. - // - // HW_RXEN_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Speicifes the HW RXEN training seed for a channel of a socket - // + NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 1), NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 2), MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), @@ -447,44 +389,6 @@ CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { // Customer table UINT8 AGESA_MEM_TABLE_TN[][sizeof (MEM_TABLE_ALIAS)] = { - // Hardcoded Memory Training Values - - // The following macro should be used to override training values for your platform - // - // DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20), - // - // NOTE: - // The following training hardcode values are example values that were taken from a tilapia motherboard - // with a particular DIMM configuration. To hardcode your own values, uncomment the appropriate line in - // the table and replace the byte lane values with your own. - // - // ------------------ BYTE LANES ---------------------- - // BL0 BL1 BL2 BL3 BL4 BL5 BL6 Bl7 ECC - // Write Data Timing - // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0 - // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1 - // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0 - // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1 - - // DQS Receiver Enable - // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 - // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1 - // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0 - // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1 - - // Write DQS Delays - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1 - - // Read DQS Delays - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1 - //-------------------------------------------------------------------------------------------------------------------------------------------------- - // TABLE END NBACCESS (MTEnd, 0, 0, 0, 0, 0), // End of Table }; UINT8 SizeOfTableTN = sizeof (AGESA_MEM_TABLE_TN) / sizeof (AGESA_MEM_TABLE_TN[0]);