mb/google/volteer/variant/lindar: Update devicetree settings

Update I2C address for Goodix touchscreen and add ELAN touchscreen &
Synaptics trackpad device. Follow CB:47415 to correct HID over I2C
device to be level triggerd.

BUG=b:160013582
TEST=emerge-volteer coreboot and check system dmesg and evtest can get
device.

Change-Id: I070fb0e06b588f128253270502c9c2c427c62b84
Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47390
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This commit is contained in:
Stanley Wu 2020-11-05 21:10:39 +08:00 committed by Tim Wawrzynczak
parent 50a1072180
commit 0c3845d2ee
1 changed files with 22 additions and 1 deletions

View File

@ -58,7 +58,19 @@ chip soc/intel/tigerlake
register "generic.stop_off_delay_ms" = "1" register "generic.stop_off_delay_ms" = "1"
register "generic.has_power_resource" = "1" register "generic.has_power_resource" = "1"
register "hid_desc_reg_offset" = "0x01" register "hid_desc_reg_offset" = "0x01"
device i2c 14 on end device i2c 5d on end
end
chip drivers/i2c/generic
register "hid" = ""ELAN0001""
register "desc" = ""ELAN Touchscreen""
register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
register "probed" = "1"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)"
register "reset_delay_ms" = "20"
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)"
register "enable_delay_ms" = "1"
register "has_power_resource" = "1"
device i2c 10 on end
end end
end end
device ref i2c5 on device ref i2c5 on
@ -70,6 +82,15 @@ chip soc/intel/tigerlake
register "probed" = "1" register "probed" = "1"
device i2c 15 on end device i2c 15 on end
end end
chip drivers/i2c/hid
register "generic.hid" = ""PNP0C50""
register "generic.desc" = ""Synaptics Touchpad""
register "generic.irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E15_IRQ)"
register "generic.wake" = "GPE0_DW2_15"
register "generic.probed" = "1"
register "hid_desc_reg_offset" = "0x20"
device i2c 0x2c on end
end
end end
device ref north_xhci on device ref north_xhci on
chip drivers/usb/acpi chip drivers/usb/acpi