GNUBoot/coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

mb/google/glados: convert to overridetree

Browse source 
Simplify glados variants by converting to overridetree format.

Change-Id: I6dd7a4b1ae7f1d3ce9fadb06ea95e021a1c880a5
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39983
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
Matt DeVillier 2020-03-31 13:12:22 -05:00
parent e7dc4f40ef
commit 0d58e64ddf
15 changed files with 562 additions and 1475 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

4
src/mainboard/google/glados/Kconfig
View file

@ -60,9 +60,9 @@ config VARIANT_DIR
default "lars" if BOARD_GOOGLE_LARS
default "sentry" if BOARD_GOOGLE_SENTRY
config DEVICETREE
config OVERRIDE_DEVICETREE
string
default "variants/$(CONFIG_VARIANT_DIR)/devicetree.cb"
default "variants/$(CONFIG_VARIANT_DIR)/overridetree.cb"
config MAX_CPUS
int

67
src/mainboard/google/glados/variants/lars/devicetree.cb → src/mainboard/google/glados/devicetree.cb
View file

@ -77,18 +77,6 @@ chip soc/intel/skylake
# RP 1 uses SRCCLKREQ1#
register "PcieRpClkReqNumber[0]" = "1"
register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC0)" # Type-C Port 1
register "usb2_ports[1]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera
register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
register "usb2_ports[4]" = "USB2_PORT_MID(OC2)" # Type-A Port (card)
register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # SD
register "usb2_ports[8]" = "USB2_PORT_LONG(OC3)" # Type-A Port (board)
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # SD
register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port (card)
register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port (board)
# Must leave UART0 enabled or SD/eMMC will not work as PCI
register "SerialIoDevMode" = "{
[PchSerialIoIndexI2C0] = PchSerialIoPci,
@ -127,23 +115,8 @@ chip soc/intel/skylake
device pci 14.0 on end # USB xHCI
device pci 14.1 off end # USB xDCI (OTG)
device pci 14.2 on end # Thermal Subsystem
device pci 15.0 on
chip drivers/i2c/generic
register "hid" = ""ELAN0001""
register "desc" = ""ELAN Touchscreen""
register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
device i2c 10 on end
end
end # I2C #0
device pci 15.1 on
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
register "desc" = ""ELAN Touchpad""
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)"
register "wake" = "GPE0_DW0_05"
device i2c 15 on end
end
end # I2C #1
device pci 15.0 on end # I2C #0
device pci 15.1 on end # I2C #1
device pci 15.2 off end # I2C #2
device pci 15.3 off end # I2C #3
device pci 16.0 on end # Management Engine Interface 1
@ -154,30 +127,7 @@ chip soc/intel/skylake
device pci 17.0 off end # SATA
device pci 19.0 on end # UART #2
device pci 19.1 off end # I2C #5
device pci 19.2 on
chip drivers/i2c/nau8825
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)"
register "jkdet_enable" = "1"
register "jkdet_pull_enable" = "1"
register "jkdet_pull_up" = "1"
register "jkdet_polarity" = "1" # ActiveLow
register "vref_impedance" = "2" # 125kOhm
register "micbias_voltage" = "6" # 2.754
register "sar_threshold_num" = "4"
register "sar_threshold[0]" = "0x08"
register "sar_threshold[1]" = "0x12"
register "sar_threshold[2]" = "0x26"
register "sar_threshold[3]" = "0x73"
register "sar_hysteresis" = "0"
register "sar_voltage" = "6"
register "sar_compare_time" = "1" # 1us
register "sar_sampling_time" = "1" # 4us
register "short_key_debounce" = "3" # 30ms
register "jack_insert_debounce" = "7" # 512ms
register "jack_eject_debounce" = "0"
device i2c 1a on end
end
end # I2C #4
device pci 19.2 on end # I2C #4
device pci 1c.0 on
chip drivers/intel/wifi
register "wake" = "GPE0_DW0_16"
@ -201,7 +151,7 @@ chip soc/intel/skylake
device pci 1e.3 off end # GSPI #1
device pci 1e.4 on end # eMMC
device pci 1e.5 off end # SDIO
device pci 1e.6 off end # SDCard
device pci 1e.6 off end # SDCard
device pci 1f.0 on
chip drivers/pc80/tpm
device pnp 0c31.0 on end
@ -212,14 +162,7 @@ chip soc/intel/skylake
end # LPC Interface
device pci 1f.1 on end # P2SB
device pci 1f.2 on end # Power Management Controller
device pci 1f.3 on
chip drivers/generic/max98357a
register "hid" = ""MX98357A""
register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B2)"
register "sdmode_delay" = "5"
device generic 0 on end
end
end # Intel HDA
device pci 1f.3 on end # Intel HDA
device pci 1f.4 on end # SMBus
device pci 1f.5 on end # PCH SPI
device pci 1f.6 off end # GbE

227
src/mainboard/google/glados/variants/asuka/devicetree.cb
View file

@ -1,227 +0,0 @@
chip soc/intel/skylake
register "gpu_pp_up_delay_ms" = "200"
register "gpu_pp_down_delay_ms" = " 50"
register "gpu_pp_cycle_delay_ms" = "500"
register "gpu_pp_backlight_on_delay_ms" = " 1"
register "gpu_pp_backlight_off_delay_ms" = "200"
register "gpu_pch_backlight_pwm_hz" = "1000"
# Enable deep Sx states
register "deep_s3_enable_ac" = "0"
register "deep_s3_enable_dc" = "0"
register "deep_s5_enable_ac" = "1"
register "deep_s5_enable_dc" = "1"
register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN"
# GPE configuration
# Note that GPE events called out in ASL code rely on this
# route. i.e. If this route changes then the affected GPE
# offset bits also need to be changed.
register "gpe0_dw0" = "GPP_B"
register "gpe0_dw1" = "GPP_D"
register "gpe0_dw2" = "GPP_E"
# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
register "gen1_dec" = "0x00fc0801"
register "gen2_dec" = "0x000c0201"
# Enable "Intel Speed Shift Technology"
register "speed_shift_enable" = "1"
# Enable DPTF
register "dptf_enable" = "1"
# FSP Configuration
register "ProbelessTrace" = "0"
register "EnableLan" = "0"
register "EnableSata" = "0"
register "SataSalpSupport" = "0"
register "SataMode" = "0"
register "SataPortsEnable[0]" = "0"
register "EnableAzalia" = "1"
register "DspEnable" = "1"
register "IoBufferOwnership" = "3"
register "EnableTraceHub" = "0"
register "SsicPortEnable" = "0"
register "SmbusEnable" = "1"
register "Cio2Enable" = "0"
register "ScsEmmcEnabled" = "1"
register "ScsEmmcHs400Enabled" = "1"
register "ScsSdCardEnabled" = "0"
register "PttSwitch" = "0"
register "SkipExtGfxScan" = "1"
register "Device4Enable" = "1"
register "HeciEnabled" = "0"
register "SaGv" = "3"
register "PmConfigSlpS3MinAssert" = "2" # 50ms
register "PmConfigSlpS4MinAssert" = "4" # 4s
register "PmConfigSlpSusMinAssert" = "3" # 4s
register "PmConfigSlpAMinAssert" = "3" # 2s
register "PmTimerDisabled" = "1"
register "pirqa_routing" = "PCH_IRQ11"
register "pirqb_routing" = "PCH_IRQ10"
register "pirqc_routing" = "PCH_IRQ11"
register "pirqd_routing" = "PCH_IRQ11"
register "pirqe_routing" = "PCH_IRQ11"
register "pirqf_routing" = "PCH_IRQ11"
register "pirqg_routing" = "PCH_IRQ11"
register "pirqh_routing" = "PCH_IRQ11"
# Enable Root port 1
register "PcieRpEnable[0]" = "1"
# Enable CLKREQ#
register "PcieRpClkReqSupport[0]" = "1"
# RP 1 uses SRCCLKREQ1#
register "PcieRpClkReqNumber[0]" = "1"
register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC0)" # Type-C Port 1
register "usb2_ports[1]" = "USB2_PORT_MID(OC2)" # Card Reader
register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
register "usb2_ports[4]" = "USB2_PORT_MID(OC2)" # Type-A Port (board)
register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera
register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)" # PIC MCU
register "usb2_ports[8]" = "USB2_PORT_LONG(OC3)" # Type-A Port (board)
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Card Reader
register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port (board)
register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port (board)
# Must leave UART0 enabled or SD/eMMC will not work as PCI
register "SerialIoDevMode" = "{
[PchSerialIoIndexI2C0] = PchSerialIoPci,
[PchSerialIoIndexI2C1] = PchSerialIoPci,
[PchSerialIoIndexI2C2] = PchSerialIoDisabled,
[PchSerialIoIndexI2C3] = PchSerialIoDisabled,
[PchSerialIoIndexI2C4] = PchSerialIoPci,
[PchSerialIoIndexI2C5] = PchSerialIoDisabled,
[PchSerialIoIndexSpi0] = PchSerialIoDisabled,
[PchSerialIoIndexSpi1] = PchSerialIoDisabled,
[PchSerialIoIndexUart0] = PchSerialIoPci,
[PchSerialIoIndexUart1] = PchSerialIoDisabled,
[PchSerialIoIndexUart2] = PchSerialIoSkipInit,
}"
# I2C4 is 1.8V
register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8"
# PL2 override 25W
register "tdp_pl2_override" = "25"
# Send an extra VR mailbox command for the PS4 exit issue
register "SendVrMbxCmd" = "2"
# Lock Down
register "common_soc_config" = "{
.chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT,
}"
device cpu_cluster 0 on
device lapic 0 on end
end
device domain 0 on
device pci 00.0 on end # Host Bridge
device pci 02.0 on end # Integrated Graphics Device
device pci 14.0 on end # USB xHCI
device pci 14.1 off end # USB xDCI (OTG)
device pci 14.2 on end # Thermal Subsystem
device pci 15.0 on
chip drivers/i2c/generic
register "hid" = ""ELAN0001""
register "desc" = ""ELAN Touchscreen""
register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
device i2c 10 on end
end
end # I2C #0
device pci 15.1 on
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
register "desc" = ""ELAN Touchpad""
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)"
register "wake" = "GPE0_DW0_05"
device i2c 15 on end
end
end # I2C #1
device pci 15.2 off end # I2C #2
device pci 15.3 off end # I2C #3
device pci 16.0 on end # Management Engine Interface 1
device pci 16.1 off end # Management Engine Interface 2
device pci 16.2 off end # Management Engine IDE-R
device pci 16.3 off end # Management Engine KT Redirection
device pci 16.4 off end # Management Engine Interface 3
device pci 17.0 off end # SATA
device pci 19.0 on end # UART #2
device pci 19.1 off end # I2C #5
device pci 19.2 on
chip drivers/i2c/nau8825
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)"
register "jkdet_enable" = "1"
register "jkdet_pull_enable" = "0" # R389
register "jkdet_polarity" = "1" # ActiveLow
register "vref_impedance" = "2" # 125kOhm
register "micbias_voltage" = "6" # 2.754
register "sar_threshold_num" = "4"
register "sar_threshold[0]" = "0x08"
register "sar_threshold[1]" = "0x12"
register "sar_threshold[2]" = "0x26"
register "sar_threshold[3]" = "0x73"
register "sar_hysteresis" = "0"
register "sar_voltage" = "6"
register "sar_compare_time" = "1" # 1us
register "sar_sampling_time" = "1" # 4us
register "short_key_debounce" = "3" # 30ms
register "jack_insert_debounce" = "7" # 512ms
register "jack_eject_debounce" = "0"
device i2c 1a on end
end
end # I2C #4
device pci 1c.0 on
chip drivers/intel/wifi
register "wake" = "GPE0_DW0_16"
device pci 00.0 on end
end
end # PCI Express Port 1
device pci 1c.1 off end # PCI Express Port 2
device pci 1c.2 off end # PCI Express Port 3
device pci 1c.3 off end # PCI Express Port 4
device pci 1c.4 off end # PCI Express Port 5
device pci 1c.5 off end # PCI Express Port 6
device pci 1c.6 off end # PCI Express Port 7
device pci 1c.7 off end # PCI Express Port 8
device pci 1d.0 off end # PCI Express Port 9
device pci 1d.1 off end # PCI Express Port 10
device pci 1d.2 off end # PCI Express Port 11
device pci 1d.3 off end # PCI Express Port 12
device pci 1e.0 on end # UART #0
device pci 1e.1 off end # UART #1
device pci 1e.2 off end # GSPI #0
device pci 1e.3 off end # GSPI #1
device pci 1e.4 on end # eMMC
device pci 1e.5 off end # SDIO
device pci 1e.6 off end # SDCard
device pci 1f.0 on
chip drivers/pc80/tpm
device pnp 0c31.0 on end
end
chip ec/google/chromeec
device pnp 0c09.0 on end
end
end # LPC Interface
device pci 1f.1 on end # P2SB
device pci 1f.2 on end # Power Management Controller
device pci 1f.3 on
chip drivers/generic/max98357a
register "hid" = ""MX98357A""
register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E3)"
register "sdmode_delay" = "5"
device generic 0 on end
end
end # Intel HDA
device pci 1f.4 on end # SMBus
device pci 1f.5 on end # PCH SPI
device pci 1f.6 off end # GbE
end
end

66
src/mainboard/google/glados/variants/asuka/overridetree.cb Normal file
View file

@ -0,0 +1,66 @@
chip soc/intel/skylake
register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC0)" # Type-C Port 1
register "usb2_ports[1]" = "USB2_PORT_MID(OC2)" # Card Reader
register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
register "usb2_ports[4]" = "USB2_PORT_MID(OC2)" # Type-A Port (board)
register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera
register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)" # PIC MCU
register "usb2_ports[8]" = "USB2_PORT_LONG(OC3)" # Type-A Port (board)
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Card Reader
register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port (board)
register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port (board)
device domain 0 on
device pci 15.0 on
chip drivers/i2c/generic
register "hid" = ""ELAN0001""
register "desc" = ""ELAN Touchscreen""
register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
device i2c 10 on end
end
end # I2C #0
device pci 15.1 on
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
register "desc" = ""ELAN Touchpad""
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)"
register "wake" = "GPE0_DW0_05"
device i2c 15 on end
end
end # I2C #1
device pci 19.2 on
chip drivers/i2c/nau8825
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)"
register "jkdet_enable" = "1"
register "jkdet_pull_enable" = "0" # R389
register "jkdet_polarity" = "1" # ActiveLow
register "vref_impedance" = "2" # 125kOhm
register "micbias_voltage" = "6" # 2.754
register "sar_threshold_num" = "4"
register "sar_threshold[0]" = "0x08"
register "sar_threshold[1]" = "0x12"
register "sar_threshold[2]" = "0x26"
register "sar_threshold[3]" = "0x73"
register "sar_hysteresis" = "0"
register "sar_voltage" = "6"
register "sar_compare_time" = "1" # 1us
register "sar_sampling_time" = "1" # 4us
register "short_key_debounce" = "3" # 30ms
register "jack_insert_debounce" = "7" # 512ms
register "jack_eject_debounce" = "0"
device i2c 1a on end
end
end # I2C #4
device pci 1f.3 on
chip drivers/generic/max98357a
register "hid" = ""MX98357A""
register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E3)"
register "sdmode_delay" = "5"
device generic 0 on end
end
end # Intel HDA
end
end

241
src/mainboard/google/glados/variants/caroline/devicetree.cb
View file

@ -1,241 +0,0 @@
chip soc/intel/skylake
register "gpu_pp_up_delay_ms" = "200"
register "gpu_pp_down_delay_ms" = " 50"
register "gpu_pp_cycle_delay_ms" = "500"
register "gpu_pp_backlight_on_delay_ms" = " 1"
register "gpu_pp_backlight_off_delay_ms" = "200"
register "gpu_pch_backlight_pwm_hz" = "1000"
# Enable deep Sx states
register "deep_s3_enable_ac" = "0"
register "deep_s3_enable_dc" = "0"
register "deep_s5_enable_ac" = "1"
register "deep_s5_enable_dc" = "1"
register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN"
# GPE configuration
# Note that GPE events called out in ASL code rely on this
# route. i.e. If this route changes then the affected GPE
# offset bits also need to be changed.
register "gpe0_dw0" = "GPP_B"
register "gpe0_dw1" = "GPP_D"
register "gpe0_dw2" = "GPP_E"
# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
register "gen1_dec" = "0x00fc0801"
register "gen2_dec" = "0x000c0201"
# Enable "Intel Speed Shift Technology"
register "speed_shift_enable" = "1"
# Enable DPTF
register "dptf_enable" = "1"
# FSP Configuration
register "ProbelessTrace" = "0"
register "EnableLan" = "0"
register "EnableSata" = "0"
register "SataSalpSupport" = "0"
register "SataMode" = "0"
register "SataPortsEnable[0]" = "0"
register "EnableAzalia" = "1"
register "DspEnable" = "1"
register "IoBufferOwnership" = "3"
register "EnableTraceHub" = "0"
register "SsicPortEnable" = "0"
register "SmbusEnable" = "1"
register "Cio2Enable" = "0"
register "ScsEmmcEnabled" = "1"
register "ScsEmmcHs400Enabled" = "1"
register "ScsSdCardEnabled" = "2"
register "PttSwitch" = "0"
register "SkipExtGfxScan" = "1"
register "Device4Enable" = "1"
register "HeciEnabled" = "0"
register "SaGv" = "3"
register "PmConfigSlpS3MinAssert" = "2" # 50ms
register "PmConfigSlpS4MinAssert" = "1" # 1s
register "PmConfigSlpSusMinAssert" = "1" # 500ms
register "PmConfigSlpAMinAssert" = "3" # 2s
register "PmTimerDisabled" = "1"
register "pirqa_routing" = "PCH_IRQ11"
register "pirqb_routing" = "PCH_IRQ10"
register "pirqc_routing" = "PCH_IRQ11"
register "pirqd_routing" = "PCH_IRQ11"
register "pirqe_routing" = "PCH_IRQ11"
register "pirqf_routing" = "PCH_IRQ11"
register "pirqg_routing" = "PCH_IRQ11"
register "pirqh_routing" = "PCH_IRQ11"
# VR Slew rate setting for improving audible noise
register "AcousticNoiseMitigation" = "1"
register "SlowSlewRateForIa" = "3" # Fast/16
register "SlowSlewRateForGt" = "3" # Fast/16
register "SlowSlewRateForSa" = "0" # Fast/2
register "FastPkgCRampDisable" = "0"
# Enable Root port 1
register "PcieRpEnable[0]" = "1"
# Enable CLKREQ#
register "PcieRpClkReqSupport[0]" = "1"
# RP 1 uses SRCCLKREQ1#
register "PcieRpClkReqNumber[0]" = "1"
register "usb2_ports[0]" = "USB2_PORT_MID(OC_SKIP)" # Type-C Port (main)
register "usb2_ports[1]" = "USB2_PORT_MAX(OC_SKIP)" # Type-C Port (sub)
register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
register "usb2_ports[4]" = "USB2_PORT_EMPTY" # Empty
register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera
register "usb2_ports[8]" = "USB2_PORT_EMPTY" # Empty
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port (main)
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port (sub)
register "usb3_ports[2]" = "USB3_PORT_EMPTY" # Empty
register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Empty
# Must leave UART0 enabled or SD/eMMC will not work as PCI
register "SerialIoDevMode" = "{
[PchSerialIoIndexI2C0] = PchSerialIoPci,
[PchSerialIoIndexI2C1] = PchSerialIoPci,
[PchSerialIoIndexI2C2] = PchSerialIoDisabled,
[PchSerialIoIndexI2C3] = PchSerialIoDisabled,
[PchSerialIoIndexI2C4] = PchSerialIoPci,
[PchSerialIoIndexI2C5] = PchSerialIoDisabled,
[PchSerialIoIndexSpi0] = PchSerialIoDisabled,
[PchSerialIoIndexSpi1] = PchSerialIoDisabled,
[PchSerialIoIndexUart0] = PchSerialIoPci,
[PchSerialIoIndexUart1] = PchSerialIoDisabled,
[PchSerialIoIndexUart2] = PchSerialIoSkipInit,
}"
# I2C4 is 1.8V
register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8"
# PL2 override 15W
register "tdp_pl2_override" = "15"
# Send an extra VR mailbox command for the supported MPS IMVP8 model
register "SendVrMbxCmd" = "1"
# TCC of 90C
register "tcc_offset" = "10"
# Lock Down
register "common_soc_config" = "{
.chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT,
}"
device cpu_cluster 0 on
device lapic 0 on end
end
device domain 0 on
device pci 00.0 on end # Host Bridge
device pci 02.0 on end # Integrated Graphics Device
device pci 14.0 on end # USB xHCI
device pci 14.1 off end # USB xDCI (OTG)
device pci 14.2 on end # Thermal Subsystem
device pci 15.0 on
chip drivers/i2c/generic
register "hid" = ""ATML0001""
register "desc" = ""Atmel Touchscreen""
register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
device i2c 4b on end
end
end # I2C #0
device pci 15.1 on
chip drivers/i2c/generic
register "hid" = ""ATML0000""
register "desc" = ""Atmel Touchpad""
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)"
register "wake" = "GPE0_DW0_05"
device i2c 4a on end
end
end # I2C #1
device pci 15.2 off end # I2C #2
device pci 15.3 off end # I2C #3
device pci 16.0 on end # Management Engine Interface 1
device pci 16.1 off end # Management Engine Interface 2
device pci 16.2 off end # Management Engine IDE-R
device pci 16.3 off end # Management Engine KT Redirection
device pci 16.4 off end # Management Engine Interface 3
device pci 17.0 off end # SATA
device pci 19.0 on end # UART #2
device pci 19.1 off end # I2C #5
device pci 19.2 on
chip drivers/i2c/nau8825
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)"
register "jkdet_enable" = "1"
register "jkdet_pull_enable" = "0" # R389
register "jkdet_polarity" = "1" # ActiveLow
register "vref_impedance" = "2" # 125kOhm
register "micbias_voltage" = "6" # 2.754
register "sar_threshold_num" = "4"
register "sar_threshold[0]" = "0x0c"
register "sar_threshold[1]" = "0x1c"
register "sar_threshold[2]" = "0x38"
register "sar_threshold[3]" = "0x60"
register "sar_hysteresis" = "1"
register "sar_voltage" = "0" # VDDA
register "sar_compare_time" = "0" # 500ns
register "sar_sampling_time" = "0" # 2us
register "short_key_debounce" = "2" # 100ms
register "jack_insert_debounce" = "4" # 64ms
register "jack_eject_debounce" = "4" # 64ms
device i2c 1a on end
end
chip drivers/i2c/generic
register "hid" = ""INT343B""
register "desc" = ""SSM4567 Left Speaker Amp""
register "uid" = "0"
device i2c 34 on end
end
chip drivers/i2c/generic
register "hid" = ""INT343B""
register "desc" = ""SSM4567 Right Speaker Amp""
register "uid" = "1"
device i2c 35 on end
end
end # I2C #4
device pci 1c.0 on
chip drivers/intel/wifi
register "wake" = "GPE0_DW0_16"
device pci 00.0 on end
end
end # PCI Express Port 1
device pci 1c.1 off end # PCI Express Port 2
device pci 1c.2 off end # PCI Express Port 3
device pci 1c.3 off end # PCI Express Port 4
device pci 1c.4 off end # PCI Express Port 5
device pci 1c.5 off end # PCI Express Port 6
device pci 1c.6 off end # PCI Express Port 7
device pci 1c.7 off end # PCI Express Port 8
device pci 1d.0 off end # PCI Express Port 9
device pci 1d.1 off end # PCI Express Port 10
device pci 1d.2 off end # PCI Express Port 11
device pci 1d.3 off end # PCI Express Port 12
device pci 1e.0 on end # UART #0
device pci 1e.1 off end # UART #1
device pci 1e.2 off end # GSPI #0
device pci 1e.3 off end # GSPI #1
device pci 1e.4 on end # eMMC
device pci 1e.5 off end # SDIO
device pci 1e.6 on end # SDCard
device pci 1f.0 on
chip drivers/pc80/tpm
device pnp 0c31.0 on end
end
chip ec/google/chromeec
device pnp 0c09.0 on end
end
end # LPC Interface
device pci 1f.1 on end # P2SB
device pci 1f.2 on end # Power Management Controller
device pci 1f.3 on end # Intel HDA
device pci 1f.4 on end # SMBus
device pci 1f.5 on end # PCH SPI
device pci 1f.6 off end # GbE
end
end

91
src/mainboard/google/glados/variants/caroline/overridetree.cb Normal file
View file

@ -0,0 +1,91 @@
chip soc/intel/skylake
register "ScsSdCardEnabled" = "2"
register "PmConfigSlpS4MinAssert" = "1" # 1s
register "PmConfigSlpSusMinAssert" = "1" # 500ms
# VR Slew rate setting for improving audible noise
register "AcousticNoiseMitigation" = "1"
register "SlowSlewRateForIa" = "3" # Fast/16
register "SlowSlewRateForGt" = "3" # Fast/16
register "SlowSlewRateForSa" = "0" # Fast/2
register "FastPkgCRampDisable" = "0"
register "usb2_ports[0]" = "USB2_PORT_MID(OC_SKIP)" # Type-C Port (main)
register "usb2_ports[1]" = "USB2_PORT_MAX(OC_SKIP)" # Type-C Port (sub)
register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
register "usb2_ports[4]" = "USB2_PORT_EMPTY" # Empty
register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera
register "usb2_ports[8]" = "USB2_PORT_EMPTY" # Empty
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port (main)
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port (sub)
register "usb3_ports[2]" = "USB3_PORT_EMPTY" # Empty
register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Empty
# PL2 override 15W
register "tdp_pl2_override" = "15"
# Send an extra VR mailbox command for the supported MPS IMVP8 model
register "SendVrMbxCmd" = "1"
# TCC of 90C
register "tcc_offset" = "10"
device domain 0 on
device pci 15.0 on
chip drivers/i2c/generic
register "hid" = ""ATML0001""
register "desc" = ""Atmel Touchscreen""
register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
device i2c 4b on end
end
end # I2C #0
device pci 15.1 on
chip drivers/i2c/generic
register "hid" = ""ATML0000""
register "desc" = ""Atmel Touchpad""
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)"
register "wake" = "GPE0_DW0_05"
device i2c 4a on end
end
end # I2C #1
device pci 19.2 on
chip drivers/i2c/nau8825
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)"
register "jkdet_enable" = "1"
register "jkdet_pull_enable" = "0" # R389
register "jkdet_polarity" = "1" # ActiveLow
register "vref_impedance" = "2" # 125kOhm
register "micbias_voltage" = "6" # 2.754
register "sar_threshold_num" = "4"
register "sar_threshold[0]" = "0x0c"
register "sar_threshold[1]" = "0x1c"
register "sar_threshold[2]" = "0x38"
register "sar_threshold[3]" = "0x60"
register "sar_hysteresis" = "1"
register "sar_voltage" = "0" # VDDA
register "sar_compare_time" = "0" # 500ns
register "sar_sampling_time" = "0" # 2us
register "short_key_debounce" = "2" # 100ms
register "jack_insert_debounce" = "4" # 64ms
register "jack_eject_debounce" = "4" # 64ms
device i2c 1a on end
end
chip drivers/i2c/generic
register "hid" = ""INT343B""
register "desc" = ""SSM4567 Left Speaker Amp""
register "uid" = "0"
device i2c 34 on end
end
chip drivers/i2c/generic
register "hid" = ""INT343B""
register "desc" = ""SSM4567 Right Speaker Amp""
register "uid" = "1"
device i2c 35 on end
end
end # I2C #4
device pci 1e.6 on end # SDCard
end
end

232
src/mainboard/google/glados/variants/cave/devicetree.cb
View file

@ -1,232 +0,0 @@
chip soc/intel/skylake
register "gpu_pp_up_delay_ms" = "200"
register "gpu_pp_down_delay_ms" = " 50"
register "gpu_pp_cycle_delay_ms" = "500"
register "gpu_pp_backlight_on_delay_ms" = " 1"
register "gpu_pp_backlight_off_delay_ms" = "200"
register "gpu_pch_backlight_pwm_hz" = "1000"
# Enable deep Sx states
register "deep_s3_enable_ac" = "0"
register "deep_s3_enable_dc" = "0"
register "deep_s5_enable_ac" = "1"
register "deep_s5_enable_dc" = "1"
register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN"
# GPE configuration
# Note that GPE events called out in ASL code rely on this
# route. i.e. If this route changes then the affected GPE
# offset bits also need to be changed.
register "gpe0_dw0" = "GPP_B"
register "gpe0_dw1" = "GPP_D"
register "gpe0_dw2" = "GPP_E"
# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
register "gen1_dec" = "0x00fc0801"
register "gen2_dec" = "0x000c0201"
# Enable "Intel Speed Shift Technology"
register "speed_shift_enable" = "1"
# Enable DPTF
register "dptf_enable" = "1"
# FSP Configuration
register "ProbelessTrace" = "0"
register "EnableLan" = "0"
register "EnableSata" = "0"
register "SataSalpSupport" = "0"
register "SataMode" = "0"
register "SataPortsEnable[0]" = "0"
register "EnableAzalia" = "1"
register "DspEnable" = "1"
register "IoBufferOwnership" = "3"
register "EnableTraceHub" = "0"
register "SsicPortEnable" = "0"
register "SmbusEnable" = "1"
register "Cio2Enable" = "0"
register "ScsEmmcEnabled" = "1"
register "ScsEmmcHs400Enabled" = "1"
register "ScsSdCardEnabled" = "2"
register "PttSwitch" = "0"
register "SkipExtGfxScan" = "1"
register "Device4Enable" = "1"
register "HeciEnabled" = "0"
register "SaGv" = "3"
register "PmConfigSlpS3MinAssert" = "2" # 50ms
register "PmConfigSlpS4MinAssert" = "1" # 1s
register "PmConfigSlpSusMinAssert" = "1" # 500ms
register "PmConfigSlpAMinAssert" = "3" # 2s
register "PmTimerDisabled" = "1"
register "pirqa_routing" = "PCH_IRQ11"
register "pirqb_routing" = "PCH_IRQ10"
register "pirqc_routing" = "PCH_IRQ11"
register "pirqd_routing" = "PCH_IRQ11"
register "pirqe_routing" = "PCH_IRQ11"
register "pirqf_routing" = "PCH_IRQ11"
register "pirqg_routing" = "PCH_IRQ11"
register "pirqh_routing" = "PCH_IRQ11"
# Enable Root port 1
register "PcieRpEnable[0]" = "1"
# Enable CLKREQ#
register "PcieRpClkReqSupport[0]" = "1"
# RP 1 uses SRCCLKREQ1#
register "PcieRpClkReqNumber[0]" = "1"
register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port (board)
register "usb2_ports[1]" = "USB2_PORT_MAX(OC_SKIP)" # Type-C Port (flex)
register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
register "usb2_ports[4]" = "USB2_PORT_EMPTY" # Type-A Port 1
register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera
register "usb2_ports[8]" = "USB2_PORT_EMPTY" # Type-A Port 2
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port (board)
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port (flex)
register "usb3_ports[2]" = "USB3_PORT_EMPTY" # Type-A Port 1
register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Type-A Port 2
# Must leave UART0 enabled or SD/eMMC will not work as PCI
register "SerialIoDevMode" = "{
[PchSerialIoIndexI2C0] = PchSerialIoPci,
[PchSerialIoIndexI2C1] = PchSerialIoPci,
[PchSerialIoIndexI2C2] = PchSerialIoDisabled,
[PchSerialIoIndexI2C3] = PchSerialIoDisabled,
[PchSerialIoIndexI2C4] = PchSerialIoPci,
[PchSerialIoIndexI2C5] = PchSerialIoDisabled,
[PchSerialIoIndexSpi0] = PchSerialIoDisabled,
[PchSerialIoIndexSpi1] = PchSerialIoDisabled,
[PchSerialIoIndexUart0] = PchSerialIoPci,
[PchSerialIoIndexUart1] = PchSerialIoDisabled,
[PchSerialIoIndexUart2] = PchSerialIoSkipInit,
}"
# I2C4 is 1.8V
register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8"
# PL2 override 15W
register "tdp_pl2_override" = "15"
# Send an extra VR mailbox command for the supported MPS IMVP8 model
register "SendVrMbxCmd" = "1"
# TCC of 90C
register "tcc_offset" = "10"
# Use default SD card detect GPIO configuration
register "sdcard_cd_gpio_default" = "GPP_A7"
# Lock Down
register "common_soc_config" = "{
.chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT,
}"
device cpu_cluster 0 on
device lapic 0 on end
end
device domain 0 on
device pci 00.0 on end # Host Bridge
device pci 02.0 on end # Integrated Graphics Device
device pci 14.0 on end # USB xHCI
device pci 14.1 off end # USB xDCI (OTG)
device pci 14.2 on end # Thermal Subsystem
device pci 15.0 on
chip drivers/i2c/generic
register "hid" = ""ELAN0001""
register "desc" = ""ELAN Touchscreen""
register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
device i2c 10 on end
end
end # I2C #0
device pci 15.1 on
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
register "desc" = ""ELAN Touchpad""
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)"
register "wake" = "GPE0_DW0_05"
device i2c 15 on end
end
end # I2C #1
device pci 15.2 off end # I2C #2
device pci 15.3 off end # I2C #3
device pci 16.0 on end # Management Engine Interface 1
device pci 16.1 off end # Management Engine Interface 2
device pci 16.2 off end # Management Engine IDE-R
device pci 16.3 off end # Management Engine KT Redirection
device pci 16.4 off end # Management Engine Interface 3
device pci 17.0 off end # SATA
device pci 19.0 on end # UART #2
device pci 19.1 off end # I2C #5
device pci 19.2 on
chip drivers/i2c/nau8825
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)"
register "jkdet_enable" = "1"
register "jkdet_pull_enable" = "0" # R389
register "jkdet_polarity" = "1" # ActiveLow
register "vref_impedance" = "2" # 125kOhm
register "micbias_voltage" = "6" # 2.754
register "sar_threshold_num" = "4"
register "sar_threshold[0]" = "0x0c"
register "sar_threshold[1]" = "0x1e"
register "sar_threshold[2]" = "0x38"
register "sar_threshold[3]" = "0x60"
register "sar_hysteresis" = "1"
register "sar_voltage" = "0" # VDDA
register "sar_compare_time" = "0" # 500ns
register "sar_sampling_time" = "0" # 2us
register "short_key_debounce" = "2" # 100ms
register "jack_insert_debounce" = "7" # 512ms
register "jack_eject_debounce" = "7" # 512ms
device i2c 1a on end
end
end # I2C #4
device pci 1c.0 on
chip drivers/intel/wifi
register "wake" = "GPE0_DW0_16"
device pci 00.0 on end
end
end # PCI Express Port 1
device pci 1c.1 off end # PCI Express Port 2
device pci 1c.2 off end # PCI Express Port 3
device pci 1c.3 off end # PCI Express Port 4
device pci 1c.4 off end # PCI Express Port 5
device pci 1c.5 off end # PCI Express Port 6
device pci 1c.6 off end # PCI Express Port 7
device pci 1c.7 off end # PCI Express Port 8
device pci 1d.0 off end # PCI Express Port 9
device pci 1d.1 off end # PCI Express Port 10
device pci 1d.2 off end # PCI Express Port 11
device pci 1d.3 off end # PCI Express Port 12
device pci 1e.0 on end # UART #0
device pci 1e.1 off end # UART #1
device pci 1e.2 off end # GSPI #0
device pci 1e.3 off end # GSPI #1
device pci 1e.4 on end # eMMC
device pci 1e.5 off end # SDIO
device pci 1e.6 on end # SDCard
device pci 1f.0 on
chip drivers/pc80/tpm
device pnp 0c31.0 on end
end
chip ec/google/chromeec
device pnp 0c09.0 on end
end
end # LPC Interface
device pci 1f.1 on end # P2SB
device pci 1f.2 on end # Power Management Controller
device pci 1f.3 on
chip drivers/generic/max98357a
register "hid" = ""MX98357A""
register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E3)"
register "sdmode_delay" = "5"
device generic 0 on end
end
end # Intel HDA
device pci 1f.4 on end # SMBus
device pci 1f.5 on end # PCH SPI
device pci 1f.6 off end # GbE
end
end

83
src/mainboard/google/glados/variants/cave/overridetree.cb Normal file
View file

@ -0,0 +1,83 @@
chip soc/intel/skylake
register "ScsSdCardEnabled" = "2"
register "PmConfigSlpS4MinAssert" = "1" # 1s
register "PmConfigSlpSusMinAssert" = "1" # 500ms
register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port (board)
register "usb2_ports[1]" = "USB2_PORT_MAX(OC_SKIP)" # Type-C Port (flex)
register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
register "usb2_ports[4]" = "USB2_PORT_EMPTY" # Type-A Port 1
register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera
register "usb2_ports[8]" = "USB2_PORT_EMPTY" # Type-A Port 2
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port (board)
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port (flex)
register "usb3_ports[2]" = "USB3_PORT_EMPTY" # Type-A Port 1
register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Type-A Port 2
# PL2 override 15W
register "tdp_pl2_override" = "15"
# Send an extra VR mailbox command for the supported MPS IMVP8 model
register "SendVrMbxCmd" = "1"
# TCC of 90C
register "tcc_offset" = "10"
# Use default SD card detect GPIO configuration
register "sdcard_cd_gpio_default" = "GPP_A7"
device domain 0 on
device pci 15.0 on
chip drivers/i2c/generic
register "hid" = ""ELAN0001""
register "desc" = ""ELAN Touchscreen""
register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
device i2c 10 on end
end
end # I2C #0
device pci 15.1 on
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
register "desc" = ""ELAN Touchpad""
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)"
register "wake" = "GPE0_DW0_05"
device i2c 15 on end
end
end # I2C #1
device pci 19.2 on
chip drivers/i2c/nau8825
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)"
register "jkdet_enable" = "1"
register "jkdet_pull_enable" = "0" # R389
register "jkdet_polarity" = "1" # ActiveLow
register "vref_impedance" = "2" # 125kOhm
register "micbias_voltage" = "6" # 2.754
register "sar_threshold_num" = "4"
register "sar_threshold[0]" = "0x0c"
register "sar_threshold[1]" = "0x1e"
register "sar_threshold[2]" = "0x38"
register "sar_threshold[3]" = "0x60"
register "sar_hysteresis" = "1"
register "sar_voltage" = "0" # VDDA
register "sar_compare_time" = "0" # 500ns
register "sar_sampling_time" = "0" # 2us
register "short_key_debounce" = "2" # 100ms
register "jack_insert_debounce" = "7" # 512ms
register "jack_eject_debounce" = "7" # 512ms
device i2c 1a on end
end
end # I2C #4
device pci 1e.6 on end # SDCard
device pci 1f.3 on
chip drivers/generic/max98357a
register "hid" = ""MX98357A""
register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E3)"
register "sdmode_delay" = "5"
device generic 0 on end
end
end # Intel HDA
end
end

228
src/mainboard/google/glados/variants/chell/devicetree.cb
View file

@ -1,228 +0,0 @@
chip soc/intel/skylake
register "gpu_pp_up_delay_ms" = "200"
register "gpu_pp_down_delay_ms" = " 50"
register "gpu_pp_cycle_delay_ms" = "500"
register "gpu_pp_backlight_on_delay_ms" = " 1"
register "gpu_pp_backlight_off_delay_ms" = "200"
register "gpu_pch_backlight_pwm_hz" = "1000"
# Enable deep Sx states
register "deep_s3_enable_ac" = "0"
register "deep_s3_enable_dc" = "0"
register "deep_s5_enable_ac" = "1"
register "deep_s5_enable_dc" = "1"
register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN"
# GPE configuration
# Note that GPE events called out in ASL code rely on this
# route. i.e. If this route changes then the affected GPE
# offset bits also need to be changed.
register "gpe0_dw0" = "GPP_B"
register "gpe0_dw1" = "GPP_D"
register "gpe0_dw2" = "GPP_E"
# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
register "gen1_dec" = "0x00fc0801"
register "gen2_dec" = "0x000c0201"
# Enable "Intel Speed Shift Technology"
register "speed_shift_enable" = "1"
# Enable DPTF
register "dptf_enable" = "1"
# FSP Configuration
register "ProbelessTrace" = "0"
register "EnableLan" = "0"
register "EnableSata" = "0"
register "SataSalpSupport" = "0"
register "SataMode" = "0"
register "SataPortsEnable[0]" = "0"
register "EnableAzalia" = "1"
register "DspEnable" = "1"
register "IoBufferOwnership" = "3"
register "EnableTraceHub" = "0"
register "SsicPortEnable" = "0"
register "SmbusEnable" = "1"
register "Cio2Enable" = "0"
register "ScsEmmcEnabled" = "1"
register "ScsEmmcHs400Enabled" = "1"
register "ScsSdCardEnabled" = "0"
register "PttSwitch" = "0"
register "SkipExtGfxScan" = "1"
register "Device4Enable" = "1"
register "HeciEnabled" = "0"
register "SaGv" = "3"
register "PmConfigSlpS3MinAssert" = "2" # 50ms
register "PmConfigSlpS4MinAssert" = "1" # 1s
register "PmConfigSlpSusMinAssert" = "1" # 500ms
register "PmConfigSlpAMinAssert" = "3" # 2s
register "PmTimerDisabled" = "1"
register "pirqa_routing" = "PCH_IRQ11"
register "pirqb_routing" = "PCH_IRQ10"
register "pirqc_routing" = "PCH_IRQ11"
register "pirqd_routing" = "PCH_IRQ11"
register "pirqe_routing" = "PCH_IRQ11"
register "pirqf_routing" = "PCH_IRQ11"
register "pirqg_routing" = "PCH_IRQ11"
register "pirqh_routing" = "PCH_IRQ11"
# Enable Root port 1
register "PcieRpEnable[0]" = "1"
# Enable CLKREQ#
register "PcieRpClkReqSupport[0]" = "1"
# RP 1 uses SRCCLKREQ1#
register "PcieRpClkReqNumber[0]" = "1"
register "usb2_ports[0]" = "USB2_PORT_LONG(OC2)" # Type-C Port 1
register "usb2_ports[1]" = "USB2_PORT_LONG(OC3)" # Type-C Port 2
register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
register "usb2_ports[4]" = "USB2_PORT_MID(OC0)" # Type-A Port
register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera
register "usb2_ports[8]" = "USB2_PORT_MID(OC_SKIP)" # SD
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-C Port 1
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)" # Type-C Port 2
register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port
register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # SD
# Must leave UART0 enabled or SD/eMMC will not work as PCI
register "SerialIoDevMode" = "{
[PchSerialIoIndexI2C0] = PchSerialIoPci,
[PchSerialIoIndexI2C1] = PchSerialIoPci,
[PchSerialIoIndexI2C2] = PchSerialIoDisabled,
[PchSerialIoIndexI2C3] = PchSerialIoDisabled,
[PchSerialIoIndexI2C4] = PchSerialIoPci,
[PchSerialIoIndexI2C5] = PchSerialIoDisabled,
[PchSerialIoIndexSpi0] = PchSerialIoDisabled,
[PchSerialIoIndexSpi1] = PchSerialIoDisabled,
[PchSerialIoIndexUart0] = PchSerialIoPci,
[PchSerialIoIndexUart1] = PchSerialIoDisabled,
[PchSerialIoIndexUart2] = PchSerialIoSkipInit,
}"
# I2C4 is 1.8V
register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8"
# PL2 override 15W
register "tdp_pl2_override" = "15"
# Send an extra VR mailbox command for the supported MPS IMVP8 model
register "SendVrMbxCmd" = "1"
# TCC of 90C
register "tcc_offset" = "10"
# Lock Down
register "common_soc_config" = "{
.chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT,
}"
device cpu_cluster 0 on
device lapic 0 on end
end
device domain 0 on
device pci 00.0 on end # Host Bridge
device pci 02.0 on end # Integrated Graphics Device
device pci 14.0 on end # USB xHCI
device pci 14.1 off end # USB xDCI (OTG)
device pci 14.2 on end # Thermal Subsystem
device pci 15.0 on end # I2C #0
device pci 15.1 on
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
register "desc" = ""ELAN Touchpad""
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)"
register "wake" = "GPE0_DW0_05"
device i2c 15 on end
end
end # I2C #1
device pci 15.2 off end # I2C #2
device pci 15.3 off end # I2C #3
device pci 16.0 on end # Management Engine Interface 1
device pci 16.1 off end # Management Engine Interface 2
device pci 16.2 off end # Management Engine IDE-R
device pci 16.3 off end # Management Engine KT Redirection
device pci 16.4 off end # Management Engine Interface 3
device pci 17.0 off end # SATA
device pci 19.0 on end # UART #2
device pci 19.1 off end # I2C #5
device pci 19.2 on
chip drivers/i2c/nau8825
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)"
register "jkdet_enable" = "1"
register "jkdet_pull_enable" = "0" # R389
register "jkdet_polarity" = "1" # ActiveLow
register "vref_impedance" = "2" # 125kOhm
register "micbias_voltage" = "6" # 2.754
register "sar_threshold_num" = "4"
register "sar_threshold[0]" = "0x0c"
register "sar_threshold[1]" = "0x1c"
register "sar_threshold[2]" = "0x38"
register "sar_threshold[3]" = "0x60"
register "sar_hysteresis" = "1"
register "sar_voltage" = "0" # VDDA
register "sar_compare_time" = "0" # 500ns
register "sar_sampling_time" = "0" # 2us
register "short_key_debounce" = "2" # 100ms
register "jack_insert_debounce" = "7" # 512ms
register "jack_eject_debounce" = "7" # 512ms
device i2c 1a on end
end
chip drivers/i2c/generic
register "hid" = ""INT343B""
register "desc" = ""SSM4567 Left Speaker Amp""
register "uid" = "0"
device i2c 34 on end
end
chip drivers/i2c/generic
register "hid" = ""INT343B""
register "desc" = ""SSM4567 Right Speaker Amp""
register "uid" = "1"
device i2c 35 on end
end
end # I2C #4
device pci 1c.0 on
chip drivers/intel/wifi
register "wake" = "GPE0_DW0_16"
device pci 00.0 on end
end
end # PCI Express Port 1
device pci 1c.1 off end # PCI Express Port 2
device pci 1c.2 off end # PCI Express Port 3
device pci 1c.3 off end # PCI Express Port 4
device pci 1c.4 off end # PCI Express Port 5
device pci 1c.5 off end # PCI Express Port 6
device pci 1c.6 off end # PCI Express Port 7
device pci 1c.7 off end # PCI Express Port 8
device pci 1d.0 off end # PCI Express Port 9
device pci 1d.1 off end # PCI Express Port 10
device pci 1d.2 off end # PCI Express Port 11
device pci 1d.3 off end # PCI Express Port 12
device pci 1e.0 on end # UART #0
device pci 1e.1 off end # UART #1
device pci 1e.2 off end # GSPI #0
device pci 1e.3 off end # GSPI #1
device pci 1e.4 on end # eMMC
device pci 1e.5 off end # SDIO
device pci 1e.6 off end # SDCard
device pci 1f.0 on
chip drivers/pc80/tpm
device pnp 0c31.0 on end
end
chip ec/google/chromeec
device pnp 0c09.0 on end
end
end # LPC Interface
device pci 1f.1 on end # P2SB
device pci 1f.2 on end # Power Management Controller
device pci 1f.3 on end # Intel HDA
device pci 1f.4 on end # SMBus
device pci 1f.5 on end # PCH SPI
device pci 1f.6 off end # GbE
end
end

73
src/mainboard/google/glados/variants/chell/overridetree.cb Normal file
View file

@ -0,0 +1,73 @@
chip soc/intel/skylake
register "PmConfigSlpS4MinAssert" = "1" # 1s
register "PmConfigSlpSusMinAssert" = "1" # 500ms
register "usb2_ports[0]" = "USB2_PORT_LONG(OC2)" # Type-C Port 1
register "usb2_ports[1]" = "USB2_PORT_LONG(OC3)" # Type-C Port 2
register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
register "usb2_ports[4]" = "USB2_PORT_MID(OC0)" # Type-A Port
register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera
register "usb2_ports[8]" = "USB2_PORT_MID(OC_SKIP)" # SD
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-C Port 1
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)" # Type-C Port 2
register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port
register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # SD
# PL2 override 15W
register "tdp_pl2_override" = "15"
# Send an extra VR mailbox command for the supported MPS IMVP8 model
register "SendVrMbxCmd" = "1"
# TCC of 90C
register "tcc_offset" = "10"
device domain 0 on
device pci 15.1 on
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
register "desc" = ""ELAN Touchpad""
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)"
register "wake" = "GPE0_DW0_05"
device i2c 15 on end
end
end # I2C #1
device pci 19.2 on
chip drivers/i2c/nau8825
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)"
register "jkdet_enable" = "1"
register "jkdet_pull_enable" = "0" # R389
register "jkdet_polarity" = "1" # ActiveLow
register "vref_impedance" = "2" # 125kOhm
register "micbias_voltage" = "6" # 2.754
register "sar_threshold_num" = "4"
register "sar_threshold[0]" = "0x0c"
register "sar_threshold[1]" = "0x1c"
register "sar_threshold[2]" = "0x38"
register "sar_threshold[3]" = "0x60"
register "sar_hysteresis" = "1"
register "sar_voltage" = "0" # VDDA
register "sar_compare_time" = "0" # 500ns
register "sar_sampling_time" = "0" # 2us
register "short_key_debounce" = "2" # 100ms
register "jack_insert_debounce" = "7" # 512ms
register "jack_eject_debounce" = "7" # 512ms
device i2c 1a on end
end
chip drivers/i2c/generic
register "hid" = ""INT343B""
register "desc" = ""SSM4567 Left Speaker Amp""
register "uid" = "0"
device i2c 34 on end
end
chip drivers/i2c/generic
register "hid" = ""INT343B""
register "desc" = ""SSM4567 Right Speaker Amp""
register "uid" = "1"
device i2c 35 on end
end
end # I2C #4
end
end

234
src/mainboard/google/glados/variants/glados/devicetree.cb
View file

@ -1,234 +0,0 @@
chip soc/intel/skylake
register "gpu_pp_up_delay_ms" = "200"
register "gpu_pp_down_delay_ms" = " 50"
register "gpu_pp_cycle_delay_ms" = "500"
register "gpu_pp_backlight_on_delay_ms" = " 1"
register "gpu_pp_backlight_off_delay_ms" = "200"
register "gpu_pch_backlight_pwm_hz" = "1000"
# Enable deep Sx states
register "deep_s3_enable_ac" = "0"
register "deep_s3_enable_dc" = "0"
register "deep_s5_enable_ac" = "1"
register "deep_s5_enable_dc" = "1"
register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN"
# GPE configuration
# Note that GPE events called out in ASL code rely on this
# route. i.e. If this route changes then the affected GPE
# offset bits also need to be changed.
register "gpe0_dw0" = "GPP_B"
register "gpe0_dw1" = "GPP_D"
register "gpe0_dw2" = "GPP_E"
# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
register "gen1_dec" = "0x00fc0801"
register "gen2_dec" = "0x000c0201"
# Enable "Intel Speed Shift Technology"
register "speed_shift_enable" = "1"
# Enable DPTF
register "dptf_enable" = "1"
# FSP Configuration
register "ProbelessTrace" = "0"
register "EnableLan" = "0"
register "EnableSata" = "0"
register "SataSalpSupport" = "0"
register "SataMode" = "0"
register "SataPortsEnable[0]" = "0"
register "EnableAzalia" = "1"
register "DspEnable" = "1"
register "IoBufferOwnership" = "3"
register "EnableTraceHub" = "0"
register "SsicPortEnable" = "0"
register "SmbusEnable" = "1"
register "Cio2Enable" = "0"
register "ScsEmmcEnabled" = "1"
register "ScsEmmcHs400Enabled" = "1"
register "ScsSdCardEnabled" = "2"
register "PttSwitch" = "0"
register "SkipExtGfxScan" = "1"
register "Device4Enable" = "1"
register "HeciEnabled" = "0"
register "SaGv" = "3"
register "PmConfigSlpS3MinAssert" = "2" # 50ms
register "PmConfigSlpS4MinAssert" = "1" # 1s
register "PmConfigSlpSusMinAssert" = "1" # 500ms
register "PmConfigSlpAMinAssert" = "3" # 2s
register "PmTimerDisabled" = "1"
register "pirqa_routing" = "PCH_IRQ11"
register "pirqb_routing" = "PCH_IRQ10"
register "pirqc_routing" = "PCH_IRQ11"
register "pirqd_routing" = "PCH_IRQ11"
register "pirqe_routing" = "PCH_IRQ11"
register "pirqf_routing" = "PCH_IRQ11"
register "pirqg_routing" = "PCH_IRQ11"
register "pirqh_routing" = "PCH_IRQ11"
# Enable Root port 1
register "PcieRpEnable[0]" = "1"
# Enable CLKREQ#
register "PcieRpClkReqSupport[0]" = "1"
# RP 1 uses SRCCLKREQ1#
register "PcieRpClkReqNumber[0]" = "1"
register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC2)" # Type-C Port (board)
register "usb2_ports[1]" = "USB2_PORT_MAX(OC3)" # Type-C Port (flex)
register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
register "usb2_ports[4]" = "USB2_PORT_MID(OC0)" # Type-A Port 1
register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera
register "usb2_ports[8]" = "USB2_PORT_MID(OC1)" # Type-A Port 2
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-C Port (board)
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)" # Type-C Port (flex)
register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port 1
register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port 2
# Must leave UART0 enabled or SD/eMMC will not work as PCI
register "SerialIoDevMode" = "{
[PchSerialIoIndexI2C0] = PchSerialIoPci,
[PchSerialIoIndexI2C1] = PchSerialIoPci,
[PchSerialIoIndexI2C2] = PchSerialIoDisabled,
[PchSerialIoIndexI2C3] = PchSerialIoDisabled,
[PchSerialIoIndexI2C4] = PchSerialIoPci,
[PchSerialIoIndexI2C5] = PchSerialIoDisabled,
[PchSerialIoIndexSpi0] = PchSerialIoDisabled,
[PchSerialIoIndexSpi1] = PchSerialIoDisabled,
[PchSerialIoIndexUart0] = PchSerialIoPci,
[PchSerialIoIndexUart1] = PchSerialIoDisabled,
[PchSerialIoIndexUart2] = PchSerialIoSkipInit,
}"
# I2C4 is 1.8V
register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8"
# PL2 override 15W
register "tdp_pl2_override" = "15"
# Send an extra VR mailbox command for the supported MPS IMVP8 model
register "SendVrMbxCmd" = "1"
# TCC of 90C
register "tcc_offset" = "10"
# Lock Down
register "common_soc_config" = "{
.chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT,
}"
device cpu_cluster 0 on
device lapic 0 on end
end
device domain 0 on
device pci 00.0 on end # Host Bridge
device pci 02.0 on end # Integrated Graphics Device
device pci 14.0 on end # USB xHCI
device pci 14.1 off end # USB xDCI (OTG)
device pci 14.2 on end # Thermal Subsystem
device pci 15.0 on
chip drivers/i2c/generic
register "hid" = ""ELAN0001""
register "desc" = ""ELAN Touchscreen""
register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
device i2c 10 on end
end
end # I2C #0
device pci 15.1 on
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
register "desc" = ""ELAN Touchpad""
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)"
register "wake" = "GPE0_DW0_05"
device i2c 15 on end
end
end # I2C #1
device pci 15.2 off end # I2C #2
device pci 15.3 off end # I2C #3
device pci 16.0 on end # Management Engine Interface 1
device pci 16.1 off end # Management Engine Interface 2
device pci 16.2 off end # Management Engine IDE-R
device pci 16.3 off end # Management Engine KT Redirection
device pci 16.4 off end # Management Engine Interface 3
device pci 17.0 off end # SATA
device pci 19.0 on end # UART #2
device pci 19.1 off end # I2C #5
device pci 19.2 on
chip drivers/i2c/nau8825
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)"
register "jkdet_enable" = "1"
register "jkdet_pull_enable" = "0" # R389
register "jkdet_polarity" = "1" # ActiveLow
register "vref_impedance" = "2" # 125kOhm
register "micbias_voltage" = "6" # 2.754
register "sar_threshold_num" = "4"
register "sar_threshold[0]" = "0x0c"
register "sar_threshold[1]" = "0x1e"
register "sar_threshold[2]" = "0x38"
register "sar_threshold[3]" = "0x60"
register "sar_hysteresis" = "1"
register "sar_voltage" = "0" # VDDA
register "sar_compare_time" = "0" # 500ns
register "sar_sampling_time" = "0" # 2us
register "short_key_debounce" = "2" # 100ms
register "jack_insert_debounce" = "7" # 512ms
register "jack_eject_debounce" = "7" # 512ms
device i2c 1a on end
end
chip drivers/i2c/generic
register "hid" = ""INT343B""
register "desc" = ""SSM4567 Left Speaker Amp""
register "uid" = "0"
device i2c 34 on end
end
chip drivers/i2c/generic
register "hid" = ""INT343B""
register "desc" = ""SSM4567 Right Speaker Amp""
register "uid" = "1"
device i2c 35 on end
end
end # I2C #4
device pci 1c.0 on
chip drivers/intel/wifi
register "wake" = "GPE0_DW0_16"
device pci 00.0 on end
end
end # PCI Express Port 1
device pci 1c.1 off end # PCI Express Port 2
device pci 1c.2 off end # PCI Express Port 3
device pci 1c.3 off end # PCI Express Port 4
device pci 1c.4 off end # PCI Express Port 5
device pci 1c.5 off end # PCI Express Port 6
device pci 1c.6 off end # PCI Express Port 7
device pci 1c.7 off end # PCI Express Port 8
device pci 1d.0 off end # PCI Express Port 9
device pci 1d.1 off end # PCI Express Port 10
device pci 1d.2 off end # PCI Express Port 11
device pci 1d.3 off end # PCI Express Port 12
device pci 1e.0 on end # UART #0
device pci 1e.1 off end # UART #1
device pci 1e.2 off end # GSPI #0
device pci 1e.3 off end # GSPI #1
device pci 1e.4 on end # eMMC
device pci 1e.5 off end # SDIO
device pci 1e.6 on end # SDCard
device pci 1f.0 on
chip drivers/pc80/tpm
device pnp 0c31.0 on end
end
chip ec/google/chromeec
device pnp 0c09.0 on end
end
end # LPC Interface
device pci 1f.1 on end # P2SB
device pci 1f.2 on end # Power Management Controller
device pci 1f.3 on end # Intel HDA
device pci 1f.4 on end # SMBus
device pci 1f.5 on end # PCH SPI
device pci 1f.6 off end # GbE
end
end

84
src/mainboard/google/glados/variants/glados/overridetree.cb Normal file
View file

@ -0,0 +1,84 @@
chip soc/intel/skylake
register "ScsSdCardEnabled" = "2"
register "PmConfigSlpS4MinAssert" = "1" # 1s
register "PmConfigSlpSusMinAssert" = "1" # 500ms
register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC2)" # Type-C Port (board)
register "usb2_ports[1]" = "USB2_PORT_MAX(OC3)" # Type-C Port (flex)
register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
register "usb2_ports[4]" = "USB2_PORT_MID(OC0)" # Type-A Port 1
register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera
register "usb2_ports[8]" = "USB2_PORT_MID(OC1)" # Type-A Port 2
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-C Port (board)
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)" # Type-C Port (flex)
register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port 1
register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port 2
# PL2 override 15W
register "tdp_pl2_override" = "15"
# Send an extra VR mailbox command for the supported MPS IMVP8 model
register "SendVrMbxCmd" = "1"
# TCC of 90C
register "tcc_offset" = "10"
device domain 0 on
device pci 15.0 on
chip drivers/i2c/generic
register "hid" = ""ELAN0001""
register "desc" = ""ELAN Touchscreen""
register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
device i2c 10 on end
end
end # I2C #0
device pci 15.1 on
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
register "desc" = ""ELAN Touchpad""
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)"
register "wake" = "GPE0_DW0_05"
device i2c 15 on end
end
end # I2C #1
device pci 19.2 on
chip drivers/i2c/nau8825
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)"
register "jkdet_enable" = "1"
register "jkdet_pull_enable" = "0" # R389
register "jkdet_polarity" = "1" # ActiveLow
register "vref_impedance" = "2" # 125kOhm
register "micbias_voltage" = "6" # 2.754
register "sar_threshold_num" = "4"
register "sar_threshold[0]" = "0x0c"
register "sar_threshold[1]" = "0x1e"
register "sar_threshold[2]" = "0x38"
register "sar_threshold[3]" = "0x60"
register "sar_hysteresis" = "1"
register "sar_voltage" = "0" # VDDA
register "sar_compare_time" = "0" # 500ns
register "sar_sampling_time" = "0" # 2us
register "short_key_debounce" = "2" # 100ms
register "jack_insert_debounce" = "7" # 512ms
register "jack_eject_debounce" = "7" # 512ms
device i2c 1a on end
end
chip drivers/i2c/generic
register "hid" = ""INT343B""
register "desc" = ""SSM4567 Left Speaker Amp""
register "uid" = "0"
device i2c 34 on end
end
chip drivers/i2c/generic
register "hid" = ""INT343B""
register "desc" = ""SSM4567 Right Speaker Amp""
register "uid" = "1"
device i2c 35 on end
end
end # I2C #4
device pci 1e.6 on end # SDCard
end
end

67
src/mainboard/google/glados/variants/lars/overridetree.cb Normal file
View file

@ -0,0 +1,67 @@
chip soc/intel/skylake
register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC0)" # Type-C Port 1
register "usb2_ports[1]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera
register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
register "usb2_ports[4]" = "USB2_PORT_MID(OC2)" # Type-A Port (card)
register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # SD
register "usb2_ports[8]" = "USB2_PORT_LONG(OC3)" # Type-A Port (board)
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # SD
register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port (card)
register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port (board)
device domain 0 on
device pci 15.0 on
chip drivers/i2c/generic
register "hid" = ""ELAN0001""
register "desc" = ""ELAN Touchscreen""
register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
device i2c 10 on end
end
end # I2C #0
device pci 15.1 on
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
register "desc" = ""ELAN Touchpad""
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)"
register "wake" = "GPE0_DW0_05"
device i2c 15 on end
end
end # I2C #1
device pci 19.2 on
chip drivers/i2c/nau8825
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)"
register "jkdet_enable" = "1"
register "jkdet_pull_enable" = "1"
register "jkdet_pull_up" = "1"
register "jkdet_polarity" = "1" # ActiveLow
register "vref_impedance" = "2" # 125kOhm
register "micbias_voltage" = "6" # 2.754
register "sar_threshold_num" = "4"
register "sar_threshold[0]" = "0x08"
register "sar_threshold[1]" = "0x12"
register "sar_threshold[2]" = "0x26"
register "sar_threshold[3]" = "0x73"
register "sar_hysteresis" = "0"
register "sar_voltage" = "6"
register "sar_compare_time" = "1" # 1us
register "sar_sampling_time" = "1" # 4us
register "short_key_debounce" = "3" # 30ms
register "jack_insert_debounce" = "7" # 512ms
register "jack_eject_debounce" = "0"
device i2c 1a on end
end
end # I2C #4
device pci 1e.6 off end # SDCard
device pci 1f.3 on
chip drivers/generic/max98357a
register "hid" = ""MX98357A""
register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B2)"
register "sdmode_delay" = "5"
device generic 0 on end
end
end # Intel HDA
end
end

249
src/mainboard/google/glados/variants/sentry/devicetree.cb
View file

@ -1,249 +0,0 @@
chip soc/intel/skylake
register "gpu_pp_up_delay_ms" = "200"
register "gpu_pp_down_delay_ms" = " 50"
register "gpu_pp_cycle_delay_ms" = "500"
register "gpu_pp_backlight_on_delay_ms" = " 1"
register "gpu_pp_backlight_off_delay_ms" = "200"
register "gpu_pch_backlight_pwm_hz" = "1000"
# Enable deep Sx states
register "deep_s3_enable_ac" = "0"
register "deep_s3_enable_dc" = "0"
register "deep_s5_enable_ac" = "1"
register "deep_s5_enable_dc" = "1"
register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN"
# GPE configuration
# Note that GPE events called out in ASL code rely on this
# route. i.e. If this route changes then the affected GPE
# offset bits also need to be changed.
register "gpe0_dw0" = "GPP_B"
register "gpe0_dw1" = "GPP_D"
register "gpe0_dw2" = "GPP_E"
# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
register "gen1_dec" = "0x00fc0801"
register "gen2_dec" = "0x000c0201"
# Enable "Intel Speed Shift Technology"
register "speed_shift_enable" = "1"
# Enable DPTF
register "dptf_enable" = "1"
# FSP Configuration
register "ProbelessTrace" = "0"
register "EnableLan" = "0"
register "EnableSata" = "0"
register "SataSalpSupport" = "0"
register "SataMode" = "0"
register "SataPortsEnable[0]" = "0"
register "EnableAzalia" = "1"
register "DspEnable" = "1"
register "IoBufferOwnership" = "3"
register "EnableTraceHub" = "0"
register "SsicPortEnable" = "0"
register "SmbusEnable" = "1"
register "Cio2Enable" = "0"
register "ScsEmmcEnabled" = "1"
register "ScsEmmcHs400Enabled" = "1"
register "ScsSdCardEnabled" = "2"
register "PttSwitch" = "0"
register "SkipExtGfxScan" = "1"
register "Device4Enable" = "1"
register "HeciEnabled" = "0"
register "SaGv" = "3"
register "PmConfigSlpS3MinAssert" = "2" # 50ms
register "PmConfigSlpS4MinAssert" = "4" # 4s
register "PmConfigSlpSusMinAssert" = "3" # 4s
register "PmConfigSlpAMinAssert" = "3" # 2s
register "PmTimerDisabled" = "1"
register "pirqa_routing" = "PCH_IRQ11"
register "pirqb_routing" = "PCH_IRQ10"
register "pirqc_routing" = "PCH_IRQ11"
register "pirqd_routing" = "PCH_IRQ11"
register "pirqe_routing" = "PCH_IRQ11"
register "pirqf_routing" = "PCH_IRQ11"
register "pirqg_routing" = "PCH_IRQ11"
register "pirqh_routing" = "PCH_IRQ11"
# Enable Root port 1
register "PcieRpEnable[0]" = "1"
# Enable CLKREQ#
register "PcieRpClkReqSupport[0]" = "1"
# RP 1 uses SRCCLKREQ1#
register "PcieRpClkReqNumber[0]" = "1"
register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC0)" # Type-C Port 1
register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC1)" # Type-C Port 2
register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
register "usb2_ports[4]" = "USB2_PORT_MID(OC2)" # Type-A Port (card)
register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera
register "usb2_ports[8]" = "USB2_PORT_LONG(OC3)" # Type-A Port (board)
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Type-C Port 2
register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port (card)
register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port (board)
# Must leave UART0 enabled or SD/eMMC will not work as PCI
register "SerialIoDevMode" = "{
[PchSerialIoIndexI2C0] = PchSerialIoPci,
[PchSerialIoIndexI2C1] = PchSerialIoPci,
[PchSerialIoIndexI2C2] = PchSerialIoDisabled,
[PchSerialIoIndexI2C3] = PchSerialIoDisabled,
[PchSerialIoIndexI2C4] = PchSerialIoPci,
[PchSerialIoIndexI2C5] = PchSerialIoDisabled,
[PchSerialIoIndexSpi0] = PchSerialIoDisabled,
[PchSerialIoIndexSpi1] = PchSerialIoDisabled,
[PchSerialIoIndexUart0] = PchSerialIoPci,
[PchSerialIoIndexUart1] = PchSerialIoDisabled,
[PchSerialIoIndexUart2] = PchSerialIoSkipInit,
}"
# I2C0 is 3.3V
register "i2c_voltage[0]" = "I2C_VOLTAGE_3V3"
# I2C4 is 1.8V
register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8"
# PL2 override 25W
register "tdp_pl2_override" = "25"
# Send an extra VR mailbox command for the PS4 exit issue
register "SendVrMbxCmd" = "2"
# Use default SD card detect GPIO configuration
register "sdcard_cd_gpio_default" = "GPP_A7"
# Lock Down
register "common_soc_config" = "{
.chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT,
}"
device cpu_cluster 0 on
device lapic 0 on end
end
device domain 0 on
device pci 00.0 on end # Host Bridge
device pci 02.0 on end # Integrated Graphics Device
device pci 14.0 on end # USB xHCI
device pci 14.1 off end # USB xDCI (OTG)
device pci 14.2 on end # Thermal Subsystem
device pci 15.0 on
chip drivers/i2c/generic
register "hid" = ""RAYD0001""
register "desc" = ""Raydium Touchscreen""
register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
device i2c 39 on end
end
end # I2C #0
device pci 15.1 on
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
register "desc" = ""ELAN Touchpad""
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)"
register "wake" = "GPE0_DW0_05"
device i2c 15 on end
end
end # I2C #1
device pci 15.2 off end # I2C #2
device pci 15.3 off end # I2C #3
device pci 16.0 on end # Management Engine Interface 1
device pci 16.1 off end # Management Engine Interface 2
device pci 16.2 off end # Management Engine IDE-R
device pci 16.3 off end # Management Engine KT Redirection
device pci 16.4 off end # Management Engine Interface 3
device pci 17.0 off end # SATA
device pci 19.0 on end # UART #2
device pci 19.1 off end # I2C #5
device pci 19.2 on
chip drivers/i2c/nau8825
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)"
register "jkdet_enable" = "1"
register "jkdet_pull_enable" = "1"
register "jkdet_pull_up" = "1"
register "jkdet_polarity" = "1" # ActiveLow
register "vref_impedance" = "2" # 125kOhm
register "micbias_voltage" = "6" # 2.754
register "sar_threshold_num" = "4"
register "sar_threshold[0]" = "0x08"
register "sar_threshold[1]" = "0x12"
register "sar_threshold[2]" = "0x26"
register "sar_threshold[3]" = "0x73"
register "sar_hysteresis" = "0"
register "sar_voltage" = "6"
register "sar_compare_time" = "1" # 1us
register "sar_sampling_time" = "1" # 4us
register "short_key_debounce" = "3" # 30ms
register "jack_insert_debounce" = "7" # 512ms
register "jack_eject_debounce" = "0"
device i2c 1a on end
end
chip drivers/i2c/generic
register "hid" = ""INT343B""
register "desc" = ""SSM4567 Left Speaker Amp""
register "uid" = "0"
register "device_present_gpio" = "GPP_E3"
device i2c 34 on end
end
chip drivers/i2c/generic
register "hid" = ""INT343B""
register "desc" = ""SSM4567 Right Speaker Amp""
register "uid" = "1"
register "device_present_gpio" = "GPP_E3"
device i2c 35 on end
end
end # I2C #4
device pci 1c.0 on
chip drivers/intel/wifi
register "wake" = "GPE0_DW0_16"
device pci 00.0 on end
end
end # PCI Express Port 1
device pci 1c.1 off end # PCI Express Port 2
device pci 1c.2 off end # PCI Express Port 3
device pci 1c.3 off end # PCI Express Port 4
device pci 1c.4 off end # PCI Express Port 5
device pci 1c.5 off end # PCI Express Port 6
device pci 1c.6 off end # PCI Express Port 7
device pci 1c.7 off end # PCI Express Port 8
device pci 1d.0 off end # PCI Express Port 9
device pci 1d.1 off end # PCI Express Port 10
device pci 1d.2 off end # PCI Express Port 11
device pci 1d.3 off end # PCI Express Port 12
device pci 1e.0 on end # UART #0
device pci 1e.1 off end # UART #1
device pci 1e.2 off end # GSPI #0
device pci 1e.3 off end # GSPI #1
device pci 1e.4 on end # eMMC
device pci 1e.5 off end # SDIO
device pci 1e.6 on end # SDCard
device pci 1f.0 on
chip drivers/pc80/tpm
device pnp 0c31.0 on end
end
chip ec/google/chromeec
device pnp 0c09.0 on end
end
end # LPC Interface
device pci 1f.1 on end # P2SB
device pci 1f.2 on end # Power Management Controller
device pci 1f.3 on
chip drivers/generic/max98357a
register "hid" = ""MX98357A""
register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E3)"
register "device_present_gpio" = "GPP_E3"
register "device_present_gpio_invert" = "1"
register "sdmode_delay" = "5"
device generic 0 on end
end
end # Intel HDA
device pci 1f.4 on end # SMBus
device pci 1f.5 on end # PCH SPI
device pci 1f.6 off end # GbE
end
end

91
src/mainboard/google/glados/variants/sentry/overridetree.cb Normal file
View file

@ -0,0 +1,91 @@
chip soc/intel/skylake
register "ScsSdCardEnabled" = "2"
register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC0)" # Type-C Port 1
register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC1)" # Type-C Port 2
register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
register "usb2_ports[4]" = "USB2_PORT_MID(OC2)" # Type-A Port (card)
register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera
register "usb2_ports[8]" = "USB2_PORT_LONG(OC3)" # Type-A Port (board)
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Type-C Port 2
register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port (card)
register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port (board)
# I2C0 is 3.3V
register "i2c_voltage[0]" = "I2C_VOLTAGE_3V3"
# Use default SD card detect GPIO configuration
register "sdcard_cd_gpio_default" = "GPP_A7"
device domain 0 on
device pci 15.0 on
chip drivers/i2c/generic
register "hid" = ""RAYD0001""
register "desc" = ""Raydium Touchscreen""
register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
device i2c 39 on end
end
end # I2C #0
device pci 15.1 on
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
register "desc" = ""ELAN Touchpad""
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)"
register "wake" = "GPE0_DW0_05"
device i2c 15 on end
end
end # I2C #1
device pci 19.2 on
chip drivers/i2c/nau8825
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)"
register "jkdet_enable" = "1"
register "jkdet_pull_enable" = "1"
register "jkdet_pull_up" = "1"
register "jkdet_polarity" = "1" # ActiveLow
register "vref_impedance" = "2" # 125kOhm
register "micbias_voltage" = "6" # 2.754
register "sar_threshold_num" = "4"
register "sar_threshold[0]" = "0x08"
register "sar_threshold[1]" = "0x12"
register "sar_threshold[2]" = "0x26"
register "sar_threshold[3]" = "0x73"
register "sar_hysteresis" = "0"
register "sar_voltage" = "6"
register "sar_compare_time" = "1" # 1us
register "sar_sampling_time" = "1" # 4us
register "short_key_debounce" = "3" # 30ms
register "jack_insert_debounce" = "7" # 512ms
register "jack_eject_debounce" = "0"
device i2c 1a on end
end
chip drivers/i2c/generic
register "hid" = ""INT343B""
register "desc" = ""SSM4567 Left Speaker Amp""
register "uid" = "0"
register "device_present_gpio" = "GPP_E3"
device i2c 34 on end
end
chip drivers/i2c/generic
register "hid" = ""INT343B""
register "desc" = ""SSM4567 Right Speaker Amp""
register "uid" = "1"
register "device_present_gpio" = "GPP_E3"
device i2c 35 on end
end
end # I2C #4
device pci 1e.6 on end # SDCard
device pci 1f.3 on
chip drivers/generic/max98357a
register "hid" = ""MX98357A""
register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E3)"
register "device_present_gpio" = "GPP_E3"
register "device_present_gpio_invert" = "1"
register "sdmode_delay" = "5"
device generic 0 on end
end
end # Intel HDA
end
end